Industrial Automation

LILYGO T-Micro32 Plus is an upgraded compact ESP32 module with 8MB flash, 2MB PSRAM, expanded GPIO, and an improved RED C3 ceramic antenna for stronger wireless performance.

ESP32 development board with integrated CAN bus and RS-485 transceivers, TF card, WiFi, and BLE for industrial IoT, Modbus, and automotive OBD-II applications with 5–12V wide-range power input.

ESP32-S3 board with 6 onboard relays, 16MB flash, 8MB PSRAM, WiFi, and BLE for ESPHome smart home automation, controlling lights, appliances, and HVAC systems.

LILYGO T-Micro32 V2.0 is a 45%-smaller ESP32 PICO-D4 module with integrated IPEX antenna connector, designed for space-constrained embedded product designs.

ESP32-S3 industrial communication board with three RS485 ports and one CAN bus — enables multi-protocol data switching for automation, sensor networks, and legacy equipment integration.

ESP32-S3 three-board stack with SX1262 LoRa, CAN, RS485, RS232, Ethernet (W5500), relay, capacitive touch LCD, and DC input — a versatile industrial IoT gateway with long-range wireless.

LILYGO T-2CAN is an ESP32-S3 development board featuring dual CAN bus interfaces via two TWAI controllers, Wi-Fi, Bluetooth 5 LE, and wide DC input range for automotive and industrial applications.

ESP32-WROVER-E development board with LAN8720 Ethernet, IEEE 802.3 af/at Power over Ethernet (5V@4A, 44–57V input), 16MB flash, 8MB PSRAM, WiFi, BLE 4.2, and expandable LCD interface for wired IoT gat

ESP32-WROVER-E development board with 8 optocoupler-isolated 5V relay channels (HRS4H-S-DC5V), Wi-Fi, BLE 4.2, 8MB PSRAM, and support for DC 12–24V power input for industrial automation.

ESP32-S3 industrial communication board with isolated RS-232 and RS-485 modules (3000V isolation), 7–24V DC input via DB9 connector, Wi-Fi, and Bluetooth 5 LE for Modbus and industrial serial networki

ESP32-S3-based DMX512 lighting programming controller with dual-core architecture, 8 optically isolated inputs, RS485, relay output, WiFi/Bluetooth, and DIN-rail mounting in an alloy steel enclosure.

Pocket-sized x86 single board computer with Intel Celeron N5105 quad-core, 8GB LPDDR4 RAM, 64GB eMMC, Wi-Fi 6, 2.5GbE, triple display output, and an integrated Arduino Leonardo co-processor.

Palm-sized x86 SBC with Intel N150 quad-core (up to 3.6GHz), 16GB LPDDR5, 128GB eMMC, RP2040 co-processor, Gigabit Ethernet, HDMI 2.1, and Windows 11 IoT Enterprise — in the classic LattePanda V1 form

Card-sized x86 compute module with Intel N100 quad-core (up to 3.4GHz), 8GB LPDDR5, 64GB eMMC, 9 PCIe 3.0 lanes, triple display output, and open-source KiCAD carrier board design for custom embedded s

Card-sized x86 compute module with Intel Core i3-N305 8-core (up to 3.8GHz), 16GB LPDDR5, 64GB eMMC, 9 PCIe 3.0 lanes, triple display output, and open-source KiCAD carrier board design.

High-performance AI SBC with 10 TOPS NPU, octa-core ARM Cortex-A55, 8GB LPDDR4, WiFi 6, 4x USB 3.0, dual MIPI CSI, CAN FD, and ROS2 support for advanced robotics.

Arduino Leonardo-compatible IoT board with WIZnet W5500 hardwired TCP/IP Ethernet (10/100Mbps), 802.3af PoE power input, ATmega32u4 MCU, 20 digital I/O pins, and 6 analog inputs for wired IoT applicat

Industrial DIN-rail RP2350B controller with 8-channel relay outputs (10A/250VAC), 8 optocoupler-isolated digital inputs, W5500 Ethernet (optional PoE), isolated RS485, RTC, microSD, and 7-36V wide-vol

Pico-compatible development board with RP2350A MCU, onboard CAN V2.0B bus interface (XL2515 controller + SIT65HVD230DR transceiver), 4MB flash, 26 GPIO pins, castellated module design, and USB-C conne

Full-featured industrial carrier board for TQ-Systems TQMa8MPxL SOM with NXP i.MX 8M Plus, 4GB LPDDR4, 16GB eMMC, PCIe, SATA, dual Gigabit Ethernet, and 12V DC supply, designed for demanding industria

Industrial ESP32-S3 controller with 8-channel optocoupler-isolated digital inputs (5-36V), 8-channel Darlington outputs (500mA each), PoE Ethernet (W5500), isolated RS-485 and CAN bus, RTC, and DIN ra

Open-source hardware evaluation board with ESP32-C6, 4 mains-rated relays, 4 opto-isolated inputs, and WiFi 6/Thread/Zigbee/Matter connectivity for home and industrial automation.

Industrial carrier board for TQ-Systems TQMa8MPxL SOM, featuring NXP i.MX 8M Plus with quad-core Cortex-A53 + Cortex-M7, up to 4GB LPDDR4, 16GB eMMC, Gigabit Ethernet, WiFi 5, USB 3.0, and 12V DC inpu

ESP32-S3 industrial PLC controller with 1.14" IPS LCD, 4 relays, 8 opto-isolated inputs, RS-485, CAN bus, INA226 power monitor, RTC, buzzer, microSD, and DIN-rail mounting in a compact enclosure.

Chinese Linux SBC by Phytium Technology featuring the domestic E2000Q quad-core Cortex-A55 compatible processor, up to 8GB DDR4, 32GB eMMC, Gigabit Ethernet, USB 3.0, and 12V DC, running Armbian for e

Texas Instruments AM62x Sitara low-power evaluation board with quad-core Cortex-A53, 1GB LPDDR4, microSD, 100Mbps Ethernet, USB-C, and 5V USB-C power — the LP variant optimized for ultra-low-power HMI

Texas Instruments AM62x Sitara SiP ultra-compact evaluation board with 512MB LPDDR4 integrated in-package, microSD, 100Mbps Ethernet, USB-C, and 5V power — the smallest AM62 evaluation platform for sp

Texas Instruments AM62P Sitara vision-enabled evaluation board with quad-core Cortex-A53 @ 1.4GHz, vision DSP, 4GB LPDDR4, dual Gigabit Ethernet, M.2 WiFi, microSD, and 5V USB-C power for machine visi

Texas Instruments SK-AM64B Starter Kit — dual Cortex-A53 + quad Cortex-R5F industrial evaluation board for automation, motor control, and time-sensitive networking.

High-speed Feather-form-factor dev board with STM32F405 ARM Cortex-M4F @ 168MHz, 1MB Flash, 192KB RAM, 2MB SPI Flash, USB-C, STEMMA QT, SD card socket, and LiPo charging. Adafruit's fastest CircuitPyt

The Netduino Plus is an open-source .NET Micro Framework microcontroller board with built-in Ethernet, Arduino-compatible pinout, and microSD slot — enabling C# development for connected embedded proj

The Netduino 3 is an open-source .NET Micro Framework development board powered by the STM32F427VG ARM Cortex-M4 at 168MHz, featuring Arduino shield compatibility, 3 GOBUS ports, and 6 analog input ch

The PIC32 Pinguino is an open-source Arduino-form-factor development board based on the Microchip PIC32MX440F256H 32-bit processor at 80MHz, with industrial-grade power input, LiPo battery support, an

The Netduino Plus 2 is an Arduino R3-compatible .NET Micro Framework development board with a 168MHz ARM Cortex-M4 processor, built-in Ethernet, microSD slot, and 12-bit ADC — offering C# programming

High-performance microcontroller with NXP i.MX RT1062 ARM Cortex-M7 @ 600MHz, 1MB RAM, 2MB Flash, 100Mbps Ethernet PHY, SD card, 55 GPIO, dual 480Mbps USB, and 3 CAN Bus. Expanded Teensy 4.0 sibling.

The Netduino 3 Ethernet is a .NET Micro Framework board with an STM32F427VI ARM Cortex-M4 at 168MHz, wired Ethernet with full TCP/IP stack, microSD storage, Arduino shield compatibility, and 3 GOBUS p

CAN-bus-capable Feather with ATSAME51J19 ARM Cortex-M4F @ 120MHz, built-in CAN transceiver + 5V booster, USB-C, 21 GPIO, 2MB SPI Flash, dual DAC, and LiPo charging. Ideal for automotive and industrial

The Raspberry Pi Compute Module 3+ is a SODIMM-form-factor system-on-module with the BCM2837B0 quad-core Cortex-A53 at 1.2GHz, 1GB LPDDR2 RAM, and eMMC storage variants of 8GB, 16GB, 32GB, or the stor

Industrial-grade embedded computer module with BCM2711 quad-core Cortex-A72 @ 1.5GHz, 1–8GB LPDDR4 RAM, optional 8–32GB eMMC and optional dual-band WiFi + Bluetooth 5.0. Available in 32 hardware varia

Official reference carrier board for the Raspberry Pi Compute Module 4. Exposes dual HDMI 2.0, Gigabit Ethernet, 2× USB 2.0, PCIe x1, dual camera/display FPC, microSD slot (for CM4 Lite), RTC, HAT hea

The DC Boarduino is a slim, breadboard-friendly Arduino-compatible development board based on the ATmega328 at 16MHz, with a 2.1mm DC barrel jack for 7–17V input, USB-TTL serial header, ICSP programmi

The Arduino Mega R3 ADK is an ATmega2560-based development board with 54 digital I/O, 16 analog inputs, 4 hardware UARTs, and a USB Type-A host port (Android ADK) with a power boost converter — design

Industrial-grade Linux SoM with NXP i.MX 8M Mini quad-core Cortex-A53 at 1.8GHz + STM32H747 dual-core Cortex-M7/M4, 2GB RAM, WiFi/BLE, NXP SE050 hardware security, Docker containers, and OTA updates f

Industrial-rated BeagleBone Black with extended temperature range (-40°C to +85°C), TI Sitara AM3358 ARM Cortex-A8 at 1 GHz, full cape and software compatibility, for harsh environment deployments.

Industrial micro PLC with STM32H747 dual-core Cortex-M7/M4, WiFi, BLE, Ethernet, 4\u00d72.3kW relays, Modbus TCP/RTU, hardware security, DIN rail mount, and IEC 61131-3 PLC programming — co-developed

Entry-level industrial micro PLC with STM32H747 dual-core Cortex-M7/M4, Ethernet, 4\u00d72.3kW relays, Modbus TCP, hardware security, DIN rail mount, and IEC 61131-3 PLC programming — the affordable p

Industrial IoT edge gateway with NXP i.MX8M Plus quad-core Cortex-A53 at 1.8GHz, up to 8GB RAM, dual Ethernet (PoE), WiFi/BT, optional 4G LTE, 3x RS485/RS232, USB 3.0, TPM, and modular I/O expansion —

DIN-rail industrial IoT gateway with NXP i.MX8M Plus quad-core Cortex-A53 at 1.8GHz, up to 8GB RAM, dual LAN, CAN bus, RS485/RS232, optional LTE, stackable I/O modules (up to 12x serial, 32x DI/DO, AD