# device — Open Hardware Directory > **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link. **22 device listed.** ## LILYGO T5 E-Paper S3 Pro Lite A pocket-sized ESP32-S3 development board with a 4.7-inch capacitive touchscreen e-paper display (960×540, 16 grayscale), anti-glare glass, warm-toned backlight, MagSafe wireless charging, and comprehensive battery management. [Details](https://openhardware.directory/devices/lilygo-t5-e-paper-s3-pro-lite) | [Markdown](https://openhardware.directory/devices/lilygo-t5-e-paper-s3-pro-lite/md) ## LILYGO T-Display Compact ESP32-PICO-D4 development board with integrated 1.14-inch ST7789V IPS LCD (135×240, 260 PPI), WiFi, Bluetooth 4.2/BLE, and Arduino/MicroPython support. [Details](https://openhardware.directory/devices/lilygo-t-display) | [Markdown](https://openhardware.directory/devices/lilygo-t-display/md) ## LILYGO T-Display S3 ESP32-S3 development board with 1.9-inch ST7789V TFT display (170×320), optional capacitive touch, 16MB flash, 8MB PSRAM, and USB-C. Popular for smart displays and IoT dashboards. [Details](https://openhardware.directory/devices/lilygo-t-display-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3/md) ## LILYGO T-Display S3 AMOLED ESP32-S3 board with 1.91-inch RM67162 AMOLED display (240×536), optional touch, 16MB flash, 8MB PSRAM, and USB-C — delivering vivid OLED visuals for IoT dashboards and smart displays. [Details](https://openhardware.directory/devices/lilygo-t-display-s3-amoled) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3-amoled/md) ## LILYGO T-Pico C3 Dual-MCU board combining RP2040 and ESP32-C3, with a 1.14-inch ST7789V display, WiFi, BLE 5.0, and Arduino/MicroPython support — bringing Raspberry Pi Pico connectivity to wireless IoT projects. [Details](https://openhardware.directory/devices/lilygo-t-pico) | [Markdown](https://openhardware.directory/devices/lilygo-t-pico/md) ## LILYGO T-RGB ESP32-S3 board with a circular 2.1\" or 2.8\" ST7701S RGB display (480×480) and capacitive touch — perfect for smart home controllers, round-display clocks, and interactive dashboards. [Details](https://openhardware.directory/devices/lilygo-t-rgb) | [Markdown](https://openhardware.directory/devices/lilygo-t-rgb/md) ## LILYGO T-HMI ESP32-S3 HMI development board with a 2.8-inch resistive touchscreen, GROVE connectors, 16MB flash, 8MB PSRAM, and USB-C — designed for industrial HMI panels and interactive control interfaces. [Details](https://openhardware.directory/devices/lilygo-t-hmi) | [Markdown](https://openhardware.directory/devices/lilygo-t-hmi/md) ## LILYGO T5 V2.3.1 LILYGO T5 V2.3.1 is a 2.13-inch e-paper display module with SSD1680 driver, supporting 212×104 black-and-white output via SPI. Ultra-low power design retains the image without any power supply. [Details](https://openhardware.directory/devices/lilygo-t5-v2-3-1) | [Markdown](https://openhardware.directory/devices/lilygo-t5-v2-3-1/md) ## LILYGO T5s 2.7 inch E-Paper LILYGO T5s is an ESP32 development board with a 2.7-inch 264×176 e-paper display, onboard I2S audio (MAX98357A amplifier + ICS43434 MEMS mic), 500mA battery management, and TF card support. [Details](https://openhardware.directory/devices/lilygo-t5s-2-7inch-e-paper) | [Markdown](https://openhardware.directory/devices/lilygo-t5s-2-7inch-e-paper/md) ## LILYGO T5 2.13inch E-Paper LILYGO T5 2.13inch E-Paper is an ESP32-D0WDQ6 V3 development board with a 2.13-inch 212×104 e-ink display supporting 4-level grayscale, 4MB flash, TF card slot, and battery management with 4 user buttons. [Details](https://openhardware.directory/devices/lilygo-t5-2-13inch-e-paper) | [Markdown](https://openhardware.directory/devices/lilygo-t5-2-13inch-e-paper/md) ## LILYGO T-Mini E-Paper S3 LILYGO T-Mini E-Paper S3 is a compact ESP32-S3 board with a 1.02-inch 128×80 e-paper display, 4MB flash, 2MB PSRAM, WiFi, BLE 5, TF card slot, and support for 18350 battery. Available in 868MHz and 915MHz variants. [Details](https://openhardware.directory/devices/lilygo-t-mini-epaper-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-mini-epaper-s3/md) ## LILYGO T3 S3 E-Paper LILYGO T3 S3 E-Paper is an ESP32-S3 LoRa development board with a 2.13-inch 250×122 e-paper display (DEPG0213BN), 4MB flash, 2MB PSRAM, WiFi, BLE 5, SX1262 LoRa transceiver, and LiPo battery support. [Details](https://openhardware.directory/devices/lilygo-t3-s3-epaper) | [Markdown](https://openhardware.directory/devices/lilygo-t3-s3-epaper/md) ## LILYGO T5 E-Paper S3 Pro LILYGO T5 E-Paper S3 Pro is an ESP32-S3 board with a 4.7-inch 16-greyscale e-paper display, SX1262 LoRa, touch input, RTC, BQ25896/BQ27220 battery management, 16MB flash, 8MB PSRAM, and optional GPS. [Details](https://openhardware.directory/devices/lilygo-t5-e-paper-s3-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t5-e-paper-s3-pro/md) ## LILYGO ESP32 OLED V3.0 ESP32 development board with integrated 0.96-inch SSD1306 OLED display, 4MB Flash, 520KB SRAM, WiFi, Bluetooth dual-mode, USB-C, and onboard LiPo battery charging for compact IoT display projects. [Details](https://openhardware.directory/devices/lilygo-esp32-oled-v3-0) | [Markdown](https://openhardware.directory/devices/lilygo-esp32-oled-v3-0/md) ## LILYGO TO-ESP8266 OLED SH1106 ESP8266 development board with 1.3-inch SH1106 OLED display, 8 digital I/O pins, CH9102 USB-serial, 3.3V operation, WiFi 802.11 b/g/n, and JST 1.25mm LiPo connector — supports ESPHome and Tasmota firmware. [Details](https://openhardware.directory/devices/lilygo-to-esp8266-oled-sh1106) | [Markdown](https://openhardware.directory/devices/lilygo-to-esp8266-oled-sh1106/md) ## UkieLab WiFi Weather Station 7.5" A smart WiFi-enabled weather station with a 7.5\" e-ink display showing current conditions, humidity, pressure, and 4-day forecasts via Apple Weather. Available in USB-powered or battery-powered versions with optional CO2 sensor. [Details](https://openhardware.directory/devices/ukielab-wifi-weather-station-75) | [Markdown](https://openhardware.directory/devices/ukielab-wifi-weather-station-75/md) ## DFRobot FireBeetle 2 ESP32-E Compact ESP32-E IoT microcontroller with WiFi 802.11 b/g/n, Bluetooth 4.2, 18 digital I/O, 11 analog inputs, 7 touch pins, 2 DACs, onboard WS2812 RGB LED, GDI display interface, and lithium battery charging in a tiny 25.4x60mm form factor. [Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-e) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-e/md) ## DFRobot FireBeetle ESP32 Compact ESP32 IoT microcontroller with dual-core Xtensa LX6 at 240MHz, WiFi 802.11 b/g/n, Bluetooth 4.2, 16MB flash, 520KB SRAM, 10 digital I/O, 5 analog inputs, onboard LiPo charging, 10uA deep sleep, and 250+ tutorials. [Details](https://openhardware.directory/devices/dfrobot-firebeetle-esp32) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-esp32/md) ## Adafruit PyPortal Titano Large-screen IoT display board with ATSAMD51J20 + ESP32 WiFi coprocessor, 3.5" 320×480 resistive touchscreen TFT, 8MB Flash, microSD, speaker, and USB-C. Designed for Python-powered internet-connected dashboards. [Details](https://openhardware.directory/devices/adafruit-pyportal-titano) | [Markdown](https://openhardware.directory/devices/adafruit-pyportal-titano/md) ## Adafruit PyPortal The Adafruit PyPortal is an all-in-one CircuitPython WiFi IoT display board featuring an ATSAMD51J20 Cortex-M4F, ESP32 WiFi coprocessor, 3.2" 320×240 color touchscreen, built-in speaker, NeoPixel, microSD, and temperature sensor — ready for internet-connected dashboards out of the box. [Details](https://openhardware.directory/devices/adafruit-pyportal) | [Markdown](https://openhardware.directory/devices/adafruit-pyportal/md) ## Adafruit MagTag The Adafruit MagTag is an ESP32-S2 WiFi e-paper IoT display board featuring a 2.9" 296×128 grayscale e-ink screen, 4 NeoPixels, LIS3DH accelerometer, 4 user buttons, STEMMA QT, USB-C, LiPo charging, and a deep-sleep current of ~250µA — ideal for low-power battery-driven IoT displays. [Details](https://openhardware.directory/devices/adafruit-magtag) | [Markdown](https://openhardware.directory/devices/adafruit-magtag/md) ## Heltec WiFi Kit 32 (V3) ESP32-S3-based IoT development board with built-in 0.96" OLED display, lithium battery management, WiFi and Bluetooth 5.0 connectivity, and USB-C interface in a compact 50mm form factor. [Details](https://openhardware.directory/devices/heltec-wifi-kit-32-v3) | [Markdown](https://openhardware.directory/devices/heltec-wifi-kit-32-v3/md)