512KB SRAM

ESP32-S3 handheld dev board with QWERTY keyboard, trackball, 2.8" IPS LCD, LoRa SX1262, GPS, speaker, dual microphones, and 2000mAh battery in an ABS case.

A pocket-sized ESP32-S3 development board with a 4.7-inch capacitive touchscreen e-paper display (960×540, 16 grayscale), anti-glare glass, warm-toned backlight, MagSafe wireless charging, and compreh

Open-source ESP32-S3 smartwatch with LoRa, 1.3" 240×240 IPS touchscreen, haptic feedback, accelerometer, speaker, microphone, IR transmitter, and 1500mAh battery. Supports Meshtastic, ESPHome, Arduino

Ultra-compact ESP32-S3 board with a 0.85-inch GC9107 IPS display (128×128), 2MB PSRAM, WiFi, BLE 5.0, and USB-C — one of the smallest ESP32-S3 development boards available.

ESP32-S3 development board with 1.9-inch ST7789V TFT display (170×320), optional capacitive touch, 16MB flash, 8MB PSRAM, and USB-C. Popular for smart displays and IoT dashboards.

ESP32-S3 board with 1.91-inch RM67162 AMOLED display (240×536), optional touch, 16MB flash, 8MB PSRAM, and USB-C — delivering vivid OLED visuals for IoT dashboards and smart displays.

ESP32-S3 USB-A dongle with a 0.96-inch ST7735 color display (80×160), 16MB flash, WiFi, and BLE 5.0 — a compact plug-in development stick for IoT, media, and wireless sensor nodes.

ESP32-S3 all-in-one media board with 1.9-inch TFT display, rotary encoder, dual microphones, 1W speaker, 7 RGB LEDs, GROVE connector, and LiPo battery support — ideal for audio players and interactive

ESP32-S3 board with a circular 2.1\" or 2.8\" ST7701S RGB display (480×480) and capacitive touch — perfect for smart home controllers, round-display clocks, and interactive dashboards.

ESP32-S3 camera development board with OV2640 2MP sensor, 0.96-inch OLED display, 16MB flash, 8MB PSRAM, WiFi, and BLE 5.0 — a ready-to-use platform for WiFi streaming cameras and computer vision proj

nRF52840 + SX1262 LoRa + L76K GPS all-in-one board with 1.54-inch e-paper display, 850mAh battery, Thread, Zigbee, and BLE 5.0 — runs Meshtastic, SoftRF, and custom NRF firmware out of the box.

ESP32-S3 handheld terminal with 2.8-inch IPS display, mini QWERTY keyboard, trackball, optional SX1262 LoRa, speaker, and microphone — a self-contained portable communicator running Meshtastic and Mes

ESP32-S3 HMI development board with a 2.8-inch resistive touchscreen, GROVE connectors, 16MB flash, 8MB PSRAM, and USB-C — designed for industrial HMI panels and interactive control interfaces.

Compact ESP32-S3 development board with wired Ethernet (W5500 SPI), WiFi, BLE, microSD slot, and optional PoE and camera shields for reliable networked IoT edge nodes.

Premium ESP32-S3 smartwatch development platform with 2.06" AMOLED touchscreen, LoRa SX1262, GNSS, NFC, MAX98357A audio, DRV2605 haptic, AXP2101 PMIC, and 1100mAh battery.

Wearable ESP32-S3 development board with 1.1" full-color AMOLED display in a glasses prism form factor, microphone, RTC, and touch button for head-up display applications.

ESP32-S3 development board with WiFi HaLow (802.11ah) sub-GHz radio for long-range IoT deployments, plus standard 2.4GHz WiFi, BLE 5.0, microSD, and 18650 battery support.

Upgraded T-Display S3 with a larger 2.33" IPS touchscreen, ESP32-S3R8, OTG charging via SY6970, QWIIC ports, ambient light/proximity sensor, and optional camera module expansion via POGOpin.

ESP32-S3 walkie-talkie development board with SA868 UHF/VHF radio module, 0.96" OLED display, rotary encoder, WiFi, BLE, and 18650 battery support for two-way radio projects.

Upgraded T-Beam with ESP32-S3FN8, QMI8658 6-axis IMU, LoRa SX1262, dual GPS options (L76K or u-blox), SoftRF firmware support, and multi-frequency bands for Meshtastic and aircraft tracking.

Compact LoRa pager with ESP32-S3, 2.33" touchscreen, QWERTY keyboard, u-blox GNSS, BHI260AP AI IMU, ES8311 audio codec, RFID/NFC, and foldable antenna for off-grid messaging.

ESP32-S3 smartwatch dev board with LoRa SX1262, GNSS, BMA423 accelerometer, MAX98357A audio, DRV2605 haptic feedback, AXP2101 PMIC, and 940mAh battery for wearable LoRa projects.

ESP32-S3 keyboard terminal with 3.1" e-paper touchscreen, LoRa SX1262, GPS, BHI260AP AI IMU, PCM5102A/ES8311 audio, 1400mAh battery, and optional 4G LTE (A7682E) for off-grid terminal applications.

Enhanced ESP32-S3 two-way radio board with SA868 UHF/VHF module, L76K GNSS, 1.3" OLED, AXP2102 PMIC, WS2812 RGB LED, TF card, and PPT button for APRS and walkie-talkie applications.

ESP32-S3 multi-protocol RF tool with CC1101 sub-GHz transceiver (300–928 MHz), 13.56 MHz RFID, IR transmit/receive, 1.9" IPS display, and rotary encoder for RF analysis and replay attacks.

Ultra-affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, USB 3.0, QWIIC/Stemma QT connector, power switch, and breadboard-compatible pinout at under $8.

Tiny ESP32-C6 dev board with WiFi 6, BLE 5, Zigbee/Thread (802.15.4), 0.85" 128×128 touchscreen, LiPo battery charging, and breathing LED in a thumbnail-sized form factor.

Compact ESP32-S3 board with a 0.75" round 160×160 TFT LCD (GC9D01N), 16MB flash, 8MB PSRAM, WiFi, and BLE 5 for wearable watchface and circular display applications.

ESP32-S3 board with 6 onboard relays, 16MB flash, 8MB PSRAM, WiFi, and BLE for ESPHome smart home automation, controlling lights, appliances, and HVAC systems.

Affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, integrated 18650 battery holder, WiFi, and BLE 5.0 for battery-powered IoT sensor nodes under $10.

Smart rotary encoder controller based on ESP32-C6 with WiFi 6, BLE 5, Zigbee/Thread, 4 RGB LEDs, buzzer, and magnetic Hall-effect knob for wireless volume control and smart home automation.

Dual-MCU smart panel (ESP32-S3 + ESP32-H2) with 4" 480×480 IPS LCD (ST7701S), WiFi, BLE, native Zigbee/Thread/Matter via H2 co-processor, and optional RS485/CAN FD expansion for wall-mounted smart hom

ESP32-S3 LoRa development board with 0.96" OLED display, multiple LoRa module options (SX1262/SX1276/SX1280/LR1121), WiFi, BLE, and 18650 battery support for Meshtastic and IoT applications.

ESP32-S3 development board with SIM7080G NB-IoT/LTE-M/GNSS module, 16MB flash, 8MB PSRAM, 18650 battery support, and USB-C connectivity for low-power IoT applications.

ESP32-S3 board with SI4732-A10 AM/FM/SW/LW radio receiver, 1.9" IPS display, 900mAh battery, and rotary encoder for a portable software-defined radio experience.

Compact ESP32-C6 development board with WiFi 6, BLE 5, and IEEE 802.15.4 (Zigbee/Thread/Matter) support, featuring 4MB flash and USB-C for next-generation IoT protocols.

ESP32-S3 development board with a unique wide bar-format display, 16MB flash, 8MB PSRAM, and USB-C for information display and custom UI projects.

Open-source dual-MCU access point for wirelessly managing e-paper tags. ESP32-C6 handles WiFi connectivity while ESP32-S3 serves as a 2.4GHz RF transceiver for IEEE 802.15.4 communication with electro

LILYGO T-Mini E-Paper S3 is a compact ESP32-S3 board with a 1.02-inch 128×80 e-paper display, 4MB flash, 2MB PSRAM, WiFi, BLE 5, TF card slot, and support for 18350 battery. Available in 868MHz and 91

ESP32-S3 camera development board with mPCIe slot for LILYGO T-PCIE SIM cellular modules, supporting OV2640 or OV5640 cameras, 16MB flash, 8MB PSRAM, TF card, and I2S microphone for connected vision a

ESP32-S3 smart rotary encoder knob with 1.2-inch round AMOLED display, capacitive touch, buzzer, vibration motor, and dual Qwiic connectors — ideal for smart home control and media interfaces.

LILYGO T-Micro32 S3 is an ultra-compact ESP32-S3FH4R2 module with Wi-Fi, BLE 5.0, 4MB flash, 2MB PSRAM, and dual-core Xtensa LX7 processor in a minimal footprint.

LILYGO T3 S3 E-Paper is an ESP32-S3 LoRa development board with a 2.13-inch 250×122 e-paper display (DEPG0213BN), 4MB flash, 2MB PSRAM, WiFi, BLE 5, SX1262 LoRa transceiver, and LiPo battery support.

ESP32-S3 industrial communication board with three RS485 ports and one CAN bus — enables multi-protocol data switching for automation, sensor networks, and legacy equipment integration.

ESP32-S3-based development board with SIM7670G LTE Cat-1 modem, integrated GPS, Wi-Fi, Bluetooth 5, MicroSD, solar charging input, and 16 MB flash for high-performance IoT and asset tracking applicati

LILYGO T5 E-Paper S3 Pro is an ESP32-S3 board with a 4.7-inch 16-greyscale e-paper display, SX1262 LoRa, touch input, RTC, BQ25896/BQ27220 battery management, 16MB flash, 8MB PSRAM, and optional GPS.

ESP32-S3 three-board stack with SX1262 LoRa, CAN, RS485, RS232, Ethernet (W5500), relay, capacitive touch LCD, and DC input — a versatile industrial IoT gateway with long-range wireless.

ESP32-S3R8 development board with a 1.1-inch JD9613 AMOLED display (126×294), onboard trackball, 16MB flash, 8MB PSRAM, WiFi, and BLE 5 — a compact touchless navigation dev kit for creative UI and int

ESP32-S3-WROOM-1 development board with MAX13487E RS-485 transceiver, T-PCIE SIM expansion slot, Grove connector, WiFi, and BLE — designed for vending machine control and industrial RS-485 communicati

LILYGO T4 S3 is an ESP32-S3 development board with a 2.41-inch AMOLED touchscreen (450x600), 16MB flash, 8MB PSRAM, microSD slot, Wi-Fi, and Bluetooth 5 LE.

High-end ESP32-S3 Ethernet development board with W5500 SPI Ethernet, Power-over-Ethernet support, 16MB flash, 8MB PSRAM, and modular LoRa/LTE expansion shield system.

Compact USB dongle with ESP32-C5 featuring dual-band WiFi 6 (2.4/5GHz), Bluetooth 5, 802.15.4, 0.96-inch LCD, TF card slot, and 16MB flash — the first LILYGO dongle with WiFi 6 support.

ESP32-S3 industrial communication board with isolated RS-232 and RS-485 modules (3000V isolation), 7–24V DC input via DB9 connector, Wi-Fi, and Bluetooth 5 LE for Modbus and industrial serial networki

ESP32-S3 dev board with 7" capacitive touch IPS display (800x480), CAN/RS485 interfaces, and battery support. Built for HMI panels, industrial control, and IoT dashboards.

Third-generation M5Stack Core with ESP32-S3 dual-core 240MHz, 2.0\" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, RTC, 5

Credit-card-sized ESP32-S3 handheld computer with 56-key mechanical keyboard, 1.14" IPS display, BMI270 IMU, ES8311 audio codec, 1W speaker, MEMS microphone, IR transmitter, 1750mAh battery, Grove I2C

Ultra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD (128x128), 6-axis IMU, 8MB flash, Wi-Fi, BLE 5.0, USB-C, and Grove port. Ideal for IoT prototyping and embedded UI projects.

ESP32-S3 based LoRa development board with built-in 0.96" OLED display, SX1262 LoRa transceiver, WiFi, BLE 5.0, USB-C, and LiPo battery charging. One of the most popular boards for Meshtastic.

ESP32-S3 smart rotary knob with 1.28" round GC9A01 touch display (240x240), rotary encoder, RFID reader (WS1850S), RTC (BM8563), buzzer, and 2 Grove ports for IoT control interfaces.

Ultra-compact ESP32-C6 dev board by M5Stack with WiFi 6, BLE 5.0, Zigbee 3.0, and Thread/Matter support. RISC-V single-core at 160MHz, USB-C, RGB LED, and button in a tiny form factor.

Ultra-compact ESP32-S3 dev board (24x24mm) by M5Stack without display. Features WiFi, BLE 5.0, 8MB flash, Grove port, RGB LED, button, and USB-C in a tiny enclosure for IoT and embedded projects.

Open-source ESP32-S3 camera board with PoE, microSD, and Stemma QT designed for AI-powered utility meter reading using the AI-on-the-edge-device firmware with TensorFlow Lite inference.

ESP32-S3 dev board with 3.49" capacitive touch IPS display, dual microphone array, 6-axis IMU, RTC, and battery support. Ideal for wearable UIs and compact IoT dashboards.

Compact ESP32-S3 dev board by Waveshare in Arduino Nano form factor. Features dual-core 240MHz LX7, 16MB flash, 8MB PSRAM, WiFi, BLE 5.0, and USB-C. Drop-in ESP32-S3 upgrade for Nano-sized projects.

20-key open-source mechanical macropad with duckyScript engine, ESP32-S3, 1.5\" OLED, Bluetooth 5.0, hot-swap switches, dual rotary encoders, and microSD — a powerful Stream Deck alternative.

Open-source ESP32-S3 WiFi controller for Daikin air conditioners with local-only control via MQTT and Home Assistant. Replaces cloud-dependent Daikin WiFi modules with privacy-first, no-internet-requi

ESP32-C6 based 2-channel AC relay module with WiFi 6, Zigbee 3.0, and Thread support. Compact relay board compatible with Arduino and ESPHome for smart home AC switching up to 10A per channel.

ESP32-C6 based WiFi smart switch for single live wire AC power control. Supports WiFi 6 and Zigbee 3.0, fits standard wall boxes for home automation.

ESP32-S3 based air quality monitor with SEN55 particulate/VOC sensor, SCD40 CO2 sensor, 1.54" e-ink display, 600mAh battery, and Grove connector.

Open-source flight controller based on the Pixhawk FMUv5 standard. Features STM32F765 processor at 216MHz, triple redundant IMUs, barometer, and magnetometer. Runs ArduPilot or PX4 autopilot firmware.

Open-source RTK GNSS board with SkyTraq PX1105R receiver and ESP32-S3 for centimeter-level positioning. Works as base station or rover with WiFi, Bluetooth LE, and optional LoRa connectivity.

ESP32-S3 based multi-mode BLE detection and security research tool with integrated piezo buzzer, MMCX antenna connector, and seven swappable firmware modes for surveillance detection, drone tracking,

Pocket-sized open-source LoRa mesh messenger with ESP32-S3, RFM95 radio, 2.8" IPS display, and 36-key QWERTY keyboard. Runs Meshtastic and CircuitPython firmware for off-grid text communication.

Compact Meshtastic-compatible LoRa communicator with push-button keyboard, built around the Heltec Wireless Tracker with ESP32-S3, SX1262 LoRa, GPS, and a 0.96" TFT display for off-grid mesh messaging

NASA-themed programmable smartwatch powered by ESP32-S3 with BLE 5.0, 6-axis IMU, ST7735S display, and activity tracking. Pre-assembled and ready to code.

NASA-themed DIY robotics kit with ESP32-S3, camera, dual DC motors, 3 servos, and WiFi/BLE. Build a programmable Mars Rover replica with robotic arm and live video feed.

Open-source Feather-form-factor ESP32-C6 board with WiFi 6, BLE 5, Thread, Zigbee, STEMMA QT, NeoPixel, LiPo charging with MAX17048, and CircuitPython support — $14.95.

ESP32-S3-based DMX512 lighting programming controller with dual-core architecture, 8 optically isolated inputs, RS485, relay output, WiFi/Bluetooth, and DIN-rail mounting in an alloy steel enclosure.

Compact USB-A dongle development board with ESP32-C6 RISC-V MCU, 1.14\" IPS LCD, WiFi 6, BLE 5.0, Zigbee 3.0, Thread, and microSD slot for portable IoT projects.

All-in-one robotics development board with ESP32-S3 (16MB flash, 8MB PSRAM), four-channel 2.5A motor driver, OV2640 camera, WiFi, Bluetooth 5, microSD, and GDI display connector for building smart rob

ESP32-S3 dual-core IoT microcontroller with AI acceleration, WiFi 802.11 b/g/n, BLE 5.0, 26 GPIO pins, 20 ADC channels, USB 2.0 OTG, GDI display interface, lithium battery charging, and stamp-hole PCB

All-in-one AI coding board for STEM education with ESP32-S3, 2.8-inch touchscreen, 2MP camera, microphone, speaker, environmental sensors, WiFi, Bluetooth 5, and pre-loaded AI models for vision, voice

All-metal modular drive-by-wire 4WD robot chassis with ESP32-S3 controller, hub motors with built-in FOC control, CNC metal suspension, LIN bus communication, IP32 protection, and 12 kg payload capaci

ESP32-S3 AI camera module with 2MP wide-angle night vision sensor, I2S speaker and microphone, ambient light sensor, WiFi/BLE 5.0, and edge AI inference support in a 42x42mm package.

Compact castellated ESP32-S3 development board with Semtech LR1121 multi-band LoRa transceiver supporting Sub-GHz and 2.4GHz bands, WiFi, BLE 5.0, and Meshtastic compatibility in a 41x21mm form factor

ESP32-S3 AIoT camera board with 5MP OV5640 autofocus camera, dual-microphone array with noise cancellation, ES8311 audio codec, NS4150B speaker amplifier, battery charging, and display/camera expansio

ESP32-S3 AI smart speaker development board with dual-microphone array, ES8311 audio codec, 7 surround RGB LEDs, RTC, camera and LCD expansion interfaces, and LiPo battery support for voice assistant

Industrial ESP32-S3 control board with isolated RS-485 and CAN bus interfaces, 7-36V wide voltage input, PCF85063 RTC, DIN rail enclosure, and WiFi/Bluetooth for industrial IoT and automation applicat

Industrial ESP32-S3 controller with 8-channel optocoupler-isolated digital inputs (5-36V), 8-channel Darlington outputs (500mA each), PoE Ethernet (W5500), isolated RS-485 and CAN bus, RTC, and DIN ra

Breadboard-friendly open-source ESP32-C6 dev board with WiFi 6, Thread, Zigbee, BLE 5, built-in LiPo charger, and dual USB-C — all for under €9.

Low-cost ESP32-C6 IoT board with WiFi 6, BLE 5, Thread, Zigbee, Matter, solar panel charging with MPPT, and ultra-low 16µA deep sleep — for $5.90.

Coin-sized (25×20.5mm) ESP32-C6 wearable dev board with WiFi 6, BLE 5, Thread, Zigbee, Matter, integrated LiPo charger, and 14µA deep sleep — for $4.90.

Thumb-sized (21×17.8mm) Matter/Thread/Zigbee/WiFi 6/BLE 5.3 dev board with dual RISC-V cores, onboard antenna, 15µA deep sleep, and hardware security — for ~$5.

ESP32-S3 industrial PLC controller with 1.14" IPS LCD, 4 relays, 8 opto-isolated inputs, RS-485, CAN bus, INA226 power monitor, RTC, buzzer, microSD, and DIN-rail mounting in a compact enclosure.

Ultra-compact ESP32-S3 + SX1262 LoRa module with stamp-hole design for direct PCB integration, supporting WiFi, BLE 5, and LoRa at 470-928MHz with deep sleep current under 10uA.

Espressif ESP32-C6 WROOM module with 8MB flash and PCB antenna, supporting Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread — for soldering onto custom IoT hardware.

Compact ESP32-S3 + SX1262 LoRa development board with 0.96" OLED display, USB-C, and built-in LiPo charging. One of the primary boards for Meshtastic and LoRaWAN IoT projects.

Upgraded ESP32-S3R2 + SX1262 LoRa dev board with 2MB PSRAM, 16MB flash, 0.96" OLED, switchable FPC/IPEX 2.4G antenna, GNSS interface, and solar input. Meshtastic and LoRaWAN ready.

Espressif ESP32-C6 WROOM module with 4MB flash and PCB antenna, supporting Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread — for soldering onto custom IoT hardware.

Espressif reference development board for the ESP32-C6 with 8MB flash, Wi-Fi 6, Bluetooth 5 LE, Zigbee 3.0, Thread, RGB LED, dual USB-C ports, and full GPIO breakout.

Ultra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD, BMI270 IMU, BMM150 magnetometer, 8MB PSRAM, IR transmitter, LP5562 RGB LED driver, and Grove port for IoT and robotics.

Ultra-compact ESP32-S3 board by Unexpected Maker in TinyPICO form factor with u.FL external antenna connector, 8MB flash, 8MB PSRAM, LiPo charging, and dual-core 240 MHz.

Unexpected Maker's pro ESP32-S3 Feather board with u.FL external antenna connector, 16MB flash, 8MB PSRAM, dual STEMMA QT connectors, LiPo charging, and dual 700mA regulators.

Unexpected Maker's ProS3 ESP32-S3 with u.FL external antenna, 16MB flash, 8MB PSRAM, 27 GPIO castellated headers, dual LDO regulators, LiPo charging, and STEMMA QT.

ESP32-S3 development board with optional SX1262 LoRa module and 1.9-inch TFT color display. Supports Meshtastic, LoRaWAN, Arduino, MicroPython, and features integrated battery management with 18uA dee

Espressif audio and multimedia development board with ESP32-S3, dual-microphone array for far-field wake-word detection, camera support, LCD interface, microSD, and Wi-Fi + BLE.

Open-source AIoT development kit with ESP32-S3, 2.4" touchscreen, dual microphones, speaker, Wi-Fi, BLE, Matter support, 16MB flash, 16MB PSRAM, and a high-density expansion connector.

ESP32-S3-BOX-3 bundle kit including the AIoT dev board with 2.4" touchscreen, dual mics, speaker, plus the DOCK stand, RGB LED module, USB-C cable, and Dupont wires.

ESP32-S3 Feather board with 8MB flash, w.FL external antenna connector (MHF3/IPEX3), native USB-C, MAX17048 battery monitor, LiPo charging, NeoPixel, and STEMMA QT.

Official Espressif development board featuring the ESP32-C6 — a RISC-V single-core MCU with WiFi 6, BLE 5.0, Zigbee 3.0, Thread 1.3, and native Matter support. 8MB flash, USB-C JTAG/serial.

ESP32-S3 board designed to drive HUB75 LED matrix panels directly, with built-in WiFi, BLE 5.0, native USB, STEMMA QT connector, and two user buttons — ideal for dynamic digital signage and LED art di

Feather-format ESP32-S3 board with native USB, WiFi, BLE 5.0, 8MB flash, LiPo charging, and full Feather ecosystem compatibility — a capable wireless development platform for CircuitPython and Arduino

Compact ESP32-S3 + SX1262 LoRa development board with WiFi, BLE 5.0, and integrated battery management. Meshtastic and LoRaWAN compatible, with a slim stick form factor ideal for IoT sensor nodes and

ESP32-S3 IoT controller with 2.0" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, 200mAh battery, and Grove expansion port

ESP32-S3 development board with integrated camera and Wi-Fi HaLow (802.11ah) module for long-range wireless video transmission up to 1-2km at speeds up to 32 Mbps. Features USB-C, SD card slot, and Li

ESP32-S3-based IoT development board with built-in 0.96" OLED display, lithium battery management, WiFi and Bluetooth 5.0 connectivity, and USB-C interface in a compact 50mm form factor.

A compact universal e-ink driver board based on ESP32-S3FN8 with WiFi and Bluetooth connectivity, 24-pin FFC interface compatible with most e-ink displays, USB-C and LiPo battery support, and Arduino

ESP32-S3 development board with SX1262 LoRa (28dBm), UC6580 dual-frequency GNSS, 0.96" TFT display, solar charging, and Meshtastic/MeshCore support for GPS tracking and mesh networking.

ESP32-S3 development board with integrated SX1262 LoRa transceiver, UC6580 dual-frequency GNSS receiver, and 0.96-inch TFT display for IoT asset tracking, Meshtastic mesh networking, and LoRaWAN appli

Ultra-compact IP65 waterproof LoRa sensor capsule with ESP32-S3, SX1262 LoRa, GNSS, temperature/humidity, barometric pressure, and 3-axis accelerometer. Meshtastic-compatible with 250mAh battery and o

Compact ESP32-S3 development board with integrated SX1262 LoRa transceiver and 0.49-inch OLED display. Supports Meshtastic, LoRaWAN, WiFi, and BLE 5.0 in a breadboard-friendly form factor with battery

ESP32-S3 development board with 2.13-inch E-Paper display and optional SX1262 LoRa radio, supporting Meshtastic, LoRaWAN, Arduino, and MicroPython. Features WiFi, BLE 5.0, ultra-low 20uA deep sleep, l

ESP32-S3 development board with 2.9-inch e-ink display and optional SX1262 LoRa radio, featuring Raspberry Pi GPIO header, Meshtastic support, and 18uA deep sleep for battery-powered IoT and mesh netw

ESP32-S3 + SX1262 LoRa E-Ink development board with 2.13" e-paper display, WiFi, BLE 5.0, and LoRa connectivity. Designed for electronic shelf labels, Meshtastic mesh nodes, and low-power IoT sensor d

Arduino Nano form factor powered by ESP32-S3 with WiFi 802.11 b/g/n, Bluetooth LE 5.0, dual-core Xtensa LX7 at 240MHz, 8MB flash, 512KB SRAM, USB-C, and HID support — Arduino's compact IoT powerhouse

Cost-effective Portenta module with Renesas RA6M5 ARM Cortex-M33 at 200MHz, 2MB flash, 512KB SRAM, WiFi/BLE, hardware security, and Portenta/MKR compatibility — bringing industrial IoT capabilities at