# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**8 device listed.**

## DFRobot Beetle CM-32U4

Ultra-compact Arduino Leonardo-compatible microcontroller board with ATmega32U4, integrated lithium battery charging, and native USB in a tiny 22x20.5mm form factor.

[Details](https://openhardware.directory/devices/dfrobot-beetle-cm-32u4) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-cm-32u4/md)

## DFRobot Beetle ESP32-C3

Coin-sized ESP32-C3 RISC-V IoT development board with WiFi, BLE 5.0, integrated LiPo charging, 13 GPIO pins, and USB-C in a 25x20.5mm form factor.

[Details](https://openhardware.directory/devices/dfrobot-beetle-esp32-c3) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-esp32-c3/md)

## DFRobot Beetle ESP32

Compact ESP32 dual-core development board with WiFi, Bluetooth 4.2, sewable I/O pads, and wearable-friendly 35x34mm form factor for IoT and e-textile projects.

[Details](https://openhardware.directory/devices/dfrobot-beetle-esp32) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-esp32/md)

## DFRobot Beetle BLE

Ultra-compact Arduino Uno-compatible board with BLE 4.0 (CC2540), ATmega328P, sewable gold-plated I/O pads, and wireless programming in a 28.8x33.1mm wearable form factor.

[Details](https://openhardware.directory/devices/dfrobot-beetle-ble) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-ble/md)

## DFRobot Beetle Board

The original coin-sized Arduino Leonardo-compatible board with ATmega32U4, native USB, 10 digital and 5 analog pins, and sewable gold-plated pads in a 20x22mm form factor.

[Details](https://openhardware.directory/devices/dfrobot-beetle-board) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-board/md)

## Adafruit GEMMA M0

Coin-sized wearable microcontroller board with ATSAMD21E18 Cortex M0+ at 48MHz, 3 I/O sew pads, built-in RGB DotStar LED, and CircuitPython pre-installed. Designed for e-textiles and wearable projects.

[Details](https://openhardware.directory/devices/adafruit-gemma-m0) | [Markdown](https://openhardware.directory/devices/adafruit-gemma-m0/md)

## Adafruit FLORA v3

Round, sewable Arduino-compatible wearable platform with ATmega32u4, native USB, NeoPixel, JST battery connector, and alligator-clip-friendly pads in a 45mm diameter form factor.

[Details](https://openhardware.directory/devices/adafruit-flora-v3) | [Markdown](https://openhardware.directory/devices/adafruit-flora-v3/md)

## Adafruit GEMMA v2

Tiny 27mm round sewable wearable microcontroller with ATtiny85 at 8 MHz, 3 GPIO, Micro USB programming, 3.3V power, and reverse-polarity protection — ideal for small LED and NeoPixel wearable projects.

[Details](https://openhardware.directory/devices/adafruit-gemma-v2) | [Markdown](https://openhardware.directory/devices/adafruit-gemma-v2/md)