LILYGO T-Deck Plus
Dev BoardESP32-S3 handheld dev board with QWERTY keyboard, trackball, 2.8" IPS LCD, LoRa SX1262, GPS, speaker, dual microphones, and 2000mAh battery in an ABS case.
LILYGO T3 LoRa32 V1.6.1
Dev BoardESP32-PICO-D4 development board with LoRa SX1276/SX1278 radio, 0.96\" SSD1306 OLED, microSD slot, WiFi, Bluetooth 4.2, and LiPo battery support in a compact 66×36mm form factor.
LILYGO T5 E-Paper S3 Pro Lite
Dev BoardA pocket-sized ESP32-S3 development board with a 4.7-inch capacitive touchscreen e-paper display (960×540, 16 grayscale), anti-glare glass, warm-toned backlight, MagSafe wireless charging, and compreh
LILYGO T-Lite W5500
ESP32Ultra-compact ESP32 development board with W5500 SPI Ethernet, 0.96" OLED display, Wi-Fi, Bluetooth 4.2, and USB-C. Only 29.5×23mm for embedded IoT gateway projects.
LILYGO T-Watch S3
smartwatchOpen-source ESP32-S3 smartwatch with LoRa, 1.3" 240×240 IPS touchscreen, haptic feedback, accelerometer, speaker, microphone, IR transmitter, and 1500mAh battery. Supports Meshtastic, ESPHome, Arduino
LILYGO T-Display
Dev BoardCompact ESP32-PICO-D4 development board with integrated 1.14-inch ST7789V IPS LCD (135×240, 260 PPI), WiFi, Bluetooth 4.2/BLE, and Arduino/MicroPython support.
LILYGO T-Beam
Dev BoardESP32 development board combining LoRa radio (SX1276/SX1278), u-blox NEO-6M GPS, 0.96" OLED display, and 18650 battery support — the go-to board for Meshtastic and LoRa tracking projects.
LILYGO T-QT Pro
Dev BoardUltra-compact ESP32-S3 board with a 0.85-inch GC9107 IPS display (128×128), 2MB PSRAM, WiFi, BLE 5.0, and USB-C — one of the smallest ESP32-S3 development boards available.
LILYGO T-Display S3
Dev BoardESP32-S3 development board with 1.9-inch ST7789V TFT display (170×320), optional capacitive touch, 16MB flash, 8MB PSRAM, and USB-C. Popular for smart displays and IoT dashboards.
LILYGO T-SIM7000G
Dev BoardESP32 board with SIMCom SIM7000G multi-band LTE-M/NB-IoT modem, GPS, 8MB PSRAM, USB-C, and 18650 battery support — designed for global cellular IoT deployments.
LILYGO T-Watch 2020 V3
smartwatchProgrammable ESP32 smartwatch with 1.54-inch touch IPS display, BMA423 accelerometer, PCF8563 RTC, PDM microphone, speaker, IR transmitter, and vibration motor — fully open-source and Arduino/MicroPyt
LILYGO T-Higrow
Dev BoardESP32 plant sensor board with capacitive soil moisture, soil fertility, BH1750 light sensor, and DHT11/BME280 temperature/humidity — WiFi-connected smart plant care for gardens and greenhouses.
Mesh Detect 2
Sensor ModuleOpen-source ESP32-S3 device that detects FAA Remote ID drone broadcasts and BLE devices, reporting alerts over the Meshtastic LoRa mesh network. Uses XIAO ESP32-S3 + Heltec V3.
LILYGO T-Display S3 AMOLED
Dev BoardESP32-S3 board with 1.91-inch RM67162 AMOLED display (240×536), optional touch, 16MB flash, 8MB PSRAM, and USB-C — delivering vivid OLED visuals for IoT dashboards and smart displays.
LILYGO T-Call SIM800
Dev BoardESP32 board with SIM800L 2G GSM/GPRS modem for SMS alerts, voice calls, and cellular data — ideal for remote monitoring and IoT projects needing cellular fallback on a budget.
LILYGO T-Pico C3
Dev BoardDual-MCU board combining RP2040 and ESP32-C3, with a 1.14-inch ST7789V display, WiFi, BLE 5.0, and Arduino/MicroPython support — bringing Raspberry Pi Pico connectivity to wireless IoT projects.
LILYGO T-Dongle S3
Dev BoardESP32-S3 USB-A dongle with a 0.96-inch ST7735 color display (80×160), 16MB flash, WiFi, and BLE 5.0 — a compact plug-in development stick for IoT, media, and wireless sensor nodes.
LILYGO T-Micro32 Plus
ESP32LILYGO T-Micro32 Plus is an upgraded compact ESP32 module with 8MB flash, 2MB PSRAM, expanded GPIO, and an improved RED C3 ceramic antenna for stronger wireless performance.
LILYGO T-Embed
Dev BoardESP32-S3 all-in-one media board with 1.9-inch TFT display, rotary encoder, dual microphones, 1W speaker, 7 RGB LEDs, GROVE connector, and LiPo battery support — ideal for audio players and interactive
LILYGO T-RGB
Dev BoardESP32-S3 board with a circular 2.1\" or 2.8\" ST7701S RGB display (480×480) and capacitive touch — perfect for smart home controllers, round-display clocks, and interactive dashboards.
LILYGO T-Camera S3
Dev BoardESP32-S3 camera development board with OV2640 2MP sensor, 0.96-inch OLED display, 16MB flash, 8MB PSRAM, WiFi, and BLE 5.0 — a ready-to-use platform for WiFi streaming cameras and computer vision proj
LILYGO T-Echo
Dev BoardnRF52840 + SX1262 LoRa + L76K GPS all-in-one board with 1.54-inch e-paper display, 850mAh battery, Thread, Zigbee, and BLE 5.0 — runs Meshtastic, SoftRF, and custom NRF firmware out of the box.
LILYGO T-Internet-POE
Dev BoardESP32 board with LAN8720 10/100 Mbps Ethernet, Power-over-Ethernet (PoE 36–57V), WiFi, and BLE 4.2 — ideal for wired IoT gateways, industrial automation, and network-connected data loggers.
LILYGO T-Deck
Dev BoardESP32-S3 handheld terminal with 2.8-inch IPS display, mini QWERTY keyboard, trackball, optional SX1262 LoRa, speaker, and microphone — a self-contained portable communicator running Meshtastic and Mes
LILYGO T-HMI
Dev BoardESP32-S3 HMI development board with a 2.8-inch resistive touchscreen, GROVE connectors, 16MB flash, 8MB PSRAM, and USB-C — designed for industrial HMI panels and interactive control interfaces.
LILYGO T-ETH-Lite
Dev BoardCompact ESP32-S3 development board with wired Ethernet (W5500 SPI), WiFi, BLE, microSD slot, and optional PoE and camera shields for reliable networked IoT edge nodes.
LILYGO T-Lora Dual
Dev BoardLILYGO T-Lora Dual is a compact board featuring dual LR1121 multi-band LoRa radios supporting both sub-GHz and 2.4 GHz bands, with ExpressLRS support for long-range RC and telemetry applications.
LILYGO T-Watch Ultra
Dev BoardPremium ESP32-S3 smartwatch development platform with 2.06" AMOLED touchscreen, LoRa SX1262, GNSS, NFC, MAX98357A audio, DRV2605 haptic, AXP2101 PMIC, and 1100mAh battery.
LILYGO T-Glass
Dev BoardWearable ESP32-S3 development board with 1.1" full-color AMOLED display in a glasses prism form factor, microphone, RTC, and touch button for head-up display applications.
LILYGO T-Halow
Dev BoardESP32-S3 development board with WiFi HaLow (802.11ah) sub-GHz radio for long-range IoT deployments, plus standard 2.4GHz WiFi, BLE 5.0, microSD, and 18650 battery support.
LILYGO T-Display S3 Pro
Dev BoardUpgraded T-Display S3 with a larger 2.33" IPS touchscreen, ESP32-S3R8, OTG charging via SY6970, QWIIC ports, ambient light/proximity sensor, and optional camera module expansion via POGOpin.
LILYGO T-Display S3 AMOLED 1.64
ESP32 S3ESP32-S3 development board with a 1.64" ICNA3311 AMOLED display at 280×456 resolution, 16MB Flash, 8MB PSRAM, Wi-Fi and Bluetooth 5 LE connectivity.
LILYGO T-TWR
Dev BoardESP32-S3 walkie-talkie development board with SA868 UHF/VHF radio module, 0.96" OLED display, rotary encoder, WiFi, BLE, and 18650 battery support for two-way radio projects.
LILYGO T-Beam Supreme
Dev BoardUpgraded T-Beam with ESP32-S3FN8, QMI8658 6-axis IMU, LoRa SX1262, dual GPS options (L76K or u-blox), SoftRF firmware support, and multi-frequency bands for Meshtastic and aircraft tracking.
LILYGO T-Lora Pager
Dev BoardCompact LoRa pager with ESP32-S3, 2.33" touchscreen, QWERTY keyboard, u-blox GNSS, BHI260AP AI IMU, ES8311 audio codec, RFID/NFC, and foldable antenna for off-grid messaging.
LILYGO T-Watch S3 Plus
Dev BoardESP32-S3 smartwatch dev board with LoRa SX1262, GNSS, BMA423 accelerometer, MAX98357A audio, DRV2605 haptic feedback, AXP2101 PMIC, and 940mAh battery for wearable LoRa projects.
LILYGO T-Display S3 AMOLED Plus
ESP32 S3Enhanced ESP32-S3 AMOLED development board with 1.91" RM67162 display, onboard RTC, PMU, SD card slot, capacitive touch, metal shielding, and external FPC antenna.
LILYGO T-Deck Pro
Dev BoardESP32-S3 keyboard terminal with 3.1" e-paper touchscreen, LoRa SX1262, GPS, BHI260AP AI IMU, PCM5102A/ES8311 audio, 1400mAh battery, and optional 4G LTE (A7682E) for off-grid terminal applications.
LILYGO T-TWR Plus
Dev BoardEnhanced ESP32-S3 two-way radio board with SA868 UHF/VHF module, L76K GNSS, 1.3" OLED, AXP2102 PMIC, WS2812 RGB LED, TF card, and PPT button for APRS and walkie-talkie applications.
LILYGO T-Embed CC1101
Dev BoardESP32-S3 multi-protocol RF tool with CC1101 sub-GHz transceiver (300–928 MHz), 13.56 MHz RFID, IR transmit/receive, 1.9" IPS display, and rotary encoder for RF analysis and replay attacks.
LILYGO T7 S3
Dev BoardUltra-affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, USB 3.0, QWIIC/Stemma QT connector, power switch, and breadboard-compatible pinout at under $8.
LILYGO T-CAN485
Dev BoardESP32 development board with integrated CAN bus and RS-485 transceivers, TF card, WiFi, and BLE for industrial IoT, Modbus, and automotive OBD-II applications with 5–12V wide-range power input.
LILYGO T-QT C6
Dev BoardTiny ESP32-C6 dev board with WiFi 6, BLE 5, Zigbee/Thread (802.15.4), 0.85" 128×128 touchscreen, LiPo battery charging, and breathing LED in a thumbnail-sized form factor.
LILYGO T-Circle S3
Dev BoardCompact ESP32-S3 board with a 0.75" round 160×160 TFT LCD (GC9D01N), 16MB flash, 8MB PSRAM, WiFi, and BLE 5 for wearable watchface and circular display applications.
LILYGO T-Relay S3
Dev BoardESP32-S3 board with 6 onboard relays, 16MB flash, 8MB PSRAM, WiFi, and BLE for ESPHome smart home automation, controlling lights, appliances, and HVAC systems.
LILYGO T-Energy S3
Dev BoardAffordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, integrated 18650 battery holder, WiFi, and BLE 5.0 for battery-powered IoT sensor nodes under $10.
LILYGO T-Knob
Dev BoardSmart rotary encoder controller based on ESP32-C6 with WiFi 6, BLE 5, Zigbee/Thread, 4 RGB LEDs, buzzer, and magnetic Hall-effect knob for wireless volume control and smart home automation.
LILYGO T-Panel S3
Dev BoardDual-MCU smart panel (ESP32-S3 + ESP32-H2) with 4" 480×480 IPS LCD (ST7701S), WiFi, BLE, native Zigbee/Thread/Matter via H2 co-processor, and optional RS485/CAN FD expansion for wall-mounted smart hom
LILYGO T3 S3
Dev BoardESP32-S3 LoRa development board with 0.96" OLED display, multiple LoRa module options (SX1262/SX1276/SX1280/LR1121), WiFi, BLE, and 18650 battery support for Meshtastic and IoT applications.
LILYGO T-SIM7080G S3
Dev BoardESP32-S3 development board with SIM7080G NB-IoT/LTE-M/GNSS module, 16MB flash, 8MB PSRAM, 18650 battery support, and USB-C connectivity for low-power IoT applications.
LILYGO T-SIM7070G
ESP32ESP32-WROVER-E development board with SIM7070G NB-IoT/LTE-M/GPRS modem, GPS, Wi-Fi, Bluetooth 4.2, MicroSD, and solar charging input for ultra-low-power IoT applications.
LILYGO T-Embed SI4732
Dev BoardESP32-S3 board with SI4732-A10 AM/FM/SW/LW radio receiver, 1.9" IPS display, 900mAh battery, and rotary encoder for a portable software-defined radio experience.
LILYGO T7-C6
Dev BoardCompact ESP32-C6 development board with WiFi 6, BLE 5, and IEEE 802.15.4 (Zigbee/Thread/Matter) support, featuring 4MB flash and USB-C for next-generation IoT protocols.
LILYGO T-Display Bar
Dev BoardESP32-S3 development board with a unique wide bar-format display, 16MB flash, 8MB PSRAM, and USB-C for information display and custom UI projects.
LILYGO T-Display AMOLED Lite
ESP32 S3Compact ESP32-S3 development board featuring a 1.47" RM67162 AMOLED display with QSPI interface, 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and battery charging support.
LILYGO T5 V2.3.1
Display ModuleLILYGO T5 V2.3.1 is a 2.13-inch e-paper display module with SSD1680 driver, supporting 212×104 black-and-white output via SPI. Ultra-low power design retains the image without any power supply.
LILYGO T-Display Keyboard
ESP32Compact ESP32 development board combining a physical keyboard with a 1.14" IPS display, USB-C charging, multiple interfaces, and optional 2800mAh battery in shell configuration.
LILYGO T5s 2.7 inch E-Paper
ESP32LILYGO T5s is an ESP32 development board with a 2.7-inch 264×176 e-paper display, onboard I2S audio (MAX98357A amplifier + ICS43434 MEMS mic), 500mA battery management, and TF card support.
LILYGO T8-C3
ESP32 C3LILYGO T8-C3 is a compact ESP32-C3 development board featuring Wi-Fi, BLE 5.0, 4MB flash, TF card slot, and USB Type-C, requiring the T-U2T adapter for programming.
LILYGO T-FPGA
FPGALILYGO T-FPGA is a development board combining an ESP32-S3 microcontroller with a Gowin GW1NSR-4C FPGA chip, enabling flexible hardware logic design alongside Wi-Fi and Bluetooth connectivity.
LILYGO T-Keyboard S3 Pro
ESP32 S3Advanced ESP32-S3 programmable keyboard board with 4 built-in 0.85" TFT displays, 14 RGB LEDs, rotary encoder, STM32 co-processor, magnetic connectors for daisy-chaining up to 6 units.
LILYGO T-Lora C6
Dev BoardLILYGO T-Lora C6 is a compact LoRa development board combining the ESP32-C6 module with SX1262 radio, supporting Wi-Fi 6, Bluetooth 5 LE, Zigbee, Thread, and sub-GHz LoRa communication.
LILYGO T-OI Plus
ESP32 C3LILYGO T-OI Plus is a compact ESP32-C3 development board with Wi-Fi, BLE 5.0, Grove connectors, and optional 16340 battery holder, designed to fit Sonoff BASICR2 enclosures.
LILYGO T-Display S3 Long
ESP32 S3ESP32-S3 development board with an elongated 3.4" capacitive touch TFT LCD (180×640 resolution), 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and optional enclosure variant.
LILYGO T5 2.13inch E-Paper
ESP32LILYGO T5 2.13inch E-Paper is an ESP32-D0WDQ6 V3 development board with a 2.13-inch 212×104 e-ink display supporting 4-level grayscale, 4MB flash, TF card slot, and battery management with 4 user butt
LILYGO T-SIM7600E
ESP32ESP32-based development board with SIM7600E-H 4G LTE Cat-4 modem, GPS, Wi-Fi, Bluetooth, 18650 battery holder with solar charging, and dual USB-C ports for high-speed IoT connectivity.
LILYGO T-Radar
Sensor ModuleLILYGO T-Radar is a radar sensor expansion module based on the Acconeer A121 pulsed coherent radar, designed for presence detection and distance measurement with LILYGO motherboards.
LILYGO T-Relay
ESP32ESP32 development board with 4 onboard HRS4H-S-DC5V relays, 4MB flash, 8MB PSRAM, WiFi, BLE 4.2, and optocoupler-isolated GPIO expansion — designed for wireless remote switch control of AC/DC loads.
LILYGO T-Echo Plus
Dev BoardEnhanced T-Echo with nRF52840, SX1262 LoRa, L76K GPS, BHI260AP IMU, 2400mAh battery, 1.54-inch e-paper display, vibration motor, buzzer, and 1/4-inch mount — Meshtastic-ready with extended runtime.
LILYGO T-01C3
ESP32 C3LILYGO T-01C3 is an ultra-compact ESP32-C3 RISC-V module with Wi-Fi and BLE 5.0, available with or without pre-soldered pins, featuring 5.33µA deep sleep current.
LILYGO T-Keyboard
ESP32 C3Compact ESP32-C3 keyboard terminal with a built-in 0.99" display, Wi-Fi, Bluetooth 4.2, 400mAh battery, and a 3D-printed shell for portable wireless input applications.
LILYGO T-Wrist E-Paper
ESP32LILYGO T-Wrist E-Paper is an ESP32-based wearable development board with a 1.54-inch 200×200 e-paper display, vibration motor, optional GPS (LG77 GNSS), WiFi, Bluetooth 4.2, and 3D-printable watch she
LILYGO FabGL VGA32
ESP32ESP32 development board with VGA video output, dual PS/2 ports for keyboard and mouse, 4MB flash, and the FabGL graphics library — a retro computing platform for VGA terminal emulators and classic gam
OpenEPaperLink Access Point C6+S3
Access PointOpen-source dual-MCU access point for wirelessly managing e-paper tags. ESP32-C6 handles WiFi connectivity while ESP32-S3 serves as a 2.4GHz RF transceiver for IEEE 802.15.4 communication with electro
LILYGO T-Weigh
ESP32ESP32 development board combining 4-channel HX711 load cell amplifiers with LoRa SX1262 radio (868/915 MHz) for wireless weight measurement and IoT scale applications over long-range LoRa networks.
LILYGO T-Echo Lite
Dev BoardSimplified T-Echo with nRF52840, SX1262 LoRa, and optional L76K GPS — a low-cost, low-power LoRa node and Meshtastic-compatible board for off-grid mesh networking.
LILYGO T-SIM A7670E
ESP32ESP32-WROVER-E development board with A7670E LTE Cat-1 modem supporting voice calls, SMS, and GPS positioning. Available with multiple regional frequency variants for global 4G deployments.
LILYGO T-Micro32 V2.0
ESP32LILYGO T-Micro32 V2.0 is a 45%-smaller ESP32 PICO-D4 module with integrated IPEX antenna connector, designed for space-constrained embedded product designs.
LILYGO T-Mini E-Paper S3
ESP32 S3LILYGO T-Mini E-Paper S3 is a compact ESP32-S3 board with a 1.02-inch 128×80 e-paper display, 4MB flash, 2MB PSRAM, WiFi, BLE 5, TF card slot, and support for 18350 battery. Available in 868MHz and 91
LILYGO T4
ESP32LILYGO T4 is an ESP32 development board with 8MB PSRAM, optional 2.2 or 2.4-inch ILI9341 TFT LCD display, Wi-Fi, Bluetooth 4.2 BLE, and Li-Po battery support.
LILYGO T-SimCam
ESP32 S3ESP32-S3 camera development board with mPCIe slot for LILYGO T-PCIE SIM cellular modules, supporting OV2640 or OV5640 cameras, 16MB flash, 8MB PSRAM, TF card, and I2S microphone for connected vision a
LILYGO T-Encoder Pro
Dev BoardESP32-S3 smart rotary encoder knob with 1.2-inch round AMOLED display, capacitive touch, buzzer, vibration motor, and dual Qwiic connectors — ideal for smart home control and media interfaces.
LILYGO T-Micro32 S3
ESP32 S3LILYGO T-Micro32 S3 is an ultra-compact ESP32-S3FH4R2 module with Wi-Fi, BLE 5.0, 4MB flash, 2MB PSRAM, and dual-core Xtensa LX7 processor in a minimal footprint.
LILYGO T-A7608E-H
ESP32ESP32-WROVER-E development board with A7608E-H LTE Cat-1 modem supporting voice, SMS, GPS, and multi-band LTE-FDD/TDD connectivity for Europe with 18650 battery support.
LILYGO T-TWR Rev2.1
Dev BoardLILYGO T-TWR Rev2.1 is an ESP32-S3 based programmable walkie-talkie board featuring the SA868 UHF/VHF radio module, GPS, OLED display, and battery support for amateur radio applications.
LILYGO T-TV
ESP32ESP32 desktop gadget with a 1.54-inch transparent blue OLED display, IR receiver, touch control, Wi-Fi, and Bluetooth. Ships with factory firmware featuring a clock, games, and animations.
LILYGO T-Internet-COM
ESP32ESP32 development board with LAN8720 Ethernet, 16MB flash, 8MB PSRAM, WS2812 RGB LED, SIM/TF card slots, and T-PCIE expansion support for industrial IoT, wired networking, and CAN bus applications.
LILYGO T3 S3 E-Paper
ESP32 S3LILYGO T3 S3 E-Paper is an ESP32-S3 LoRa development board with a 2.13-inch 250×122 e-paper display (DEPG0213BN), 4MB flash, 2MB PSRAM, WiFi, BLE 5, SX1262 LoRa transceiver, and LiPo battery support.
LILYGO T-Lion
ESP32ESP32-WROVER development board with 0.96-inch OLED display, five-way directional button, single 18650 battery holder, 8MB PSRAM, WiFi, and BLE 4.2 — a compact handheld IoT controller in a slim form fa
LILYGO T-Connect
Dev BoardESP32-S3 industrial communication board with three RS485 ports and one CAN bus — enables multi-protocol data switching for automation, sensor networks, and legacy equipment integration.
LILYGO T-Camera Plus S3
ESP32 S3ESP32-S3 camera development board with 8MB PSRAM, 16MB Flash, onboard microphone, MAX98357A I2S amplifier, speaker output, and choice of OV2640 or OV5640 camera sensor for audio-visual IoT application
LILYGO LoRa3 (T3 LoRa32 V1.6.1)
ESP32LILYGO LoRa3 (T3 LoRa32 V1.6.1) is an ESP32 development board combining Wi-Fi, BLE, and LoRa radio (SX1276/SX1278) with OLED display and TF card slot for IoT and mesh networking.
LILYGO T-Watch 2021
ESP32Programmable ESP32 smartwatch with 1.3-inch round GC9A01 IPS touchscreen (240×240), BMA423 accelerometer, vibration motor, RTC, WiFi, and BLE 4.2 — open-source and fully programmable with Arduino or M
LILYGO T-SIM7670G S3
ESP32 S3ESP32-S3-based development board with SIM7670G LTE Cat-1 modem, integrated GPS, Wi-Fi, Bluetooth 5, MicroSD, solar charging input, and 16 MB flash for high-performance IoT and asset tracking applicati
LILYGO T-Journal
ESP32Compact ESP32-PICO-D4 camera board with OV2640 2MP sensor, 0.91-inch SSD1306 OLED display, fisheye or normal lens options, WiFi, BLE, and LiPo battery support — a minimal wireless camera module for Io
LILYGO T-MixRF
Dev BoardLILYGO T-MixRF is a multi-protocol RF development board combining SX1262 LoRa sub-GHz radio with CC1101 FSK/OOK transceiver for versatile wireless protocol support and RF experimentation.
PicoGlitcher V3
Security ToolOpen-source voltage glitching tool for hardware security research, based on Raspberry Pi Pico 2 (RP2350) with dual high-power MOSFETs, 4 selectable voltage levels, and adjustable Schmitt trigger input
LILYGO T7 V1.3 Mini32 ESP32
ESP32Compact ESP32 development board (Mini32 form factor) with 4MB Flash, WiFi 802.11 b/g/n, Bluetooth 4.2, CH340C USB-to-serial, TP4054 LiPo charger, and 1.25mm JST battery connector — a classic breadboar
LILYGO T5 E-Paper S3 Pro
ESP32 S3LILYGO T5 E-Paper S3 Pro is an ESP32-S3 board with a 4.7-inch 16-greyscale e-paper display, SX1262 LoRa, touch input, RTC, BQ25896/BQ27220 battery management, 16MB flash, 8MB PSRAM, and optional GPS.
LILYGO T-Display P4
ESP32 P4High-performance ESP32-P4 development board with dual-core 360MHz RISC-V, 4.1" AMOLED or 4.05" TFT touchscreen, 2MP camera, SX1262 LoRa, GPS, 9-axis IMU, and ESP32-C6 for Wi-Fi 6 and Bluetooth 5.
LILYGO T-Connect Pro
Dev BoardESP32-S3 three-board stack with SX1262 LoRa, CAN, RS485, RS232, Ethernet (W5500), relay, capacitive touch LCD, and DC input — a versatile industrial IoT gateway with long-range wireless.
LILYGO ESP32-S2 WOOR
ESP32 S2Compact ESP32-S2-WROOM module-based development board with 4MB Flash, 320KB SRAM, native USB OTG, WiFi 802.11 b/g/n, onboard LiPo charging, and BOOT/RESET buttons for USB HID and IoT prototyping.
LILYGO T-Track
ESP32 S3ESP32-S3R8 development board with a 1.1-inch JD9613 AMOLED display (126×294), onboard trackball, 16MB flash, 8MB PSRAM, WiFi, and BLE 5 — a compact touchless navigation dev kit for creative UI and int
LILYGO T7 Mini32 V1.5
ESP32Updated ESP32 Mini32 development board with 8MB PSRAM, 4/16MB Flash options, dual-core 240MHz, CH9102 USB-serial, WiFi, BLE 4.2, and 1.25mm JST LiPo connector in a 40×31mm breadboard-friendly footprin
LILYGO T-Display K230
K230AI-capable development board powered by KENDRYTE K230 dual-core 64-bit RISC-V SoC running at 1.6GHz with KPU neural network accelerator, 4.1" AMOLED display, and LoRa connectivity in multiple frequenc
LILYGO T-2CAN
Dev BoardLILYGO T-2CAN is an ESP32-S3 development board featuring dual CAN bus interfaces via two TWAI controllers, Wi-Fi, Bluetooth 5 LE, and wide DC input range for automotive and industrial applications.
LILYGO T-BHI260AP
Sensor ModuleCompact breakout board for the Bosch BHI260AP AI-powered IMU, featuring a 6-axis accelerometer and gyroscope with an onboard programmable AI neural network co-processor for motion pattern recognition
LILYGO ESP32 OLED V3.0
ESP32ESP32 development board with integrated 0.96-inch SSD1306 OLED display, 4MB Flash, 520KB SRAM, WiFi, Bluetooth dual-mode, USB-C, and onboard LiPo battery charging for compact IoT display projects.
LILYGO T-Vending
ESP32 S3ESP32-S3-WROOM-1 development board with MAX13487E RS-485 transceiver, T-PCIE SIM expansion slot, Grove connector, WiFi, and BLE — designed for vending machine control and industrial RS-485 communicati
LILYGO T-ICM-20948
Sensor ModuleBreakout module for the InvenSense ICM-20948 9-axis MEMS IMU, combining a 3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer with an onboard Digital Motion Processor for real-time motion
LILYGO TO-ESP8266 OLED SH1106
ESP8266ESP8266 development board with 1.3-inch SH1106 OLED display, 8 digital I/O pins, CH9102 USB-serial, 3.3V operation, WiFi 802.11 b/g/n, and JST 1.25mm LiPo connector — supports ESPHome and Tasmota firm
Open AIR Mini
IoT ControllerOpen-source ESP32-based ventilation controller for Ducobox Silent/Focus and Orcon MVS-15xx systems with optional CO2, humidity, VOC, and NOx sensors, fully compatible with ESPHome and Home Assistant.
LILYGO T-PoE Pro
ESP32ESP32-WROVER-E development board with LAN8720 Ethernet, IEEE 802.3 af/at Power over Ethernet (5V@4A, 44–57V input), 16MB flash, 8MB PSRAM, WiFi, BLE 4.2, and expandable LCD interface for wired IoT gat
LILYGO T4 S3
ESP32 S3LILYGO T4 S3 is an ESP32-S3 development board with a 2.41-inch AMOLED touchscreen (450x600), 16MB flash, 8MB PSRAM, microSD slot, Wi-Fi, and Bluetooth 5 LE.
LILYGO Helium T-Beam
Dev BoardESP32 + SX1276 LoRa T-Beam variant optimized for the Helium IoT network — with NEO-6M GPS, AXP2101 PMU, and 18650 battery support for portable LoRaWAN network mapping and sensor nodes.
LILYGO ESP32-S2
ESP32 S2Pure ESP32-S2 development board with 4MB Flash, 8MB SRAM, native USB, WiFi 802.11 b/g/n, onboard LiPo charging, and multiple control buttons — a single-core Xtensa LX7 board for USB-HID and IoT applic
LILYGO T-Beam BPF
Dev BoardLILYGO T-Beam BPF is an ESP32-S3 LoRa development board variant featuring an onboard Band Pass Filter for improved RF selectivity, designed for the 144–148 MHz amateur radio band with GPS and OLED dis
LILYGO Module17 Revision 0.1E
Dev BoardSTM32-based M17 digital amateur radio modem board with DE-9 connector — implements the open-source M17 protocol for digital voice and data over amateur radio, compatible with OpenRTX firmware.
LILYGO T-ETH Elite
ESP32 S3High-end ESP32-S3 Ethernet development board with W5500 SPI Ethernet, Power-over-Ethernet support, 16MB flash, 8MB PSRAM, and modular LoRa/LTE expansion shield system.
LILYGO T-Beam 1W
Dev BoardLILYGO T-Beam 1W is an ESP32-S3 LoRa development board featuring a 1-watt LoRa power amplifier for significantly extended transmission range, with GPS support, AXP2101 PMU, and 18650 battery compatibi
LILYGO T3 S3 V1.3
ESP32 S3ESP32-S3 LoRa development board (hardware revision V1.3) with 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, WiFi, BLE 5.0, and support for SX1262/SX1276/SX1280/LR1121 radio modules at 433/868/915MHz a
LILYGO T-Dongle C5
Dev BoardCompact USB dongle with ESP32-C5 featuring dual-band WiFi 6 (2.4/5GHz), Bluetooth 5, 802.15.4, 0.96-inch LCD, TF card slot, and 16MB flash — the first LILYGO dongle with WiFi 6 support.
LILYGO T3 TCXO
ESP32ESP32 LoRa development board with a Temperature Compensated Crystal Oscillator (TCXO) for enhanced LoRa frequency stability, 0.96-inch SSD1306 OLED display, 4MB Flash, WiFi, BLE 4.2, TF card slot, and
LILYGO T-Relay 5V 8-Channel
ESP32ESP32-WROVER-E development board with 8 optocoupler-isolated 5V relay channels (HRS4H-S-DC5V), Wi-Fi, BLE 4.2, 8MB PSRAM, and support for DC 12–24V power input for industrial automation.
LILYGO T3 S3 LR1121
Dev BoardLILYGO T3 S3 LR1121 is an ESP32-S3 development board with a Semtech LR1121 multi-band transceiver supporting sub-GHz (830–940 MHz) and 2.4 GHz LoRa, plus a 0.96" OLED display and microSD card slot.
LILYGO T3 STM32
STM32STM32WL55CCU6 LoRa development board with dual Cortex-M4 + M0+ cores, built-in LoRa/FSK/MSK radio at 433/868/915MHz, 0.96-inch SSD1315 OLED, 256KB Flash, 64KB RAM, and open-source Arduino/STM32CubeIDE
LILYGO T-HaLow P4
Dev BoardESP32-P4 high-performance board with ESP32-C6 WiFi HaLow (802.11ah), 16MB flash, 8MB PSRAM, H.264 1080P video processing, MIPI-CSI/DSI, and BLE 5 — designed for long-range sub-GHz WiFi IoT application
LILYGO T3-S3 MVSR
ESP32 S3ESP32-S3 LoRa voice kit with MAX98357A speaker, MSM261S4030HOR microphone, vibration motor, RTC, 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, and SX1262/SX1276/SX1280 radio options — designed for LoR
LILYGO T-Touch Bar
ESP32 S3ESP32-S3 touch-sensitive bar display board with 8MB PSRAM, 16MB Flash, Wi-Fi, and Bluetooth 5, available in LED and AMOLED display variants for building custom HMI panels, smart home controls, and int
LILYGO T-Zigbee ESP32-C3 TLSR8258
Dev BoardDual-MCU Zigbee development board combining ESP32-C3 (WiFi/BLE) and Telink TLSR8258 (Zigbee/BLE Mesh) — both run simultaneously for bridging Zigbee sensor networks to WiFi/cloud platforms.
LILYGO T-SIM7600
ESP32ESP32 development board with SIM7600 LTE Cat-4 modem (150Mbps DL), GPS, 18650 battery holder with solar charging interface, and dual USB-C ports for high-speed cellular IoT applications.
pic0rick Pico Ultrasound Pulse-Echo System
Dev BoardOSHWA-certified open-source ultrasound development kit built around the Raspberry Pi Pico (RP2040). Features a 60 Msps 10-bit ADC, AD8331 time-gain amplifier, and three-level bipolar pulser for NDT an
LILYGO T-Call V1.4
ESP32ESP32 development board with SIM800L 2G GSM/GPRS cellular modem, Wi-Fi, Bluetooth 4.2, USB-C charging, and Li-Po battery connector for IoT devices requiring SMS and GPRS data connectivity.
LILYGO T-RS S3
ESP32 S3ESP32-S3 industrial communication board with isolated RS-232 and RS-485 modules (3000V isolation), 7–24V DC input via DB9 connector, Wi-Fi, and Bluetooth 5 LE for Modbus and industrial serial networki
LILYGO T-Encoder ESP32
ESP32Compact ESP32-PICO-V3-02 board with rotary encoder, WS2812 RGB LED ring, Wi-Fi, BLE 4.2, 8MB flash, and 2MB PSRAM. Ideal for knob-based UI controllers and volume/parameter controls.
LILYGO T-Bao
ESP32Dual-MCU development board combining ESP32 and KENDRYTE K210 RISC-V AI processor with OV2640 camera, 1.54" IPS touchscreen, I2S audio amplifier, motor driver, 6-axis IMU, and Wi-Fi for edge AI and rob
LILYGO T5 4.7-inch E-Paper V2.3
ESP32 S3ESP32-S3 e-paper development board with 4.7-inch 540×960 16-grayscale display (EDO47TC1), Wi-Fi, Bluetooth 5.0, PCF8563 RTC, 16MB flash, 8MB PSRAM, and optional capacitive touch overlay.
madflight FC3v2 RP2350B Flight Controller
Flight ControllerOpen-source flight controller board with RP2350B MCU, 10-DOF sensor suite (gyro, accelerometer, barometer, magnetometer), INA226 battery monitor, microSD with 4-bit SDIO, and DC-DC converter. 50.7x41.
LILYGO T-Dongle ESP32-S2
ESP32 S2USB-A dongle form factor board with ESP32-S2, 1.14-inch ST7789V IPS LCD, Wi-Fi, OTG, TF card slot, and Grove connector. Predecessor to the T-Dongle S3 series, ideal for portable USB IoT devices.
LILYGO T-Embed CC1101 Plus
ESP32 S3Enhanced ESP32-S3 handheld with CC1101 sub-GHz radio, nRF24L01 2.4GHz radio, 1.9" IPS LCD, IR transceiver, 16MB flash, 8MB SRAM. Upgraded version of T-Embed CC1101 with added 2.4GHz wireless module.
Waveshare LuckFox Nova
sbcAn ultra-compact Linux SBC powered by Rockchip RK3308B with quad-core Cortex-A35 at 1.3GHz, 512MB DDR3, 8GB eMMC, 100M Ethernet, optional Wi-Fi 6 and PoE, and an integrated audio codec with 8-channel
Makerfabs ESP32 UWB Pro with Display
Dev BoardESP32-WROVER development board with Decawave DWM1000 UWB module for centimeter-accurate indoor positioning and ranging, featuring a 1.3\" OLED display and LiPo battery charging.
Waveshare ESP32-S3 Touch LCD 7
Dev BoardESP32-S3 dev board with 7" capacitive touch IPS display (800x480), CAN/RS485 interfaces, and battery support. Built for HMI panels, industrial control, and IoT dashboards.
Denky D4
IoT Sensor BoardOpen-source ESP32 Teleinfo reader board for French Linky energy meters. Pre-flashed with Tasmota, features USB-C, WiFi, QWIIC I2C port, and RGB LED. Reads both Standard and Historique TIC formats.
TimeHAT I226 NIC with PPS In/Out for RPi5
Raspberry Pi HatOpen-source Raspberry Pi 5 PCIe HAT with Intel I226 2.5G Ethernet NIC, dual SMA connectors for 1PPS input/output, built-in TCXO, and M.2 slot for GNSS modules. Ideal for PTP grandmaster clocks.
ESP32 WiFi Fancontroller
Fan ControllerESP32-S2-based WiFi fan controller with 4 independent PWM outputs, integrated HDC1080 temperature and humidity sensor, Qwiic expansion, and native Home Assistant integration via ESPHome.
M5Stack CoreS3
Dev BoardThird-generation M5Stack Core with ESP32-S3 dual-core 240MHz, 2.0\" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, RTC, 5
M5Stack Atom Lite
Dev BoardUltra-compact ESP32-PICO-D4 development board (24x24mm) with RGB LED, programmable button, IR transmitter, Grove port, and 6 GPIO pins. Supports Arduino, ESP-IDF, UIFlow, and MicroPython.
M5StickC Plus 2
Dev BoardCompact ESP32-PICO-V3-02 wearable dev board with 1.14" TFT LCD (135x240), 6-axis IMU (MPU6886), IR transmitter, microphone, buzzer, 200mAh battery, Wi-Fi and Bluetooth in a 48x24x13.5mm form factor.
M5Stack Core2
Dev BoardESP32-based IoT dev kit with 2.0" IPS capacitive touch display, 16MB flash, 8MB PSRAM, built-in mic, speaker, IMU, vibration motor, and 390mAh battery in a compact stackable enclosure.
M5Stack Cardputer-Adv
Dev BoardCredit-card-sized ESP32-S3 handheld computer with 56-key mechanical keyboard, 1.14" IPS display, BMI270 IMU, ES8311 audio codec, 1W speaker, MEMS microphone, IR transmitter, 1750mAh battery, Grove I2C
M5Stack AtomS3
Dev BoardUltra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD (128x128), 6-axis IMU, 8MB flash, Wi-Fi, BLE 5.0, USB-C, and Grove port. Ideal for IoT prototyping and embedded UI projects.
Heltec WiFi LoRa 32 V4
Dev BoardESP32-S3 based LoRa development board with built-in 0.96" OLED display, SX1262 LoRa transceiver, WiFi, BLE 5.0, USB-C, and LiPo battery charging. One of the most popular boards for Meshtastic.
M5Stack Dial
Dev BoardESP32-S3 smart rotary knob with 1.28" round GC9A01 touch display (240x240), rotary encoder, RFID reader (WS1850S), RTC (BM8563), buzzer, and 2 Grove ports for IoT control interfaces.
ESP32-CAM
Dev BoardESP32-based camera dev board with OV2640 2MP sensor, microSD slot, WiFi, Bluetooth, 4MB flash, and 520KB SRAM. Ideal for DIY security cameras, timelapse, and computer vision projects.
Holybro Pixhawk 6C
Flight ControllerOpen-source flight controller based on the Pixhawk FMUv6C standard. Features STM32H743 processor, dual redundant IMUs, barometer, and magnetometer. Runs ArduPilot or PX4 autopilot firmware.
WT32-ETH01
Dev BoardESP32 module with built-in Ethernet (LAN8720A PHY), WiFi, and Bluetooth. Designed for wired IoT applications, gateways, and industrial automation where reliable network connectivity is essential.
SenseCAP Indicator D1
Dev BoardDual-MCU IoT development platform featuring ESP32-S3 and RP2040 processors with a 4-inch capacitive touchscreen, WiFi, BLE, optional LoRa, and multiple Grove sensor connectors for IoT prototyping.
M5Stack Atom Echo
Dev BoardUltra-compact ESP32-PICO smart speaker dev kit (24x24mm) with built-in microphone, speaker, RGB LED, button, and Grove port. Ideal for voice assistant and audio streaming projects.
Seeed XIAO ESP32S3 Plus
Dev BoardUltra-compact ESP32-S3 development board with OV2640 camera, digital microphone, 8MB PSRAM, 8MB flash, WiFi 802.11 b/g/n, BLE 5.0, extended GPIO, and battery charging — ideal for AI and IoT edge proje
M5Stack NanoC6
Dev BoardUltra-compact ESP32-C6 dev board by M5Stack with WiFi 6, BLE 5.0, Zigbee 3.0, and Thread/Matter support. RISC-V single-core at 160MHz, USB-C, RGB LED, and button in a tiny form factor.
M5Stack Atom Matrix
Dev BoardUltra-compact ESP32-PICO dev board (24x24mm) with 5x5 RGB LED matrix, 6-axis IMU (MPU6886), IR LED, programmable button, and Grove port. Perfect for LED displays and motion sensing.
M5Stack AtomS3 Lite
Dev BoardUltra-compact ESP32-S3 dev board (24x24mm) by M5Stack without display. Features WiFi, BLE 5.0, 8MB flash, Grove port, RGB LED, button, and USB-C in a tiny enclosure for IoT and embedded projects.
DFRobot FireBeetle 2 ESP32-S3 AIoT Camera
Dev BoardESP32-S3 development board with integrated OV2640 camera, 16MB flash, 8MB PSRAM, WiFi and BLE connectivity. Designed for AIoT applications, computer vision, and edge AI projects.
Heltec MeshSolar
Dev BoardSolar-powered nRF52840 + SX1262 LoRa dev board with integrated BMS supporting 1-4 cell lithium batteries, MPPT solar charging, and USB PD3.0. Designed for Meshtastic solar nodes.
Louder Raspberry HAT Plus
Raspberry Pi HatOpen-source Raspberry Pi audio HAT featuring TAS5825M Class-D amplifier with integrated DSP, delivering 32W per channel at 8 ohms. Includes 15-band parametric EQ, FIR filtering, DRC, IR input, and onb
WT32-SC01 Plus
Dev BoardESP32-S3 development board with a 3.5" capacitive touch IPS LCD (480x320), 16MB flash, and 8MB PSRAM. Popular for building custom HMI/UI projects with LVGL, smart home panels, and IoT dashboards.
Sonoff Zigbee 3.0 USB Dongle Plus E
Usb DongleEFR32MG21-based Zigbee 3.0 USB coordinator dongle for Home Assistant and Zigbee2MQTT. A popular, reliable choice for building smart home Zigbee networks.
Heltec MeshTower
Dev BoardHigh-power Meshtastic relay/repeater kit with nRF52840 + SX1262 LoRa, 18V/10W solar panel, 3x2800mAh battery pack, IP66 aluminum enclosure, and 5.5dBi fiberglass antenna.
Prokyber AI-on-the-Edge-Cam
Dev BoardOpen-source ESP32-S3 camera board with PoE, microSD, and Stemma QT designed for AI-powered utility meter reading using the AI-on-the-edge-device firmware with TensorFlow Lite inference.
M5Stack Atom Echo S3R
Dev BoardESP32-S3 smart speaker dev kit with ES7210 audio codec, NS4168 amplifier, dual MEMS microphones, and RGB LED. Designed for Home Assistant voice assistant, ESPHome, and audio streaming projects.
Waveshare ESP32-S3 Touch LCD 3.49
Dev BoardESP32-S3 dev board with 3.49" capacitive touch IPS display, dual microphone array, 6-axis IMU, RTC, and battery support. Ideal for wearable UIs and compact IoT dashboards.
ESP32-S3 Nano
Dev BoardCompact ESP32-S3 dev board by Waveshare in Arduino Nano form factor. Features dual-core 240MHz LX7, 16MB flash, 8MB PSRAM, WiFi, BLE 5.0, and USB-C. Drop-in ESP32-S3 upgrade for Nano-sized projects.
Sonoff BasicR2
Smart SwitchWiFi smart switch based on ESP8285, widely used in the open-source home automation community. Easily flashable with Tasmota or ESPHome for local-only smart home control without cloud dependency.
iCESugar-Pro FPGA Development Board
FPGAOpen-source Lattice ECP5 FPGA dev board with 24K LUTs, 32MB SDRAM, 32MB SPI flash, 106 GPIO pins in DDR SODIMM form factor. Supports fully open-source toolchain (Yosys + Nextpnr) and RISC-V Linux.
HestiaPi ONE (Silent)
Smart ThermostatOpen-source smart thermostat based on Raspberry Pi Zero W with 3.5\" touchscreen, BME280 sensor, and silent solid-state relays. Fully local control with no cloud dependency, MQTT support, and Home Ass
duckyPad Pro
macropad20-key open-source mechanical macropad with duckyScript engine, ESP32-S3, 1.5\" OLED, Bluetooth 5.0, hot-swap switches, dual rotary encoders, and microSD — a powerful Stream Deck alternative.
FaikOut WiFi Aircon Controller
IoT ControllerOpen-source ESP32-S3 WiFi controller for Daikin air conditioners with local-only control via MQTT and Home Assistant. Replaces cloud-dependent Daikin WiFi modules with privacy-first, no-internet-requi
UPduino v3.1
FPGAA low-cost, fully open source FPGA development board built on the Lattice ICE40UP5K with 5.3K LUTs, on-board FTDI FT232H USB programmer, 4MB qSPI flash, and 39 GPIO pins on PMOD-compatible headers.
BlueMicro PyKey60
Keyboard PcbOpen-source 60% mechanical keyboard PCB with RP2040 MCU, per-key RGB NeoPixel LEDs, Kailh hot-swap sockets, onboard buzzer, and USB-C. Runs KMK and CircuitPython firmware.
CUBEEK CubeSat Educational Kit
Cubesat KitOpen-source 1U CubeSat educational kit powered by Arduino Pro Mini with LoRa communication, multi-sensor payload (IMU, barometer, GPS, temperature), solar-powered EPS, and ground station dashboard for
ESP32-DIV V2.0
Security ToolOpen-source multi-band wireless development toolkit with ESP32-U, 2.8" ILI9341 TFT display, 5 antennas, and SD card slot covering WiFi, BLE, 2.4GHz, and Sub-GHz frequency bands for security research a
Waveshare RoArm-M1
Robotic ArmESP32-based 5-DOF desktop robotic arm with high-torque serial bus servos, WiFi/Bluetooth control, motion recording, inverse kinematics, and ROS 2 support. Carbon fiber and aluminum construction.
Raspberry Pi Pico W
Dev BoardWireless microcontroller board featuring the RP2040 dual-core Cortex-M0+ processor with built-in WiFi 4 and Bluetooth 5.2 (BLE). Supports MicroPython, CircuitPython, and C/C++ development.
Waveshare RP2040-Zero
Dev BoardUltra-compact RP2040 microcontroller board in a tiny form factor. Features dual-core Cortex-M0+ at 133 MHz, USB-C, onboard WS2812 RGB LED, and castellated pads. Raspberry Pi Pico compatible.
Micro Journal Rev.3: Nadia
Keyboard PcbA 48-key ortholinear mechanical keyboard designed as a distraction-free writing companion for phones and tablets, powered by RP2040 with QMK/Vial firmware and dual rotary encoders.
Waveshare RoArm-M2-S
Robotic ArmESP32-based 4-DOF robotic arm with 360-degree base rotation, 500g payload at 300mm reach, dual-drive shoulder joint, 9-axis IMU, and ROS 2 + LeRobot compatibility. Under 850g total weight.
LOLIN D1 Mini V3
Dev BoardCompact WiFi development board based on the ESP8266-12F module. Features 4 MB flash, 11 digital I/O pins, Micro-USB, and a rich shield ecosystem. One of the most popular boards for IoT projects.
Waveshare RoArm-M3
Robotic ArmESP32-based 5+1 DOF robotic arm with 1kg payload, 360-degree base, dual-drive shoulder, 7 servos, 9-axis IMU, TF card slot, and ROS 2 + LeRobot support. Carbon fiber and aluminum build.
Blue Pill STM32F103C8T6
Dev BoardPopular low-cost development board based on the STM32F103C8T6 ARM Cortex-M3 microcontroller running at 72 MHz. Features 64 KB flash, 20 KB SRAM, and extensive peripheral support for embedded developme
DFRobot Maqueen Plus V3
robotAdvanced micro:bit STEM robot with 8x8 matrix laser ranging, 5 line-tracking sensors with intersection recognition, magnetic encoders, PID control, and 6 RGB LEDs. Programmable via MakeCode and MicroP
GY-521 MPU-6050 6-Axis IMU Module
Sensor Module6-axis inertial measurement unit combining a 3-axis accelerometer (±2/4/8/16g) and 3-axis gyroscope (±250-2000°/s) with onboard DMP. I2C interface, 3.3V/5V.
HuskyLens AI Camera
Ai CameraAI-powered vision sensor with built-in Kendryte K210 processor. Supports face recognition, object tracking, object recognition, line following, color recognition, and tag recognition via I2C or UART.
ACEBOTT QD001 Smart Robot Car
robotESP32-powered 4WD mecanum wheel robot car kit with ultrasonic, IR, and line-tracking sensors. Programmable via Arduino, ACECode, and Python. Expandable with camera, AI, tank, robot arm, and GPS packs.
Raspberry Pi 5
sbcThe latest Raspberry Pi single-board computer featuring a BCM2712 quad-core Cortex-A76 processor at 2.4GHz, PCIe 2.0, dual 4K HDMI output, USB 3.0, and available in 2GB, 4GB, 8GB, and 16GB RAM configu
OV2640 Camera Module
Camera Module2-megapixel camera module with SCCB/I2C interface, commonly used with ESP32-CAM and other microcontroller boards for image capture, video streaming, and computer vision projects.
Waveshare GPM280
Game ConsoleA portable retro gaming console based on Raspberry Pi Compute Module 3+ Lite with a 2.8-inch IPS display (640x480), 1500mAh battery, Wi-Fi ROM updates, and a compact 136.4x67.5mm form factor.
Waveshare LuckFox Lyra Pi
sbcA compact Linux development board based on the Rockchip RK3506 with triple-core Cortex-A7 + Cortex-M0, 512MB DDR3L, dual Ethernet with PoE, optional Wi-Fi 6 and 4G LTE, and a 40-pin GPIO header.
DFRobot Maixduino AI Development Kit
Dev BoardRISC-V AI development board combining the Kendryte K210 AI processor with ESP32 for WiFi/BT connectivity. Includes camera and microphone for computer vision and voice recognition applications.
Sonoff ZBMini
Smart SwitchZigbee 3.0 two-way smart switch in a tiny form factor that fits behind existing wall switches. Supports external switch input and works with Home Assistant, SmartThings, and other Zigbee hubs.
Home Assistant Connect ZWA-2
Usb DongleZ-Wave 700 series USB stick for Home Assistant, based on Silicon Labs EFR32ZG23. Plug-and-play Z-Wave coordinator with long range support, designed by Nabu Casa for seamless Home Assistant integration
Seeed XIAO 2-Channel WiFi AC Relay
Relay ModuleESP32-C6 based 2-channel AC relay module with WiFi 6, Zigbee 3.0, and Thread support. Compact relay board compatible with Arduino and ESPHome for smart home AC switching up to 10A per channel.
Sonoff SNZB-01P
Smart ButtonZigbee 3.0 wireless button and scene switch with single, double, and long press actions. Battery-powered with CR2477 lasting up to 5 years. Works with Home Assistant, Zigbee2MQTT, and eWeLink.
RFID RC522 Kit
moduleNXP MFRC522-based 13.56MHz RFID reader/writer kit with SPI interface, including reader module, MIFARE 1K card, and key fob. Ideal for access control and identification projects.
M5Stack Single Live Wire WiFi Smart Switch
Dev BoardESP32-C6 based WiFi smart switch for single live wire AC power control. Supports WiFi 6 and Zigbee 3.0, fits standard wall boxes for home automation.
ADS1115 16-Bit ADC Module
Sensor Module16-bit 4-channel analog-to-digital converter module with programmable gain amplifier (PGA, up to 16x). I2C interface, 860 SPS max. Ideal for precision analog measurements.
ESP8266 ESP-01S WiFi Module
ESP8266Compact ESP8266-based WiFi dev board with 1MB flash, 2 GPIO pins, and 802.11 b/g/n. Runs Arduino, MicroPython, ESPHome, and Tasmota firmware for smart home and IoT projects.
M5Stack Air Quality Kit v1.1
Dev BoardESP32-S3 based air quality monitor with SEN55 particulate/VOC sensor, SCD40 CO2 sensor, 1.54" e-ink display, 600mAh battery, and Grove connector.
LoRa A39-T230A30D1a SX1262 Module
moduleLong-range LoRa transceiver module with Semtech SX1262, UART interface, 1W output power, and up to 16km range at 210-241MHz. Ideal for remote telemetry and agricultural IoT.
M5Stack ENV III Unit
Sensor ModuleI2C environmental sensor unit with SHT30 temperature/humidity and QMP6988 barometric pressure sensors. Grove connector, compatible with M5Stack ecosystem.
Flipper Zero
Multi ToolPortable open-source multi-tool for hardware exploration, combining Sub-GHz, NFC, RFID 125kHz, infrared, iButton, BLE, and GPIO in a pocket-sized device with a 1.4" monochrome LCD.
ChameleonUltra
Nfc Rfid ToolOpen-source NFC/RFID multi-tool built on the nRF52840 SoC. Reads, writes, cracks, and emulates 13.56MHz and 125kHz cards in a compact key-fob form factor with BLE 5.0 connectivity.
M5Stack UnitV2 AI Camera
Ai CameraLinux-based standalone AI camera with SigmaStar SSD202D dual-core Cortex-A7, GC4653 4MP sensor, 128MB RAM, WiFi, and USB-C. Runs Python and V-Training for edge AI.
nRF24L01 2.4GHz Wireless Module
moduleNordic nRF24L01+ 2.4GHz wireless transceiver module with SPI interface, 2Mbps data rate, 126 channels, and up to 100m range. Popular choice for Arduino and Raspberry Pi wireless sensor networks.
M5Stack GPS Module V2.1
moduleATGM336H-based GPS/GNSS module supporting GPS, BeiDou, Galileo, GLONASS with external active antenna, DIP switch for TX/RX config, and PPS output.
Waveshare DDSM115 Direct Drive Servo Motor
moduleAll-in-one 115 RPM direct drive servo hub motor with RS485 control, 4096-position encoder, and IP54 rating — designed for robotics, AGVs, and precision motion applications.
Waveshare DDSM315 Direct Drive Servo Motor
moduleHigh-speed 315 RPM direct drive servo motor with RS485 bus, 12-bit encoder, and IP54 waterproof rating — ideal for RC cars, mobile robots, and DIY robotics platforms.
Holybro Pixhawk 4
Flight ControllerOpen-source flight controller based on the Pixhawk FMUv5 standard. Features STM32F765 processor at 216MHz, triple redundant IMUs, barometer, and magnetometer. Runs ArduPilot or PX4 autopilot firmware.
Holybro M10 GPS
moduleu-blox M10 GPS module with IST8310 compass for Pixhawk flight controllers. Supports GPS, GLONASS, Galileo, and BeiDou constellations with onboard safety switch, buzzer, and LED indicator.
WiFi Devboard for Flipper Zero
ESP32 S2ESP32-S2-based WiFi development board for Flipper Zero enabling wireless firmware updates, Black Magic Probe debugging over USB and WiFi, and WiFi pentesting with PMKID capture and deauth capabilities
Flipper Zero Video Game Module
Expansion ModuleRP2040-powered expansion module for Flipper Zero with DVI-D video output, 6-axis IMU motion sensor, 14-pin GPIO breakout, and USB-C. Fully open-source firmware and schematics.
Bee Data Logger
Development BoardESP32-S3 based data logging board with DS3231 RTC, microSD card slot, dual STEMMA/Qwiic connectors, and LiPo charging. Achieves ~21µA deep sleep current. Open source hardware with Arduino and CircuitP
TinkerNav RTK GNSS Board
GNSS ReceiverOpen-source RTK GNSS board with SkyTraq PX1105R receiver and ESP32-S3 for centimeter-level positioning. Works as base station or rover with WiFi, Bluetooth LE, and optional LoRa connectivity.
UkieLab WiFi Weather Station 7.5"
consumerA smart WiFi-enabled weather station with a 7.5\" e-ink display showing current conditions, humidity, pressure, and 4-day forecasts via Apple Weather. Available in USB-powered or battery-powered versi
Oui-Spy
Security ToolESP32-S3 based multi-mode BLE detection and security research tool with integrated piezo buzzer, MMCX antenna connector, and seven swappable firmware modes for surveillance detection, drone tracking,
Makerfabs ESP32 UWB DW3000
Dev BoardESP32 + DW3000 UWB development board for centimeter-accurate indoor positioning and ranging. Supports UWB channels 5 and 9, FiRa compatible, Apple U1 interoperable. WiFi and Bluetooth for data relay.
Evil Crow RF V2
Security ToolOpen-source RF security research tool with ESP32, dual CC1101 sub-GHz transceivers (300-928MHz), and NRF24L01 2.4GHz module for penetration testing, signal analysis, and replay attacks.
Louder ESP32
Audio BoardESP32 audio development board with TAS5805M I2S Class-D amplifier delivering 2x23W stereo output, designed for multi-room audio, network streaming, and smart home integration.
Gnat LoRa+GNSS Asset Tracker
Asset TrackerUltra-small (20x20mm), ultra-low-power LoRa/LoRaWAN + concurrent GNSS asset tracker by Tlera Corp, built on the Murata CMWX1ZZABZ-078 module with STM32L082 MCU, SX1276 LoRa radio, u-blox MAX-M8Q GNSS,
Airlytix ES1
Sensor ModuleESPHome-native indoor air quality sensor with PM1.0/PM2.5/PM4/PM10, CO2, VOC, NOx, temperature, humidity, pressure, light, and sound monitoring. Designed for Home Assistant with full local control and
Grasshopper LoRaWAN Development Board
Dev BoardUltra-compact 18x45mm LoRaWAN development board from Tlera Corp featuring Murata's FCC-certified CMWX1ZZABZ-078 module with STM32L082 Cortex-M0+ MCU and SX1276 LoRa radio, drawing just 2 uA in stop mo
Elecrow ThinkNode M1
Meshtastic TransceiverCompact Meshtastic LoRa transceiver with nRF52840, SX1262, 1.54\" e-paper display, GPS, and 1200mAh battery for off-grid mesh communication.
HeishaMon Communication PCB
Communication PcbOpen-source ESP-based communication PCB for local monitoring and control of Panasonic Aquarea heat pumps via MQTT and HTTP, with Home Assistant integration and S0 energy metering support.
Armachat FLIP
Handheld MessengerPocket-sized open-source LoRa mesh messenger with ESP32-S3, RFM95 radio, 2.8" IPS display, and 36-key QWERTY keyboard. Runs Meshtastic and CircuitPython firmware for off-grid text communication.
TrackSenger
Dev BoardCompact Meshtastic-compatible LoRa communicator with push-button keyboard, built around the Heltec Wireless Tracker with ESP32-S3, SX1262 LoRa, GPS, and a 0.96" TFT display for off-grid mesh messaging
CircuitMess ClockStar 2.0
Diy KitDIY smartwatch kit powered by ESP32 with ST7735S display, 6-axis IMU, Bluetooth connectivity, and programmable via CircuitBlocks visual coding environment.
Shelly Plus 1
Relay ModuleESP32-C3 based WiFi/BLE smart relay module with 16A switching capacity, dry contact input, and compact DIN-rail or in-wall form factor. Flashable with Tasmota or ESPHome for local smart home control.
CircuitMess NASA Artemis Watch 2.0
smartwatchNASA-themed programmable smartwatch powered by ESP32-S3 with BLE 5.0, 6-axis IMU, ST7735S display, and activity tracking. Pre-assembled and ready to code.
CircuitMess Chatter 2.0
communicatorDIY encrypted LoRa communicator kit building a pair of devices for off-grid text messaging up to 2km range. Features ESP32, LLCC68 LoRa radio, and 160×128 TFT display.
LuckFox Pico
Linux SbcUltra-compact Linux SBC (51x21mm) based on Rockchip RV1103 with ARM Cortex-A7 @ 1.2GHz, RISC-V MCU co-processor, 0.5 TOPS NPU, ISP 3.2, 64MB DDR2, MIPI CSI camera, and 24 GPIO pins in a Pico form fact
CircuitMess ByteBoi 2.0
Game ConsoleDIY retro game console kit powered by ESP32 with TFT color display, speaker, microSD card slot, and RGB LED. Build it, play pre-loaded games, then code your own.
CircuitMess NASA Mars Perseverance Rover
Robotics KitNASA-themed DIY robotics kit with ESP32-S3, camera, dual DC motors, 3 servos, and WiFi/BLE. Build a programmable Mars Rover replica with robotic arm and live video feed.
Wemos D1 Mini (ESP8266)
Dev BoardCompact ESP8266-based WiFi development board with 4MB flash, 11 digital I/O pins, micro-USB, and a rich shield ecosystem. The most popular board for Tasmota and ESPHome DIY home automation projects.
Sonoff NSPanel
Smart SwitchESP32-based smart wall switch with 3.5-inch capacitive touchscreen, dual relay outputs, temperature sensor, and buzzer. Flashable with Tasmota for custom LVGL/Berry interfaces and Home Assistant integ
Sonoff MINIR4 Extreme
Relay ModuleUltra-compact ESP32-C3 WiFi smart switch module with 10A relay, detached switch mode, and the smallest form factor in its class. Fits any wall box. Flashable with Tasmota for local control.
Shelly Plus 2PM
Relay ModuleESP32-based dual-relay WiFi/BLE smart switch with per-channel power monitoring via ADE7953, cover/shutter control mode, and 10A per channel. Flashable with Tasmota for local roller blind and dual ligh
Sonoff POW Elite 16A
Relay ModuleESP32-based WiFi smart switch with high-accuracy power monitoring via CSE7766, 16A relay, LCD display, and DIN-rail mounting. Flashable with Tasmota for local energy tracking and home automation.
Adafruit ESP32-C6 Feather
Dev BoardOpen-source Feather-form-factor ESP32-C6 board with WiFi 6, BLE 5, Thread, Zigbee, STEMMA QT, NeoPixel, LiPo charging with MAX17048, and CircuitPython support — $14.95.
Sonoff Dual R3
Relay ModuleESP32-based dual-relay WiFi smart switch with per-channel power monitoring, roller shutter mode, and 2×10A outputs. Ideal for motorized blinds with Tasmota shutter calibration and position tracking.
Sonoff Zigbee Bridge Pro
gatewayESP32-based Zigbee-to-WiFi gateway with CC2652P coordinator chip supporting 128 Zigbee devices. Flashable with Tasmota for local Zigbee bridge operation with Home Assistant via MQTT.
Olimex ESP32-POE
Dev BoardOpen-source ESP32 development board with built-in Ethernet, Power-over-Ethernet support, micro-SD card slot, and LiPo battery connector. Ideal for wired Tasmota nodes and industrial IoT applications.
Waveshare ESP32-P4-Pico
Dev BoardCompact Pico-form-factor development board based on the ESP32-P4 RISC-V dual-core processor at 400MHz with 32MB PSRAM, 32MB flash, MIPI-DSI/CSI interfaces, onboard ES8311 audio codec with NS4150B ampl
Adafruit ItsyBitsy M4 Express
Dev BoardHigh-performance compact board with ATSAMD51 Cortex M4F at 120MHz, 192KB RAM, 512KB flash, 2MB SPI flash, dual 12-bit DAC/ADC, 18 PWM outputs, AES-256 crypto, and native USB. Measures 36mm × 18mm.
DFRobot EDGE201 DMX512 ESP32-S3 Lighting Controller
IoT ControllerESP32-S3-based DMX512 lighting programming controller with dual-core architecture, 8 optically isolated inputs, RS485, relay output, WiFi/Bluetooth, and DIN-rail mounting in an alloy steel enclosure.
DFRobot FireBeetle 2 M0
Dev BoardCompact, low-power ARM Cortex-M0+ development board with ATSAMD21G18 MCU, 16MB SPI flash, USB-C, WS2812 RGB LED, and FPC display connector, ideal for IoT and low-power applications.
DFRobot Beetle ESP32-C3
Coin-sized ESP32-C3 RISC-V IoT development board with WiFi, BLE 5.0, integrated LiPo charging, 13 GPIO pins, and USB-C in a 25x20.5mm form factor.
Pine64 PineTime
nRF52832Open-source smartwatch built on the Nordic nRF52832 SoC with 1.3-inch IPS touchscreen, heart rate sensor, accelerometer, and week-long battery life. Runs InfiniTime, Wasp-OS, or Zephyr firmware. Price
DFRobot FireBeetle 2 ESP32-C5 Development Kit
Dev BoardESP32-C5 RISC-V development kit with dual-band WiFi 6 (2.4/5GHz), BLE 5, Zigbee 3.0, Thread 1.3, and Matter support. Features solar charging, 21uA deep sleep, IO expansion board, and 18 digital I/O pi
makerdiary nRF52840-MDK USB Dongle
nRF52840Open-source multi-protocol wireless USB dongle based on the Nordic nRF52840 SoC. Supports BLE 5.4, Thread, Zigbee, 802.15.4, NFC, and USB 2.0 with UF2 drag-and-drop bootloader. Priced at $12.99.
nice!nano v2 Wireless Keyboard Controller
nRF52840Pro Micro drop-in replacement wireless keyboard controller built on the nRF52840 with BLE 5.0, onboard LiPo charger, mid-mount USB-C, and UF2 bootloader. The most popular controller for ZMK wireless s
DFRobot Beetle ESP32
Compact ESP32 dual-core development board with WiFi, Bluetooth 4.2, sewable I/O pads, and wearable-friendly 35x34mm form factor for IoT and e-textile projects.
BeagleConnect Freedom
CC1352P7Open-source wireless IoT board with TI CC1352P7 dual-band radio (sub-GHz + 2.4 GHz), BLE 5.0, two mikroBUS sockets for 1,000+ Click boards, and Zephyr RTOS. Designed for long-range wireless sensor net
Waveshare WAVE ROVER
Robot PlatformFlexible 4WD mobile robot chassis with all-metal body, ESP32 controller, 0.91\" OLED, 9-axis IMU, 3S UPS power system, and open-source firmware. Supports Raspberry Pi and Jetson Nano as host computers
DFRobot FireBeetle 2 ESP32-E
Dev BoardCompact ESP32-E IoT microcontroller with WiFi 802.11 b/g/n, Bluetooth 4.2, 18 digital I/O, 11 analog inputs, 7 touch pins, 2 DACs, onboard WS2812 RGB LED, GDI display interface, and lithium battery ch
DFRobot Beetle RP2040
Compact RP2040 dual-core ARM Cortex-M0+ development board with USB-C, 8 GPIO pins, and beginner-friendly immersion gold pads in a 27x20mm form factor.
LattePanda Mu N100
Compute ModuleCard-sized x86 compute module with Intel N100 quad-core (up to 3.4GHz), 8GB LPDDR5, 64GB eMMC, 9 PCIe 3.0 lanes, triple display output, and open-source KiCAD carrier board design for custom embedded s
Waveshare RP2040-GEEK
A compact USB-A development board and debugging tool built around the RP2040 dual-core Cortex-M0+ MCU, featuring a 1.14-inch IPS LCD, microSD card slot, and exposed SWD, UART, and I2C connectors for p
LuckFox Omni3576
sbcRockchip RK3576 octa-core edge computing SBC with 6 TOPS NPU, dual Gigabit Ethernet, WiFi 6, dual MIPI CSI camera inputs, HDMI 2.1 4K@120Hz output, and M.2 NVMe slot. Supports Debian, Ubuntu, Android
DFRobot FireBeetle 2 ESP32-P4 AI Development Kit
Dev BoardESP32-P4 dual-core RISC-V AI development kit with hardware H.264 encoding at 1080p@30fps, MIPI CSI/DSI camera and display interfaces, ESP32-C6 WiFi 6 coprocessor, 32MB PSRAM, 16MB flash, PDM microphon
DFRobot Beetle RP2350
Ultra-affordable RP2350 dual-architecture development board with switchable ARM Cortex-M33 / RISC-V cores, LiPo charging, 11 GPIO pins, and USB-C in a 25x20.5mm package.
LattePanda Mu N305
Compute ModuleCard-sized x86 compute module with Intel Core i3-N305 8-core (up to 3.8GHz), 16GB LPDDR5, 64GB eMMC, 9 PCIe 3.0 lanes, triple display output, and open-source KiCAD carrier board design.
Waveshare ESP32-C6-GEEK
Dev BoardCompact USB-A dongle development board with ESP32-C6 RISC-V MCU, 1.14\" IPS LCD, WiFi 6, BLE 5.0, Zigbee 3.0, Thread, and microSD slot for portable IoT projects.
Adafruit Feather M0 Basic Proto
Dev BoardFeather-format ATSAMD21 ARM Cortex-M0+ board at 48 MHz, 3.3V with 256KB flash, 32KB RAM, LiPo charging, native USB, 12-bit ADC/DAC, and RTC crystal — lightweight and CircuitPython-capable.
Waveshare RP2350B-Plus-W
Dev BoardCompact Pico-form-factor development board featuring the Raspberry Pi RP2350B dual-architecture MCU with WiFi and Bluetooth 5.2 via the Raspberry Pi Radio Module 2, 16MB flash, 26 GPIO pins, and USB-C
DFRobot FireBeetle 2 ESP32-P4 AI Vision Board
Dev BoardESP32-P4 dual-core RISC-V AI vision board at 360MHz with hardware H.264/JPEG encoding, MIPI CSI/DSI interfaces, ESP32-C6 WiFi 6 coprocessor, 32MB PSRAM, 16MB flash, PDM microphone, TF card slot, and 2
Waveshare UGV Rover
Robot PlatformOpen-source 6-wheel 4WD AI robot platform with dual-controller architecture (ESP32 + Raspberry Pi), computer vision, pan-tilt camera, ESP-NOW communication, and ROS2 support for robotics education and
D-Robotics RDK X3
AI-focused single board computer with 5 TOPS NPU, quad-core ARM Cortex-A53, 4GB LPDDR4, dual MIPI CSI cameras, and ROS2 support for robotics and edge AI.
D-Robotics RDK X5
High-performance AI SBC with 10 TOPS NPU, octa-core ARM Cortex-A55, 8GB LPDDR4, WiFi 6, 4x USB 3.0, dual MIPI CSI, CAN FD, and ROS2 support for advanced robotics.
DFRobot Romeo ESP32-S3
Robotics KitAll-in-one robotics development board with ESP32-S3 (16MB flash, 8MB PSRAM), four-channel 2.5A motor driver, OV2640 camera, WiFi, Bluetooth 5, microSD, and GDI display connector for building smart rob
Ai-Thinker Ra-09-DTU
DTUIntelligent wireless LoRaWAN DTU with isolated RS485 interface, powered by STM32WLE5CCU6 ARM Cortex-M4 MCU with integrated Sub-GHz radio. Wide 6-36V input for industrial deployment.
DFRobot FireBeetle 2 ESP32-S3 (N4)
Dev BoardESP32-S3 dual-core IoT microcontroller with AI acceleration, WiFi 802.11 b/g/n, BLE 5.0, 26 GPIO pins, 20 ADC channels, USB 2.0 OTG, GDI display interface, lithium battery charging, and stamp-hole PCB
LuckFox Pico WebBee
Dev BoardUltra-compact Rockchip RV1103 Linux micro development board in USB dongle form factor with 10/100Mbps Ethernet, 64MB DDR2, 128MB NAND flash, and ABS protective case. Ideal for lightweight web servers,
Adafruit Feather M0 Adalogger
Dev BoardFeather-format ATSAMD21 ARM Cortex-M0+ data logger at 48 MHz, 3.3V with microSD slot, 256KB flash, 32KB RAM, LiPo charging, native USB, and 12-bit ADC — 32-bit power for field data collection.
Waveshare RP2350-One
Dev BoardUltra-compact USB-A plug-and-play development board with the Raspberry Pi RP2350A dual-architecture MCU, 4MB flash, WS2812 RGB LED, castellated module design, and 29 GPIO pins in a tiny 18 x 25.5mm fo
DFRobot UNIHIKER K10
Dev BoardAll-in-one AI coding board for STEM education with ESP32-S3, 2.8-inch touchscreen, 2MP camera, microphone, speaker, environmental sensors, WiFi, Bluetooth 5, and pre-loaded AI models for vision, voice
Waveshare ESP32-H2-Zero
Dev BoardUltra-compact castellated ESP32-H2 development board with BLE 5.2, Zigbee 3.0, Thread 1.3, and Matter support. USB-C powered with WS2812 RGB LED, 15 GPIO pins, and 4MB flash in a tiny 23.5 x 15.2mm fo
Adafruit Feather M0 RFM96 LoRa Radio (433 MHz)
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with RFM96 LoRa radio at 433 MHz. Spread-spectrum modulation for long-range links, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.
DFRobot FireBeetle 328P BLE 4.1
Dev BoardLow-power Arduino-compatible board with ATmega328P and Dialog BLE 4.1 chip, featuring 14 digital I/O, 6 analog inputs, wireless OTA programming, 25uA deep sleep, onboard LiPo charging, and dual interr
Waveshare RP2040-PiZero
A Raspberry Pi Zero form-factor development board based on the RP2040 dual-core Cortex-M0+ MCU with 16MB flash, Mini HDMI (DVI) output via PIO bitbanging, USB-C, PIO-USB host port, microSD card slot,
LuckFox Pico Pi
Dev BoardRockchip RV1106 Linux development board with 40-pin RPi-compatible GPIO, 100M Ethernet, optional WiFi 6, 4G LTE M.2 slot, MIPI CSI camera, 4x USB-A host ports, 8GB eMMC, audio jack, and onboard microp
DFRobot FireBeetle ESP32
Dev BoardCompact ESP32 IoT microcontroller with dual-core Xtensa LX6 at 240MHz, WiFi 802.11 b/g/n, Bluetooth 4.2, 16MB flash, 520KB SRAM, 10 digital I/O, 5 analog inputs, onboard LiPo charging, 10uA deep sleep
Waveshare RaspRover
Robot PlatformOpen-source 4WD AI robot with dual-controller architecture (ESP32 + Raspberry Pi), 5MP 160-degree camera, pan-tilt module, audio system, computer vision via OpenCV/MediaPipe, and ROS2 support for AI r
Waveshare RP2350-PiZero
Dev BoardRaspberry Pi Zero-shaped development board with RP2350B MCU, 16MB flash, mini-HDMI DVI output, microSD card slot, PIO-USB port, lithium battery header, and 40-pin Raspberry Pi HAT-compatible GPIO head
Waveshare Cobra Flex
Robot PlatformAll-metal modular drive-by-wire 4WD robot chassis with ESP32-S3 controller, hub motors with built-in FOC control, CNC metal suspension, LIN bus communication, IP32 protection, and 12 kg payload capaci
DFRobot ESP32-S3 AI Camera
ESP32-S3 AI camera module with 2MP wide-angle night vision sensor, I2S speaker and microphone, ambient light sensor, WiFi/BLE 5.0, and edge AI inference support in a 42x42mm package.
DFRobot FireBeetle ESP8266
Dev BoardCompact ESP8266 WiFi IoT microcontroller with Tensilica L106 at 80/160MHz, 16MB flash, 50KB SRAM, 10 digital I/O, onboard LiPo charging, 46uA low-power mode, OTA updates, and Arduino/MicroPython suppo
LuckFox Pico 86 Panel
Smart PanelStandard 86-type wall-mount smart panel with 4-inch 720x720 IPS capacitive touch display, Rockchip RV1106 SoC, 2-channel relay with optocoupler isolation, RS485, 100M Ethernet, onboard speaker and mic
Waveshare CM5-DUAL-ETH-BASE
Raspberry Pi HatGigabit + 2.5G dual Ethernet base board for Raspberry Pi Compute Module 5 with M.2 NVMe slot, dual HDMI 4K output, dual MIPI interfaces, wide 7-36V input, EEPROM, and encryption chip for industrial Io
Waveshare RP2040-LoRa
A compact RP2040-based LoRa module with SX1262 transceiver, available in 410-525MHz (LF) and 850-930MHz (HF) variants, featuring 2MB flash, 20 GPIO pins, IPEX antenna connector, and castellated edge d
Waveshare RP2350-ETH-8DI-8RO
Industrial ControllerIndustrial DIN-rail RP2350B controller with 8-channel relay outputs (10A/250VAC), 8 optocoupler-isolated digital inputs, W5500 Ethernet (optional PoE), isolated RS485, RTC, microSD, and 7-36V wide-vol
Waveshare ESP32-S3-LR1121
Dev BoardCompact castellated ESP32-S3 development board with Semtech LR1121 multi-band LoRa transceiver supporting Sub-GHz and 2.4GHz bands, WiFi, BLE 5.0, and Meshtastic compatibility in a 41x21mm form factor
LuckFox PicoKVM
KVM DeviceCompact IP-KVM remote management tool based on RV1106G3, capturing 1080p@60fps HDMI with H.264 encoding at 80-200ms latency. Features 100M Ethernet, USB HID/UMS emulation, Wake-on-LAN, web terminal, a
LuckFox Pico Mini
Linux SbcTiny Linux SBC (28x21mm) based on Rockchip RV1103 with ARM Cortex-A7 @ 1.2GHz, RISC-V MCU, 0.5 TOPS NPU, 64MB DDR2, MIPI CSI camera, 17 GPIO pins, and castellated-hole design for direct soldering.
Waveshare ESP32-S3-CAM-OV5640
Dev BoardESP32-S3 AIoT camera board with 5MP OV5640 autofocus camera, dual-microphone array with noise cancellation, ES8311 audio codec, NS4150B speaker amplifier, battery charging, and display/camera expansio
LuckFox Pico Zero
Linux SbcFeature-rich Linux SBC based on Rockchip RV1106G3 with ARM Cortex-A7, 1.0 TOPS NPU, 256MB DDR3L, 8GB eMMC, WiFi 6, Bluetooth 5.2, 40-pin RPi-compatible GPIO, MIPI CSI 4-lane camera, and onboard microp
Waveshare ESP32-P4-WIFI6
Dev BoardPico-form-factor development board combining the ESP32-P4 RISC-V dual-core at 400MHz with an ESP32-C6 co-processor for WiFi 6 and Bluetooth 5 LE. Features 32MB PSRAM, 32MB flash, MIPI-DSI/CSI, onboard
LuckFox Pico Ultra
Linux SbcFull-featured Linux SBC based on Rockchip RV1106G3 with 1.0 TOPS NPU, 256MB DDR3L, 8GB eMMC, 100M Ethernet (RJ45), optional WiFi 6/BT 5.2, MIPI CSI camera, RGB LCD display output, speaker, and PoE hea
Waveshare ESP32-S3-AUDIO-Board
Dev BoardESP32-S3 AI smart speaker development board with dual-microphone array, ES8311 audio codec, 7 surround RGB LEDs, RTC, camera and LCD expansion interfaces, and LiPo battery support for voice assistant
LuckFox Pico Pro
Linux SbcLinux SBC based on Rockchip RV1106G2 with ARM Cortex-A7 @ 1.2GHz, 0.5 TOPS NPU, 128MB DDR3L, 256MB SPI NAND Flash, 100M Ethernet (RJ45), MIPI CSI camera, 26 GPIO pins, and RTC battery header in Pico f
LuckFox Core3506
moduleTiny 32x32mm Rockchip RK3506B core module with tri-core ARM Cortex-A7 + Cortex-M0, 512MB DDR3L, optional 8GB eMMC, dual 100M Ethernet RMII, MIPI DSI 2-lane, 4-ch ADC, CAN bus, and 120-pin castellated
Waveshare RP2350-CAN
Dev BoardPico-compatible development board with RP2350A MCU, onboard CAN V2.0B bus interface (XL2515 controller + SIT65HVD230DR transceiver), 4MB flash, 26 GPIO pins, castellated module design, and USB-C conne
Waveshare ESP32-P4-ETH
Dev BoardPico-form-factor development board with ESP32-P4 RISC-V dual-core at 400MHz, 100Mbps Ethernet via IP101 PHY, 32MB PSRAM, 32MB flash, MIPI-DSI/CSI interfaces, onboard ES8311 audio codec with amplifier,
TQ-Systems MBa8MPxL
Linux SbcFull-featured industrial carrier board for TQ-Systems TQMa8MPxL SOM with NXP i.MX 8M Plus, 4GB LPDDR4, 16GB eMMC, PCIe, SATA, dual Gigabit Ethernet, and 12V DC supply, designed for demanding industria
LuckFox Pico Plus
Linux SbcLinux SBC based on Rockchip RV1103 with ARM Cortex-A7 @ 1.2GHz, RISC-V MCU, 0.5 TOPS NPU, 64MB DDR2, 128MB NAND Flash, 10/100M Ethernet (RJ45), MIPI CSI camera, and 25 GPIO pins in a Pico form factor.
Waveshare ESP32-S3-RS485-CAN
Dev BoardIndustrial ESP32-S3 control board with isolated RS-485 and CAN bus interfaces, 7-36V wide voltage input, PCF85063 RTC, DIN rail enclosure, and WiFi/Bluetooth for industrial IoT and automation applicat
LuckFox Lyra
Linux SbcCompact Linux SBC based on Rockchip RK3506G2 with triple-core ARM Cortex-A7 @ 1.2GHz + Cortex-M0 MCU, 128MB DDR3L, MIPI DSI display output (up to 1280x800), 24 Rockchip Matrix IO pins, and built-in au
Waveshare ESP32-P4-WIFI6-DEV-KIT
Dev BoardFull-featured ESP32-P4 development board with WiFi 6 and Bluetooth 5 LE via ESP32-C6, 100Mbps Ethernet, PoE header, 3.5mm headphone jack, USB OTG HS switchable host/device, 16MB flash, 32MB PSRAM, MIP
LuckFox Lyra Plus
Linux SbcCompact Linux SBC based on Rockchip RK3506G2 with triple-core ARM Cortex-A7 @ 1.2GHz + Cortex-M0, 128MB DDR3L, 256MB NAND Flash, 100M Ethernet, MIPI DSI display output, 24 Rockchip Matrix IO pins, and
LuckFox Lyra Ultra
Linux SbcFeature-rich Linux SBC based on Rockchip RK3506B with triple-core ARM Cortex-A7 @ 1.2GHz + Cortex-M0, 512MB DDR3L, 8GB eMMC, 100M Ethernet, optional WiFi 6/BT 5.2, MIPI DSI display, PoE header, and 33
LuckFox Core1106
moduleCompact 30x30mm Rockchip RV1106 compute module with ARM Cortex-A7, up to 1 TOPS NPU, 5MP ISP, 256MB DDR3L, 8GB eMMC, optional WiFi 6 and BLE 5.2, dual MIPI CSI camera inputs, and 112 castellated holes
Waveshare ESP32-S3-POE-ETH-8DI-8DO
Dev BoardIndustrial ESP32-S3 controller with 8-channel optocoupler-isolated digital inputs (5-36V), 8-channel Darlington outputs (500mA each), PoE Ethernet (W5500), isolated RS-485 and CAN bus, RTC, and DIN ra
LuckFox Lyra Zero W
Linux SbcCompact Linux SBC based on Rockchip RK3506B with triple-core ARM Cortex-A7 @ 1.2GHz + Cortex-M0, 512MB DDR3L, 256MB NAND Flash, WiFi 6, Bluetooth 5.2, MIPI DSI display, 28 Matrix IO pins, and 40-pin R
Waveshare ESP32-P4-WIFI6-POE-ETH
Dev BoardESP32-P4 development board with WiFi 6 and Bluetooth 5 LE via ESP32-C6, 100Mbps PoE Ethernet via IP101GRI, IPEX external antenna, USB Type-A OTG HS, 32MB PSRAM, 16MB flash, MIPI-DSI/CSI, onboard audio
Waveshare RP2350-Matrix
Dev BoardCompact RP2350A development board with an 8x8 WS2812 addressable RGB LED matrix, QMI8658 6-axis IMU (accelerometer + gyroscope), 16MB flash, 25 GPIO pins, HSTX interface, and USB-C for interactive LED
Waveshare RP2040-BLE
A compact RP2040-based module with Bluetooth 5.1 dual-mode (BLE + Classic SPP) connectivity, 2MB flash, 14 GPIO pins, ceramic antenna, and castellated edge design for embedded Bluetooth applications.
LuckFox Core3576 Module
moduleRockchip RK3576 SO-DIMM compute module with octa-core A72+A53, 6 TOPS NPU, Mali G52 GPU, up to 8GB LPDDR4X, 64GB eMMC, triple display output (HDMI 2.1 + eDP + MIPI DSI), triple camera input, dual Giga
VisionFive2 Lite
sbcCompact RISC-V SBC with StarFive JH7110S quad-core 64-bit processor @ 1.25GHz, up to 8GB LPDDR4, onboard WiFi 6 and Bluetooth 5.4, Gigabit Ethernet, HDMI 2.0, M.2 NVMe slot, MIPI CSI camera, 40-pin GP
Arduino Nano Matter
Dev BoardUltra-compact Matter/Thread/BLE development board based on Silicon Labs MGM240S, bringing official Matter support to the beloved Arduino Nano form factor at 45×18mm.
Olimex ESP32-C6-EVB
Dev BoardOpen-source hardware evaluation board with ESP32-C6, 4 mains-rated relays, 4 opto-isolated inputs, and WiFi 6/Thread/Zigbee/Matter connectivity for home and industrial automation.
SparkFun Thing Plus Matter - MGM240P
Dev BoardFeather-compatible Matter/Thread/Zigbee/BLE dev board based on Silicon Labs MGM240P with Qwiic, LiPo charging, microSD, and +20dBm radio range.
Olimex ESP32-C6-DevKit-Lipo
Dev BoardBreadboard-friendly open-source ESP32-C6 dev board with WiFi 6, Thread, Zigbee, BLE 5, built-in LiPo charger, and dual USB-C — all for under €9.
Olimex ESP32-H2-DevKit-LiPo
Dev BoardUltra-affordable open-source ESP32-H2 dev board for Thread, Zigbee, and Matter — BLE 5, LiPo charging, Qwiic/Stemma, dual USB-C, for €5.95.
DFRobot FireBeetle 2 ESP32-C6
Dev BoardLow-cost ESP32-C6 IoT board with WiFi 6, BLE 5, Thread, Zigbee, Matter, solar panel charging with MPPT, and ultra-low 16µA deep sleep — for $5.90.
DFRobot Beetle ESP32-C6
Dev BoardCoin-sized (25×20.5mm) ESP32-C6 wearable dev board with WiFi 6, BLE 5, Thread, Zigbee, Matter, integrated LiPo charger, and 14µA deep sleep — for $4.90.
Seeed Studio XIAO ESP32C6
Dev BoardThumb-sized (21×17.8mm) Matter/Thread/Zigbee/WiFi 6/BLE 5.3 dev board with dual RISC-V cores, onboard antenna, 15µA deep sleep, and hardware security — for ~$5.
M5Stack NanoH2
Stamp ModuleUltra-compact ESP32-H2 dev module with Thread 1.4, Zigbee 3.0, Matter, and BLE 5 — featuring a Grove port, IR transmitter, and RGB LED in a stamp-sized 23.5×12mm form factor.
Espressif ESP Thread Border Router
Dev BoardOfficial Espressif dual-SoC development board combining ESP32-S3 (host) and ESP32-H2 (radio co-processor) to build Thread 1.3 border routers and Zigbee gateways with Matter support over WiFi.
Espressif ESP32-C6-DevKitC-1
Dev BoardOfficial Espressif development board for the ESP32-C6, combining WiFi 6, BLE 5, and IEEE 802.15.4 (Thread/Zigbee/Matter) on a RISC-V single-core SoC — ideal for Matter-native IoT and smart home develo
Khadas VIM2
Powerful single-board computer with the Amlogic S912 octa-core SoC, 3GB DDR4 RAM, dual-band Wi-Fi ac, Bluetooth 5.0, and Gigabit Ethernet — supported by Armbian.
ODROID N2+
The ODROID N2+ is a powerful single-board computer from Hardkernel featuring the Amlogic S922X hexa-core SoC, 4GB DDR4 RAM, and Gigabit Ethernet. It excels as a media center, home automation hub, or g
Inovato Quadra
$29 Allwinner H6 mini PC running Armbian with 2GB RAM, 16GB eMMC, HDMI 2.0, WiFi 4, USB 3.0, and a fanless aluminum enclosure — the most affordable ARM Linux computer with Armbian Platinum support.
Mekotronics R58-4X4
RK3588 Arm PC with 4×HDMI inputs (4K@60Hz each), 1×HDMI 2.1 output (8K@60Hz), WiFi 6, GbE, M.2 NVMe, 4G LTE support, and up to 16GB RAM — a dedicated multi-source HDMI capture and digital signage comp
Mekotronics R58-HD
Triple RK3588 multi-display SBC with 6 HDMI outputs for video walls and digital signage, running Armbian Linux.
Orange Pi 5
The Orange Pi 5 is a high-performance single-board computer powered by the Rockchip RK3588S octa-core SoC, offering up to 16GB LPDDR4X RAM with USB 3.0, PCIe M.2, and 4K video output — ideal for deman
Orange Pi 5 Plus
The Orange Pi 5 Plus is an expanded version of the Orange Pi 5, featuring the full Rockchip RK3588 SoC with up to 32GB LPDDR4X RAM, dual Gigabit Ethernet, Wi-Fi 6, an M.2 NVMe slot, and two HDMI ports
Orange Pi 4 LTS
The Orange Pi 4 LTS is a capable single-board computer based on the Rockchip RK3399 hexa-core SoC, featuring 4GB LPDDR4 RAM, 16GB eMMC, integrated Wi-Fi and Bluetooth, and Gigabit Ethernet — a solid l
Orange Pi One
The Orange Pi One is a compact and affordable single-board computer powered by the Allwinner H3 quad-core Cortex-A7 SoC with 512MB DDR3 RAM, offering 100Mbps Ethernet and a full Linux experience at an
Orange Pi PC 2
The Orange Pi PC 2 is a 64-bit single-board computer based on the Allwinner H5 quad-core Cortex-A53 SoC with 1GB DDR3 RAM and Gigabit Ethernet, offering a cost-effective ARM64 Linux platform for maker
Khadas VIM1
Compact single-board computer powered by the Amlogic S905X quad-core SoC with 2GB DDR4 RAM, Wi-Fi, Bluetooth, and Gigabit Ethernet — supported by Armbian.
Khadas VIM3
High-performance single-board computer with the Amlogic A311D hexa-core SoC, up to 4GB DDR4 RAM, 5 TOPS NPU for AI inference, Wi-Fi 5, and USB-C PD — supported by Armbian.
ODROID C4
The ODROID C4 is a capable single-board computer from Hardkernel powered by the Amlogic S905X3 quad-core Cortex-A55 SoC with 4GB DDR4 RAM. It offers USB 3.0, Gigabit Ethernet, and eMMC support at an a
Khadas VIM3L
Affordable single-board computer with the Amlogic S905D3 quad-core SoC, up to 4GB DDR4 RAM, Wi-Fi 5, Gigabit Ethernet, and USB-C PD power — supported by Armbian.
Khadas VIM1S
Compact single-board computer with the Amlogic S905Y4 quad-core SoC, 4GB LPDDR4, 32GB eMMC, Wi-Fi 5, Bluetooth 5.1, and 100Mbps Ethernet — supported by Armbian.
ODROID HC4
The ODROID HC4 is a NAS-focused single-board computer from Hardkernel with the Amlogic S905X3 SoC, 4GB DDR4 RAM, and two direct-connect SATA ports for dual-drive storage. It is purpose-built for home
ODROID M1
The ODROID M1 is a maker-focused single-board computer from Hardkernel powered by the Rockchip RK3568 quad-core SoC with up to 8GB LPDDR4 RAM and M.2 NVMe support. It combines industrial-grade feature
ODROID M2
The ODROID M2 is Hardkernel's high-performance SBC featuring the Rockchip RK3588S octa-core SoC with up to 16GB LPDDR4X RAM, 2.5GbE networking, and M.2 NVMe storage. It targets demanding workloads inc
ODROID C2
The ODROID C2 is a 64-bit single-board computer from Hardkernel featuring the Amlogic S905 quad-core Cortex-A53 SoC with 2GB DDR3 RAM and Gigabit Ethernet. It was one of the first affordable 64-bit AR
Radxa Rock 5B
Linux SbcHigh-performance Rockchip RK3588 SBC from Radxa with up to 32GB LPDDR4X, NVMe M.2, WiFi 6, 2.5GbE, and USB-C PD power — a flagship Linux board in the Raspberry Pi 4 form factor.
Radxa Rock 5 ITX
Linux SbcMini-ITX single-board computer powered by Rockchip RK3588 with 16GB LPDDR4X, dual NVMe slots, dual 2.5GbE, PCIe x4, ATX power, and WiFi 6 — a true desktop motherboard replacement.
Radxa Rock 4D
Linux SbcMid-range Rockchip RK3576 SBC from Radxa with up to 8GB LPDDR4X, NVMe M.2, WiFi 6, Gigabit Ethernet, and USB 3.0 — a capable Linux board in a compact footprint.
Radxa Rock 3A
Linux SbcAffordable Rockchip RK3568 quad-core SBC from Radxa with up to 8GB LPDDR4, eMMC, microSD, Gigabit Ethernet, USB 3.0, PCIe, and M.2 expansion — no built-in WiFi, powered via USB-C or 12V DC.
TQ-Systems MBa8MP-RAS314
Linux SbcIndustrial carrier board for TQ-Systems TQMa8MPxL SOM, featuring NXP i.MX 8M Plus with quad-core Cortex-A53 + Cortex-M7, up to 4GB LPDDR4, 16GB eMMC, Gigabit Ethernet, WiFi 5, USB 3.0, and 12V DC inpu
Radxa Zero 3W
Linux SbcCredit-card sized Rockchip RK3566 SBC with up to 4GB LPDDR4, eMMC, microSD, WiFi 5, Bluetooth 5.0, and USB-C OTG — a compact headless Linux board with no Ethernet port.
NanoPi R6S
FriendlyElec NanoPi R6S — compact RK3588S router SBC with triple Ethernet ports (2× 2.5GbE + 1× GbE), 4GB/8GB LPDDR4X RAM, and 32GB eMMC for high-performance network routing and edge computing.
MKS KLIPAD50
Linux SbcMKS/Makerbase 5-inch Klipper touchscreen panel based on Rockchip RK3328, with 800×480 IPS display, 1GB RAM, 8GB eMMC, WiFi, and USB-C power — purpose-built for 3D printer Klipper control interfaces.
M5Stack StamPLC
plcESP32-S3 industrial PLC controller with 1.14" IPS LCD, 4 relays, 8 opto-isolated inputs, RS-485, CAN bus, INA226 power monitor, RTC, buzzer, microSD, and DIN-rail mounting in a compact enclosure.
Radxa Rock S0
Linux SbcTiny Rockchip RK3308B SBC with up to 512MB DDR3, 8GB eMMC, microSD, WiFi 4, Bluetooth 5.0, and USB-C OTG — a postage-stamp Linux board for IoT and audio applications.
PhytiumPi
Linux SbcChinese Linux SBC by Phytium Technology featuring the domestic E2000Q quad-core Cortex-A55 compatible processor, up to 8GB DDR4, 32GB eMMC, Gigabit Ethernet, USB 3.0, and 12V DC, running Armbian for e
NanoPi R4S
FriendlyElec NanoPi R4S — RK3399-powered dual-Gigabit Ethernet router SBC with up to 4GB LPDDR4 RAM, 16GB eMMC, and microSD, popular for OpenWRT and home network gateway builds.
Radxa E25
Linux SbcFanless Rockchip RK3568J gateway and router board with dual 2.5GbE, 4x USB 3.0, mini-PCIe with SIM slot, M.2 NVMe, and 2GB/4GB LPDDR4 — designed for networking and industrial IoT.
NanoPi M4 V2
FriendlyElec NanoPi M4 V2 — RK3399 SBC with 4GB LPDDR4, 4× USB 3.0, M.2 expansion slot, eMMC module support, and 40-pin GPIO for demanding Linux desktop and NAS builds.
TI SK-AM62-LP Starter Kit
Linux SbcTexas Instruments AM62x Sitara low-power evaluation board with quad-core Cortex-A53, 1GB LPDDR4, microSD, 100Mbps Ethernet, USB-C, and 5V USB-C power — the LP variant optimized for ultra-low-power HMI
Radxa E52C
Linux SbcCompact Rockchip RK3582 router and gateway board with 4GB/8GB LPDDR4X, dual 2.5GbE, mini-PCIe with SIM slot, USB 3.0, and eMMC — ideal for network appliances and edge computing.
TI TMDS62LEVM
Linux SbcTexas Instruments AM62L display evaluation module with dual Cortex-A53 @ 1.25GHz, 2GB LPDDR4, 32GB eMMC, dual Gigabit Ethernet, DSI + HDMI display outputs, WiFi/BT M.2, and USB-C — purpose-built for e
NanoPi K2
FriendlyElec NanoPi K2 — Amlogic S905 SBC with 2GB DDR3, WiFi 802.11n, Bluetooth 4.0, 4× USB 2.0, Gigabit Ethernet, and HDMI for media and IoT Linux projects.
TI SK-AM62-SIP Starter Kit
Linux SbcTexas Instruments AM62x Sitara SiP ultra-compact evaluation board with 512MB LPDDR4 integrated in-package, microSD, 100Mbps Ethernet, USB-C, and 5V power — the smallest AM62 evaluation platform for sp
Radxa E54C
Linux SbcHigh-performance Rockchip RK3588S edge gateway with 8GB LPDDR4X, 4x Gigabit Ethernet ports (RTL8367RB switch), PCIe expansion, USB 3.0, HDMI, and 12V DC power — built for demanding network and edge AI
Heltec Wireless Shell V3
moduleUltra-compact ESP32-S3 + SX1262 LoRa module with stamp-hole design for direct PCB integration, supporting WiFi, BLE 5, and LoRa at 470-928MHz with deep sleep current under 10uA.
BeagleBone AI-64
Linux SbcOpen-source SBC powered by the TI TDA4VM automotive AI SoC with 8 TOPS neural accelerator, 4GB LPDDR4, and Gigabit Ethernet, designed for robotics and edge AI development.
TI SK-AM62B
Linux SbcTexas Instruments SK-AM62B Starter Kit — dual-core Cortex-A53 Sitara developer evaluation board for industrial HMI and IoT applications, running Armbian Linux.
TI SK-AM62P-LP Starter Kit
Linux SbcTexas Instruments AM62P Sitara vision-enabled evaluation board with quad-core Cortex-A53 @ 1.4GHz, vision DSP, 4GB LPDDR4, dual Gigabit Ethernet, M.2 WiFi, microSD, and 5V USB-C power for machine visi
TI SK-TDA4VM
Linux SbcTexas Instruments SK-TDA4VM Starter Kit — automotive ADAS evaluation board with dual Cortex-A72, six Cortex-R5F real-time cores, and 8 TOPS MMA accelerator for autonomous driving prototyping.
Le Potato
Libre Computer Le Potato — Amlogic S905X SBC with 2GB DDR4, 4K HDMI output, and Raspberry Pi-compatible 85.6×56.5mm form factor, supported by mainline Linux, Armbian, and Raspbian-compatible images.
Radxa Rockpi E
Linux SbcCompact Rockchip RK3328 SBC with up to 4GB DDR4, eMMC, microSD, Gigabit + Fast Ethernet, USB 3.0, optional WiFi/BT, and USB-C power — a versatile small Linux board for networking and IoT.
BeaglePlay
Linux SbcVersatile open-source SBC by BeagleBoard.org featuring the TI AM625 SoC, 2GB LPDDR4, 16GB eMMC, WiFi 5, Bluetooth 5.0, 802.15.4 sub-GHz radio, and Gigabit Ethernet for IoT and home automation.
TI SK-AM64B
Linux SbcTexas Instruments SK-AM64B Starter Kit — dual Cortex-A53 + quad Cortex-R5F industrial evaluation board for automation, motor control, and time-sensitive networking.
Adafruit Feather M0 WiFi (ATSAMD21 + ATWINC1500)
Dev BoardARM Cortex-M0+ Feather board with ATWINC1500 802.11 b/g/n WiFi, 256KB flash, 32KB RAM, 10 analog inputs, and built-in LiPo charger. FCC-certified WiFi for IoT and connected projects.
Radxa Rockpi S
Linux SbcTiny Rockchip RK3308 quad-core SBC with up to 512MB DDR3, 8GB eMMC, microSD, 100Mbps Ethernet, USB 2.0, optional WiFi/BT, and USB-C — a miniature Linux board for audio and IoT projects.
Sweet Potato
Libre Computer Sweet Potato — Amlogic S905X3 SBC with up to 4GB DDR4, 32GB eMMC, 4× USB 3.0, USB-C power, and 4K HDR output — a powerful upgrade over the Le Potato.
BeagleY-AI
Linux SbcRaspberry Pi HAT-compatible edge AI SBC by BeagleBoard.org, powered by the TI AM67A SoC with 4 TOPS neural accelerator, 4GB LPDDR4, 16GB eMMC, WiFi, and Gigabit Ethernet.
TI SK-AM68
Linux SbcTexas Instruments SK-AM68 Starter Kit — quad-core Cortex-A72 evaluation board with 8GB LPDDR4 and 4 TOPS vision processing for industrial machine vision and edge AI.
PocketBeagle 2
Linux SbcUltra-compact open-source Linux SBC by BeagleBoard.org, powered by the TI AM625 SoC with 512MB LPDDR4, USB-C OTG, and microSD — designed for deeply embedded projects where minimal size matters.
La Frite
Libre Computer La Frite — ultra-compact Amlogic S805X SBC with 512MB/1GB DDR4, 8GB eMMC, and 5V micro-USB power in a credit-card form factor for lightweight Linux and IoT applications.
TI SK-AM69
Linux SbcTexas Instruments SK-AM69 Starter Kit — octa-core Cortex-A72 evaluation board with 32GB LPDDR4 and 64 TOPS AI accelerator for high-performance edge AI and autonomous systems.
Renegade
Libre Computer Renegade — Rockchip RK3328 SBC with up to 4GB DDR4, 32GB eMMC, USB 3.0, USB-C power, and 4K HDR output, offering strong mainline Linux support at an affordable price.
BIGTREETECH CB1 V2.2
Linux SbcCompact Linux compute module by BIGTREETECH, powered by the Allwinner H616 SoC with 1GB DDR3, 100M WiFi + 100M Ethernet, and microSD — designed as a drop-in Raspberry Pi CM4 replacement for 3D printer
ODROID-C1
Linux SbcHardkernel ODROID-C1 — affordable quad-core Cortex-A5 SBC with 1GB DDR3, Fast Ethernet, and four USB 2.0 ports, one of the earliest Raspberry Pi competitors running Armbian.
Rock 2A
Radxa Rock 2A — Rockchip RK3528A SBC with up to 4GB LPDDR4X, 32GB eMMC, WiFi 5, Bluetooth 5.0, Gigabit Ethernet, and USB-C power in a compact, affordable form factor.
Tinker Board / S
Linux SbcRaspberry Pi form factor SBC by ASUS featuring the Rockchip RK3288 SoC, 2GB LPDDR3, WiFi 802.11n+Bluetooth 4.0, Gigabit Ethernet, and 4× USB 2.0. The S model adds 16GB eMMC.
Rock 2F
Radxa Rock 2F — ultra-compact Rockchip RK3528A SBC with 512MB/1GB/2GB DDR4, WiFi 4, Bluetooth 5.0, and 5V USB-C — the smallest and most affordable board in the Rock 2 family, with no built-in Ethernet
Pine64 / LTS
Linux SbcAffordable 64-bit Linux SBC by Pine64, powered by the Allwinner A64 SoC with up to 2GB LPDDR3, Gigabit Ethernet, 2× USB 2.0, and microSD — available in standard and Long-Term Support variants.
Xiaomi Pad 5 Pro
Linux SbcXiaomi Pad 5 Pro Android tablet (Snapdragon 870, 6GB/8GB LPDDR5, WiFi 6) running mainline Armbian Linux via community port — a high-resolution tablet repurposed as a Linux device.
Clearfog PRO
Linux SbcIndustrial-grade network computing SBC by SolidRun, powered by the Marvell Armada 388 SoC, 1GB DDR3, 4GB eMMC, dual Gigabit Ethernet + SFP, mPCIe, SATA, and 12V DC power for router and NAS application
Libre Computer Tritium H3
Linux SbcLibre Computer Tritium H3 — Allwinner H3 quad-core SBC with 1GB DDR3, 8GB eMMC, 100Mbps Ethernet, and four USB 2.0 ports in a Raspberry Pi 2/3 compatible layout.
Libre Computer Tritium H5
Linux SbcLibre Computer Tritium H5 — Allwinner H5 quad-core 64-bit SBC with 1GB/2GB DDR4, 8GB eMMC, Gigabit Ethernet, and four USB 2.0 ports in a Raspberry Pi-compatible layout.
Helios4
Linux SbcOpen-source 4-bay NAS server board by Kobol, powered by the Marvell Armada 388 SoC, 2GB DDR3, 4× SATA, Gigabit Ethernet, USB 3.0, and 12V DC — designed for self-hosted home and SMB network storage.
Radxa NIO 12L
Linux SbcRadxa NIO 12L — MediaTek Dimensity 1200 (MT8395) octa-core SBC with 8GB/16GB LPDDR4X, 64GB/128GB eMMC, WiFi 6, Gigabit Ethernet, and USB-C, running Armbian Linux.
ESP32-C6-WROOM-1-N8 Module
moduleEspressif ESP32-C6 WROOM module with 8MB flash and PCB antenna, supporting Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread — for soldering onto custom IoT hardware.
Helios64
Linux SbcOpen-source 5-bay NAS server board by Kobol, powered by the Rockchip RK3399 SoC, 4GB LPDDR4, eMMC, WiFi 5+BT 5.0, 2.5GbE, 5× SATA, and 12V DC — a high-performance personal cloud storage platform.
Radxa Dragon Q6A
Linux SbcRadxa Dragon Q6A — Qualcomm QCM6490 industrial SBC with 5G modem, 8GB LPDDR5, 64GB/128GB eMMC, WiFi 6E, Bluetooth 5.2, and USB-C for industrial edge computing.
JetHub D1 / D1+
Linux SbcDIN-rail mountable Linux IoT hub by JetHome, powered by the Amlogic S905W2 SoC with up to 4GB DDR4, 16GB eMMC, WiFi 5, Bluetooth 5.0, Gigabit Ethernet, and 12V DC — designed for home automation and in
JetHub H1
Linux SbcDIN-rail mountable Linux IoT hub by JetHome, powered by the Amlogic S905W SoC with 2GB DDR4, 8GB eMMC, WiFi 802.11n, Bluetooth 4.0, Gigabit Ethernet, and 12V DC — compact smart home controller for pan
Pycom GPy
Dev BoardESP32-based triple-network MicroPython board with WiFi 802.11 b/g/n, Bluetooth LE, and LTE CAT-M1/NB1 cellular. 4MB RAM, 8MB flash, 22 GPIO, breadboard-compatible. Ideal for global LTE IoT deployments
WiFi LoRa 32 (V3)
Dev BoardCompact ESP32-S3 + SX1262 LoRa development board with 0.96" OLED display, USB-C, and built-in LiPo charging. One of the primary boards for Meshtastic and LoRaWAN IoT projects.
WiFi LoRa 32 (V4)
Dev BoardUpgraded ESP32-S3R2 + SX1262 LoRa dev board with 2MB PSRAM, 16MB flash, 0.96" OLED, switchable FPC/IPEX 2.4G antenna, GNSS interface, and solar input. Meshtastic and LoRaWAN ready.
Adafruit Feather M0 Bluefruit LE
Dev BoardARM Cortex-M0+ dev board with Bluetooth LE (nRF51822) in the compact Feather form factor. Features 256KB flash, 32KB RAM, native USB, and a built-in LiPo charger for wireless wearable and IoT projects
Circuit Playground Classic
Dev BoardAll-in-one ATmega32u4 learning board with 10 NeoPixels, LIS3DH accelerometer, microphone, speaker, light and temperature sensors, and 8 capacitive touch pads in a circular 2-inch form factor.
Adafruit PyGamer
Handheld GamingHandheld gaming console and dev board powered by ATSAMD51J19 (120MHz Cortex-M4F) with a 1.8" TFT display, 5 NeoPixels, accelerometer, and Feather-compatible headers. Runs MakeCode Arcade, CircuitPytho
ESP32-C6-WROOM-1-N4 Module
moduleEspressif ESP32-C6 WROOM module with 4MB flash and PCB antenna, supporting Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread — for soldering onto custom IoT hardware.
Adafruit GEMMA M0
Dev BoardCoin-sized wearable microcontroller board with ATSAMD21E18 Cortex M0+ at 48MHz, 3 I/O sew pads, built-in RGB DotStar LED, and CircuitPython pre-installed. Designed for e-textiles and wearable projects
Adafruit Metro M7 with microSD
Dev BoardHigh-performance Arduino-compatible board powered by the NXP iMX RT1011 Cortex-M7 at 500 MHz, with 8MB QSPI flash, microSD slot, STEMMA QT, and USB-C.
Adafruit METRO M0 Express
Dev BoardArduino Uno-compatible development board powered by ATSAMD21G18 Cortex M0+ at 48MHz with 256KB flash, 32KB SRAM, 2MB SPI flash, and CircuitPython pre-loaded. Features Arduino shield compatibility and
FeatherS2 Neo ESP32-S2
featherESP32-S2 Feather-format board by Unexpected Maker with 4MB flash, 2MB PSRAM, 5×5 RGB LED matrix, LiPo charging, and STEMMA QT — designed for colorful wearable and IoT projects.
Adafruit Feather M0 WiFi with uFL
Dev BoardVariant of the Feather M0 WiFi (ATSAMD21 + ATWINC1500) with a u.FL antenna connector instead of a PCB trace antenna, allowing use of an external antenna for improved WiFi range.
Adafruit FLORA v3
Dev BoardRound, sewable Arduino-compatible wearable platform with ATmega32u4, native USB, NeoPixel, JST battery connector, and alligator-clip-friendly pads in a 45mm diameter form factor.
Adafruit Metro M7 with AirLift
Dev BoardArduino UNO-compatible Metro board powered by NXP iMX RT1011 at 500 MHz with an ESP32 AirLift WiFi co-processor, 8 MB QSPI Flash, and USB-C — Adafruit's fastest Metro ever.
Adafruit Feather RP2040 SCORPIO
featherRP2040 Feather board with 8 consecutive 5V-level-shifted PIO outputs dedicated to NeoPixel LED strip control, 8MB flash, USB-C, and LiPo charging.
Adafruit HalloWing M4 Express
Microcontroller BoardSkull-shaped ATSAMD51J19 dev board (120MHz Cortex-M4F) with a 1.54" 240×240 IPS TFT, 4 capacitive touch inputs, 4 NeoPixels, accelerometer, speaker driver, and LiPoly charging. Perfect for Halloween p
Adafruit Feather M0 RFM69HCW 868/915 MHz
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with RFM69HCW sub-GHz radio at 868/915 MHz. Up to +20 dBm TX power, AES-128 encryption, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.
Pycom Pytrack
IoT Sensor BoardGPS/GNSS tracking expansion board for Pycom modules with GLONASS/Galileo/QZSS support, 3-axis accelerometer, MicroSD slot, LiPo charger, USB serial, and 5 extra GPIO headers. Ultra-low 1µA deep sleep
Adafruit FunHouse
IoT ControllerWiFi IoT automation board with ESP32-S2, built-in 1.54″ color TFT, barometric pressure, humidity, temperature sensors, DotStar LEDs, capacitive touch, and a speaker.
Pycom Pysense
IoT Sensor BoardMulti-sensor expansion board for Pycom modules featuring light, barometric pressure, humidity, temperature, and 3-axis accelerometer sensors. Includes MicroSD slot, USB serial, LiPo charger, and ultra
Adafruit Feather 32u4 RFM69HCW 868/915 MHz
Dev BoardATmega32u4 Feather board with RFM69HCW sub-GHz radio supporting 868/915 MHz with up to +20 dBm transmit power, AES-128 encryption, and 100mA LiPo charger for long-range IoT sensor networks.
Arduino Due
Dev BoardArduino's first 32-bit ARM board based on the AT91SAM3X8E Cortex-M3 at 84 MHz with 512KB flash, 96KB SRAM, dual USB ports, 2 DACs, and 12 PWM channels in Mega form factor.
BBC micro:bit v1
Dev BoardPocket-sized educational microcontroller with nRF51822, 5×5 LED matrix, accelerometer, magnetometer, Bluetooth LE, 2 buttons, and 19 I/O pins. Designed for teaching coding to children and beginners vi
Adafruit Feather 32u4 RFM69HCW 433 MHz
Dev BoardATmega32u4 Feather board with RFM69HCW sub-GHz radio at 433 MHz with up to +20 dBm transmit power, AES-128 encryption, and built-in LiPo charger for long-range sensor networks in the 433 MHz ISM band.
ESP32-C6-DevKitC-1-N8
Dev BoardEspressif reference development board for the ESP32-C6 with 8MB flash, Wi-Fi 6, Bluetooth 5 LE, Zigbee 3.0, Thread, RGB LED, dual USB-C ports, and full GPIO breakout.
Circuit Playground Bluefruit
Educational BoardRound educational microcontroller with Nordic nRF52840 (64MHz Cortex-M4F + BLE), 10 NeoPixels, accelerometer, microphone, light sensor, speaker, 8 alligator-clip I/O pads, and USB. Runs CircuitPython,
Adafruit ESP32-S2 Feather
Dev BoardFeather-format ESP32-S2 board with 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, LiPoly charging, and MAX17048 battery monitor — WiFi IoT in the Feather ecosystem.
Adafruit Feather RP2040 with DVI Output
featherRP2040 Feather board with a DVI/HDMI-compatible output port for driving displays at up to 800×480, plus LiPo charging, USB-C, NeoPixel, and STEMMA QT.
M5Stack AtomS3R
Dev BoardUltra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD, BMI270 IMU, BMM150 magnetometer, 8MB PSRAM, IR transmitter, LP5562 RGB LED driver, and Grove port for IoT and robotics.
TinyS2 ESP32-S2
Dev BoardUltra-compact ESP32-S2 development board by Unexpected Maker in the TinyPICO form factor, with 4 MB flash, 2 MB PSRAM, native USB, WiFi, and LiPo charging at just 17.8 × 41 mm.
Pycom SiPy
Dev BoardESP32-based MicroPython development board with WiFi, Bluetooth LE, and +22dBm SigFox radio (RCZ2/RCZ4). Breadboard-compatible with ultra-low power modes, ideal for long-range sub-GHz IoT deployments.
Adafruit Feather 32u4 RFM95 LoRa 868/915 MHz
Dev BoardATmega32u4 Feather board with RFM95W SX1276 LoRa radio for 868/915 MHz long-range communication. Achieves 2+ km range, supports spreading factors SF6-SF12, and includes a built-in LiPo charger.
Adafruit Feather STM32F405 Express
Microcontroller BoardHigh-speed Feather-form-factor dev board with STM32F405 ARM Cortex-M4F @ 168MHz, 1MB Flash, 192KB RAM, 2MB SPI Flash, USB-C, STEMMA QT, SD card socket, and LiPo charging. Adafruit's fastest CircuitPyt
Adafruit GEMMA v2
Dev BoardTiny 27mm round sewable wearable microcontroller with ATtiny85 at 8 MHz, 3 GPIO, Micro USB programming, 3.3V power, and reverse-polarity protection — ideal for small LED and NeoPixel wearable projects
Netduino Plus
Dev BoardThe Netduino Plus is an open-source .NET Micro Framework microcontroller board with built-in Ethernet, Arduino-compatible pinout, and microSD slot — enabling C# development for connected embedded proj
Adafruit Feather nRF52 Pro
Dev BoardBluetooth 5.0 LE Feather board with nRF52832 ARM Cortex M4F at 64MHz, 512KB flash, 64KB SRAM, Apache Mynewt bootloader, SWD debug port, and built-in LiPo charging. For advanced BLE 5.0 open-source app
Adafruit Feather RP2040 RFM69 868/915 MHz
featherRP2040 Feather with integrated RFM69HCW 868/915 MHz packet radio transceiver, 8MB flash, LiPo charging, STEMMA QT, and uFL antenna connector for long-range wireless mesh networks.
Netduino 3
Dev BoardThe Netduino 3 is an open-source .NET Micro Framework development board powered by the STM32F427VG ARM Cortex-M4 at 168MHz, featuring Arduino shield compatibility, 3 GOBUS ports, and 6 analog input ch
Adafruit Feather 32u4 RFM96 LoRa 433 MHz
Dev BoardATmega32u4 Feather board with RFM96W SX1278 LoRa radio for 433 MHz long-range communication. Achieves 2+ km range with quarter-wave antennas, supports LoRaWAN, and includes a built-in LiPo charger.
PIC32 Pinguino
Dev BoardThe PIC32 Pinguino is an open-source Arduino-form-factor development board based on the Microchip PIC32MX440F256H 32-bit processor at 80MHz, with industrial-grade power input, LiPo battery support, an
Adafruit Feather RP2040 with RFM95 LoRa 915 MHz
featherRP2040 Feather with integrated RFM95W LoRa radio at 915 MHz (SX1276), 8MB flash, up to 20 km range, LiPo charging, STEMMA QT, and uFL antenna connector.
ESP32-S2 HMI DevKit 1
Dev BoardEspressif ESP32-S2-WROVER HMI development kit with a 4.3″ 800×480 capacitive touchscreen, onboard IMU, microphone, speaker, microSD, IR, and RGB LEDs — designed for smart-home panel prototyping.
Adafruit PyPortal Titano
Iot DisplayLarge-screen IoT display board with ATSAMD51J20 + ESP32 WiFi coprocessor, 3.5" 320×480 resistive touchscreen TFT, 8MB Flash, microSD, speaker, and USB-C. Designed for Python-powered internet-connected
Adafruit Trinket 3.3V
Dev BoardTiny 27×15mm Arduino-compatible microcontroller board with ATtiny85 at 8 MHz, 3.3V logic, 8KB flash, 3 GPIO pins, and Micro USB programming for minimal space-constrained projects.
Arduino MKR1000
Dev BoardCompact Arduino board with SAMD21 ARM Cortex-M0+ and ATSAMW25 integrated WiFi (802.11 b/g/n) with cryptochip and SSL support. Built-in LiPo charger, 8 digital I/O, and 7 analog inputs in a slim 65mm f
ESP32-S3 Box
Dev BoardEspressif AIoT development kit with ESP32-S3, a 2.4″ 320×240 capacitive touchscreen, dual microphones, speaker, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, and Pmod expansion.
Pycom FiPy
Dev BoardFive-network ESP32 MicroPython board with WiFi, Bluetooth LE, LoRa, SigFox, and dual LTE-M (CAT-M1/NB1). 4MB RAM, 8MB flash, 22 GPIO. The most connected Pycom module for versatile LPWAN IoT applicatio
ESP32-H2-DevKitM-1-N4S
Dev BoardEspressif development board for the ESP32-H2 with Bluetooth 5 LE, Zigbee 3.0, Thread, and Matter support, 4MB flash, USB-C, RGB LED, and full GPIO breakout — no Wi-Fi.
Adafruit ItsyBitsy nRF52840 Express
Microcontroller BoardTiny breadboard-friendly Bluetooth LE board with Nordic nRF52840 Cortex-M4F @ 64MHz, 1MB Flash, 256KB RAM, 2MB QSPI Flash, 21 GPIO, and native USB — all in a 36×17.6mm footprint. Supports CircuitPytho
ESP32-H2-MINI-1 Module
moduleEspressif ESP32-H2 MINI module with 4MB flash and PCB antenna, supporting Bluetooth 5 LE, Zigbee 3.0, Thread, and Matter — a compact bare module for custom PCB designs without Wi-Fi.
Netduino Plus 2
Dev BoardThe Netduino Plus 2 is an Arduino R3-compatible .NET Micro Framework development board with a 168MHz ARM Cortex-M4 processor, built-in Ethernet, microSD slot, and 12-bit ADC — offering C# programming
Adafruit ItsyBitsy 32u4 3V 8MHz
Dev BoardUltra-compact 3.3V Arduino-compatible board with ATmega32u4 at 8MHz, native USB HID, 23 GPIO pins, 2KB RAM, 28KB flash, and Micro USB. Measures 35mm × 17mm — smaller than a Feather with equivalent AVR
Adafruit Feather RP2040 with USB Type A Host
featherRP2040 Feather with a dedicated USB Type-A host port powered by a 5V boost converter, enabling connection to USB devices like keyboards, mice, and MIDI controllers alongside standard USB-C programming
Adafruit Feather nRF52840 Sense
Microcontroller BoardSensor-rich BLE Feather with Nordic nRF52840 (64MHz Cortex-M4F), 6 onboard sensors (9-DoF IMU, magnetometer, proximity/light, PDM mic, humidity, barometric pressure), 21 GPIO, and FCC/IC/TELEC certifi
Netduino 3 WiFi
Dev BoardThe Netduino 3 WiFi is a .NET Micro Framework development board with an STM32F427 ARM Cortex-M4 at 168MHz, integrated WiFi with WPA2/SSL support, Arduino shield compatibility, and 3 GOBUS expansion po
Adafruit ESP32-S2 Feather with BME280
Dev BoardESP32-S2 Feather with an onboard BME280 temperature, humidity, and barometric pressure sensor, plus 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, and LiPoly charging.
Adafruit My Little Hacker ESP32-S2
Dev BoardChild-oriented ESP32-S2 dev board with 4MB flash, 2MB PSRAM, 5 NeoPixels, microSD, I2S audio amplifier for speakers, USB-C, STEMMA QT, and AA battery or USB-C power support.
Pycom LoPy4
Dev BoardESP32-based quad-network MicroPython board with WiFi, Bluetooth LE, LoRa (SX1276 868/915/433MHz), and SigFox. 4MB PSRAM, 8MB flash, 24 GPIO. Can function as a nano LoRa gateway. FCC/CE certified.
Adafruit Feather M0 RFM69HCW 433 MHz
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with RFM69HCW sub-GHz radio at 433 MHz. Up to +20 dBm TX power, AES-128 encryption, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.
PJRC Teensy 4.1
Microcontroller BoardHigh-performance microcontroller with NXP i.MX RT1062 ARM Cortex-M7 @ 600MHz, 1MB RAM, 2MB Flash, 100Mbps Ethernet PHY, SD card, 55 GPIO, dual 480Mbps USB, and 3 CAN Bus. Expanded Teensy 4.0 sibling.
TinyS3 ESP32-S3 with u.FL
Dev BoardUltra-compact ESP32-S3 board by Unexpected Maker in TinyPICO form factor with u.FL external antenna connector, 8MB flash, 8MB PSRAM, LiPo charging, and dual-core 240 MHz.
Netduino 3 Ethernet
Dev BoardThe Netduino 3 Ethernet is a .NET Micro Framework board with an STM32F427VI ARM Cortex-M4 at 168MHz, wired Ethernet with full TCP/IP stack, microSD storage, Arduino shield compatibility, and 3 GOBUS p
FeatherS3 ESP32-S3 with u.FL
featherUnexpected Maker's pro ESP32-S3 Feather board with u.FL external antenna connector, 16MB flash, 8MB PSRAM, dual STEMMA QT connectors, LiPo charging, and dual 700mA regulators.
ESP32-S3-DevKitC-1
Dev BoardEspressif official ESP32-S3 development board with ESP32-S3-WROOM-1 module, dual-core 240 MHz LX7, up to 45 GPIO, dual USB ports, and available in three memory variants: 8MB/2MB PSRAM, 8MB/8MB PSRAM,
Adafruit HUZZAH ESP8266 Breakout
Dev BoardBreadboard-friendly ESP8266 WiFi breakout at 80 MHz with 802.11 b/g/n, 9 GPIO, 3.3V logic, 500mA regulator, and pre-loaded NodeMCU firmware — Adafruit's accessible entry point to ESP8266 development.
Raspberry Pi Zero WH
Dev BoardRaspberry Pi Zero W with pre-soldered 40-pin GPIO headers. BCM2835 single-core 1GHz ARM11, 512MB RAM, built-in 802.11 b/g/n WiFi (BCM43143), Bluetooth LE, Mini HDMI, Micro USB, and MicroSD. No solderi
Adafruit Feather M0 RFM95 LoRa 900 MHz
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with RFM95W SX1276 LoRa radio for 868/915 MHz. Achieves 2+ km range, supports LoRaWAN, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.
ProS3 ESP32-S3 with u.FL
Dev BoardUnexpected Maker's ProS3 ESP32-S3 with u.FL external antenna, 16MB flash, 8MB PSRAM, 27 GPIO castellated headers, dual LDO regulators, LiPo charging, and STEMMA QT.
ESP32-S3-DevKitM-1
Dev BoardEspressif official ESP32-S3 development board using the compact ESP32-S3-MINI-1 module, with dual-core 240 MHz LX7, 8 MB flash, up to 45 GPIO, dual USB ports, and smaller footprint than the WROOM-1.
Adafruit ItsyBitsy M0 Express
Dev BoardCompact 3.3V CircuitPython/Arduino board with ATSAMD21G18 Cortex M0+ at 48MHz, 32KB RAM, 256KB flash, 2MB SPI flash, 23 GPIO with 11 analog inputs, RGB DotStar LED, native USB. Measures 36mm × 18mm.
Adafruit Metro RP2040
Dev BoardArduino-Uno-compatible development board powered by the RP2040 with 16MB QSPI flash, microSD slot, STEMMA QT, onboard NeoPixel, USB-C, and an RX/TX switch for serial flexibility.
Adafruit Feather M0 RFM96 LoRa 433 MHz
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with RFM96W SX1278 LoRa radio for 433 MHz. Achieves 2+ km range, supports LoRaWAN, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.
Adafruit ESP32-S3 Feather (8MB Flash, No PSRAM)
Dev BoardFeather-format ESP32-S3 dual-core 240 MHz board with 8 MB flash, native USB-C, BLE, WiFi, STEMMA QT, LiPoly charging, and MAX17048 — no PSRAM variant for leaner memory budgets.
ESP32-C3-DevKit-RUST-2
Dev BoardEspressif RISC-V dev board optimized for Rust programming, featuring ESP32-C3-MINI-1 with 4MB flash, Wi-Fi, BT5, onboard ICM-42670-P IMU, SHTC3 temperature/humidity sensor, and USB-C.
Adafruit QT Py ESP32-S2
Dev BoardTiny Seeed XIAO-compatible ESP32-S2 dev board with 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, WiFi, 13 GPIO, and 10 ADC inputs — no Bluetooth, all in a 21.8 × 17.9 mm footprint.
ESP32-S2 Saola 1R Dev Kit
Dev BoardEspressif official ESP32-S2-WROVER development board with dual 20-pin headers (breadboard-friendly), 8MB Flash, 2MB PSRAM, WiFi, dual Micro-USB (native USB + UART bridge), NeoPixel RGB LED, and boot/r
Adafruit Feather M4 Express
Dev BoardHigh-performance Feather with ATSAMD51J19 Cortex M4F at 120MHz, 192KB RAM, 512KB flash, 2MB SPI flash, dual 12-bit DAC/ADC, AES-256 hardware crypto, LiPo charging, 21 GPIO, and native USB HID. Feather
Adafruit Feather 32u4 Basic Proto
Dev BoardFeather-format ATmega32u4 board at 8 MHz, 3.3V with LiPo charging, native USB, onboard prototyping area, 20 GPIO, JST battery connector, and 100mA integrated charger — all in 51×23mm.
ESP32-S2 Kaluga Dev Kit
Dev BoardEspressif's multimedia-focused ESP32-S2 evaluation platform bundling four extension boards: audio player, capacitive touch panel, 3.2" LCD display, and camera module. Designed to showcase ESP32-S2 hum
Heltec Vision Master T190
Dev BoardESP32-S3 development board with optional SX1262 LoRa module and 1.9-inch TFT color display. Supports Meshtastic, LoRaWAN, Arduino, MicroPython, and features integrated battery management with 18uA dee
ESP32-S3 Korvo 2 Audio Dev Board
Dev BoardEspressif audio and multimedia development board with ESP32-S3, dual-microphone array for far-field wake-word detection, camera support, LCD interface, microSD, and Wi-Fi + BLE.
ESP32-C3 DevKitM-01
Dev BoardEspressif official RISC-V ESP32-C3 dev board with ESP32-C3-MINI-1 module, 4 MB embedded SPI Flash, WiFi 4, BLE 5, Micro-USB, RGB LED, and a compact footprint for IoT prototyping.
Espressif ESP32-S3-BOX-3
Dev BoardOpen-source AIoT development kit with ESP32-S3, 2.4" touchscreen, dual microphones, speaker, Wi-Fi, BLE, Matter support, 16MB flash, 16MB PSRAM, and a high-density expansion connector.
Adafruit HalloWing M0 Express
Dev BoardSkull-shaped wearable microcontroller with ATSAMD21G18 at 48MHz, 1.44" 128x128 TFT display, 3-axis accelerometer, light sensor, 4 capacitive touch pads, 2W speaker driver, 8MB SPI flash, and LiPo char
Adafruit QT Py ESP32-S2 with uFL Antenna
Dev BoardQT Py-sized ESP32-S2 dev board with a uFL connector for an external 2.4 GHz antenna, 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, and 13 GPIO — for improved WiFi range.
Adafruit Feather M4 CAN Express
Microcontroller BoardCAN-bus-capable Feather with ATSAME51J19 ARM Cortex-M4F @ 120MHz, built-in CAN transceiver + 5V booster, USB-C, 21 GPIO, 2MB SPI Flash, dual DAC, and LiPo charging. Ideal for automotive and industrial
Espressif ESP32-S3-BOX-3B
Dev BoardESP32-S3-BOX-3 bundle kit including the AIoT dev board with 2.4" touchscreen, dual mics, speaker, plus the DOCK stand, RGB LED module, USB-C cable, and Dupont wires.
Heltec HT-M00 Dual Channel LoRa Gateway
Lora GatewayA compact, low-cost dual-channel LoRaWAN gateway based on ESP32 and dual SX1276 transceivers, designed for indoor LoRa coverage of 1500-2000 square meters with support for SF7-SF12 spreading factors a
Adafruit Feather 32u4 Adalogger
Dev BoardFeather-format ATmega32u4 data logger at 8 MHz, 3.3V with onboard microSD slot, LiPo charging, native USB, 20 GPIO, and 100mA charger — built for portable data logging applications.
Circuit Playground Express
Dev BoardAll-in-one ATSAMD21 learning board with 10 NeoPixels, LIS3DH accelerometer, MEMS microphone, speaker with class D amp, IR transmit/receive, 7 capacitive touch pads, and 2MB SPI flash for CircuitPython
Adafruit PyBadge LC
Dev BoardLow-cost credit card-sized gaming/badge board with ATSAMD51J19 at 120MHz, 1.8\" 160x128 TFT, 8 game buttons, 1 NeoPixel, light sensor, buzzer, 2MB SPI flash, and MicroSD. Supports MakeCode Arcade, Cir
FeatherS2 ESP32-S2
Dev BoardFull-featured ESP32-S2 Feather-compatible board by Unexpected Maker with 16MB Flash, 8MB QSPI PSRAM, WiFi, native USB-C, 21 GPIO, STEMMA QT, APA102 RGB LED, ambient light sensor, and dual 700mA LDOs.
Adafruit QT Py ESP32 Pico
Dev BoardQT Py-sized classic ESP32 board with ESP32-PICO-V3-02, 8 MB flash, 2 MB PSRAM, WiFi, dual-core, Bluetooth Classic + BLE, STEMMA QT, and 13 GPIO — without native USB.
Adafruit PyPortal
Dev BoardThe Adafruit PyPortal is an all-in-one CircuitPython WiFi IoT display board featuring an ATSAMD51J20 Cortex-M4F, ESP32 WiFi coprocessor, 3.2" 320×240 color touchscreen, built-in speaker, NeoPixel, mic
Adafruit ESP32-S3 Feather 8MB w.FL Antenna
featherESP32-S3 Feather board with 8MB flash, w.FL external antenna connector (MHF3/IPEX3), native USB-C, MAX17048 battery monitor, LiPo charging, NeoPixel, and STEMMA QT.
Adafruit Metro ESP32-S2
Dev BoardArduino Uno-compatible WiFi dev board with ESP32-S2 single-core @ 240MHz, 4MB Flash, 2MB PSRAM, native USB-C, STEMMA QT, LiPoly charging, MAX17048 fuel gauge, barrel jack, and UNO shield compatibility
TinyS3 ESP32-S3
Dev BoardUltra-compact ESP32-S3 dev board by Unexpected Maker in the TinyPICO form factor — dual-core 240 MHz LX7, 8 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 17 GPIO, LiPo charging at 35 × 17.8 mm.
Adafruit ItsyBitsy ESP32 PCB Antenna
Dev BoardCompact ItsyBitsy-format ESP32 board with 8MB flash, 2MB PSRAM, PCB antenna, Wi-Fi + Bluetooth Classic + BLE, 20 GPIO, NeoPixel, STEMMA QT, and Micro-B USB.
Heltec HT-M01S Indoor LoRa Gateway (Rev.2.0)
Compact 8-channel LoRaWAN gateway based on ESP32 and SX1303 + SX1250, with WiFi and Ethernet backhaul, 1.8-inch TFT display, and aluminum housing. Supports LoRaWAN Class A/C, TTN, and ChirpStack.
Pycom WiPy 3.0
moduleESP32-based MicroPython IoT module with 802.11b/g/n WiFi, Bluetooth LE and Classic, 8MB flash, 4MB RAM, and ultra-low power ULP co-processor for deep-sleep GPIO monitoring at 25 µA.
FeatherS3 ESP32-S3
Dev BoardPro ESP32-S3 Feather-form-factor board by Unexpected Maker — dual-core 240 MHz LX7, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 21 GPIO, 2× STEMMA connectors, dual LDOs, LiPo charging.
Adafruit Feather HUZZAH ESP8266
Dev BoardAll-in-one ESP8266 WiFi Feather board at 80 MHz with 802.11 b/g/n, USB-serial (CP2104), LiPo charging, 9 GPIO, and 4MB flash — the easiest way to add WiFi to a portable battery-powered project.
Raspberry Pi Compute Module 3+
Compute ModuleThe Raspberry Pi Compute Module 3+ is a SODIMM-form-factor system-on-module with the BCM2837B0 quad-core Cortex-A53 at 1.2GHz, 1GB LPDDR2 RAM, and eMMC storage variants of 8GB, 16GB, 32GB, or the stor
Adafruit ItsyBitsy ESP32 wFL Antenna
Dev BoardCompact ItsyBitsy-format ESP32 board with 8MB flash, 2MB PSRAM, w.FL external antenna connector, Wi-Fi + Bluetooth Classic + BLE, 20 GPIO, NeoPixel, STEMMA QT, and Micro-B USB.
Pycom LoPy 1.0
moduleESP32-based MicroPython module combining 802.11b/g/n WiFi, Bluetooth, and LoRa/LoRaWAN (868/915 MHz) in one board. Can act as a nano LoRa gateway and is 100% Python programmable for multi-protocol IoT
BBC micro:bit v2
Educational BoardUpgraded BBC micro:bit with Nordic nRF52833 Cortex-M4F, Bluetooth 5.1, 5×5 LED matrix, 2 buttons, capacitive touch logo, built-in speaker and MEMS microphone, edge connector, and low-power mode. Same
ProS3 ESP32-S3
Dev BoardUnexpected Maker's ultimate ESP32-S3 dev board — dual-core 240 MHz LX7, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 27 GPIO, 2× LDOs, castellated headers, STEMMA, LiPo charging, JTAG.
Adafruit Feather 32u4 Bluefruit LE
Dev BoardFeather-format ATmega32u4 board with integrated nRF51822 Bluetooth LE, LiPo charging, native USB, 20 GPIO, and over-the-air firmware updates — an all-in-one BLE development board for iOS and Android c
Adafruit Monster M4SK
Dev BoardThe Adafruit Monster M4SK is a wearable dual-display Halloween mask board powered by ATSAMD51 Cortex-M4F at 120MHz with 8MB flash, two 240×240 IPS TFT eye displays, stereo audio, microphone, STEMMA co
Heltec LoRa Kit 151
Ultra-low-power LoRaWAN development kit based on STM32L151CBU6 ARM Cortex-M3 MCU and Semtech SX1278 LoRa transceiver, with 6uA deep sleep current, integrated battery management, and CE certification.
Adafruit Metro RP2350
Dev BoardArduino-Uno-compatible board with RP2350, dual ARM Cortex-M33 at 150 MHz, 520KB SRAM, 16MB QSPI flash, microSD, HSTX port, 23 GPIO on headers, NeoPixel, STEMMA QT, and USB-C.
Adafruit Metro M4 Express AirLift
Dev BoardArduino Uno-compatible board with ATSAMD51J19 Cortex M4F at 120MHz, ESP32 AirLift WiFi co-processor with TLS/SSL, 512KB flash, 192KB RAM, 2MB QSPI flash, 25 GPIO, dual DAC/ADC, and native USB. Arduino
Adafruit QT Py ESP32-C3
Dev BoardTiny RISC-V ESP32-C3 dev board in the QT Py / Seeed XIAO footprint with 4 MB flash, WiFi, BLE 5 with Mesh, STEMMA QT, 13 GPIO, 5 ADC inputs, and USB-C — no native USB.
Arduino Zero
Dev Board32-bit ARM Cortex-M0+ Arduino in UNO form factor with ATSAMD21G18 at 48 MHz, 256KB flash, 32KB SRAM, onboard EDBG debugger, dual USB ports, 12-bit ADC/DAC — designed for IoT, wearables, and robotics.
Adafruit QT Py ESP32-S3
Dev BoardTiny dual-core ESP32-S3 dev board in the QT Py / Seeed XIAO footprint — 8 MB flash, WiFi, BLE 5, native USB-C, STEMMA QT, 13 GPIO, 10 ADC inputs, no PSRAM variant.
Adafruit Feather nRF52840 Express
Dev BoardFeather board with nRF52840 ARM Cortex-M4F at 64MHz, BLE 5.0, native USB (CDC/HID/MIDI/MSC), 1MB flash, 256KB SRAM, 2MB QSPI flash, 21 GPIO, SWD debug, and LiPo charging. Supports Arduino and CircuitP
Adafruit Matrix Portal M4
Dev BoardThe Adafruit Matrix Portal M4 is a plug-in controller for HUB75 RGB LED matrix panels, featuring an ATSAMD51J19 Cortex-M4F at 120MHz, ESP32 WiFi coprocessor with TLS/SSL, LIS3DH accelerometer, USB-C p
Adafruit ESP32-S3 Feather (4MB Flash, 2MB PSRAM)
Dev BoardFeather-format ESP32-S3 board with 4 MB flash and 2 MB PSRAM, dual-core 240 MHz, native USB-C, BLE 5, WiFi, STEMMA QT, LiPoly charging, and MAX17048 battery monitor.
Adafruit Grand Central M4 Express
Dev BoardArduino Mega-form-factor board with ATSAMD51P20 Cortex M4F at 120MHz, 1MB flash, 256KB RAM, 8MB QSPI flash, 70 GPIO pins, SD card slot, 8 SERCOM, 22 PWM outputs, dual DAC/ADC, AES-256, and native USB.
Adafruit Metro ESP32-S3
Dev BoardArduino UNO-compatible Metro board with ESP32-S3 dual-core 240 MHz, 16 MB flash, 8 MB Octal PSRAM, WiFi, BLE 5, native USB-C, STEMMA QT, LiPoly charging, and JTAG debug header.
Adafruit Metro M4 Express (ATSAMD51)
Dev BoardArduino-compatible development board with ATSAMD51 ARM Cortex-M4F at 120 MHz, 512KB flash, 192KB RAM, 2MB QSPI flash, dual 1 MSPS DACs, crypto engine, NeoPixel, and native USB. CircuitPython and Ardui
Adafruit HUZZAH32 ESP32 Breakout
Dev BoardMinimal ESP32 breakout board with dual-core Xtensa LX6 at 240MHz, 520KB SRAM, 4MB flash, WiFi 802.11 b/g/n, Bluetooth Classic + BLE, 12 ADC, 2 DAC. No USB converter or battery charger — requires exter
Adafruit MagTag
Dev BoardThe Adafruit MagTag is an ESP32-S2 WiFi e-paper IoT display board featuring a 2.9" 296×128 grayscale e-ink screen, 4 NeoPixels, LIS3DH accelerometer, 4 user buttons, STEMMA QT, USB-C, LiPo charging, a
ESP32-S3 Box Lite
Dev BoardEspressif AIoT dev kit — ESP32-S3, 2.4″ 320×240 display, dual MEMS microphones, speaker, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, Pmod expansion — the dock-free Lite sibling of the ESP32-S3 Box.
Adafruit PyBadge
Dev BoardCredit card-sized gaming and badge board with ATSAMD51J19 at 120MHz, 1.8\" 160x128 TFT, 8 game buttons, 5 NeoPixels, LIS3DH accelerometer, light sensor, 2W speaker, 2MB SPI flash, Feather headers, STE
Arduino MKR WiFi 1010
Microcontroller BoardCompact IoT Arduino with SAMD21 Cortex-M0+ @ 48MHz, u-blox NINA-W102 WiFi + Bluetooth module, ATECC508 crypto chip, 256KB Flash, 32KB SRAM, USB full-speed, LiPo charging, and MKR shield compatibility.
ESP32-S2 WROOM Module
ESP32 S2The ESP32-S2 WROOM is an Espressif WiFi module with a single-core Xtensa LX7 at 240MHz, 4MB flash, 320KB SRAM, built-in PCB antenna, native USB OTG, and rich peripheral support — a cost-effective WiFi
Raspberry Pi Zero W
sbcUltra-compact single-board computer with BCM2835 ARM11 at 1 GHz, 512MB RAM, built-in 802.11b/g/n WiFi (BCM43143), Bluetooth 4.1 LE, mini HDMI, microSD, camera connector, and 40-pin GPIO header in a 65
Adafruit Feather RP2040
Microcontroller BoardFeather-form-factor board with Raspberry Pi RP2040 dual-core Cortex-M0+ @ 133MHz, 264KB SRAM, 8MB Flash, 21 GPIO, 4 ADC, 2 PIO peripherals, USB-C with UF2 bootloader, STEMMA QT, and LiPo charging. Run
Adafruit Feather M0 Express
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with 2MB SPI flash for CircuitPython code storage, built-in NeoPixel, 256KB flash, 32KB RAM, native USB, and 100mA LiPo charger. The dedicated CircuitPython Fe
Adafruit ItsyBitsy RP2040
Microcontroller BoardTiny 36×18mm breadboard-friendly board with Raspberry Pi RP2040 dual-core Cortex-M0+ @ 133MHz, 264KB SRAM, 8MB Flash, 23 GPIO, 4 ADC, 2 PIO peripherals, and Micro-USB. Runs CircuitPython and MicroPyth
Adafruit HUZZAH32 – ESP32 Feather
Dev BoardESP32 dual-core 240 MHz Feather board with 802.11b/g/n WiFi, Bluetooth 4.2 Classic and BLE, 4MB flash, 520KB SRAM, 12 ADC channels, 2 DACs, capacitive touch, and built-in LiPo charger.
Adafruit Feather nRF52 Bluefruit LE (nRF52832)
Dev BoardnRF52832 ARM Cortex-M4F Feather board with native Bluetooth 5 LE at 64 MHz, 512KB flash, 64KB RAM, 8 analog inputs, 12 PWM channels, and built-in LiPo charger. FCC/IC/TELEC certified for production BL
Adafruit Trinket M0
Dev BoardUltra-compact ATSAMD21E18 ARM Cortex-M0+ board at 48 MHz with 256KB flash, 32KB RAM, 5 GPIO pins, built-in RGB DotStar LED, capacitive touch, native USB, and CircuitPython support. Weighs just 1.4g in
Adafruit Feather 32u4 RFM69HCW (868/915 MHz)
Dev BoardFeather-format development board combining the ATmega32u4 microcontroller with an RFM69HCW 868/915 MHz packet radio for low-power sub-GHz wireless applications.
ESP32-C6 DevKitC-1-N8
Dev BoardOfficial Espressif development board featuring the ESP32-C6 — a RISC-V single-core MCU with WiFi 6, BLE 5.0, Zigbee 3.0, Thread 1.3, and native Matter support. 8MB flash, USB-C JTAG/serial.
Adafruit Feather 32u4 RFM96 LoRa (433 MHz)
Dev BoardFeather-format development board combining the ATmega32u4 microcontroller with an RFM96 LoRa 433 MHz transceiver for long-range, low-power IoT applications.
Adafruit Feather 32u4 RFM95 LoRa (900 MHz)
Dev BoardFeather-format development board combining the ATmega32u4 microcontroller with an RFM95 LoRa 868/915 MHz transceiver for long-range, low-power IoT applications.
Arduino Portenta X8
Compute ModuleIndustrial-grade Linux SoM with NXP i.MX 8M Mini quad-core Cortex-A53 at 1.8GHz + STM32H747 dual-core Cortex-M7/M4, 2GB RAM, WiFi/BLE, NXP SE050 hardware security, Docker containers, and OTA updates f
ESP32-H2 DevKitM-1-N4S
Dev BoardOfficial Espressif development board for the ESP32-H2 — a RISC-V MCU purpose-built for 802.15.4 wireless protocols: BLE 5.3, Zigbee 3.0, Thread 1.3, and Matter. No WiFi. 4MB flash, USB-C with CH343P.
Pycom LoPy
Dev BoardThe Pycom LoPy is a compact triple-network MicroPython-programmable board featuring ESP32 with built-in WiFi, BLE 4.2, and LoRa (SX1272) on 868/915 MHz — ideal for IoT mesh networking and asset tracki
Adafruit ItsyBitsy ESP32
Dev BoardUltra-compact ESP32 development board in the ItsyBitsy form factor with WiFi, Bluetooth Classic + BLE, USB-C, and LiPo charging — perfect for space-constrained wireless projects.
Pycom WiPy 3.0
Dev BoardThe Pycom WiPy 3.0 is a compact MicroPython-programmable ESP32 board with WiFi 802.11 b/g/n and Bluetooth BLE 4.2, designed for low-power wireless IoT applications and smart-home prototyping.
Adafruit HUZZAH32 ESP32 Feather Board
Dev BoardAdafruit's Feather-format ESP32 board with dual-core Xtensa LX6 @ 240MHz, WiFi b/g/n, Bluetooth Classic + BLE 4.2, built-in LiPo charger, and Feather-compatible pin layout. Great all-around wireless I
Adafruit Matrix Portal S3
Dev BoardESP32-S3 board designed to drive HUB75 LED matrix panels directly, with built-in WiFi, BLE 5.0, native USB, STEMMA QT connector, and two user buttons — ideal for dynamic digital signage and LED art di
Adafruit Feather M0 RFM69HCW Packet Radio (868/915 MHz)
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with RFM69HCW sub-GHz radio at 868/915 MHz. Up to +20 dBm TX power, AES-128 encryption, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.
Adafruit Feather ESP32-S3
Dev BoardFeather-format ESP32-S3 board with native USB, WiFi, BLE 5.0, 8MB flash, LiPo charging, and full Feather ecosystem compatibility — a capable wireless development platform for CircuitPython and Arduino
Adafruit Feather M0 RFM95 LoRa Radio (868/915 MHz)
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with RFM95 LoRa radio at 868/915 MHz. Spread-spectrum LoRa modulation for multi-kilometre range, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.
Heltec Wireless Stick Lite V3
Dev BoardCompact ESP32-S3 + SX1262 LoRa development board with WiFi, BLE 5.0, and integrated battery management. Meshtastic and LoRaWAN compatible, with a slim stick form factor ideal for IoT sensor nodes and
M5Stack FIRE V2.7
Dev BoardFeature-rich ESP32 IoT dev kit with 2.0" IPS display, 8MB PSRAM, 16MB flash, MPU6886 IMU, BMM150 magnetometer, 10x SK6812 RGB LEDs, microphone, speaker, microSD, 500mAh battery, and M5GO charging base
M5Stack Basic Core V2.7
Dev BoardCompact ESP32 IoT dev kit with 2.0" IPS LCD (320x240), 16MB flash, microSD, speaker, 110mAh battery, and three Grove ports in a stackable 54mm square enclosure.
BeagleV-Ahead
Single Board ComputerOpen-source RISC-V single board computer with Alibaba T-Head TH1520 quad-core Xuantie C910 at 2GHz, 4 TOPS NPU, 4GB LPDDR4, 16GB eMMC, WiFi/Bluetooth, Gigabit Ethernet, micro-HDMI, and BeagleBone cape
Heltec WiFi Kit 8
Development BoardESP8266-based IoT development board by Heltec with built-in 0.91-inch OLED display, Li-Po battery management, and WiFi connectivity in a compact 50.9x18.2mm form factor.
M5Stack CoreS3 Lite
Dev BoardESP32-S3 IoT controller with 2.0" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, 200mAh battery, and Grove expansion port
Heltec HT1303
LoRa Concentrator ModuleA mini-PCIe LoRaWAN concentrator module based on Semtech SX1303 + SX1250, enabling easy integration of LPWAN gateway capabilities into routers, Raspberry Pi, or other platforms with standard mini-PCIe
M5Stack Station-Bat
Industrial ControllerIndustrial ESP32 controller with 1.14" IPS LCD, 6 Grove ports, INA3221 power monitor, MPU6886 IMU, RTC, 7x SK6812 LEDs, dual 18650 battery holders, USB-A power output, and 16MB flash.
Heltec Sufficient IoT Hub
SBCLinux-based IoT hub with Allwinner T113-S3 dual-core ARM Cortex-A7 SoC, LoRa (SX1262), WiFi, Ethernet, and optional LTE. Runs Debian 10 with a dedicated IoT OS, CLI, and web UI for no-code device mana
Heltec CubeCell AM02 Module Plus
moduleUltra-compact LoRa/LoRaWAN module based on the ASR6502 SoC (ARM Cortex-M0+ @ 48MHz + SX1262), designed for SMT integration into custom IoT sensor nodes with 3.5uA deep sleep current.
Heltec HT-HC32 Wi-Fi HaLow Camera
Dev BoardESP32-S3 development board with integrated camera and Wi-Fi HaLow (802.11ah) module for long-range wireless video transmission up to 1-2km at speeds up to 32 Mbps. Features USB-C, SD card slot, and Li
Heltec MeshPocket
Power BankQi2 magnetic wireless charging power bank with integrated Meshtastic mesh networking node, featuring nRF52840 BLE + SX1262 LoRa radio and a 2.13" e-ink display. Available in 5000mAh and 10000mAh confi
Heltec CubeCell AB01 Dev-Board (V2)
Dev BoardUltra-low power LoRa/LoRaWAN development board based on the ASR6502 SiP (ARM Cortex-M0+ @ 48MHz + SX1262), with USB-C, solar panel support, and 3.5uA deep sleep current. Ideal for remote environmental
Heltec ESP32-C3 Arduino Development Board
Dev BoardUltra-compact RISC-V development board with ESP32-C3FN4, WiFi, BLE 5.0, integrated battery management, and USB-C — ideal for low-power IoT sensor nodes and wireless prototyping.
Heltec CubeCell 1/2AA Node (HTCC-AB02A)
Ultra-low-power LoRa/LoRaWAN development node based on the ASR6502 SoC (ARM Cortex-M0+ @ 48MHz + SX1262), with a built-in 1/2AA battery holder, 3.5uA deep sleep, and Arduino compatibility. Ideal for r
Heltec WiFi Kit 32 (V3)
Dev BoardESP32-S3-based IoT development board with built-in 0.96" OLED display, lithium battery management, WiFi and Bluetooth 5.0 connectivity, and USB-C interface in a compact 50mm form factor.
Heltec CubeCell GPS-6502 (HTCC-AB02S)
LoRa + GPS development board based on ASR6502 SiP (ARM Cortex-M0+ with SX1262), featuring integrated AIR530Z GPS/BeiDou module, 0.96" OLED display, solar charging, and ultra-low 21uA deep sleep curren
Heltec HRI-485X
DTUIndustrial RS-485 wireless converter with ESP32, LoRa SX1262, Ethernet, and ESPHome support. Converts RS-485/Modbus serial data to LoRa, LoRaWAN, LTE, or Ethernet for long-range industrial IoT communi
Heltec HT-DE01 Multi Size E-Ink Drive Board
A compact universal e-ink driver board based on ESP32-S3FN8 with WiFi and Bluetooth connectivity, 24-pin FFC interface compatible with most e-ink displays, USB-C and LiPo battery support, and Arduino
Heltec Wireless Tracker V2
ESP32-S3 development board with SX1262 LoRa (28dBm), UC6580 dual-frequency GNSS, 0.96" TFT display, solar charging, and Meshtastic/MeshCore support for GPS tracking and mesh networking.
Heltec HT-CT62
moduleUltra-compact ESP32-C3 + SX1262 LoRa/LoRaWAN module with WiFi and BLE, designed for SMT integration into IoT devices. Features 10uA deep sleep, +21dBm TX power, and Meshtastic compatibility in a tiny
Heltec Wireless Bridge
Wireless BridgeESP32 + SX1276 LoRa multi-protocol bridge in an aluminum enclosure, converting between WiFi, Bluetooth, and LoRa with 8MB flash and 8MB PSRAM.
Heltec Wireless Tracker
ESP32-S3 development board with integrated SX1262 LoRa transceiver, UC6580 dual-frequency GNSS receiver, and 0.96-inch TFT display for IoT asset tracking, Meshtastic mesh networking, and LoRaWAN appli
Heltec HT-M00S Single Channel LoRa Gateway
Lorawan GatewayA compact, wall-mountable single-channel LoRaWAN gateway based on the HT-CT62 module (ESP32-C3 + SX1262). Designed for indoor use with a built-in PCB antenna, it can listen to over a dozen LoRa nodes
Heltec Capsule Sensor V3
Ultra-compact IP65 waterproof LoRa sensor capsule with ESP32-S3, SX1262 LoRa, GNSS, temperature/humidity, barometric pressure, and 3-axis accelerometer. Meshtastic-compatible with 250mAh battery and o
BeagleV-Fire
Single Board ComputerRISC-V + FPGA single board computer powered by Microchip PolarFire MPFS025T with 4x RV64GC U54 cores at 667MHz, 23K FPGA logic elements, 2GB LPDDR4, 16GB eMMC, Gigabit Ethernet, M.2 E-Key, and BeagleB
Heltec Wireless Stick V3
Compact ESP32-S3 development board with integrated SX1262 LoRa transceiver and 0.49-inch OLED display. Supports Meshtastic, LoRaWAN, WiFi, and BLE 5.0 in a breadboard-friendly form factor with battery
CubeCell AM01 Module V2 (HTCC-AM01)
moduleUltra-compact 18x18mm LoRa/LoRaWAN module based on the ASR6502 SiP with integrated ARM Cortex-M0+ MCU and Semtech SX1262 transceiver. Features 3.5uA deep sleep, Arduino compatibility, and CE/FCC certi
Heltec HRI-4853
DTUESP32-based RS-485 to Ethernet/LTE converter (DTU) with built-in web configuration, Modbus support, DIN-rail mounting, and ESPHome compatibility for industrial IoT and Home Assistant integration.
Heltec Vision Master E213
ESP32-S3 development board with 2.13-inch E-Paper display and optional SX1262 LoRa radio, supporting Meshtastic, LoRaWAN, Arduino, and MicroPython. Features WiFi, BLE 5.0, ultra-low 20uA deep sleep, l
Heltec Vision Master E290
ESP32-S3 development board with 2.9-inch e-ink display and optional SX1262 LoRa radio, featuring Raspberry Pi GPIO header, Meshtastic support, and 18uA deep sleep for battery-powered IoT and mesh netw
Heltec Wireless Paper
ESP32-S3 + SX1262 LoRa E-Ink development board with 2.13" e-paper display, WiFi, BLE 5.0, and LoRa connectivity. Designed for electronic shelf labels, Meshtastic mesh nodes, and low-power IoT sensor d
Heltec HT-M2802 Indoor LoRa Gateway
Indoor edge computing LoRaWAN gateway with Rockchip RK3566 quad-core Cortex-A55 processor, SX1303+SX1250 8-channel LoRa radio, 2GB DDR4, 32GB eMMC, Gigabit Ethernet, dual-band WiFi, Bluetooth 4.0, and
Heltec Mesh Node T114
Compact nRF52840 + SX1262 LoRa development board with BLE 5.0, optional 1.14" TFT display and L76K GPS module. Designed for Meshtastic mesh networking, LoRaWAN, and battery-powered IoT deployments wit
Heltec HT-M02 Edge LoRa Gateway (V2)
Lorawan GatewayIP66 waterproof edge computing LoRaWAN gateway with Rockchip RK3566 quad-core Cortex-A55 SoC, SX1303+SX1250 8-channel LoRa concentrator, 2GB DDR4, 32GB eMMC, pre-installed Debian Linux with Docker, an
CubeCell Dev-Board Plus (HTCC-AB02)
Heltec CubeCell HTCC-AB02 is an ultra-low-power LoRa/LoRaWAN development board based on the ASR6502 SoC (ARM Cortex-M0+ with integrated SX1262), featuring a 0.96" OLED display, solar panel input, and
Heltec Turtle Board
Ultra-low-power LoRa development board with STM32L432KC ARM Cortex-M4 MCU and SX1276 transceiver, capable of 10-year battery life on AAA cells using the RadioShuttle peer-to-peer protocol.
BeagleBone AI-64
Single Board ComputerPowerful open-source AI/ML single board computer featuring TI TDA4VM SoC with dual Arm Cortex-A72 at 2.0 GHz, 8 TOPS deep-learning accelerator, C7x DSP, 4GB LPDDR4, 16GB eMMC, USB 3.0, Gigabit Etherne
BeagleBone Black
Single Board ComputerLow-cost, community-supported ARM Cortex-A8 development platform with 512MB DDR3L, 4GB eMMC, HDMI, USB, 10/100M Ethernet, 2x PRUs, and expandable via BeagleBone capes. Boots Linux in under 10 seconds.
BeagleBone Black Industrial
Single Board ComputerIndustrial-rated BeagleBone Black with extended temperature range (-40°C to +85°C), TI Sitara AM3358 ARM Cortex-A8 at 1 GHz, full cape and software compatibility, for harsh environment deployments.
Arduino Nano ESP32
Dev BoardArduino Nano form factor powered by ESP32-S3 with WiFi 802.11 b/g/n, Bluetooth LE 5.0, dual-core Xtensa LX7 at 240MHz, 8MB flash, 512KB SRAM, USB-C, and HID support — Arduino's compact IoT powerhouse
Arduino GIGA R1 WiFi
Dev BoardArduino's most powerful board — dual-core STM32H747XI with Cortex-M7 at 480MHz + Cortex-M4 at 240MHz, 2MB flash, 1MB RAM, WiFi, Bluetooth, 76 GPIO, USB-A + USB-C, 3.5mm audio jack, camera connector, a
Arduino Nano 33 BLE Sense Rev2
Dev BoardSensor-packed Nano board with nRF52840 ARM Cortex-M4F at 64MHz, BLE 5.0, 9-axis IMU, microphone, temperature, humidity, pressure, light, and gesture sensors — designed for TinyML and edge AI projects
Arduino Nano RP2040 Connect
Dev BoardNano form factor board with RP2040 dual-core Cortex-M0+ at 133MHz, 16MB flash, 264KB SRAM, WiFi 802.11 b/g/n and BLE via u-blox NINA-W102, built-in 6-axis IMU and microphone, 22 digital I/O with 20 PW
Arduino Stella
Dev BoardArduino's Ultra-Wideband (UWB) board with nRF52840 ARM Cortex-M4F, Truesense DCU040 UWB module, BLE 5.0, and NFC — enabling centimeter-accurate indoor positioning, asset tracking, and secure proximity
Arduino MKR WAN 1310
Dev BoardLoRa-enabled IoT board with SAMD21 ARM Cortex-M0+ at 48MHz, Murata CMWX1ZZABZ LoRa module, ECC508 crypto chip, 2MB SPI flash, onboard LiPo charger, and 104\u00b5A low-power mode — designed for long-ra
Arduino Portenta C33
Compute ModuleCost-effective Portenta module with Renesas RA6M5 ARM Cortex-M33 at 200MHz, 2MB flash, 512KB SRAM, WiFi/BLE, hardware security, and Portenta/MKR compatibility — bringing industrial IoT capabilities at
Arduino Nicla Voice
moduleTiny 22.86mm AI voice module with nRF52840 BLE 5.0, Syntiant NDP120 neural decision processor, MEMS microphone, 6-axis IMU, and magnetometer — runs always-on voice recognition and audio anomaly detect
Arduino Nicla Vision
moduleTiny 22.86mm AI vision module with STM32H747 dual-core Cortex-M7/M4, 2MP camera, WiFi/BLE, 6-axis IMU, microphone, and time-of-flight sensor — runs TinyML image recognition and OpenMV/MicroPython at t
Arduino Nicla Sense ME
moduleCompact 22.86mm sensor module with nRF52840 BLE 5.0 and four Bosch sensors — 9-axis IMU with AI, barometric pressure, temperature/humidity, and gas/CO2 detection. Edge AI-powered environmental and mot
Arduino Opta WiFi
Industrial ControllerIndustrial micro PLC with STM32H747 dual-core Cortex-M7/M4, WiFi, BLE, Ethernet, 4\u00d72.3kW relays, Modbus TCP/RTU, hardware security, DIN rail mount, and IEC 61131-3 PLC programming — co-developed
NanoPi R2S
sbcBudget dual-GbE router board with RK3328 quad-core Cortex-A53 at 1.3GHz, 1GB DDR4, native + USB 3.0 Gigabit Ethernet, and USB-C power — the most affordable open-source OpenWrt router platform at just
Arduino Opta Lite
Industrial ControllerEntry-level industrial micro PLC with STM32H747 dual-core Cortex-M7/M4, Ethernet, 4\u00d72.3kW relays, Modbus TCP, hardware security, DIN rail mount, and IEC 61131-3 PLC programming — the affordable p
NanoPC-T6 Plus
sbcFriendlyElec's flagship RK3588 SBC with 4x Cortex-A76 + 4x Cortex-A53 at 2.4GHz, up to 32GB LPDDR5, NVMe M.2, dual 2.5GbE, dual HDMI out + HDMI in, 6 TOPS NPU, 8K video, 40-pin GPIO, and USB-C PD powe
NanoPi R6S
sbcHigh-performance RK3588S router board with 8GB LPDDR4X, 32GB eMMC, native Gigabit + dual 2.5GbE, HDMI 2.1 (8K), USB 3.0, and 6 TOPS NPU — ideal for OpenWrt/FriendlyWrt router, NAS, and edge computing.
NanoPi M5
sbcMid-range RK3576 SBC with 4x Cortex-A72 + 4x Cortex-A53 at 2.2GHz, up to 8GB RAM, dual Gigabit Ethernet, M.2 NVMe, HDMI 4K, 6 TOPS NPU, MIPI-CSI/DSI, 30-pin GPIO, and USB-C PD in a compact 90×62mm for
NanoPi R4S
sbcPopular RK3399 dual-GbE router board with 2x Cortex-A72 + 4x Cortex-A53, 4GB LPDDR4, dual Gigabit Ethernet, 2x USB 3.0, metal case option, and OpenWrt/FriendlyWrt support — the go-to affordable open-s
BigTreeTech SKR Pro V1.1
3D Printer Control Board32-bit 3D printer control board powered by STM32F407ZGT6 @ 168MHz. Supports 6 stepper drivers, triple extruder, dual Z, 12–24V input. Compatible with Marlin and Klipper firmware.
NanoPi Zero2
sbcUltra-compact 45\u00d745mm Linux SBC with RK3528A quad-core Cortex-A53 at 1.8GHz, up to 2GB RAM, Gigabit Ethernet, M.2 WiFi slot, USB 2.0, 30-pin GPIO, and 4K HDMI — starting at just $18.
BigTreeTech SKR V1.4 Turbo
3D Printer Control Board32-bit 3D printer control board with LPC1769 @ 120MHz. Supports 5 stepper driver sockets, dual Z, 12–24V, TMC2209 UART. Popular Marlin and Klipper compatible upgrade board.
BigTreeTech SKR Mini E3 V1.2
3D Printer Control BoardUltra-quiet 32-bit 3D printer board with 4 integrated TMC2209 UART stepper drivers. STM32F103RCT6 @ 72MHz. Direct drop-in replacement for Ender 3. Supports Marlin and Klipper.
BigTreeTech Octopus Pro V1.1
3D Printer Control BoardHigh-voltage 3D printer control board with STM32H723ZE MCU, 8 stepper driver slots supporting up to 60V motor power, CAN bus, PT100/PT1000 support, and Marlin/Klipper/RRF firmware.
BigTreeTech Octopus Max EZ V1.0
3D Printer Control BoardHigh-end 32-bit 3D printer control board with STM32H723ZET6 MCU at 550MHz, 10 EZ-socket stepper driver slots, CAN bus, eFuse protection, and Marlin/Klipper firmware support.
BigTreeTech SKR Mini E3 V2.0
3D Printer Control BoardImproved 32-bit control board with 4 integrated TMC2209 UART drivers, dual Z ports, and STM32F103RCT6 @ 72MHz. Drop-in upgrade for Ender 3, CR-10S, Ender 5. Marlin and Klipper ready.
BigTreeTech SKR Mini E3 V3.0
3D Printer Control BoardLatest 32-bit SKR Mini E3 with STM32G0B1RET6 @ 64MHz, 4 integrated TMC2209 UART drivers, USB-C, and CAN bus support. Compact Ender 3 drop-in upgrade. Marlin and Klipper compatible.
NanoPi R5S-LTS
sbcRK3568B2 router board with quad-core Cortex-A55 at 2.0GHz, up to 4GB RAM, 32GB eMMC, native GbE + dual 2.5GbE, M.2 PCIe, 2x USB 3.0, HDMI 4K, and USB-C PD — the mid-range OpenWrt router with long-term
BigTreeTech BTT Pi V1.2
Single Board ComputerSingle board computer by BigTreeTech with Allwinner H616 quad-core Cortex-A53, 1GB DDR3L RAM, WiFi, 100Mbps Ethernet, and 40-pin GPIO. Drop-in Raspberry Pi CM4 alternative for Klipper 3D printing.
BigTreeTech Manta M8P V1.1
3D Printer Control Board8-axis Klipper-native 3D printer control board with STM32G0B1VET6 MCU, BTB connector for CM4/CB1, CAN bus, eFuse protection, Ethernet, and selectable CNC fan voltage.
BigTreeTech SKR Pico V1.0
3D Printer Control BoardCompact 32-bit 3D printer control board powered by RP2040 @ 133MHz. Designed for Voron 0.1 and small printers. 4 TMC2209 sockets, USB-C, 12–24V input. Klipper and Marlin compatible.
NanoPi R5C
sbcCompact dual 2.5GbE router with RK3568B2 quad-core Cortex-A55 at 2.0GHz, up to 4GB RAM, dual USB 3.2, HDMI, M.2, and 0.8 TOPS NPU in a tiny 58\u00d758mm form factor — the small-footprint 2.5G OpenWrt
NanoPi R6C
sbcRK3588S router board with 4x Cortex-A76 + 4x Cortex-A53, up to 8GB RAM, 32GB eMMC, native GbE + 2.5GbE, M.2 NVMe, HDMI 8K, 6 TOPS NPU, and USB-C PD — the mid-range RK3588S router with NVMe storage sup
BigTreeTech CB2
Single Board ComputerCompute module by BigTreeTech powered by Rockchip RK3566 quad-core Cortex-A55 at 1.8GHz, 2GB/4GB LPDDR4, 32GB eMMC, Gigabit Ethernet, WiFi 5 (802.11ac), and Bluetooth 5.2. CM4-form-factor.
Milk-V Pioneer
mATX Motherboard64-core RISC-V workstation mATX motherboard with SOPHON SG2042 @ 2GHz, up to 128GB DDR4 ECC, PCIe 4.0 x16, 5x SATA, 8x USB 3.0, dual 2.5GbE for native RISC-V development.
BigTreeTech SKR 3
3D Printer Control BoardHigh-performance 32-bit 3D printer board with STM32H743VI @ 480MHz, 5 driver slots, CAN bus, FDCAN, WiFi module support, 12–24V, 10A bed output. Marlin, Klipper, and RepRapFirmware compatible.
BigTreeTech Octopus V1.1
3D Printer Control Board32-bit 3D printer control board with STM32F446ZET6 MCU, 8 stepper driver slots (9 outputs), CAN bus via RJ11, USB-C, WiFi header, and support for Marlin and Klipper firmware.
NanoPC-T6 LTS
sbcLong-term support RK3588 SBC with 4x Cortex-A76 + 4x Cortex-A53 at 2.4GHz, up to 16GB LPDDR4X, NVMe PCIe 3.0 x4, dual 2.5GbE, dual HDMI, MIPI-CSI/DSI, 6 TOPS NPU, and 40-pin GPIO — the LTS variant for
BigTreeTech SKR 3 EZ
3D Printer Control BoardAdvanced 32-bit 3D printer board with STM32H743VI @ 480MHz and EZ driver system (tool-free). 5 EZ driver slots, CAN/FDCAN, WiFi module support, 10A bed, 12–24V. Marlin, Klipper, RRF ready.
BigTreeTech PAD 7
Single Board Computer7-inch all-in-one 3D printer control panel with 1024x600 IPS touchscreen, pre-installed CB1 core board running Klipper, Ethernet, WiFi, 3x USB 2.0, CAN bus, and built-in speaker.
NanoPi M6
sbcRK3588S SBC with 4x Cortex-A76 + 4x Cortex-A53 at 2.4GHz, up to 32GB LPDDR5, M.2 NVMe, Gigabit Ethernet, HDMI 2.1 (8K), dual MIPI-DSI/CSI, 6 TOPS NPU, and USB-C PD — FriendlyElec's compact RK3588S des
BigTreeTech Manta M4P V1.0
3D Printer Control BoardKlipper-native 3D printer control board with STM32G0B0RE MCU and BTB connector for Raspberry Pi CM4 or BTT CB1, 4 stepper driver slots, Ethernet, USB-C, and CAN bus support.
NanoPi R2S Plus
sbcEnhanced RK3328 dual-GbE router with quad-core Cortex-A53 at 1.4GHz, 1GB DDR4, 32GB eMMC onboard, dual Gigabit Ethernet, optional WiFi, and metal case — the R2S upgrade with built-in storage for relia
BigTreeTech Manta E3EZ V1.0
3D Printer Control BoardKlipper-ready 3D printer control board for Ender 3/5 with STM32G0B1 MCU, BTB connector for CM4/CB1, 5 EZ stepper slots, CAN bus, and direct Ender 3 compatibility.
BigTreeTech SKRat V1.0
3D Printer Control BoardCompact 32-bit 3D printer control board with STM32G0B1VET6 MCU, 5 stepper driver slots, CAN-FD bus, USB-C, and support for both Marlin and Klipper firmware.
BigTreeTech ESP8266 WiFi Module
Wireless ModuleESP8266-based WiFi transceiver expansion module for BTT 3D printer control boards. Available in ESP12S and ESP-07 variants, enabling wireless connectivity and remote control via serial UART.
BigTreeTech HDMI5 V1.0
Display5-inch 800x480 IPS HDMI capacitive touchscreen display. Compatible with Raspberry Pi, BTT SBCs, and any HDMI source. USB-C data port, 3.5mm audio jack, 5-point touch, auto-driver on PC.
Milk-V Duo
SBCUltra-compact RISC-V dev board with dual-core CV1800B SoC, 64MB RAM, 0.5 TOPS TPU, running Linux and RTOS simultaneously. Just 21x51mm, starting at $5.
CompuLab IOT-GATE-IMX8PLUS
IoT ControllerIndustrial IoT edge gateway with NXP i.MX8M Plus quad-core Cortex-A53 at 1.8GHz, up to 8GB RAM, dual Ethernet (PoE), WiFi/BT, optional 4G LTE, 3x RS485/RS232, USB 3.0, TPM, and modular I/O expansion —
BigTreeTech S42C V1.0 Closed Loop Stepper Driver
Motor DriverNEMA 17 (42mm) stepper motor closed-loop driver board with OLED display. Uses encoder feedback to eliminate missed steps and improve high-speed 3D printer and CNC motor performance.
BigTreeTech EBB 36/42 CAN Bus Toolhead Board
Toolhead BoardCAN bus toolhead board for 36/42mm stepper extruders. Features STM32G0B1 MCU, onboard TMC2209, ADXL345 accelerometer, PT100/PT1000 support, and USB/CAN connectivity for Klipper 3D printers.
CompuLab IOT-DIN-IMX8PLUS
Industrial ControllerDIN-rail industrial IoT gateway with NXP i.MX8M Plus quad-core Cortex-A53 at 1.8GHz, up to 8GB RAM, dual LAN, CAN bus, RS485/RS232, optional LTE, stackable I/O modules (up to 12x serial, 32x DI/DO, AD
BigTreeTech ADXL345 V2.0 Accelerometer Board
Sensor ModuleRP2040-based ADXL345 accelerometer board for Klipper input shaping and resonance compensation on 3D printers. Connects via USB Type-C with ESD protection. Board size: 33.25 × 15.5mm.
BigTreeTech EBB SB2209 CAN Toolhead Board (RP2040)
Toolhead BoardToolhead board designed for the Voron StealthBurner. Powered by RP2040, supports CAN and USB, includes TMC2209, ADXL345 accelerometer, and PT100/PT1000 for Klipper 3D printers.
BigTreeTech MMB CAN V2.0 Multi-Material Control Board
Expansion BoardCAN bus control board for the Enraged Rabbit Carrot Feeder (ERCF) multi-material system. Features STM32G0B1 MCU, 4 EZ stepper driver slots, USB/CAN connectivity, and full Klipper support.
BigTreeTech BTT RRF WiFi V1.0 Module
Wireless ModuleESP8266-based WiFi expansion module for RepRapFirmware (Duet-style) boards. Adds wireless connectivity to BTT SKR V1.3, SKR V1.4 Turbo, and compatible boards running RRF or Marlin firmware.
BigTreeTech Eddy Eddy Current Inductive Probe
Expansion BoardEddy current inductive bed leveling probe for Klipper 3D printers. Offers 0.5μm precision, rapid bed mesh scanning, temperature compensation (USB), and works as Z-endstop. Mounts on standard Voron X c
BigTreeTech Panda PWR
Power ModuleIntelligent power management module with ESP8684 MCU, 4MB flash, 2.4GHz WiFi, and dual USB outputs. Enables remote power control, consumption monitoring, countdown shutdown, and Home Assistant integra
BigTreeTech HBB Handheld Button Board
Expansion BoardRP2040-based handheld button board with 7 mechanical switches and RGB NeoPixel LEDs for manual control of Klipper 3D printers. Triggers homing, heating, motor disable and other macros via USB.
BigTreeTech Rodent V1.0
Cnc ControllerESP32-based CNC controller board co-developed with RatRig, featuring 4x TMC2160 drivers (up to 56V/4.7A RMS), FluidNC firmware, WiFi, RS-485, CAN, USB-C, and OLED display support for engraving machine
Milk-V Jupiter
Mini ITXMini-ITX RISC-V board with octa-core SpacemiT K1, up to 16GB LPDDR4X, 2 TOPS AI, WiFi 6/BT 5.2, dual Gigabit Ethernet, PCIe x8 slot. First RVA22 RISC-V PC board.
Libre Computer Alta
Single Board ComputerLibre Computer Alta (AML-A311D-CC) — Amlogic A311D hexa-core SBC with 4GB LPDDR4, 5 TOPS NPU, Mali-G52 GPU, 4× USB 3.0, Gigabit Ethernet with PoE, and 4K HDR HDMI 2.0 in a Pi-compatible form factor.
Libre Computer Renegade Elite
Single Board ComputerLibre Computer Renegade Elite (ROC-RK3399-PC) — Rockchip RK3399 SBC with dual Cortex-A72 + quad Cortex-A53, 4GB LPDDR4, M.2 PCIe, DisplayPort 1.2, HDMI 2.0, and UEFI BIOS in a 120×72mm form factor.
Libre Computer Solitude
Single Board ComputerLibre Computer Solitude (AML-S905D3-CC) — Amlogic S905D3 quad-core Cortex-A55 SBC with 2/4GB LPDDR4, 1.2 TOPS NPU, 4× USB 3.0, Gigabit Ethernet with PoE, and 4K HDR HDMI 2.0 in a Pi-compatible layout.
Milk-V Mars
SBCCredit card-sized RISC-V SBC with quad-core StarFive JH7110 @ 1.5GHz, up to 8GB LPDDR4, Gigabit Ethernet with PoE, 40-pin GPIO, 4K HDMI. Raspberry Pi form factor.
Milk-V Duo S
SBCCompact RISC-V/ARM dev board with SG2000 SoC, 512MB RAM, optional WiFi 6/BT5, dual MIPI CSI cameras, 0.5 TOPS TPU. Runs Linux and RTOS simultaneously.
Milk-V Meles
SBCRISC-V SBC with quad-core T-Head TH1520 @ 1.85GHz, up to 16GB LPDDR4X, 4 TOPS NPU, WiFi 5/BT 5.2, 4K HDMI, Vulkan GPU. Credit card-sized form factor.
Milk-V Jupiter2
SBCFirst RVA23-compliant RISC-V SBC with octa-core SpacemiT K3 @ 2.4GHz, up to 32GB LPDDR5, 60 TOPS AI accelerator, WiFi 6/BT 5.2, 10GbE SFP+, real-time processor.
Milk-V Megrez
Mini ITXMini-ITX RISC-V board with quad-core SiFive P550 @ 1.8GHz (ESWIN EIC7700X), up to 32GB LPDDR5, 19.95 TOPS NPU, 8K video codec, PCIe x8 slot, SATA3.
Milk-V Titan
Mini ITXMini-ITX RISC-V board with octa-core UltraRISC UR-DP1000 @ 2GHz, up to 64GB DDR4 ECC, PCIe Gen4 x16, onboard BMC, hardware virtualization. RVA22 compliant, FCC/CE certified.
Get notified when new devices are added.
More to explore — popular traits shared by devices with GPIO Voltage: 3.3V.