Smart Agriculture

ESP32-S3 development board with SIM7080G NB-IoT/LTE-M/GNSS module, 16MB flash, 8MB PSRAM, 18650 battery support, and USB-C connectivity for low-power IoT applications.

ESP32-WROVER-E development board with SIM7070G NB-IoT/LTE-M/GPRS modem, GPS, Wi-Fi, Bluetooth 4.2, MicroSD, and solar charging input for ultra-low-power IoT applications.

ESP32 development board combining 4-channel HX711 load cell amplifiers with LoRa SX1262 radio (868/915 MHz) for wireless weight measurement and IoT scale applications over long-range LoRa networks.

ESP32-WROVER-E development board with A7670E LTE Cat-1 modem supporting voice calls, SMS, and GPS positioning. Available with multiple regional frequency variants for global 4G deployments.

Long-range LoRa transceiver module with Semtech SX1262, UART interface, 1W output power, and up to 16km range at 210-241MHz. Ideal for remote telemetry and agricultural IoT.

Intelligent wireless LoRaWAN DTU with isolated RS485 interface, powered by STM32WLE5CCU6 ARM Cortex-M4 MCU with integrated Sub-GHz radio. Wide 6-36V input for industrial deployment.

Compact castellated ESP32-S3 development board with Semtech LR1121 multi-band LoRa transceiver supporting Sub-GHz and 2.4GHz bands, WiFi, BLE 5.0, and Meshtastic compatibility in a 41x21mm form factor

Ultra-compact ESP32-S3 + SX1262 LoRa module with stamp-hole design for direct PCB integration, supporting WiFi, BLE 5, and LoRa at 470-928MHz with deep sleep current under 10uA.

Compact ESP32-S3 + SX1262 LoRa development board with 0.96" OLED display, USB-C, and built-in LiPo charging. One of the primary boards for Meshtastic and LoRaWAN IoT projects.

Upgraded ESP32-S3R2 + SX1262 LoRa dev board with 2MB PSRAM, 16MB flash, 0.96" OLED, switchable FPC/IPEX 2.4G antenna, GNSS interface, and solar input. Meshtastic and LoRaWAN ready.

Multi-sensor expansion board for Pycom modules featuring light, barometric pressure, humidity, temperature, and 3-axis accelerometer sensors. Includes MicroSD slot, USB serial, LiPo charger, and ultra

ESP32-based quad-network MicroPython board with WiFi, Bluetooth LE, LoRa (SX1276 868/915/433MHz), and SigFox. 4MB PSRAM, 8MB flash, 24 GPIO. Can function as a nano LoRa gateway. FCC/CE certified.

A compact, low-cost dual-channel LoRaWAN gateway based on ESP32 and dual SX1276 transceivers, designed for indoor LoRa coverage of 1500-2000 square meters with support for SF7-SF12 spreading factors a

Compact 8-channel LoRaWAN gateway based on ESP32 and SX1303 + SX1250, with WiFi and Ethernet backhaul, 1.8-inch TFT display, and aluminum housing. Supports LoRaWAN Class A/C, TTN, and ChirpStack.

Ultra-low-power LoRaWAN development kit based on STM32L151CBU6 ARM Cortex-M3 MCU and Semtech SX1278 LoRa transceiver, with 6uA deep sleep current, integrated battery management, and CE certification.

Ultra-low-power LoRa/LoRaWAN development node based on the ASR6502 SoC (ARM Cortex-M0+ @ 48MHz + SX1262), with a built-in 1/2AA battery holder, 3.5uA deep sleep, and Arduino compatibility. Ideal for r

Ultra-compact ESP32-C3 + SX1262 LoRa/LoRaWAN module with WiFi and BLE, designed for SMT integration into IoT devices. Features 10uA deep sleep, +21dBm TX power, and Meshtastic compatibility in a tiny

Cost-effective 8-channel indoor LoRaWAN gateway based on MT7628 + SX1303/SX1250, supporting WiFi and Ethernet uplink with web-based configuration for TTN, ChirpStack, and custom MQTT servers.

Indoor edge computing LoRaWAN gateway with Rockchip RK3566 quad-core Cortex-A55 processor, SX1303+SX1250 8-channel LoRa radio, 2GB DDR4, 32GB eMMC, Gigabit Ethernet, dual-band WiFi, Bluetooth 4.0, and

IP66 waterproof edge computing LoRaWAN gateway with Rockchip RK3566 quad-core Cortex-A55 SoC, SX1303+SX1250 8-channel LoRa concentrator, 2GB DDR4, 32GB eMMC, pre-installed Debian Linux with Docker, an

WiFi HaLow (802.11ah) router and IoT gateway with 2.4GHz dual-band, up to 1km+ range, mesh networking, Ethernet, and OpenWrt-compatible MT7628 SoC.

LoRa-enabled IoT board with SAMD21 ARM Cortex-M0+ at 48MHz, Murata CMWX1ZZABZ LoRa module, ECC508 crypto chip, 2MB SPI flash, onboard LiPo charger, and 104\u00b5A low-power mode — designed for long-ra