Off-Grid Communication

ESP32-S3 handheld dev board with QWERTY keyboard, trackball, 2.8" IPS LCD, LoRa SX1262, GPS, speaker, dual microphones, and 2000mAh battery in an ABS case.

ESP32-PICO-D4 development board with LoRa SX1276/SX1278 radio, 0.96\" SSD1306 OLED, microSD slot, WiFi, Bluetooth 4.2, and LiPo battery support in a compact 66×36mm form factor.

Open-source ESP32-S3 smartwatch with LoRa, 1.3" 240×240 IPS touchscreen, haptic feedback, accelerometer, speaker, microphone, IR transmitter, and 1500mAh battery. Supports Meshtastic, ESPHome, Arduino

ESP32 development board combining LoRa radio (SX1276/SX1278), u-blox NEO-6M GPS, 0.96" OLED display, and 18650 battery support — the go-to board for Meshtastic and LoRa tracking projects.

nRF52840 + SX1262 LoRa + L76K GPS all-in-one board with 1.54-inch e-paper display, 850mAh battery, Thread, Zigbee, and BLE 5.0 — runs Meshtastic, SoftRF, and custom NRF firmware out of the box.

ESP32-S3 handheld terminal with 2.8-inch IPS display, mini QWERTY keyboard, trackball, optional SX1262 LoRa, speaker, and microphone — a self-contained portable communicator running Meshtastic and Mes

Enhanced T-Echo with nRF52840, SX1262 LoRa, L76K GPS, BHI260AP IMU, 2400mAh battery, 1.54-inch e-paper display, vibration motor, buzzer, and 1/4-inch mount — Meshtastic-ready with extended runtime.

Simplified T-Echo with nRF52840, SX1262 LoRa, and optional L76K GPS — a low-cost, low-power LoRa node and Meshtastic-compatible board for off-grid mesh networking.

LILYGO T3 S3 E-Paper is an ESP32-S3 LoRa development board with a 2.13-inch 250×122 e-paper display (DEPG0213BN), 4MB flash, 2MB PSRAM, WiFi, BLE 5, SX1262 LoRa transceiver, and LiPo battery support.

LILYGO LoRa3 (T3 LoRa32 V1.6.1) is an ESP32 development board combining Wi-Fi, BLE, and LoRa radio (SX1276/SX1278) with OLED display and TF card slot for IoT and mesh networking.

LILYGO LoRa V1.3 is an ESP32 development board with SX1276 LoRa radio at 868/915 MHz, optional 0.96-inch OLED display, Wi-Fi, BLE, and 4MB flash for IoT and LoRa applications.

STM32-based M17 digital amateur radio modem board with DE-9 connector — implements the open-source M17 protocol for digital voice and data over amateur radio, compatible with OpenRTX firmware.

ESP32-S3 LoRa development board (hardware revision V1.3) with 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, WiFi, BLE 5.0, and support for SX1262/SX1276/SX1280/LR1121 radio modules at 433/868/915MHz a

ESP32 LoRa development board with a Temperature Compensated Crystal Oscillator (TCXO) for enhanced LoRa frequency stability, 0.96-inch SSD1306 OLED display, 4MB Flash, WiFi, BLE 4.2, TF card slot, and

STM32WL55CCU6 LoRa development board with dual Cortex-M4 + M0+ cores, built-in LoRa/FSK/MSK radio at 433/868/915MHz, 0.96-inch SSD1315 OLED, 256KB Flash, 64KB RAM, and open-source Arduino/STM32CubeIDE

ESP32-S3 LoRa voice kit with MAX98357A speaker, MSM261S4030HOR microphone, vibration motor, RTC, 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, and SX1262/SX1276/SX1280 radio options — designed for LoR

Pre-built digital mode QRP transceiver for amateur radio, supporting FT8, FT4, JS8, and WSPR on HF bands from 160m to 6m with ~5W output, OLED display, and single USB-C cable operation.

ESP32-S3 based LoRa development board with built-in 0.96" OLED display, SX1262 LoRa transceiver, WiFi, BLE 5.0, USB-C, and LiPo battery charging. One of the most popular boards for Meshtastic.

Solar-powered nRF52840 + SX1262 LoRa dev board with integrated BMS supporting 1-4 cell lithium batteries, MPPT solar charging, and USB PD3.0. Designed for Meshtastic solar nodes.

High-power Meshtastic relay/repeater kit with nRF52840 + SX1262 LoRa, 18V/10W solar panel, 3x2800mAh battery pack, IP66 aluminum enclosure, and 5.5dBi fiberglass antenna.

Compact Meshtastic LoRa transceiver with nRF52840, SX1262, 1.54\" e-paper display, GPS, and 1200mAh battery for off-grid mesh communication.

Pocket-sized open-source LoRa mesh messenger with ESP32-S3, RFM95 radio, 2.8" IPS display, and 36-key QWERTY keyboard. Runs Meshtastic and CircuitPython firmware for off-grid text communication.

Compact Meshtastic-compatible LoRa communicator with push-button keyboard, built around the Heltec Wireless Tracker with ESP32-S3, SX1262 LoRa, GPS, and a 0.96" TFT display for off-grid mesh messaging

DIY encrypted LoRa communicator kit building a pair of devices for off-grid text messaging up to 2km range. Features ESP32, LLCC68 LoRa radio, and 160×128 TFT display.

Compact castellated ESP32-S3 development board with Semtech LR1121 multi-band LoRa transceiver supporting Sub-GHz and 2.4GHz bands, WiFi, BLE 5.0, and Meshtastic compatibility in a 41x21mm form factor

Ultra-compact ESP32-S3 + SX1262 LoRa module with stamp-hole design for direct PCB integration, supporting WiFi, BLE 5, and LoRa at 470-928MHz with deep sleep current under 10uA.

Compact ESP32-S3 + SX1262 LoRa development board with WiFi, BLE 5.0, and integrated battery management. Meshtastic and LoRaWAN compatible, with a slim stick form factor ideal for IoT sensor nodes and

Qi2 magnetic wireless charging power bank with integrated Meshtastic mesh networking node, featuring nRF52840 BLE + SX1262 LoRa radio and a 2.13" e-ink display. Available in 5000mAh and 10000mAh confi

Ultra-compact ESP32-C3 + SX1262 LoRa/LoRaWAN module with WiFi and BLE, designed for SMT integration into IoT devices. Features 10uA deep sleep, +21dBm TX power, and Meshtastic compatibility in a tiny

Compact ESP32-S3 development board with integrated SX1262 LoRa transceiver and 0.49-inch OLED display. Supports Meshtastic, LoRaWAN, WiFi, and BLE 5.0 in a breadboard-friendly form factor with battery

ESP32-S3 development board with 2.9-inch e-ink display and optional SX1262 LoRa radio, featuring Raspberry Pi GPIO header, Meshtastic support, and 18uA deep sleep for battery-powered IoT and mesh netw

Compact nRF52840 + SX1262 LoRa development board with BLE 5.0, optional 1.14" TFT display and L76K GPS module. Designed for Meshtastic mesh networking, LoRaWAN, and battery-powered IoT deployments wit