ESP32 (Xtensa LX6)

Ultra-compact ESP32 development board with W5500 SPI Ethernet, 0.96" OLED display, Wi-Fi, Bluetooth 4.2, and USB-C. Only 29.5×23mm for embedded IoT gateway projects.

LILYGO T-Micro32 Plus is an upgraded compact ESP32 module with 8MB flash, 2MB PSRAM, expanded GPIO, and an improved RED C3 ceramic antenna for stronger wireless performance.

Compact ESP32 development board combining a physical keyboard with a 1.14" IPS display, USB-C charging, multiple interfaces, and optional 2800mAh battery in shell configuration.

ESP32-based development board with SIM7600E-H 4G LTE Cat-4 modem, GPS, Wi-Fi, Bluetooth, 18650 battery holder with solar charging, and dual USB-C ports for high-speed IoT connectivity.

ESP32 development board with 4 onboard HRS4H-S-DC5V relays, 4MB flash, 8MB PSRAM, WiFi, BLE 4.2, and optocoupler-isolated GPIO expansion — designed for wireless remote switch control of AC/DC loads.

ESP32 development board with VGA video output, dual PS/2 ports for keyboard and mouse, 4MB flash, and the FabGL graphics library — a retro computing platform for VGA terminal emulators and classic gam

ESP32 development board combining 4-channel HX711 load cell amplifiers with LoRa SX1262 radio (868/915 MHz) for wireless weight measurement and IoT scale applications over long-range LoRa networks.

LILYGO T4 is an ESP32 development board with 8MB PSRAM, optional 2.2 or 2.4-inch ILI9341 TFT LCD display, Wi-Fi, Bluetooth 4.2 BLE, and Li-Po battery support.

ESP32 desktop gadget with a 1.54-inch transparent blue OLED display, IR receiver, touch control, Wi-Fi, and Bluetooth. Ships with factory firmware featuring a clock, games, and animations.

ESP32 development board with LAN8720 Ethernet, 16MB flash, 8MB PSRAM, WS2812 RGB LED, SIM/TF card slots, and T-PCIE expansion support for industrial IoT, wired networking, and CAN bus applications.

ESP32-WROVER development board with 0.96-inch OLED display, five-way directional button, single 18650 battery holder, 8MB PSRAM, WiFi, and BLE 4.2 — a compact handheld IoT controller in a slim form fa

LILYGO LoRa3 (T3 LoRa32 V1.6.1) is an ESP32 development board combining Wi-Fi, BLE, and LoRa radio (SX1276/SX1278) with OLED display and TF card slot for IoT and mesh networking.

Programmable ESP32 smartwatch with 1.3-inch round GC9A01 IPS touchscreen (240×240), BMA423 accelerometer, vibration motor, RTC, WiFi, and BLE 4.2 — open-source and fully programmable with Arduino or M

Compact ESP32 development board (Mini32 form factor) with 4MB Flash, WiFi 802.11 b/g/n, Bluetooth 4.2, CH340C USB-to-serial, TP4054 LiPo charger, and 1.25mm JST battery connector — a classic breadboar

LILYGO LoRa V1.3 is an ESP32 development board with SX1276 LoRa radio at 868/915 MHz, optional 0.96-inch OLED display, Wi-Fi, BLE, and 4MB flash for IoT and LoRa applications.

Updated ESP32 Mini32 development board with 8MB PSRAM, 4/16MB Flash options, dual-core 240MHz, CH9102 USB-serial, WiFi, BLE 4.2, and 1.25mm JST LiPo connector in a 40×31mm breadboard-friendly footprin

ESP32 development board with integrated 0.96-inch SSD1306 OLED display, 4MB Flash, 520KB SRAM, WiFi, Bluetooth dual-mode, USB-C, and onboard LiPo battery charging for compact IoT display projects.

Open-source ESP32-based ventilation controller for Ducobox Silent/Focus and Orcon MVS-15xx systems with optional CO2, humidity, VOC, and NOx sensors, fully compatible with ESPHome and Home Assistant.

ESP32 LoRa development board with a Temperature Compensated Crystal Oscillator (TCXO) for enhanced LoRa frequency stability, 0.96-inch SSD1306 OLED display, 4MB Flash, WiFi, BLE 4.2, TF card slot, and

ESP32 development board with SIM7600 LTE Cat-4 modem (150Mbps DL), GPS, 18650 battery holder with solar charging interface, and dual USB-C ports for high-speed cellular IoT applications.

ESP32 development board with SIM800L 2G GSM/GPRS cellular modem, Wi-Fi, Bluetooth 4.2, USB-C charging, and Li-Po battery connector for IoT devices requiring SMS and GPRS data connectivity.

ESP32 module with built-in Ethernet (LAN8720A PHY), WiFi, and Bluetooth. Designed for wired IoT applications, gateways, and industrial automation where reliable network connectivity is essential.

ESP32-based dual-relay WiFi/BLE smart switch with per-channel power monitoring via ADE7953, cover/shutter control mode, and 10A per channel. Flashable with Tasmota for local roller blind and dual ligh

ESP32-based WiFi smart switch with high-accuracy power monitoring via CSE7766, 16A relay, LCD display, and DIN-rail mounting. Flashable with Tasmota for local energy tracking and home automation.

ESP32-based dual-relay WiFi smart switch with per-channel power monitoring, roller shutter mode, and 2×10A outputs. Ideal for motorized blinds with Tasmota shutter calibration and position tracking.