Battery Powered Sensor Node

ESP32-WROVER development board with 0.96-inch OLED display, five-way directional button, single 18650 battery holder, 8MB PSRAM, WiFi, and BLE 4.2 — a compact handheld IoT controller in a slim form fa

Ultra-small (20x20mm), ultra-low-power LoRa/LoRaWAN + concurrent GNSS asset tracker by Tlera Corp, built on the Murata CMWX1ZZABZ-078 module with STM32L082 MCU, SX1276 LoRa radio, u-blox MAX-M8Q GNSS,

Open-source Feather-form-factor ESP32-C6 board with WiFi 6, BLE 5, Thread, Zigbee, STEMMA QT, NeoPixel, LiPo charging with MAX17048, and CircuitPython support — $14.95.

Coin-sized ESP32-C3 RISC-V IoT development board with WiFi, BLE 5.0, integrated LiPo charging, 13 GPIO pins, and USB-C in a 25x20.5mm form factor.

ESP32-C5 RISC-V development kit with dual-band WiFi 6 (2.4/5GHz), BLE 5, Zigbee 3.0, Thread 1.3, and Matter support. Features solar charging, 21uA deep sleep, IO expansion board, and 18 digital I/O pi

Compact ESP32 dual-core development board with WiFi, Bluetooth 4.2, sewable I/O pads, and wearable-friendly 35x34mm form factor for IoT and e-textile projects.

Compact ESP32-E IoT microcontroller with WiFi 802.11 b/g/n, Bluetooth 4.2, 18 digital I/O, 11 analog inputs, 7 touch pins, 2 DACs, onboard WS2812 RGB LED, GDI display interface, and lithium battery ch

ESP32-S3 dual-core IoT microcontroller with AI acceleration, WiFi 802.11 b/g/n, BLE 5.0, 26 GPIO pins, 20 ADC channels, USB 2.0 OTG, GDI display interface, lithium battery charging, and stamp-hole PCB

Ultra-compact castellated ESP32-H2 development board with BLE 5.2, Zigbee 3.0, Thread 1.3, and Matter support. USB-C powered with WS2812 RGB LED, 15 GPIO pins, and 4MB flash in a tiny 23.5 x 15.2mm fo

Low-power Arduino-compatible board with ATmega328P and Dialog BLE 4.1 chip, featuring 14 digital I/O, 6 analog inputs, wireless OTA programming, 25uA deep sleep, onboard LiPo charging, and dual interr

Compact ESP32 IoT microcontroller with dual-core Xtensa LX6 at 240MHz, WiFi 802.11 b/g/n, Bluetooth 4.2, 16MB flash, 520KB SRAM, 10 digital I/O, 5 analog inputs, onboard LiPo charging, 10uA deep sleep

Compact ESP8266 WiFi IoT microcontroller with Tensilica L106 at 80/160MHz, 16MB flash, 50KB SRAM, 10 digital I/O, onboard LiPo charging, 46uA low-power mode, OTA updates, and Arduino/MicroPython suppo

A compact RP2040-based LoRa module with SX1262 transceiver, available in 410-525MHz (LF) and 850-930MHz (HF) variants, featuring 2MB flash, 20 GPIO pins, IPEX antenna connector, and castellated edge d

Ultra-compact Matter/Thread/BLE development board based on Silicon Labs MGM240S, bringing official Matter support to the beloved Arduino Nano form factor at 45×18mm.

Feather-compatible Matter/Thread/Zigbee/BLE dev board based on Silicon Labs MGM240P with Qwiic, LiPo charging, microSD, and +20dBm radio range.

Breadboard-friendly open-source ESP32-C6 dev board with WiFi 6, Thread, Zigbee, BLE 5, built-in LiPo charger, and dual USB-C — all for under €9.

Ultra-affordable open-source ESP32-H2 dev board for Thread, Zigbee, and Matter — BLE 5, LiPo charging, Qwiic/Stemma, dual USB-C, for €5.95.

Low-cost ESP32-C6 IoT board with WiFi 6, BLE 5, Thread, Zigbee, Matter, solar panel charging with MPPT, and ultra-low 16µA deep sleep — for $5.90.

Coin-sized (25×20.5mm) ESP32-C6 wearable dev board with WiFi 6, BLE 5, Thread, Zigbee, Matter, integrated LiPo charger, and 14µA deep sleep — for $4.90.

Thumb-sized (21×17.8mm) Matter/Thread/Zigbee/WiFi 6/BLE 5.3 dev board with dual RISC-V cores, onboard antenna, 15µA deep sleep, and hardware security — for ~$5.

Ultra-low-power LoRa/LoRaWAN development node based on the ASR6502 SoC (ARM Cortex-M0+ @ 48MHz + SX1262), with a built-in 1/2AA battery holder, 3.5uA deep sleep, and Arduino compatibility. Ideal for r

ESP32-S3 development board with 2.13-inch E-Paper display and optional SX1262 LoRa radio, supporting Meshtastic, LoRaWAN, Arduino, and MicroPython. Features WiFi, BLE 5.0, ultra-low 20uA deep sleep, l

ESP32-S3 development board with 2.9-inch e-ink display and optional SX1262 LoRa radio, featuring Raspberry Pi GPIO header, Meshtastic support, and 18uA deep sleep for battery-powered IoT and mesh netw

Heltec CubeCell HTCC-AB02 is an ultra-low-power LoRa/LoRaWAN development board based on the ASR6502 SoC (ARM Cortex-M0+ with integrated SX1262), featuring a 0.96" OLED display, solar panel input, and