Wearable

Ultra-compact ESP32-S3 board with a 0.85-inch GC9107 IPS display (128×128), 2MB PSRAM, WiFi, BLE 5.0, and USB-C — one of the smallest ESP32-S3 development boards available.

Programmable ESP32 smartwatch with 1.54-inch touch IPS display, BMA423 accelerometer, PCF8563 RTC, PDM microphone, speaker, IR transmitter, and vibration motor — fully open-source and Arduino/MicroPyt

ESP32-S3 board with 1.91-inch RM67162 AMOLED display (240×536), optional touch, 16MB flash, 8MB PSRAM, and USB-C — delivering vivid OLED visuals for IoT dashboards and smart displays.

ESP32-S3 development board with a 1.64" ICNA3311 AMOLED display at 280×456 resolution, 16MB Flash, 8MB PSRAM, Wi-Fi and Bluetooth 5 LE connectivity.

Compact ESP32-S3 development board featuring a 1.47" RM67162 AMOLED display with QSPI interface, 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and battery charging support.

Compact ESP32-C3 keyboard terminal with a built-in 0.99" display, Wi-Fi, Bluetooth 4.2, 400mAh battery, and a 3D-printed shell for portable wireless input applications.

LILYGO T-Wrist E-Paper is an ESP32-based wearable development board with a 1.54-inch 200×200 e-paper display, vibration motor, optional GPS (LG77 GNSS), WiFi, Bluetooth 4.2, and 3D-printable watch she

LILYGO T-Micro32 V2.0 is a 45%-smaller ESP32 PICO-D4 module with integrated IPEX antenna connector, designed for space-constrained embedded product designs.

LILYGO T-Mini E-Paper S3 is a compact ESP32-S3 board with a 1.02-inch 128×80 e-paper display, 4MB flash, 2MB PSRAM, WiFi, BLE 5, TF card slot, and support for 18350 battery. Available in 868MHz and 91

LILYGO T-Micro32 S3 is an ultra-compact ESP32-S3FH4R2 module with Wi-Fi, BLE 5.0, 4MB flash, 2MB PSRAM, and dual-core Xtensa LX7 processor in a minimal footprint.

Programmable ESP32 smartwatch with 1.3-inch round GC9A01 IPS touchscreen (240×240), BMA423 accelerometer, vibration motor, RTC, WiFi, and BLE 4.2 — open-source and fully programmable with Arduino or M

Compact breakout board for the Bosch BHI260AP AI-powered IMU, featuring a 6-axis accelerometer and gyroscope with an onboard programmable AI neural network co-processor for motion pattern recognition

Breakout module for the InvenSense ICM-20948 9-axis MEMS IMU, combining a 3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer with an onboard Digital Motion Processor for real-time motion

Ultra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD (128x128), 6-axis IMU, 8MB flash, Wi-Fi, BLE 5.0, USB-C, and Grove port. Ideal for IoT prototyping and embedded UI projects.

Ultra-compact ESP32-S3 development board with OV2640 camera, digital microphone, 8MB PSRAM, 8MB flash, WiFi 802.11 b/g/n, BLE 5.0, extended GPIO, and battery charging — ideal for AI and IoT edge proje

Ultra-compact ESP32-PICO dev board (24x24mm) with 5x5 RGB LED matrix, 6-axis IMU (MPU6886), IR LED, programmable button, and Grove port. Perfect for LED displays and motion sensing.

Ultra-compact ESP32-S3 dev board (24x24mm) by M5Stack without display. Features WiFi, BLE 5.0, 8MB flash, Grove port, RGB LED, button, and USB-C in a tiny enclosure for IoT and embedded projects.

6-axis inertial measurement unit combining a 3-axis accelerometer (±2/4/8/16g) and 3-axis gyroscope (±250-2000°/s) with onboard DMP. I2C interface, 3.3V/5V.

A stretchable, wearable multi-channel EEG electrode band by Upside Down Labs for recording brain signals. Available in 2-channel and 6-channel variants, it connects to BioAmp EXG Pill for brain-comput

DIY smartwatch kit powered by ESP32 with ST7735S display, 6-axis IMU, Bluetooth connectivity, and programmable via CircuitBlocks visual coding environment.

NASA-themed programmable smartwatch powered by ESP32-S3 with BLE 5.0, 6-axis IMU, ST7735S display, and activity tracking. Pre-assembled and ready to code.

Ultra-compact Arduino Leonardo-compatible microcontroller board with ATmega32U4, integrated lithium battery charging, and native USB in a tiny 22x20.5mm form factor.

Coin-sized ESP32-C3 RISC-V IoT development board with WiFi, BLE 5.0, integrated LiPo charging, 13 GPIO pins, and USB-C in a 25x20.5mm form factor.

Compact ESP32 dual-core development board with WiFi, Bluetooth 4.2, sewable I/O pads, and wearable-friendly 35x34mm form factor for IoT and e-textile projects.

Ultra-affordable RP2350 dual-architecture development board with switchable ARM Cortex-M33 / RISC-V cores, LiPo charging, 11 GPIO pins, and USB-C in a 25x20.5mm package.

Ultra-compact Arduino Uno-compatible board with BLE 4.0 (CC2540), ATmega328P, sewable gold-plated I/O pads, and wireless programming in a 28.8x33.1mm wearable form factor.

Low-power Arduino-compatible board with ATmega328P and Dialog BLE 4.1 chip, featuring 14 digital I/O, 6 analog inputs, wireless OTA programming, 25uA deep sleep, onboard LiPo charging, and dual interr

Coin-sized (25×20.5mm) ESP32-C6 wearable dev board with WiFi 6, BLE 5, Thread, Zigbee, Matter, integrated LiPo charger, and 14µA deep sleep — for $4.90.

Thumb-sized (21×17.8mm) Matter/Thread/Zigbee/WiFi 6/BLE 5.3 dev board with dual RISC-V cores, onboard antenna, 15µA deep sleep, and hardware security — for ~$5.

Ultra-compact open-source Linux SBC by BeagleBoard.org, powered by the TI AM625 SoC with 512MB LPDDR4, USB-C OTG, and microSD — designed for deeply embedded projects where minimal size matters.

ARM Cortex-M0+ dev board with Bluetooth LE (nRF51822) in the compact Feather form factor. Features 256KB flash, 32KB RAM, native USB, and a built-in LiPo charger for wireless wearable and IoT projects

All-in-one ATmega32u4 learning board with 10 NeoPixels, LIS3DH accelerometer, microphone, speaker, light and temperature sensors, and 8 capacitive touch pads in a circular 2-inch form factor.

Handheld gaming console and dev board powered by ATSAMD51J19 (120MHz Cortex-M4F) with a 1.8" TFT display, 5 NeoPixels, accelerometer, and Feather-compatible headers. Runs MakeCode Arcade, CircuitPytho

Coin-sized wearable microcontroller board with ATSAMD21E18 Cortex M0+ at 48MHz, 3 I/O sew pads, built-in RGB DotStar LED, and CircuitPython pre-installed. Designed for e-textiles and wearable projects

Tiny RP2040-based dev board in the QT Py / Seeed XIAO form factor, featuring 8MB flash, USB-C, a NeoPixel, and a STEMMA QT connector for solderless I2C sensor wiring.

ESP32-S2 Feather-format board by Unexpected Maker with 4MB flash, 2MB PSRAM, 5×5 RGB LED matrix, LiPo charging, and STEMMA QT — designed for colorful wearable and IoT projects.

Round, sewable Arduino-compatible wearable platform with ATmega32u4, native USB, NeoPixel, JST battery connector, and alligator-clip-friendly pads in a 45mm diameter form factor.

RP2040 Feather board with 8 consecutive 5V-level-shifted PIO outputs dedicated to NeoPixel LED strip control, 8MB flash, USB-C, and LiPo charging.

Skull-shaped ATSAMD51J19 dev board (120MHz Cortex-M4F) with a 1.54" 240×240 IPS TFT, 4 capacitive touch inputs, 4 NeoPixels, accelerometer, speaker driver, and LiPoly charging. Perfect for Halloween p

Pocket-sized educational microcontroller with nRF51822, 5×5 LED matrix, accelerometer, magnetometer, Bluetooth LE, 2 buttons, and 19 I/O pins. Designed for teaching coding to children and beginners vi

Round educational microcontroller with Nordic nRF52840 (64MHz Cortex-M4F + BLE), 10 NeoPixels, accelerometer, microphone, light sensor, speaker, 8 alligator-clip I/O pads, and USB. Runs CircuitPython,

Smallest official Arduino with native USB, based on ATmega32u4 at 16 MHz. Breadboard-friendly at 48×18mm with 20 I/O pins, 12 analog inputs, and USB HID/CDC emulation capability.

Ultra-compact ESP32-S2 development board by Unexpected Maker in the TinyPICO form factor, with 4 MB flash, 2 MB PSRAM, native USB, WiFi, and LiPo charging at just 17.8 × 41 mm.

Tiny 27mm round sewable wearable microcontroller with ATtiny85 at 8 MHz, 3 GPIO, Micro USB programming, 3.3V power, and reverse-polarity protection — ideal for small LED and NeoPixel wearable projects

Bluetooth 5.0 LE Feather board with nRF52832 ARM Cortex M4F at 64MHz, 512KB flash, 64KB SRAM, Apache Mynewt bootloader, SWD debug port, and built-in LiPo charging. For advanced BLE 5.0 open-source app

Tiny 27×15mm Arduino-compatible microcontroller board with ATtiny85 at 8 MHz, 3.3V logic, 8KB flash, 3 GPIO pins, and Micro USB programming for minimal space-constrained projects.

Tiny 31×15mm Arduino-compatible microcontroller with ATtiny85 at 8–16 MHz, 5V logic, 8KB flash, 3 GPIO pins, and Micro USB — the 5V variant for interfacing with 5V sensors and NeoPixel LEDs.

Tiny breadboard-friendly Bluetooth LE board with Nordic nRF52840 Cortex-M4F @ 64MHz, 1MB Flash, 256KB RAM, 2MB QSPI Flash, 21 GPIO, and native USB — all in a 36×17.6mm footprint. Supports CircuitPytho

Ultra-compact 3.3V Arduino-compatible board with ATmega32u4 at 8MHz, native USB HID, 23 GPIO pins, 2KB RAM, 28KB flash, and Micro USB. Measures 35mm × 17mm — smaller than a Feather with equivalent AVR

Sensor-rich BLE Feather with Nordic nRF52840 (64MHz Cortex-M4F), 6 onboard sensors (9-DoF IMU, magnetometer, proximity/light, PDM mic, humidity, barometric pressure), 21 GPIO, and FCC/IC/TELEC certifi

Ultra-compact 5V Arduino-compatible board with ATmega32u4 at 16MHz, native USB HID, 23 GPIO pins, 2KB RAM, 28KB flash, and Micro USB. Measures 35mm × 18mm — small form factor with full Arduino Leonard

Compact ATmega328P-based Arduino-compatible board at 16 MHz, 5V, with 28KB flash, 18 GPIO, Micro USB, FTDI header, and mounting holes — a miniaturized UNO with battery-friendly power management.

The FeatherS3[D] is Unexpected Maker's Feather-form ESP32-S3 board with a dual antenna system (onboard + u.FL, software-switchable), I2C battery fuel gauge, 16MB flash, 8MB PSRAM, two STEMMA QT connec

Child-oriented ESP32-S2 dev board with 4MB flash, 2MB PSRAM, 5 NeoPixels, microSD, I2S audio amplifier for speakers, USB-C, STEMMA QT, and AA battery or USB-C power support.

Ultra-compact ESP32-S3 board by Unexpected Maker in TinyPICO form factor with u.FL external antenna connector, 8MB flash, 8MB PSRAM, LiPo charging, and dual-core 240 MHz.

The TinyS3[D] is Unexpected Maker's ultra-compact ESP32-S3 board in the TinyPICO form factor, featuring a dual antenna system (onboard + u.FL, software-switchable), I2C battery fuel gauge, 8MB flash,

Unexpected Maker's pro ESP32-S3 Feather board with u.FL external antenna connector, 16MB flash, 8MB PSRAM, dual STEMMA QT connectors, LiPo charging, and dual 700mA regulators.

Bare WiFi module with Espressif ESP32-S2 single-core Xtensa LX7 @ 240MHz, 4MB Flash, 2MB PSRAM, 802.11b/g/n, native USB 1.1 OTG, and SMD pads. Intended for integration onto custom PCBs, not a standalo

Compact 3.3V CircuitPython/Arduino board with ATSAMD21G18 Cortex M0+ at 48MHz, 32KB RAM, 256KB flash, 2MB SPI flash, 23 GPIO with 11 analog inputs, RGB DotStar LED, native USB. Measures 36mm × 18mm.

Bare WiFi module with ESP32-S2 Xtensa LX7 @ 240MHz, 4MB Flash, 2MB PSRAM, 802.11b/g/n, native USB OTG, and a uFL connector for an external antenna. Drop-in variant of the WROVER for improved RF range.

Feather-format ESP32-S3 dual-core 240 MHz board with 8 MB flash, native USB-C, BLE, WiFi, STEMMA QT, LiPoly charging, and MAX17048 — no PSRAM variant for leaner memory budgets.

Tiny Seeed XIAO-compatible ESP32-S2 dev board with 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, WiFi, 13 GPIO, and 10 ADC inputs — no Bluetooth, all in a 21.8 × 17.9 mm footprint.

Espressif official ESP32-S2-WROVER development board with dual 20-pin headers (breadboard-friendly), 8MB Flash, 2MB PSRAM, WiFi, dual Micro-USB (native USB + UART bridge), NeoPixel RGB LED, and boot/r

Feather-format ATmega32u4 board at 8 MHz, 3.3V with LiPo charging, native USB, onboard prototyping area, 20 GPIO, JST battery connector, and 100mA integrated charger — all in 51×23mm.

Skull-shaped wearable microcontroller with ATSAMD21G18 at 48MHz, 1.44" 128x128 TFT display, 3-axis accelerometer, light sensor, 4 capacitive touch pads, 2W speaker driver, 8MB SPI flash, and LiPo char

QT Py-sized ESP32-S2 dev board with a uFL connector for an external 2.4 GHz antenna, 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, and 13 GPIO — for improved WiFi range.

All-in-one ATSAMD21 learning board with 10 NeoPixels, LIS3DH accelerometer, MEMS microphone, speaker with class D amp, IR transmit/receive, 7 capacitive touch pads, and 2MB SPI flash for CircuitPython

Low-cost credit card-sized gaming/badge board with ATSAMD51J19 at 120MHz, 1.8\" 160x128 TFT, 8 game buttons, 1 NeoPixel, light sensor, buzzer, 2MB SPI flash, and MicroSD. Supports MakeCode Arcade, Cir

Full-featured ESP32-S2 Feather-compatible board by Unexpected Maker with 16MB Flash, 8MB QSPI PSRAM, WiFi, native USB-C, 21 GPIO, STEMMA QT, APA102 RGB LED, ambient light sensor, and dual 700mA LDOs.

QT Py-sized classic ESP32 board with ESP32-PICO-V3-02, 8 MB flash, 2 MB PSRAM, WiFi, dual-core, Bluetooth Classic + BLE, STEMMA QT, and 13 GPIO — without native USB.

ESP32-S3 Feather board with 8MB flash, w.FL external antenna connector (MHF3/IPEX3), native USB-C, MAX17048 battery monitor, LiPo charging, NeoPixel, and STEMMA QT.

Ultra-compact ESP32-S3 dev board by Unexpected Maker in the TinyPICO form factor — dual-core 240 MHz LX7, 8 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 17 GPIO, LiPo charging at 35 × 17.8 mm.

Compact ItsyBitsy-format ESP32 board with 8MB flash, 2MB PSRAM, PCB antenna, Wi-Fi + Bluetooth Classic + BLE, 20 GPIO, NeoPixel, STEMMA QT, and Micro-B USB.

Pro ESP32-S3 Feather-form-factor board by Unexpected Maker — dual-core 240 MHz LX7, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 21 GPIO, 2× STEMMA connectors, dual LDOs, LiPo charging.

Compact ItsyBitsy-format ESP32 board with 8MB flash, 2MB PSRAM, w.FL external antenna connector, Wi-Fi + Bluetooth Classic + BLE, 20 GPIO, NeoPixel, STEMMA QT, and Micro-B USB.

Upgraded BBC micro:bit with Nordic nRF52833 Cortex-M4F, Bluetooth 5.1, 5×5 LED matrix, 2 buttons, capacitive touch logo, built-in speaker and MEMS microphone, edge connector, and low-power mode. Same

Unexpected Maker's ultimate ESP32-S3 dev board — dual-core 240 MHz LX7, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 27 GPIO, 2× LDOs, castellated headers, STEMMA, LiPo charging, JTAG.

Feather-format ATmega32u4 board with integrated nRF51822 Bluetooth LE, LiPo charging, native USB, 20 GPIO, and over-the-air firmware updates — an all-in-one BLE development board for iOS and Android c

The Adafruit Monster M4SK is a wearable dual-display Halloween mask board powered by ATSAMD51 Cortex-M4F at 120MHz with 8MB flash, two 240×240 IPS TFT eye displays, stereo audio, microphone, STEMMA co

Tiny RISC-V ESP32-C3 dev board in the QT Py / Seeed XIAO footprint with 4 MB flash, WiFi, BLE 5 with Mesh, STEMMA QT, 13 GPIO, 5 ADC inputs, and USB-C — no native USB.

32-bit ARM Cortex-M0+ Arduino in UNO form factor with ATSAMD21G18 at 48 MHz, 256KB flash, 32KB SRAM, onboard EDBG debugger, dual USB ports, 12-bit ADC/DAC — designed for IoT, wearables, and robotics.

Tiny dual-core ESP32-S3 dev board in the QT Py / Seeed XIAO footprint — 8 MB flash, WiFi, BLE 5, native USB-C, STEMMA QT, 13 GPIO, 10 ADC inputs, no PSRAM variant.

Feather board with nRF52840 ARM Cortex-M4F at 64MHz, BLE 5.0, native USB (CDC/HID/MIDI/MSC), 1MB flash, 256KB SRAM, 2MB QSPI flash, 21 GPIO, SWD debug, and LiPo charging. Supports Arduino and CircuitP

Feather-format ESP32-S3 board with 4 MB flash and 2 MB PSRAM, dual-core 240 MHz, native USB-C, BLE 5, WiFi, STEMMA QT, LiPoly charging, and MAX17048 battery monitor.

Credit card-sized gaming and badge board with ATSAMD51J19 at 120MHz, 1.8\" 160x128 TFT, 8 game buttons, 5 NeoPixels, LIS3DH accelerometer, light sensor, 2W speaker, 2MB SPI flash, Feather headers, STE

Feather-form-factor board with Raspberry Pi RP2040 dual-core Cortex-M0+ @ 133MHz, 264KB SRAM, 8MB Flash, 21 GPIO, 4 ADC, 2 PIO peripherals, USB-C with UF2 bootloader, STEMMA QT, and LiPo charging. Run

Tiny 36×18mm breadboard-friendly board with Raspberry Pi RP2040 dual-core Cortex-M0+ @ 133MHz, 264KB SRAM, 8MB Flash, 23 GPIO, 4 ADC, 2 PIO peripherals, and Micro-USB. Runs CircuitPython and MicroPyth

nRF52832 ARM Cortex-M4F Feather board with native Bluetooth 5 LE at 64 MHz, 512KB flash, 64KB RAM, 8 analog inputs, 12 PWM channels, and built-in LiPo charger. FCC/IC/TELEC certified for production BL

Ultra-compact ATSAMD21E18 ARM Cortex-M0+ board at 48 MHz with 256KB flash, 32KB RAM, 5 GPIO pins, built-in RGB DotStar LED, capacitive touch, native USB, and CircuitPython support. Weighs just 1.4g in

Ultra-compact ESP32 development board in the ItsyBitsy form factor with WiFi, Bluetooth Classic + BLE, USB-C, and LiPo charging — perfect for space-constrained wireless projects.

Sensor-packed Nano board with nRF52840 ARM Cortex-M4F at 64MHz, BLE 5.0, 9-axis IMU, microphone, temperature, humidity, pressure, light, and gesture sensors — designed for TinyML and edge AI projects

Tiny 22.86mm AI voice module with nRF52840 BLE 5.0, Syntiant NDP120 neural decision processor, MEMS microphone, 6-axis IMU, and magnetometer — runs always-on voice recognition and audio anomaly detect

Compact 22.86mm sensor module with nRF52840 BLE 5.0 and four Bosch sensors — 9-axis IMU with AI, barometric pressure, temperature/humidity, and gas/CO2 detection. Edge AI-powered environmental and mot