# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**9 device listed.**

## Sonoff SNZB-01P

Zigbee 3.0 wireless button and scene switch with single, double, and long press actions. Battery-powered with CR2477 lasting up to 5 years. Works with Home Assistant, Zigbee2MQTT, and eWeLink.

[Details](https://openhardware.directory/devices/sonoff-snzb-01p) | [Markdown](https://openhardware.directory/devices/sonoff-snzb-01p/md)

## Adafruit GEMMA M0

Coin-sized wearable microcontroller board with ATSAMD21E18 Cortex M0+ at 48MHz, 3 I/O sew pads, built-in RGB DotStar LED, and CircuitPython pre-installed. Designed for e-textiles and wearable projects.

[Details](https://openhardware.directory/devices/adafruit-gemma-m0) | [Markdown](https://openhardware.directory/devices/adafruit-gemma-m0/md)

## Adafruit METRO M0 Express

Arduino Uno-compatible development board powered by ATSAMD21G18 Cortex M0+ at 48MHz with 256KB flash, 32KB SRAM, 2MB SPI flash, and CircuitPython pre-loaded. Features Arduino shield compatibility and native USB.

[Details](https://openhardware.directory/devices/adafruit-metro-m0-express) | [Markdown](https://openhardware.directory/devices/adafruit-metro-m0-express/md)

## PIC32 Pinguino

The PIC32 Pinguino is an open-source Arduino-form-factor development board based on the Microchip PIC32MX440F256H 32-bit processor at 80MHz, with industrial-grade power input, LiPo battery support, and UEXT expansion connector.

[Details](https://openhardware.directory/devices/pic32-pinguino) | [Markdown](https://openhardware.directory/devices/pic32-pinguino/md)

## Adafruit ItsyBitsy M0 Express

Compact 3.3V CircuitPython/Arduino board with ATSAMD21G18 Cortex M0+ at 48MHz, 32KB RAM, 256KB flash, 2MB SPI flash, 23 GPIO with 11 analog inputs, RGB DotStar LED, native USB. Measures 36mm × 18mm.

[Details](https://openhardware.directory/devices/adafruit-itsybitsy-m0-express) | [Markdown](https://openhardware.directory/devices/adafruit-itsybitsy-m0-express/md)

## Adafruit Feather M0 Basic Proto

Feather-format ATSAMD21 ARM Cortex-M0+ board at 48 MHz, 3.3V with 256KB flash, 32KB RAM, LiPo charging, native USB, 12-bit ADC/DAC, and RTC crystal — lightweight and CircuitPython-capable.

[Details](https://openhardware.directory/devices/adafruit-feather-m0-basic-proto) | [Markdown](https://openhardware.directory/devices/adafruit-feather-m0-basic-proto/md)

## Adafruit HalloWing M0 Express

Skull-shaped wearable microcontroller with ATSAMD21G18 at 48MHz, 1.44" 128x128 TFT display, 3-axis accelerometer, light sensor, 4 capacitive touch pads, 2W speaker driver, 8MB SPI flash, and LiPo charging.

[Details](https://openhardware.directory/devices/adafruit-hallowing-m0-express) | [Markdown](https://openhardware.directory/devices/adafruit-hallowing-m0-express/md)

## Adafruit Feather M0 Adalogger

Feather-format ATSAMD21 ARM Cortex-M0+ data logger at 48 MHz, 3.3V with microSD slot, 256KB flash, 32KB RAM, LiPo charging, native USB, and 12-bit ADC — 32-bit power for field data collection.

[Details](https://openhardware.directory/devices/adafruit-feather-m0-adalogger) | [Markdown](https://openhardware.directory/devices/adafruit-feather-m0-adalogger/md)

## Arduino Zero

32-bit ARM Cortex-M0+ Arduino in UNO form factor with ATSAMD21G18 at 48 MHz, 256KB flash, 32KB SRAM, onboard EDBG debugger, dual USB ports, 12-bit ADC/DAC — designed for IoT, wearables, and robotics.

[Details](https://openhardware.directory/devices/arduino-zero) | [Markdown](https://openhardware.directory/devices/arduino-zero/md)