Data Logging

Enhanced ESP32-S3 AMOLED development board with 1.91" RM67162 display, onboard RTC, PMU, SD card slot, capacitive touch, metal shielding, and external FPC antenna.

Compact ESP32 development board combining a physical keyboard with a 1.14" IPS display, USB-C charging, multiple interfaces, and optional 2800mAh battery in shell configuration.

ESP32-S3 development board with an elongated 3.4" capacitive touch TFT LCD (180×640 resolution), 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and optional enclosure variant.

Open-source flight controller board with RP2350B MCU, 10-DOF sensor suite (gyro, accelerometer, barometer, magnetometer), INA226 battery monitor, microSD with 4-bit SDIO, and DC-DC converter. 50.7x41.

Open-source ESP32 Teleinfo reader board for French Linky energy meters. Pre-flashed with Tasmota, features USB-C, WiFi, QWIIC I2C port, and RGB LED. Reads both Standard and Historique TIC formats.

Open-source ESP32-S3 camera board with PoE, microSD, and Stemma QT designed for AI-powered utility meter reading using the AI-on-the-edge-device firmware with TensorFlow Lite inference.

6-axis inertial measurement unit combining a 3-axis accelerometer (±2/4/8/16g) and 3-axis gyroscope (±250-2000°/s) with onboard DMP. I2C interface, 3.3V/5V.

16-bit 4-channel analog-to-digital converter module with programmable gain amplifier (PGA, up to 16x). I2C interface, 860 SPS max. Ideal for precision analog measurements.

ESP32-S3 based data logging board with DS3231 RTC, microSD card slot, dual STEMMA/Qwiic connectors, and LiPo charging. Achieves ~21µA deep sleep current. Open source hardware with Arduino and CircuitP

Open-source ESP32 development board with built-in Ethernet, Power-over-Ethernet support, micro-SD card slot, and LiPo battery connector. Ideal for wired Tasmota nodes and industrial IoT applications.

Compact, low-power ARM Cortex-M0+ development board with ATSAMD21G18 MCU, 16MB SPI flash, USB-C, WS2812 RGB LED, and FPC display connector, ideal for IoT and low-power applications.

A compact USB-A development board and debugging tool built around the RP2040 dual-core Cortex-M0+ MCU, featuring a 1.14-inch IPS LCD, microSD card slot, and exposed SWD, UART, and I2C connectors for p

Compact USB-A dongle development board with ESP32-C6 RISC-V MCU, 1.14\" IPS LCD, WiFi 6, BLE 5.0, Zigbee 3.0, Thread, and microSD slot for portable IoT projects.

Feather-format ATSAMD21 ARM Cortex-M0+ board at 48 MHz, 3.3V with 256KB flash, 32KB RAM, LiPo charging, native USB, 12-bit ADC/DAC, and RTC crystal — lightweight and CircuitPython-capable.

Feather-format ATSAMD21 ARM Cortex-M0+ data logger at 48 MHz, 3.3V with microSD slot, 256KB flash, 32KB RAM, LiPo charging, native USB, and 12-bit ADC — 32-bit power for field data collection.

Arduino Leonardo-compatible IoT board with WIZnet W5500 hardwired TCP/IP Ethernet (10/100Mbps), 802.3af PoE power input, ATmega32u4 MCU, 20 digital I/O pins, and 6 analog inputs for wired IoT applicat

A Raspberry Pi Zero form-factor development board based on the RP2040 dual-core Cortex-M0+ MCU with 16MB flash, Mini HDMI (DVI) output via PIO bitbanging, USB-C, PIO-USB host port, microSD card slot,

A compact RP2040-based module with Bluetooth 5.1 dual-mode (BLE + Classic SPP) connectivity, 2MB flash, 14 GPIO pins, ceramic antenna, and castellated edge design for embedded Bluetooth applications.

High-performance Arduino-compatible board powered by the NXP iMX RT1011 Cortex-M7 at 500 MHz, with 8MB QSPI flash, microSD slot, STEMMA QT, and USB-C.

Arduino Uno-compatible development board powered by ATSAMD21G18 Cortex M0+ at 48MHz with 256KB flash, 32KB SRAM, 2MB SPI flash, and CircuitPython pre-loaded. Features Arduino shield compatibility and

Arduino UNO with built-in Ethernet and microSD slot based on the ATmega328P at 16 MHz — a self-contained board for networked Arduino projects without needing a separate Ethernet shield.

Hybrid Arduino/Linux board combining ATmega32U4 with a MIPS-based Linux SoC, 802.11bgn WiFi, Ethernet, USB host, and microSD — enabling cloud-connected Arduino sketches and over-the-air programming.

Arduino-Uno-compatible development board powered by the RP2040 with 16MB QSPI flash, microSD slot, STEMMA QT, onboard NeoPixel, USB-C, and an RX/TX switch for serial flexibility.

Feather-format ATmega32u4 data logger at 8 MHz, 3.3V with onboard microSD slot, LiPo charging, native USB, 20 GPIO, and 100mA charger — built for portable data logging applications.

Arduino-Uno-compatible board with RP2350, dual ARM Cortex-M33 at 150 MHz, 520KB SRAM, 16MB QSPI flash, microSD, HSTX port, 23 GPIO on headers, NeoPixel, STEMMA QT, and USB-C.

Arduino Uno-compatible board with ATSAMD51J19 Cortex M4F at 120MHz, ESP32 AirLift WiFi co-processor with TLS/SSL, 512KB flash, 192KB RAM, 2MB QSPI flash, 25 GPIO, dual DAC/ADC, and native USB. Arduino

Ultra-compact RISC-V development board with ESP32-C3FN4, WiFi, BLE 5.0, integrated battery management, and USB-C — ideal for low-power IoT sensor nodes and wireless prototyping.