256KB Flash

STM32WL55CCU6 LoRa development board with dual Cortex-M4 + M0+ cores, built-in LoRa/FSK/MSK radio at 433/868/915MHz, 0.96-inch SSD1315 OLED, 256KB Flash, 64KB RAM, and open-source Arduino/STM32CubeIDE

Intelligent wireless LoRaWAN DTU with isolated RS485 interface, powered by STM32WLE5CCU6 ARM Cortex-M4 MCU with integrated Sub-GHz radio. Wide 6-36V input for industrial deployment.

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM96 LoRa radio at 433 MHz. Spread-spectrum modulation for long-range links, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

ARM Cortex-M0+ Feather board with ATWINC1500 802.11 b/g/n WiFi, 256KB flash, 32KB RAM, 10 analog inputs, and built-in LiPo charger. FCC-certified WiFi for IoT and connected projects.

ARM Cortex-M0+ dev board with Bluetooth LE (nRF51822) in the compact Feather form factor. Features 256KB flash, 32KB RAM, native USB, and a built-in LiPo charger for wireless wearable and IoT projects

Variant of the Feather M0 WiFi (ATSAMD21 + ATWINC1500) with a u.FL antenna connector instead of a PCB trace antenna, allowing use of an external antenna for improved WiFi range.

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM69HCW sub-GHz radio at 868/915 MHz. Up to +20 dBm TX power, AES-128 encryption, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

Compact Arduino board with SAMD21 ARM Cortex-M0+ and ATSAMW25 integrated WiFi (802.11 b/g/n) with cryptochip and SSL support. Built-in LiPo charger, 8 digital I/O, and 7 analog inputs in a slim 65mm f

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM69HCW sub-GHz radio at 433 MHz. Up to +20 dBm TX power, AES-128 encryption, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM95W SX1276 LoRa radio for 868/915 MHz. Achieves 2+ km range, supports LoRaWAN, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM96W SX1278 LoRa radio for 433 MHz. Achieves 2+ km range, supports LoRaWAN, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

Ultra-compact ATSAMD21E18 ARM Cortex-M0+ board at 48 MHz with 256KB flash, 32KB RAM, 5 GPIO pins, built-in RGB DotStar LED, capacitive touch, native USB, and CircuitPython support. Weighs just 1.4g in

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM69HCW sub-GHz radio at 868/915 MHz. Up to +20 dBm TX power, AES-128 encryption, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM95 LoRa radio at 868/915 MHz. Spread-spectrum LoRa modulation for multi-kilometre range, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

Ultra-low-power LoRa development board with STM32L432KC ARM Cortex-M4 MCU and SX1276 transceiver, capable of 10-year battery life on AAA cells using the RadioShuttle peer-to-peer protocol.

Arduino's flagship UNO board upgraded with Renesas RA4M1 ARM Cortex-M4F at 48MHz, ESP32-S3 WiFi/BLE 5.0, built-in 12×8 LED matrix, 12-bit DAC, CAN bus, op-amp, and Qwiic connector — all in the classic

The affordable entry to Arduino's R4 generation — Renesas RA4M1 ARM Cortex-M4F at 48MHz with 256KB flash, 32KB SRAM, 12-bit DAC, CAN bus, op-amp, and USB-C in the classic UNO form factor at 5V. No wir

The newest Arduino Nano — Renesas RA4M1 ARM Cortex-M4F at 48MHz with 256KB flash, 32KB SRAM, Qwiic connector, RGB LED, castellated pins, and USB-C in an ultra-compact 43×17mm form factor. No wireless,

LoRa-enabled IoT board with SAMD21 ARM Cortex-M0+ at 48MHz, Murata CMWX1ZZABZ LoRa module, ECC508 crypto chip, 2MB SPI flash, onboard LiPo charger, and 104\u00b5A low-power mode — designed for long-ra

Ultra-quiet 32-bit 3D printer board with 4 integrated TMC2209 UART stepper drivers. STM32F103RCT6 @ 72MHz. Direct drop-in replacement for Ender 3. Supports Marlin and Klipper.

Improved 32-bit control board with 4 integrated TMC2209 UART drivers, dual Z ports, and STM32F103RCT6 @ 72MHz. Drop-in upgrade for Ender 3, CR-10S, Ender 5. Marlin and Klipper ready.