# device — Open Hardware Directory > **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link. **248 device listed.** ## LILYGO T-Deck Plus ESP32-S3 handheld dev board with QWERTY keyboard, trackball, 2.8" IPS LCD, LoRa SX1262, GPS, speaker, dual microphones, and 2000mAh battery in an ABS case. [Details](https://openhardware.directory/devices/lilygo-t-deck-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-deck-plus/md) ## LILYGO T3 LoRa32 V1.6.1 ESP32-PICO-D4 development board with LoRa SX1276/SX1278 radio, 0.96\" SSD1306 OLED, microSD slot, WiFi, Bluetooth 4.2, and LiPo battery support in a compact 66×36mm form factor. [Details](https://openhardware.directory/devices/lilygo-t3-lora32-v1-6-1) | [Markdown](https://openhardware.directory/devices/lilygo-t3-lora32-v1-6-1/md) ## LILYGO T5 E-Paper S3 Pro Lite A pocket-sized ESP32-S3 development board with a 4.7-inch capacitive touchscreen e-paper display (960×540, 16 grayscale), anti-glare glass, warm-toned backlight, MagSafe wireless charging, and comprehensive battery management. [Details](https://openhardware.directory/devices/lilygo-t5-e-paper-s3-pro-lite) | [Markdown](https://openhardware.directory/devices/lilygo-t5-e-paper-s3-pro-lite/md) ## LILYGO T-Watch S3 Open-source ESP32-S3 smartwatch with LoRa, 1.3" 240×240 IPS touchscreen, haptic feedback, accelerometer, speaker, microphone, IR transmitter, and 1500mAh battery. Supports Meshtastic, ESPHome, Arduino, and MicroPython. [Details](https://openhardware.directory/devices/lilygo-t-watch-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-s3/md) ## LILYGO T-Display Compact ESP32-PICO-D4 development board with integrated 1.14-inch ST7789V IPS LCD (135×240, 260 PPI), WiFi, Bluetooth 4.2/BLE, and Arduino/MicroPython support. [Details](https://openhardware.directory/devices/lilygo-t-display) | [Markdown](https://openhardware.directory/devices/lilygo-t-display/md) ## LILYGO T-Beam ESP32 development board combining LoRa radio (SX1276/SX1278), u-blox NEO-6M GPS, 0.96" OLED display, and 18650 battery support — the go-to board for Meshtastic and LoRa tracking projects. [Details](https://openhardware.directory/devices/lilygo-t-beam) | [Markdown](https://openhardware.directory/devices/lilygo-t-beam/md) ## LILYGO T-Display S3 ESP32-S3 development board with 1.9-inch ST7789V TFT display (170×320), optional capacitive touch, 16MB flash, 8MB PSRAM, and USB-C. Popular for smart displays and IoT dashboards. [Details](https://openhardware.directory/devices/lilygo-t-display-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3/md) ## LILYGO T-SIM7000G ESP32 board with SIMCom SIM7000G multi-band LTE-M/NB-IoT modem, GPS, 8MB PSRAM, USB-C, and 18650 battery support — designed for global cellular IoT deployments. [Details](https://openhardware.directory/devices/lilygo-t-sim7000g) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim7000g/md) ## LILYGO T-Watch 2020 V3 Programmable ESP32 smartwatch with 1.54-inch touch IPS display, BMA423 accelerometer, PCF8563 RTC, PDM microphone, speaker, IR transmitter, and vibration motor — fully open-source and Arduino/MicroPython programmable. [Details](https://openhardware.directory/devices/lilygo-t-watch-2020-v3) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-2020-v3/md) ## LILYGO T-Higrow ESP32 plant sensor board with capacitive soil moisture, soil fertility, BH1750 light sensor, and DHT11/BME280 temperature/humidity — WiFi-connected smart plant care for gardens and greenhouses. [Details](https://openhardware.directory/devices/lilygo-t-higrow) | [Markdown](https://openhardware.directory/devices/lilygo-t-higrow/md) ## LILYGO T-QT Pro Ultra-compact ESP32-S3 board with a 0.85-inch GC9107 IPS display (128×128), 2MB PSRAM, WiFi, BLE 5.0, and USB-C — one of the smallest ESP32-S3 development boards available. [Details](https://openhardware.directory/devices/lilygo-t-qt-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-qt-pro/md) ## LILYGO T-Display S3 AMOLED ESP32-S3 board with 1.91-inch RM67162 AMOLED display (240×536), optional touch, 16MB flash, 8MB PSRAM, and USB-C — delivering vivid OLED visuals for IoT dashboards and smart displays. [Details](https://openhardware.directory/devices/lilygo-t-display-s3-amoled) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3-amoled/md) ## LILYGO T-Call SIM800 ESP32 board with SIM800L 2G GSM/GPRS modem for SMS alerts, voice calls, and cellular data — ideal for remote monitoring and IoT projects needing cellular fallback on a budget. [Details](https://openhardware.directory/devices/lilygo-t-call-sim800) | [Markdown](https://openhardware.directory/devices/lilygo-t-call-sim800/md) ## LILYGO T-Pico C3 Dual-MCU board combining RP2040 and ESP32-C3, with a 1.14-inch ST7789V display, WiFi, BLE 5.0, and Arduino/MicroPython support — bringing Raspberry Pi Pico connectivity to wireless IoT projects. [Details](https://openhardware.directory/devices/lilygo-t-pico) | [Markdown](https://openhardware.directory/devices/lilygo-t-pico/md) ## LILYGO T-Dongle S3 ESP32-S3 USB-A dongle with a 0.96-inch ST7735 color display (80×160), 16MB flash, WiFi, and BLE 5.0 — a compact plug-in development stick for IoT, media, and wireless sensor nodes. [Details](https://openhardware.directory/devices/lilygo-t-dongle-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-dongle-s3/md) ## LILYGO T-Embed ESP32-S3 all-in-one media board with 1.9-inch TFT display, rotary encoder, dual microphones, 1W speaker, 7 RGB LEDs, GROVE connector, and LiPo battery support — ideal for audio players and interactive IoT devices. [Details](https://openhardware.directory/devices/lilygo-t-embed) | [Markdown](https://openhardware.directory/devices/lilygo-t-embed/md) ## LILYGO T-RGB ESP32-S3 board with a circular 2.1\" or 2.8\" ST7701S RGB display (480×480) and capacitive touch — perfect for smart home controllers, round-display clocks, and interactive dashboards. [Details](https://openhardware.directory/devices/lilygo-t-rgb) | [Markdown](https://openhardware.directory/devices/lilygo-t-rgb/md) ## LILYGO T-Camera S3 ESP32-S3 camera development board with OV2640 2MP sensor, 0.96-inch OLED display, 16MB flash, 8MB PSRAM, WiFi, and BLE 5.0 — a ready-to-use platform for WiFi streaming cameras and computer vision projects. [Details](https://openhardware.directory/devices/lilygo-t-camera-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-camera-s3/md) ## LILYGO T-Internet-POE ESP32 board with LAN8720 10/100 Mbps Ethernet, Power-over-Ethernet (PoE 36–57V), WiFi, and BLE 4.2 — ideal for wired IoT gateways, industrial automation, and network-connected data loggers. [Details](https://openhardware.directory/devices/lilygo-t-internet-poe) | [Markdown](https://openhardware.directory/devices/lilygo-t-internet-poe/md) ## LILYGO T-Deck ESP32-S3 handheld terminal with 2.8-inch IPS display, mini QWERTY keyboard, trackball, optional SX1262 LoRa, speaker, and microphone — a self-contained portable communicator running Meshtastic and MeshCore. [Details](https://openhardware.directory/devices/lilygo-t-deck) | [Markdown](https://openhardware.directory/devices/lilygo-t-deck/md) ## LILYGO T-HMI ESP32-S3 HMI development board with a 2.8-inch resistive touchscreen, GROVE connectors, 16MB flash, 8MB PSRAM, and USB-C — designed for industrial HMI panels and interactive control interfaces. [Details](https://openhardware.directory/devices/lilygo-t-hmi) | [Markdown](https://openhardware.directory/devices/lilygo-t-hmi/md) ## LILYGO T-ETH-Lite Compact ESP32-S3 development board with wired Ethernet (W5500 SPI), WiFi, BLE, microSD slot, and optional PoE and camera shields for reliable networked IoT edge nodes. [Details](https://openhardware.directory/devices/lilygo-t-eth-lite) | [Markdown](https://openhardware.directory/devices/lilygo-t-eth-lite/md) ## LILYGO T-Watch Ultra Premium ESP32-S3 smartwatch development platform with 2.06" AMOLED touchscreen, LoRa SX1262, GNSS, NFC, MAX98357A audio, DRV2605 haptic, AXP2101 PMIC, and 1100mAh battery. [Details](https://openhardware.directory/devices/lilygo-t-watch-ultra) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-ultra/md) ## LILYGO T-Glass Wearable ESP32-S3 development board with 1.1" full-color AMOLED display in a glasses prism form factor, microphone, RTC, and touch button for head-up display applications. [Details](https://openhardware.directory/devices/lilygo-t-glass) | [Markdown](https://openhardware.directory/devices/lilygo-t-glass/md) ## LILYGO T-Display S3 Pro Upgraded T-Display S3 with a larger 2.33" IPS touchscreen, ESP32-S3R8, OTG charging via SY6970, QWIIC ports, ambient light/proximity sensor, and optional camera module expansion via POGOpin. [Details](https://openhardware.directory/devices/lilygo-t-display-s3-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3-pro/md) ## LILYGO T-TWR ESP32-S3 walkie-talkie development board with SA868 UHF/VHF radio module, 0.96" OLED display, rotary encoder, WiFi, BLE, and 18650 battery support for two-way radio projects. [Details](https://openhardware.directory/devices/lilygo-t-twr) | [Markdown](https://openhardware.directory/devices/lilygo-t-twr/md) ## LILYGO T-Beam Supreme Upgraded T-Beam with ESP32-S3FN8, QMI8658 6-axis IMU, LoRa SX1262, dual GPS options (L76K or u-blox), SoftRF firmware support, and multi-frequency bands for Meshtastic and aircraft tracking. [Details](https://openhardware.directory/devices/lilygo-t-beam-supreme) | [Markdown](https://openhardware.directory/devices/lilygo-t-beam-supreme/md) ## LILYGO T-Lora Pager Compact LoRa pager with ESP32-S3, 2.33" touchscreen, QWERTY keyboard, u-blox GNSS, BHI260AP AI IMU, ES8311 audio codec, RFID/NFC, and foldable antenna for off-grid messaging. [Details](https://openhardware.directory/devices/lilygo-t-lora-pager) | [Markdown](https://openhardware.directory/devices/lilygo-t-lora-pager/md) ## LILYGO T-Watch S3 Plus ESP32-S3 smartwatch dev board with LoRa SX1262, GNSS, BMA423 accelerometer, MAX98357A audio, DRV2605 haptic feedback, AXP2101 PMIC, and 940mAh battery for wearable LoRa projects. [Details](https://openhardware.directory/devices/lilygo-t-watch-s3-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-s3-plus/md) ## LILYGO T-Deck Pro ESP32-S3 keyboard terminal with 3.1" e-paper touchscreen, LoRa SX1262, GPS, BHI260AP AI IMU, PCM5102A/ES8311 audio, 1400mAh battery, and optional 4G LTE (A7682E) for off-grid terminal applications. [Details](https://openhardware.directory/devices/lilygo-t-deck-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-deck-pro/md) ## LILYGO T-TWR Plus Enhanced ESP32-S3 two-way radio board with SA868 UHF/VHF module, L76K GNSS, 1.3" OLED, AXP2102 PMIC, WS2812 RGB LED, TF card, and PPT button for APRS and walkie-talkie applications. [Details](https://openhardware.directory/devices/lilygo-t-twr-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-twr-plus/md) ## LILYGO T-Embed CC1101 ESP32-S3 multi-protocol RF tool with CC1101 sub-GHz transceiver (300–928 MHz), 13.56 MHz RFID, IR transmit/receive, 1.9" IPS display, and rotary encoder for RF analysis and replay attacks. [Details](https://openhardware.directory/devices/lilygo-t-embed-cc1101) | [Markdown](https://openhardware.directory/devices/lilygo-t-embed-cc1101/md) ## LILYGO T7 S3 Ultra-affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, USB 3.0, QWIIC/Stemma QT connector, power switch, and breadboard-compatible pinout at under $8. [Details](https://openhardware.directory/devices/lilygo-t7-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t7-s3/md) ## LILYGO T-CAN485 ESP32 development board with integrated CAN bus and RS-485 transceivers, TF card, WiFi, and BLE for industrial IoT, Modbus, and automotive OBD-II applications with 5–12V wide-range power input. [Details](https://openhardware.directory/devices/lilygo-t-can485) | [Markdown](https://openhardware.directory/devices/lilygo-t-can485/md) ## LILYGO T-Circle S3 Compact ESP32-S3 board with a 0.75" round 160×160 TFT LCD (GC9D01N), 16MB flash, 8MB PSRAM, WiFi, and BLE 5 for wearable watchface and circular display applications. [Details](https://openhardware.directory/devices/lilygo-t-circle-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-circle-s3/md) ## LILYGO T-Relay S3 ESP32-S3 board with 6 onboard relays, 16MB flash, 8MB PSRAM, WiFi, and BLE for ESPHome smart home automation, controlling lights, appliances, and HVAC systems. [Details](https://openhardware.directory/devices/lilygo-t-relay-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-relay-s3/md) ## LILYGO T-Energy S3 Affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, integrated 18650 battery holder, WiFi, and BLE 5.0 for battery-powered IoT sensor nodes under $10. [Details](https://openhardware.directory/devices/lilygo-t-energy-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-energy-s3/md) ## LILYGO T-Panel S3 Dual-MCU smart panel (ESP32-S3 + ESP32-H2) with 4" 480×480 IPS LCD (ST7701S), WiFi, BLE, native Zigbee/Thread/Matter via H2 co-processor, and optional RS485/CAN FD expansion for wall-mounted smart home controllers. [Details](https://openhardware.directory/devices/lilygo-t-panel-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-panel-s3/md) ## LILYGO T3 S3 ESP32-S3 LoRa development board with 0.96" OLED display, multiple LoRa module options (SX1262/SX1276/SX1280/LR1121), WiFi, BLE, and 18650 battery support for Meshtastic and IoT applications. [Details](https://openhardware.directory/devices/lilygo-t3-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t3-s3/md) ## LILYGO T-SIM7080G S3 ESP32-S3 development board with SIM7080G NB-IoT/LTE-M/GNSS module, 16MB flash, 8MB PSRAM, 18650 battery support, and USB-C connectivity for low-power IoT applications. [Details](https://openhardware.directory/devices/lilygo-t-sim7080g-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim7080g-s3/md) ## LILYGO T-Embed SI4732 ESP32-S3 board with SI4732-A10 AM/FM/SW/LW radio receiver, 1.9" IPS display, 900mAh battery, and rotary encoder for a portable software-defined radio experience. [Details](https://openhardware.directory/devices/lilygo-t-embed-si4732) | [Markdown](https://openhardware.directory/devices/lilygo-t-embed-si4732/md) ## LILYGO T-Display Bar ESP32-S3 development board with a unique wide bar-format display, 16MB flash, 8MB PSRAM, and USB-C for information display and custom UI projects. [Details](https://openhardware.directory/devices/lilygo-t-display-bar) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-bar/md) ## LILYGO T-SIM7070G ESP32-WROVER-E development board with SIM7070G NB-IoT/LTE-M/GPRS modem, GPS, Wi-Fi, Bluetooth 4.2, MicroSD, and solar charging input for ultra-low-power IoT applications. [Details](https://openhardware.directory/devices/lilygo-t-sim7070g) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim7070g/md) ## LILYGO T5s 2.7 inch E-Paper LILYGO T5s is an ESP32 development board with a 2.7-inch 264×176 e-paper display, onboard I2S audio (MAX98357A amplifier + ICS43434 MEMS mic), 500mA battery management, and TF card support. [Details](https://openhardware.directory/devices/lilygo-t5s-2-7inch-e-paper) | [Markdown](https://openhardware.directory/devices/lilygo-t5s-2-7inch-e-paper/md) ## LILYGO T8-C3 LILYGO T8-C3 is a compact ESP32-C3 development board featuring Wi-Fi, BLE 5.0, 4MB flash, TF card slot, and USB Type-C, requiring the T-U2T adapter for programming. [Details](https://openhardware.directory/devices/lilygo-t8-c3) | [Markdown](https://openhardware.directory/devices/lilygo-t8-c3/md) ## LILYGO T-FPGA LILYGO T-FPGA is a development board combining an ESP32-S3 microcontroller with a Gowin GW1NSR-4C FPGA chip, enabling flexible hardware logic design alongside Wi-Fi and Bluetooth connectivity. [Details](https://openhardware.directory/devices/lilygo-t-fpga) | [Markdown](https://openhardware.directory/devices/lilygo-t-fpga/md) ## LILYGO T-OI Plus LILYGO T-OI Plus is a compact ESP32-C3 development board with Wi-Fi, BLE 5.0, Grove connectors, and optional 16340 battery holder, designed to fit Sonoff BASICR2 enclosures. [Details](https://openhardware.directory/devices/lilygo-t-oi-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-oi-plus/md) ## LILYGO T5 2.13inch E-Paper LILYGO T5 2.13inch E-Paper is an ESP32-D0WDQ6 V3 development board with a 2.13-inch 212×104 e-ink display supporting 4-level grayscale, 4MB flash, TF card slot, and battery management with 4 user buttons. [Details](https://openhardware.directory/devices/lilygo-t5-2-13inch-e-paper) | [Markdown](https://openhardware.directory/devices/lilygo-t5-2-13inch-e-paper/md) ## LILYGO T-SIM7600E ESP32-based development board with SIM7600E-H 4G LTE Cat-4 modem, GPS, Wi-Fi, Bluetooth, 18650 battery holder with solar charging, and dual USB-C ports for high-speed IoT connectivity. [Details](https://openhardware.directory/devices/lilygo-t-sim7600e) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim7600e/md) ## LILYGO T-Relay ESP32 development board with 4 onboard HRS4H-S-DC5V relays, 4MB flash, 8MB PSRAM, WiFi, BLE 4.2, and optocoupler-isolated GPIO expansion — designed for wireless remote switch control of AC/DC loads. [Details](https://openhardware.directory/devices/lilygo-t-relay) | [Markdown](https://openhardware.directory/devices/lilygo-t-relay/md) ## LILYGO T-01C3 LILYGO T-01C3 is an ultra-compact ESP32-C3 RISC-V module with Wi-Fi and BLE 5.0, available with or without pre-soldered pins, featuring 5.33µA deep sleep current. [Details](https://openhardware.directory/devices/lilygo-t-01c3) | [Markdown](https://openhardware.directory/devices/lilygo-t-01c3/md) ## LILYGO T-Wrist E-Paper LILYGO T-Wrist E-Paper is an ESP32-based wearable development board with a 1.54-inch 200×200 e-paper display, vibration motor, optional GPS (LG77 GNSS), WiFi, Bluetooth 4.2, and 3D-printable watch shell. [Details](https://openhardware.directory/devices/lilygo-t-wrist-e-paper) | [Markdown](https://openhardware.directory/devices/lilygo-t-wrist-e-paper/md) ## LILYGO FabGL VGA32 ESP32 development board with VGA video output, dual PS/2 ports for keyboard and mouse, 4MB flash, and the FabGL graphics library — a retro computing platform for VGA terminal emulators and classic games. [Details](https://openhardware.directory/devices/lilygo-fabgl-vga32) | [Markdown](https://openhardware.directory/devices/lilygo-fabgl-vga32/md) ## LILYGO T-Micro32 Plus LILYGO T-Micro32 Plus is an upgraded compact ESP32 module with 8MB flash, 2MB PSRAM, expanded GPIO, and an improved RED C3 ceramic antenna for stronger wireless performance. [Details](https://openhardware.directory/devices/lilygo-t-micro32-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-micro32-plus/md) ## LILYGO T-Weigh ESP32 development board combining 4-channel HX711 load cell amplifiers with LoRa SX1262 radio (868/915 MHz) for wireless weight measurement and IoT scale applications over long-range LoRa networks. [Details](https://openhardware.directory/devices/lilygo-t-weigh) | [Markdown](https://openhardware.directory/devices/lilygo-t-weigh/md) ## LILYGO T-SIM A7670E ESP32-WROVER-E development board with A7670E LTE Cat-1 modem supporting voice calls, SMS, and GPS positioning. Available with multiple regional frequency variants for global 4G deployments. [Details](https://openhardware.directory/devices/lilygo-t-sim-a7670e) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim-a7670e/md) ## LILYGO T-Micro32 V2.0 LILYGO T-Micro32 V2.0 is a 45%-smaller ESP32 PICO-D4 module with integrated IPEX antenna connector, designed for space-constrained embedded product designs. [Details](https://openhardware.directory/devices/lilygo-t-micro32-v2) | [Markdown](https://openhardware.directory/devices/lilygo-t-micro32-v2/md) ## LILYGO T-Mini E-Paper S3 LILYGO T-Mini E-Paper S3 is a compact ESP32-S3 board with a 1.02-inch 128×80 e-paper display, 4MB flash, 2MB PSRAM, WiFi, BLE 5, TF card slot, and support for 18350 battery. Available in 868MHz and 915MHz variants. [Details](https://openhardware.directory/devices/lilygo-t-mini-epaper-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-mini-epaper-s3/md) ## LILYGO T-SimCam ESP32-S3 camera development board with mPCIe slot for LILYGO T-PCIE SIM cellular modules, supporting OV2640 or OV5640 cameras, 16MB flash, 8MB PSRAM, TF card, and I2S microphone for connected vision applications. [Details](https://openhardware.directory/devices/lilygo-t-simcam) | [Markdown](https://openhardware.directory/devices/lilygo-t-simcam/md) ## LILYGO T-Encoder Pro ESP32-S3 smart rotary encoder knob with 1.2-inch round AMOLED display, capacitive touch, buzzer, vibration motor, and dual Qwiic connectors — ideal for smart home control and media interfaces. [Details](https://openhardware.directory/devices/lilygo-t-encoder-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-encoder-pro/md) ## LILYGO T-Micro32 S3 LILYGO T-Micro32 S3 is an ultra-compact ESP32-S3FH4R2 module with Wi-Fi, BLE 5.0, 4MB flash, 2MB PSRAM, and dual-core Xtensa LX7 processor in a minimal footprint. [Details](https://openhardware.directory/devices/lilygo-t-micro32-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-micro32-s3/md) ## LILYGO T-A7608E-H ESP32-WROVER-E development board with A7608E-H LTE Cat-1 modem supporting voice, SMS, GPS, and multi-band LTE-FDD/TDD connectivity for Europe with 18650 battery support. [Details](https://openhardware.directory/devices/lilygo-t-a7608e-h) | [Markdown](https://openhardware.directory/devices/lilygo-t-a7608e-h/md) ## LILYGO T-TWR Rev2.1 LILYGO T-TWR Rev2.1 is an ESP32-S3 based programmable walkie-talkie board featuring the SA868 UHF/VHF radio module, GPS, OLED display, and battery support for amateur radio applications. [Details](https://openhardware.directory/devices/lilygo-t-twr-rev2-1) | [Markdown](https://openhardware.directory/devices/lilygo-t-twr-rev2-1/md) ## LILYGO T-Internet-COM ESP32 development board with LAN8720 Ethernet, 16MB flash, 8MB PSRAM, WS2812 RGB LED, SIM/TF card slots, and T-PCIE expansion support for industrial IoT, wired networking, and CAN bus applications. [Details](https://openhardware.directory/devices/lilygo-t-internet-com) | [Markdown](https://openhardware.directory/devices/lilygo-t-internet-com/md) ## LILYGO T3 S3 E-Paper LILYGO T3 S3 E-Paper is an ESP32-S3 LoRa development board with a 2.13-inch 250×122 e-paper display (DEPG0213BN), 4MB flash, 2MB PSRAM, WiFi, BLE 5, SX1262 LoRa transceiver, and LiPo battery support. [Details](https://openhardware.directory/devices/lilygo-t3-s3-epaper) | [Markdown](https://openhardware.directory/devices/lilygo-t3-s3-epaper/md) ## LILYGO T-Lion ESP32-WROVER development board with 0.96-inch OLED display, five-way directional button, single 18650 battery holder, 8MB PSRAM, WiFi, and BLE 4.2 — a compact handheld IoT controller in a slim form factor. [Details](https://openhardware.directory/devices/lilygo-t-lion) | [Markdown](https://openhardware.directory/devices/lilygo-t-lion/md) ## LILYGO T-Connect ESP32-S3 industrial communication board with three RS485 ports and one CAN bus — enables multi-protocol data switching for automation, sensor networks, and legacy equipment integration. [Details](https://openhardware.directory/devices/lilygo-t-connect) | [Markdown](https://openhardware.directory/devices/lilygo-t-connect/md) ## LILYGO T-Camera Plus S3 ESP32-S3 camera development board with 8MB PSRAM, 16MB Flash, onboard microphone, MAX98357A I2S amplifier, speaker output, and choice of OV2640 or OV5640 camera sensor for audio-visual IoT applications. [Details](https://openhardware.directory/devices/lilygo-t-camera-plus-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-camera-plus-s3/md) ## LILYGO LoRa3 (T3 LoRa32 V1.6.1) LILYGO LoRa3 (T3 LoRa32 V1.6.1) is an ESP32 development board combining Wi-Fi, BLE, and LoRa radio (SX1276/SX1278) with OLED display and TF card slot for IoT and mesh networking. [Details](https://openhardware.directory/devices/lilygo-lora3) | [Markdown](https://openhardware.directory/devices/lilygo-lora3/md) ## LILYGO T-Watch 2021 Programmable ESP32 smartwatch with 1.3-inch round GC9A01 IPS touchscreen (240×240), BMA423 accelerometer, vibration motor, RTC, WiFi, and BLE 4.2 — open-source and fully programmable with Arduino or MicroPython. [Details](https://openhardware.directory/devices/lilygo-t-watch-2021) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-2021/md) ## LILYGO T-SIM7670G S3 ESP32-S3-based development board with SIM7670G LTE Cat-1 modem, integrated GPS, Wi-Fi, Bluetooth 5, MicroSD, solar charging input, and 16 MB flash for high-performance IoT and asset tracking applications. [Details](https://openhardware.directory/devices/lilygo-t-sim-7670g-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim-7670g-s3/md) ## LILYGO T-Journal Compact ESP32-PICO-D4 camera board with OV2640 2MP sensor, 0.91-inch SSD1306 OLED display, fisheye or normal lens options, WiFi, BLE, and LiPo battery support — a minimal wireless camera module for IoT vision projects. [Details](https://openhardware.directory/devices/lilygo-t-journal) | [Markdown](https://openhardware.directory/devices/lilygo-t-journal/md) ## LILYGO T7 V1.3 Mini32 ESP32 Compact ESP32 development board (Mini32 form factor) with 4MB Flash, WiFi 802.11 b/g/n, Bluetooth 4.2, CH340C USB-to-serial, TP4054 LiPo charger, and 1.25mm JST battery connector — a classic breadboard-compatible IoT dev board. [Details](https://openhardware.directory/devices/lilygo-t7-v1-3-mini-32-esp32) | [Markdown](https://openhardware.directory/devices/lilygo-t7-v1-3-mini-32-esp32/md) ## LILYGO T5 E-Paper S3 Pro LILYGO T5 E-Paper S3 Pro is an ESP32-S3 board with a 4.7-inch 16-greyscale e-paper display, SX1262 LoRa, touch input, RTC, BQ25896/BQ27220 battery management, 16MB flash, 8MB PSRAM, and optional GPS. [Details](https://openhardware.directory/devices/lilygo-t5-e-paper-s3-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t5-e-paper-s3-pro/md) ## LILYGO T-Connect Pro ESP32-S3 three-board stack with SX1262 LoRa, CAN, RS485, RS232, Ethernet (W5500), relay, capacitive touch LCD, and DC input — a versatile industrial IoT gateway with long-range wireless. [Details](https://openhardware.directory/devices/lilygo-t-connect-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-connect-pro/md) ## LILYGO T-Track ESP32-S3R8 development board with a 1.1-inch JD9613 AMOLED display (126×294), onboard trackball, 16MB flash, 8MB PSRAM, WiFi, and BLE 5 — a compact touchless navigation dev kit for creative UI and interactive IoT applications. [Details](https://openhardware.directory/devices/lilygo-t-track) | [Markdown](https://openhardware.directory/devices/lilygo-t-track/md) ## LILYGO LoRa V1.3 LILYGO LoRa V1.3 is an ESP32 development board with SX1276 LoRa radio at 868/915 MHz, optional 0.96-inch OLED display, Wi-Fi, BLE, and 4MB flash for IoT and LoRa applications. [Details](https://openhardware.directory/devices/lilygo-lora-v1-3) | [Markdown](https://openhardware.directory/devices/lilygo-lora-v1-3/md) ## LILYGO T7 Mini32 V1.5 Updated ESP32 Mini32 development board with 8MB PSRAM, 4/16MB Flash options, dual-core 240MHz, CH9102 USB-serial, WiFi, BLE 4.2, and 1.25mm JST LiPo connector in a 40×31mm breadboard-friendly footprint. [Details](https://openhardware.directory/devices/lilygo-t7-mini32-v1-5) | [Markdown](https://openhardware.directory/devices/lilygo-t7-mini32-v1-5/md) ## LILYGO T-2CAN LILYGO T-2CAN is an ESP32-S3 development board featuring dual CAN bus interfaces via two TWAI controllers, Wi-Fi, Bluetooth 5 LE, and wide DC input range for automotive and industrial applications. [Details](https://openhardware.directory/devices/lilygo-t-2can) | [Markdown](https://openhardware.directory/devices/lilygo-t-2can/md) ## LILYGO T4 LILYGO T4 is an ESP32 development board with 8MB PSRAM, optional 2.2 or 2.4-inch ILI9341 TFT LCD display, Wi-Fi, Bluetooth 4.2 BLE, and Li-Po battery support. [Details](https://openhardware.directory/devices/lilygo-t4) | [Markdown](https://openhardware.directory/devices/lilygo-t4/md) ## LILYGO ESP32 OLED V3.0 ESP32 development board with integrated 0.96-inch SSD1306 OLED display, 4MB Flash, 520KB SRAM, WiFi, Bluetooth dual-mode, USB-C, and onboard LiPo battery charging for compact IoT display projects. [Details](https://openhardware.directory/devices/lilygo-esp32-oled-v3-0) | [Markdown](https://openhardware.directory/devices/lilygo-esp32-oled-v3-0/md) ## LILYGO T-Vending ESP32-S3-WROOM-1 development board with MAX13487E RS-485 transceiver, T-PCIE SIM expansion slot, Grove connector, WiFi, and BLE — designed for vending machine control and industrial RS-485 communication applications. [Details](https://openhardware.directory/devices/lilygo-t-vending) | [Markdown](https://openhardware.directory/devices/lilygo-t-vending/md) ## LILYGO TO-ESP8266 OLED SH1106 ESP8266 development board with 1.3-inch SH1106 OLED display, 8 digital I/O pins, CH9102 USB-serial, 3.3V operation, WiFi 802.11 b/g/n, and JST 1.25mm LiPo connector — supports ESPHome and Tasmota firmware. [Details](https://openhardware.directory/devices/lilygo-to-esp8266-oled-sh1106) | [Markdown](https://openhardware.directory/devices/lilygo-to-esp8266-oled-sh1106/md) ## LILYGO T-PoE Pro ESP32-WROVER-E development board with LAN8720 Ethernet, IEEE 802.3 af/at Power over Ethernet (5V@4A, 44–57V input), 16MB flash, 8MB PSRAM, WiFi, BLE 4.2, and expandable LCD interface for wired IoT gateway applications. [Details](https://openhardware.directory/devices/lilygo-t-poe-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-poe-pro/md) ## LILYGO T4 S3 LILYGO T4 S3 is an ESP32-S3 development board with a 2.41-inch AMOLED touchscreen (450x600), 16MB flash, 8MB PSRAM, microSD slot, Wi-Fi, and Bluetooth 5 LE. [Details](https://openhardware.directory/devices/lilygo-t4-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t4-s3/md) ## LILYGO Helium T-Beam ESP32 + SX1276 LoRa T-Beam variant optimized for the Helium IoT network — with NEO-6M GPS, AXP2101 PMU, and 18650 battery support for portable LoRaWAN network mapping and sensor nodes. [Details](https://openhardware.directory/devices/lilygo-helium-t-beam) | [Markdown](https://openhardware.directory/devices/lilygo-helium-t-beam/md) ## LILYGO ESP32-S2 Pure ESP32-S2 development board with 4MB Flash, 8MB SRAM, native USB, WiFi 802.11 b/g/n, onboard LiPo charging, and multiple control buttons — a single-core Xtensa LX7 board for USB-HID and IoT applications. [Details](https://openhardware.directory/devices/lilygo-esp32-s2) | [Markdown](https://openhardware.directory/devices/lilygo-esp32-s2/md) ## LILYGO T-Beam BPF LILYGO T-Beam BPF is an ESP32-S3 LoRa development board variant featuring an onboard Band Pass Filter for improved RF selectivity, designed for the 144–148 MHz amateur radio band with GPS and OLED display. [Details](https://openhardware.directory/devices/lilygo-t-beam-bpf) | [Markdown](https://openhardware.directory/devices/lilygo-t-beam-bpf/md) ## LILYGO ESP32-S2 WOOR Compact ESP32-S2-WROOM module-based development board with 4MB Flash, 320KB SRAM, native USB OTG, WiFi 802.11 b/g/n, onboard LiPo charging, and BOOT/RESET buttons for USB HID and IoT prototyping. [Details](https://openhardware.directory/devices/lilygo-esp32-s2-woor) | [Markdown](https://openhardware.directory/devices/lilygo-esp32-s2-woor/md) ## LILYGO T-ETH Elite High-end ESP32-S3 Ethernet development board with W5500 SPI Ethernet, Power-over-Ethernet support, 16MB flash, 8MB PSRAM, and modular LoRa/LTE expansion shield system. [Details](https://openhardware.directory/devices/lilygo-t-eth-elite-1) | [Markdown](https://openhardware.directory/devices/lilygo-t-eth-elite-1/md) ## LILYGO T-Beam 1W LILYGO T-Beam 1W is an ESP32-S3 LoRa development board featuring a 1-watt LoRa power amplifier for significantly extended transmission range, with GPS support, AXP2101 PMU, and 18650 battery compatibility. [Details](https://openhardware.directory/devices/lilygo-t-beam-1w) | [Markdown](https://openhardware.directory/devices/lilygo-t-beam-1w/md) ## LILYGO T3 S3 V1.3 ESP32-S3 LoRa development board (hardware revision V1.3) with 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, WiFi, BLE 5.0, and support for SX1262/SX1276/SX1280/LR1121 radio modules at 433/868/915MHz and 2.4GHz. [Details](https://openhardware.directory/devices/lilygo-t3-s3-v1-3) | [Markdown](https://openhardware.directory/devices/lilygo-t3-s3-v1-3/md) ## LILYGO T3 TCXO ESP32 LoRa development board with a Temperature Compensated Crystal Oscillator (TCXO) for enhanced LoRa frequency stability, 0.96-inch SSD1306 OLED display, 4MB Flash, WiFi, BLE 4.2, TF card slot, and LiPo battery support at 868/915MHz. [Details](https://openhardware.directory/devices/lilygo-t3-tcxo) | [Markdown](https://openhardware.directory/devices/lilygo-t3-tcxo/md) ## LILYGO T-Relay 5V 8-Channel ESP32-WROVER-E development board with 8 optocoupler-isolated 5V relay channels (HRS4H-S-DC5V), Wi-Fi, BLE 4.2, 8MB PSRAM, and support for DC 12–24V power input for industrial automation. [Details](https://openhardware.directory/devices/lilygo-t-relay-5v-8-channel) | [Markdown](https://openhardware.directory/devices/lilygo-t-relay-5v-8-channel/md) ## LILYGO T3 S3 LR1121 LILYGO T3 S3 LR1121 is an ESP32-S3 development board with a Semtech LR1121 multi-band transceiver supporting sub-GHz (830–940 MHz) and 2.4 GHz LoRa, plus a 0.96" OLED display and microSD card slot. [Details](https://openhardware.directory/devices/lilygo-t3-s3-lr1121) | [Markdown](https://openhardware.directory/devices/lilygo-t3-s3-lr1121/md) ## LILYGO T-Lite W5500 Ultra-compact ESP32 development board with W5500 SPI Ethernet, 0.96" OLED display, Wi-Fi, Bluetooth 4.2, and USB-C. Only 29.5×23mm for embedded IoT gateway projects. [Details](https://openhardware.directory/devices/lilygo-t-lite-w5500) | [Markdown](https://openhardware.directory/devices/lilygo-t-lite-w5500/md) ## LILYGO T3-S3 MVSR ESP32-S3 LoRa voice kit with MAX98357A speaker, MSM261S4030HOR microphone, vibration motor, RTC, 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, and SX1262/SX1276/SX1280 radio options — designed for LoRa voice communication and off-grid messaging. [Details](https://openhardware.directory/devices/lilygo-t3-s3-mvsr) | [Markdown](https://openhardware.directory/devices/lilygo-t3-s3-mvsr/md) ## LILYGO T-Touch Bar ESP32-S3 touch-sensitive bar display board with 8MB PSRAM, 16MB Flash, Wi-Fi, and Bluetooth 5, available in LED and AMOLED display variants for building custom HMI panels, smart home controls, and interactive displays. [Details](https://openhardware.directory/devices/lilygo-t-touch-bar) | [Markdown](https://openhardware.directory/devices/lilygo-t-touch-bar/md) ## LILYGO T-Zigbee ESP32-C3 TLSR8258 Dual-MCU Zigbee development board combining ESP32-C3 (WiFi/BLE) and Telink TLSR8258 (Zigbee/BLE Mesh) — both run simultaneously for bridging Zigbee sensor networks to WiFi/cloud platforms. [Details](https://openhardware.directory/devices/lilygo-t-zigbee-esp32-c3-tlsr8258) | [Markdown](https://openhardware.directory/devices/lilygo-t-zigbee-esp32-c3-tlsr8258/md) ## LILYGO T-SIM7600 ESP32 development board with SIM7600 LTE Cat-4 modem (150Mbps DL), GPS, 18650 battery holder with solar charging interface, and dual USB-C ports for high-speed cellular IoT applications. [Details](https://openhardware.directory/devices/lilygo-t-sim7600) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim7600/md) ## LILYGO T-Call V1.4 ESP32 development board with SIM800L 2G GSM/GPRS cellular modem, Wi-Fi, Bluetooth 4.2, USB-C charging, and Li-Po battery connector for IoT devices requiring SMS and GPRS data connectivity. [Details](https://openhardware.directory/devices/lilygo-t-call-v1-4) | [Markdown](https://openhardware.directory/devices/lilygo-t-call-v1-4/md) ## LILYGO T-RS S3 ESP32-S3 industrial communication board with isolated RS-232 and RS-485 modules (3000V isolation), 7–24V DC input via DB9 connector, Wi-Fi, and Bluetooth 5 LE for Modbus and industrial serial networking applications. [Details](https://openhardware.directory/devices/lilygo-t-rs-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-rs-s3/md) ## LILYGO T-Encoder ESP32 Compact ESP32-PICO-V3-02 board with rotary encoder, WS2812 RGB LED ring, Wi-Fi, BLE 4.2, 8MB flash, and 2MB PSRAM. Ideal for knob-based UI controllers and volume/parameter controls. [Details](https://openhardware.directory/devices/lilygo-t-encoder-esp32) | [Markdown](https://openhardware.directory/devices/lilygo-t-encoder-esp32/md) ## LILYGO T-Bao Dual-MCU development board combining ESP32 and KENDRYTE K210 RISC-V AI processor with OV2640 camera, 1.54" IPS touchscreen, I2S audio amplifier, motor driver, 6-axis IMU, and Wi-Fi for edge AI and robotics prototyping. [Details](https://openhardware.directory/devices/lilygo-t-bao) | [Markdown](https://openhardware.directory/devices/lilygo-t-bao/md) ## LILYGO T5 4.7-inch E-Paper V2.3 ESP32-S3 e-paper development board with 4.7-inch 540×960 16-grayscale display (EDO47TC1), Wi-Fi, Bluetooth 5.0, PCF8563 RTC, 16MB flash, 8MB PSRAM, and optional capacitive touch overlay. [Details](https://openhardware.directory/devices/lilygo-t5-4-7-e-paper-v2-3) | [Markdown](https://openhardware.directory/devices/lilygo-t5-4-7-e-paper-v2-3/md) ## LILYGO T-TV ESP32 desktop gadget with a 1.54-inch transparent blue OLED display, IR receiver, touch control, Wi-Fi, and Bluetooth. Ships with factory firmware featuring a clock, games, and animations. [Details](https://openhardware.directory/devices/lilygo-t-tv) | [Markdown](https://openhardware.directory/devices/lilygo-t-tv/md) ## LILYGO T-Dongle ESP32-S2 USB-A dongle form factor board with ESP32-S2, 1.14-inch ST7789V IPS LCD, Wi-Fi, OTG, TF card slot, and Grove connector. Predecessor to the T-Dongle S3 series, ideal for portable USB IoT devices. [Details](https://openhardware.directory/devices/lilygo-t-dongle-esp32-s2) | [Markdown](https://openhardware.directory/devices/lilygo-t-dongle-esp32-s2/md) ## LILYGO T-Embed CC1101 Plus Enhanced ESP32-S3 handheld with CC1101 sub-GHz radio, nRF24L01 2.4GHz radio, 1.9" IPS LCD, IR transceiver, 16MB flash, 8MB SRAM. Upgraded version of T-Embed CC1101 with added 2.4GHz wireless module. [Details](https://openhardware.directory/devices/lilygo-t-embed-cc1101-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-embed-cc1101-plus/md) ## M5Stack CoreS3 Third-generation M5Stack Core with ESP32-S3 dual-core 240MHz, 2.0\" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, RTC, 500mAh battery, and DinBase for mounting. [Details](https://openhardware.directory/devices/m5stack-cores3) | [Markdown](https://openhardware.directory/devices/m5stack-cores3/md) ## M5Stack Atom Lite Ultra-compact ESP32-PICO-D4 development board (24x24mm) with RGB LED, programmable button, IR transmitter, Grove port, and 6 GPIO pins. Supports Arduino, ESP-IDF, UIFlow, and MicroPython. [Details](https://openhardware.directory/devices/m5stack-atom-lite) | [Markdown](https://openhardware.directory/devices/m5stack-atom-lite/md) ## M5Stack Core2 ESP32-based IoT dev kit with 2.0" IPS capacitive touch display, 16MB flash, 8MB PSRAM, built-in mic, speaker, IMU, vibration motor, and 390mAh battery in a compact stackable enclosure. [Details](https://openhardware.directory/devices/m5stack-core2) | [Markdown](https://openhardware.directory/devices/m5stack-core2/md) ## M5Stack Cardputer-Adv Credit-card-sized ESP32-S3 handheld computer with 56-key mechanical keyboard, 1.14" IPS display, BMI270 IMU, ES8311 audio codec, 1W speaker, MEMS microphone, IR transmitter, 1750mAh battery, Grove I2C port, and microSD slot. [Details](https://openhardware.directory/devices/m5stack-cardputer-adv) | [Markdown](https://openhardware.directory/devices/m5stack-cardputer-adv/md) ## M5Stack AtomS3 Ultra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD (128x128), 6-axis IMU, 8MB flash, Wi-Fi, BLE 5.0, USB-C, and Grove port. Ideal for IoT prototyping and embedded UI projects. [Details](https://openhardware.directory/devices/m5stack-atoms3) | [Markdown](https://openhardware.directory/devices/m5stack-atoms3/md) ## Heltec WiFi LoRa 32 V4 ESP32-S3 based LoRa development board with built-in 0.96" OLED display, SX1262 LoRa transceiver, WiFi, BLE 5.0, USB-C, and LiPo battery charging. One of the most popular boards for Meshtastic. [Details](https://openhardware.directory/devices/heltec-wifi-lora-32-v4) | [Markdown](https://openhardware.directory/devices/heltec-wifi-lora-32-v4/md) ## M5Stack Dial ESP32-S3 smart rotary knob with 1.28" round GC9A01 touch display (240x240), rotary encoder, RFID reader (WS1850S), RTC (BM8563), buzzer, and 2 Grove ports for IoT control interfaces. [Details](https://openhardware.directory/devices/m5stack-dial) | [Markdown](https://openhardware.directory/devices/m5stack-dial/md) ## ESP32-CAM ESP32-based camera dev board with OV2640 2MP sensor, microSD slot, WiFi, Bluetooth, 4MB flash, and 520KB SRAM. Ideal for DIY security cameras, timelapse, and computer vision projects. [Details](https://openhardware.directory/devices/esp32-cam) | [Markdown](https://openhardware.directory/devices/esp32-cam/md) ## WT32-ETH01 ESP32 module with built-in Ethernet (LAN8720A PHY), WiFi, and Bluetooth. Designed for wired IoT applications, gateways, and industrial automation where reliable network connectivity is essential. [Details](https://openhardware.directory/devices/wt32-eth01) | [Markdown](https://openhardware.directory/devices/wt32-eth01/md) ## SenseCAP Indicator D1 Dual-MCU IoT development platform featuring ESP32-S3 and RP2040 processors with a 4-inch capacitive touchscreen, WiFi, BLE, optional LoRa, and multiple Grove sensor connectors for IoT prototyping. [Details](https://openhardware.directory/devices/sensecap-indicator-d1) | [Markdown](https://openhardware.directory/devices/sensecap-indicator-d1/md) ## M5Stack Atom Echo Ultra-compact ESP32-PICO smart speaker dev kit (24x24mm) with built-in microphone, speaker, RGB LED, button, and Grove port. Ideal for voice assistant and audio streaming projects. [Details](https://openhardware.directory/devices/m5stack-atom-echo) | [Markdown](https://openhardware.directory/devices/m5stack-atom-echo/md) ## Seeed XIAO ESP32S3 Plus Ultra-compact ESP32-S3 development board with OV2640 camera, digital microphone, 8MB PSRAM, 8MB flash, WiFi 802.11 b/g/n, BLE 5.0, extended GPIO, and battery charging — ideal for AI and IoT edge projects. [Details](https://openhardware.directory/devices/xiao-esp32s3-plus) | [Markdown](https://openhardware.directory/devices/xiao-esp32s3-plus/md) ## M5Stack Atom Matrix Ultra-compact ESP32-PICO dev board (24x24mm) with 5x5 RGB LED matrix, 6-axis IMU (MPU6886), IR LED, programmable button, and Grove port. Perfect for LED displays and motion sensing. [Details](https://openhardware.directory/devices/m5stack-atom-matrix) | [Markdown](https://openhardware.directory/devices/m5stack-atom-matrix/md) ## M5Stack AtomS3 Lite Ultra-compact ESP32-S3 dev board (24x24mm) by M5Stack without display. Features WiFi, BLE 5.0, 8MB flash, Grove port, RGB LED, button, and USB-C in a tiny enclosure for IoT and embedded projects. [Details](https://openhardware.directory/devices/m5stack-atoms3-lite) | [Markdown](https://openhardware.directory/devices/m5stack-atoms3-lite/md) ## DFRobot FireBeetle 2 ESP32-S3 AIoT Camera ESP32-S3 development board with integrated OV2640 camera, 16MB flash, 8MB PSRAM, WiFi and BLE connectivity. Designed for AIoT applications, computer vision, and edge AI projects. [Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-s3-aiot-camera) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-s3-aiot-camera/md) ## WT32-SC01 Plus ESP32-S3 development board with a 3.5" capacitive touch IPS LCD (480x320), 16MB flash, and 8MB PSRAM. Popular for building custom HMI/UI projects with LVGL, smart home panels, and IoT dashboards. [Details](https://openhardware.directory/devices/wt32-sc01-plus) | [Markdown](https://openhardware.directory/devices/wt32-sc01-plus/md) ## Prokyber AI-on-the-Edge-Cam Open-source ESP32-S3 camera board with PoE, microSD, and Stemma QT designed for AI-powered utility meter reading using the AI-on-the-edge-device firmware with TensorFlow Lite inference. [Details](https://openhardware.directory/devices/ai-on-the-edge-cam) | [Markdown](https://openhardware.directory/devices/ai-on-the-edge-cam/md) ## M5Stack Atom Echo S3R ESP32-S3 smart speaker dev kit with ES7210 audio codec, NS4168 amplifier, dual MEMS microphones, and RGB LED. Designed for Home Assistant voice assistant, ESPHome, and audio streaming projects. [Details](https://openhardware.directory/devices/m5stack-atom-echo-s3r) | [Markdown](https://openhardware.directory/devices/m5stack-atom-echo-s3r/md) ## ESP32-S3 Nano Compact ESP32-S3 dev board by Waveshare in Arduino Nano form factor. Features dual-core 240MHz LX7, 16MB flash, 8MB PSRAM, WiFi, BLE 5.0, and USB-C. Drop-in ESP32-S3 upgrade for Nano-sized projects. [Details](https://openhardware.directory/devices/esp32-s3-nano) | [Markdown](https://openhardware.directory/devices/esp32-s3-nano/md) ## Sonoff BasicR2 WiFi smart switch based on ESP8285, widely used in the open-source home automation community. Easily flashable with Tasmota or ESPHome for local-only smart home control without cloud dependency. [Details](https://openhardware.directory/devices/sonoff-basicr2) | [Markdown](https://openhardware.directory/devices/sonoff-basicr2/md) ## HestiaPi ONE (Silent) Open-source smart thermostat based on Raspberry Pi Zero W with 3.5\" touchscreen, BME280 sensor, and silent solid-state relays. Fully local control with no cloud dependency, MQTT support, and Home Assistant compatibility. [Details](https://openhardware.directory/devices/hestiapi-one-silent) | [Markdown](https://openhardware.directory/devices/hestiapi-one-silent/md) ## FaikOut WiFi Aircon Controller Open-source ESP32-S3 WiFi controller for Daikin air conditioners with local-only control via MQTT and Home Assistant. Replaces cloud-dependent Daikin WiFi modules with privacy-first, no-internet-required operation. [Details](https://openhardware.directory/devices/faikout-wifi-aircon-controller) | [Markdown](https://openhardware.directory/devices/faikout-wifi-aircon-controller/md) ## Denky D4 Open-source ESP32 Teleinfo reader board for French Linky energy meters. Pre-flashed with Tasmota, features USB-C, WiFi, QWIIC I2C port, and RGB LED. Reads both Standard and Historique TIC formats. [Details](https://openhardware.directory/devices/denky-d4) | [Markdown](https://openhardware.directory/devices/denky-d4/md) ## ESP32 WiFi Fancontroller ESP32-S2-based WiFi fan controller with 4 independent PWM outputs, integrated HDC1080 temperature and humidity sensor, Qwiic expansion, and native Home Assistant integration via ESPHome. [Details](https://openhardware.directory/devices/esp32-wifi-fancontroller) | [Markdown](https://openhardware.directory/devices/esp32-wifi-fancontroller/md) ## Mesh Detect 2 Open-source ESP32-S3 device that detects FAA Remote ID drone broadcasts and BLE devices, reporting alerts over the Meshtastic LoRa mesh network. Uses XIAO ESP32-S3 + Heltec V3. [Details](https://openhardware.directory/devices/mesh-detect-2) | [Markdown](https://openhardware.directory/devices/mesh-detect-2/md) ## ESP32-DIV V2.0 Open-source multi-band wireless development toolkit with ESP32-U, 2.8" ILI9341 TFT display, 5 antennas, and SD card slot covering WiFi, BLE, 2.4GHz, and Sub-GHz frequency bands for security research and spectrum analysis. [Details](https://openhardware.directory/devices/esp32-div-v2) | [Markdown](https://openhardware.directory/devices/esp32-div-v2/md) ## ACEBOTT QD001 Smart Robot Car ESP32-powered 4WD mecanum wheel robot car kit with ultrasonic, IR, and line-tracking sensors. Programmable via Arduino, ACECode, and Python. Expandable with camera, AI, tank, robot arm, and GPS packs. [Details](https://openhardware.directory/devices/acebott-qd001-smart-robot-car) | [Markdown](https://openhardware.directory/devices/acebott-qd001-smart-robot-car/md) ## DFRobot Maixduino AI Development Kit RISC-V AI development board combining the Kendryte K210 AI processor with ESP32 for WiFi/BT connectivity. Includes camera and microphone for computer vision and voice recognition applications. [Details](https://openhardware.directory/devices/dfrobot-maixduino) | [Markdown](https://openhardware.directory/devices/dfrobot-maixduino/md) ## ESP8266 ESP-01S WiFi Module Compact ESP8266-based WiFi dev board with 1MB flash, 2 GPIO pins, and 802.11 b/g/n. Runs Arduino, MicroPython, ESPHome, and Tasmota firmware for smart home and IoT projects. [Details](https://openhardware.directory/devices/esp8266-esp-01s) | [Markdown](https://openhardware.directory/devices/esp8266-esp-01s/md) ## WiFi Devboard for Flipper Zero ESP32-S2-based WiFi development board for Flipper Zero enabling wireless firmware updates, Black Magic Probe debugging over USB and WiFi, and WiFi pentesting with PMKID capture and deauth capabilities. [Details](https://openhardware.directory/devices/flipper-zero-wifi-devboard) | [Markdown](https://openhardware.directory/devices/flipper-zero-wifi-devboard/md) ## TinkerNav RTK GNSS Board Open-source RTK GNSS board with SkyTraq PX1105R receiver and ESP32-S3 for centimeter-level positioning. Works as base station or rover with WiFi, Bluetooth LE, and optional LoRa connectivity. [Details](https://openhardware.directory/devices/tinkernav-rtk-gnss-board) | [Markdown](https://openhardware.directory/devices/tinkernav-rtk-gnss-board/md) ## UkieLab WiFi Weather Station 7.5" A smart WiFi-enabled weather station with a 7.5\" e-ink display showing current conditions, humidity, pressure, and 4-day forecasts via Apple Weather. Available in USB-powered or battery-powered versions with optional CO2 sensor. [Details](https://openhardware.directory/devices/ukielab-wifi-weather-station-75) | [Markdown](https://openhardware.directory/devices/ukielab-wifi-weather-station-75/md) ## Oui-Spy ESP32-S3 based multi-mode BLE detection and security research tool with integrated piezo buzzer, MMCX antenna connector, and seven swappable firmware modes for surveillance detection, drone tracking, and RF direction finding. [Details](https://openhardware.directory/devices/oui-spy) | [Markdown](https://openhardware.directory/devices/oui-spy/md) ## Makerfabs ESP32 UWB Pro with Display ESP32-WROVER development board with Decawave DWM1000 UWB module for centimeter-accurate indoor positioning and ranging, featuring a 1.3\" OLED display and LiPo battery charging. [Details](https://openhardware.directory/devices/makerfabs-esp32-uwb-pro-with-display) | [Markdown](https://openhardware.directory/devices/makerfabs-esp32-uwb-pro-with-display/md) ## Makerfabs ESP32 UWB DW3000 ESP32 + DW3000 UWB development board for centimeter-accurate indoor positioning and ranging. Supports UWB channels 5 and 9, FiRa compatible, Apple U1 interoperable. WiFi and Bluetooth for data relay. [Details](https://openhardware.directory/devices/makerfabs-esp32-uwb-dw3000) | [Markdown](https://openhardware.directory/devices/makerfabs-esp32-uwb-dw3000/md) ## Evil Crow RF V2 Open-source RF security research tool with ESP32, dual CC1101 sub-GHz transceivers (300-928MHz), and NRF24L01 2.4GHz module for penetration testing, signal analysis, and replay attacks. [Details](https://openhardware.directory/devices/evil-crow-rf-v2) | [Markdown](https://openhardware.directory/devices/evil-crow-rf-v2/md) ## Louder ESP32 ESP32 audio development board with TAS5805M I2S Class-D amplifier delivering 2x23W stereo output, designed for multi-room audio, network streaming, and smart home integration. [Details](https://openhardware.directory/devices/louder-esp32) | [Markdown](https://openhardware.directory/devices/louder-esp32/md) ## HeishaMon Communication PCB Open-source ESP-based communication PCB for local monitoring and control of Panasonic Aquarea heat pumps via MQTT and HTTP, with Home Assistant integration and S0 energy metering support. [Details](https://openhardware.directory/devices/heishamon-communication-pcb) | [Markdown](https://openhardware.directory/devices/heishamon-communication-pcb/md) ## Armachat FLIP Pocket-sized open-source LoRa mesh messenger with ESP32-S3, RFM95 radio, 2.8" IPS display, and 36-key QWERTY keyboard. Runs Meshtastic and CircuitPython firmware for off-grid text communication. [Details](https://openhardware.directory/devices/armachat-flip) | [Markdown](https://openhardware.directory/devices/armachat-flip/md) ## TrackSenger Compact Meshtastic-compatible LoRa communicator with push-button keyboard, built around the Heltec Wireless Tracker with ESP32-S3, SX1262 LoRa, GPS, and a 0.96" TFT display for off-grid mesh messaging. [Details](https://openhardware.directory/devices/tracksenger) | [Markdown](https://openhardware.directory/devices/tracksenger/md) ## CircuitMess ClockStar 2.0 DIY smartwatch kit powered by ESP32 with ST7735S display, 6-axis IMU, Bluetooth connectivity, and programmable via CircuitBlocks visual coding environment. [Details](https://openhardware.directory/devices/circuitmess-clockstar-2-0) | [Markdown](https://openhardware.directory/devices/circuitmess-clockstar-2-0/md) ## CircuitMess NASA Artemis Watch 2.0 NASA-themed programmable smartwatch powered by ESP32-S3 with BLE 5.0, 6-axis IMU, ST7735S display, and activity tracking. Pre-assembled and ready to code. [Details](https://openhardware.directory/devices/circuitmess-nasa-artemis-watch-2-0) | [Markdown](https://openhardware.directory/devices/circuitmess-nasa-artemis-watch-2-0/md) ## CircuitMess Chatter 2.0 DIY encrypted LoRa communicator kit building a pair of devices for off-grid text messaging up to 2km range. Features ESP32, LLCC68 LoRa radio, and 160×128 TFT display. [Details](https://openhardware.directory/devices/circuitmess-chatter-2-0) | [Markdown](https://openhardware.directory/devices/circuitmess-chatter-2-0/md) ## CircuitMess ByteBoi 2.0 DIY retro game console kit powered by ESP32 with TFT color display, speaker, microSD card slot, and RGB LED. Build it, play pre-loaded games, then code your own. [Details](https://openhardware.directory/devices/circuitmess-byteboi-2-0) | [Markdown](https://openhardware.directory/devices/circuitmess-byteboi-2-0/md) ## CircuitMess NASA Mars Perseverance Rover NASA-themed DIY robotics kit with ESP32-S3, camera, dual DC motors, 3 servos, and WiFi/BLE. Build a programmable Mars Rover replica with robotic arm and live video feed. [Details](https://openhardware.directory/devices/circuitmess-nasa-mars-perseverance-rover) | [Markdown](https://openhardware.directory/devices/circuitmess-nasa-mars-perseverance-rover/md) ## Wemos D1 Mini (ESP8266) Compact ESP8266-based WiFi development board with 4MB flash, 11 digital I/O pins, micro-USB, and a rich shield ecosystem. The most popular board for Tasmota and ESPHome DIY home automation projects. [Details](https://openhardware.directory/devices/wemos-d1-mini-esp8266) | [Markdown](https://openhardware.directory/devices/wemos-d1-mini-esp8266/md) ## Shelly Plus 1 ESP32-C3 based WiFi/BLE smart relay module with 16A switching capacity, dry contact input, and compact DIN-rail or in-wall form factor. Flashable with Tasmota or ESPHome for local smart home control. [Details](https://openhardware.directory/devices/shelly-plus-1) | [Markdown](https://openhardware.directory/devices/shelly-plus-1/md) ## Sonoff NSPanel ESP32-based smart wall switch with 3.5-inch capacitive touchscreen, dual relay outputs, temperature sensor, and buzzer. Flashable with Tasmota for custom LVGL/Berry interfaces and Home Assistant integration. [Details](https://openhardware.directory/devices/sonoff-nspanel) | [Markdown](https://openhardware.directory/devices/sonoff-nspanel/md) ## Sonoff MINIR4 Extreme Ultra-compact ESP32-C3 WiFi smart switch module with 10A relay, detached switch mode, and the smallest form factor in its class. Fits any wall box. Flashable with Tasmota for local control. [Details](https://openhardware.directory/devices/sonoff-minir4-extreme) | [Markdown](https://openhardware.directory/devices/sonoff-minir4-extreme/md) ## Shelly Plus 2PM ESP32-based dual-relay WiFi/BLE smart switch with per-channel power monitoring via ADE7953, cover/shutter control mode, and 10A per channel. Flashable with Tasmota for local roller blind and dual light control. [Details](https://openhardware.directory/devices/shelly-plus-2pm) | [Markdown](https://openhardware.directory/devices/shelly-plus-2pm/md) ## Sonoff POW Elite 16A ESP32-based WiFi smart switch with high-accuracy power monitoring via CSE7766, 16A relay, LCD display, and DIN-rail mounting. Flashable with Tasmota for local energy tracking and home automation. [Details](https://openhardware.directory/devices/sonoff-pow-elite-16a) | [Markdown](https://openhardware.directory/devices/sonoff-pow-elite-16a/md) ## Sonoff Dual R3 ESP32-based dual-relay WiFi smart switch with per-channel power monitoring, roller shutter mode, and 2×10A outputs. Ideal for motorized blinds with Tasmota shutter calibration and position tracking. [Details](https://openhardware.directory/devices/sonoff-dual-r3) | [Markdown](https://openhardware.directory/devices/sonoff-dual-r3/md) ## Sonoff Zigbee Bridge Pro ESP32-based Zigbee-to-WiFi gateway with CC2652P coordinator chip supporting 128 Zigbee devices. Flashable with Tasmota for local Zigbee bridge operation with Home Assistant via MQTT. [Details](https://openhardware.directory/devices/sonoff-zigbee-bridge-pro) | [Markdown](https://openhardware.directory/devices/sonoff-zigbee-bridge-pro/md) ## Olimex ESP32-POE Open-source ESP32 development board with built-in Ethernet, Power-over-Ethernet support, micro-SD card slot, and LiPo battery connector. Ideal for wired Tasmota nodes and industrial IoT applications. [Details](https://openhardware.directory/devices/olimex-esp32-poe) | [Markdown](https://openhardware.directory/devices/olimex-esp32-poe/md) ## DFRobot EDGE201 DMX512 ESP32-S3 Lighting Controller ESP32-S3-based DMX512 lighting programming controller with dual-core architecture, 8 optically isolated inputs, RS485, relay output, WiFi/Bluetooth, and DIN-rail mounting in an alloy steel enclosure. Designed for stage, theater, and venue lighting automation. [Details](https://openhardware.directory/devices/dfrobot-edge201-dmx512-esp32-s3-controller) | [Markdown](https://openhardware.directory/devices/dfrobot-edge201-dmx512-esp32-s3-controller/md) ## DFRobot Beetle ESP32-C3 Coin-sized ESP32-C3 RISC-V IoT development board with WiFi, BLE 5.0, integrated LiPo charging, 13 GPIO pins, and USB-C in a 25x20.5mm form factor. [Details](https://openhardware.directory/devices/dfrobot-beetle-esp32-c3) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-esp32-c3/md) ## DFRobot Beetle ESP32 Compact ESP32 dual-core development board with WiFi, Bluetooth 4.2, sewable I/O pads, and wearable-friendly 35x34mm form factor for IoT and e-textile projects. [Details](https://openhardware.directory/devices/dfrobot-beetle-esp32) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-esp32/md) ## DFRobot FireBeetle 2 ESP32-E Compact ESP32-E IoT microcontroller with WiFi 802.11 b/g/n, Bluetooth 4.2, 18 digital I/O, 11 analog inputs, 7 touch pins, 2 DACs, onboard WS2812 RGB LED, GDI display interface, and lithium battery charging in a tiny 25.4x60mm form factor. [Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-e) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-e/md) ## Waveshare RP2350B-Plus-W Compact Pico-form-factor development board featuring the Raspberry Pi RP2350B dual-architecture MCU with WiFi and Bluetooth 5.2 via the Raspberry Pi Radio Module 2, 16MB flash, 26 GPIO pins, and USB-C connectivity. [Details](https://openhardware.directory/devices/waveshare-rp2350b-plus-w) | [Markdown](https://openhardware.directory/devices/waveshare-rp2350b-plus-w/md) ## Waveshare UGV Rover Open-source 6-wheel 4WD AI robot platform with dual-controller architecture (ESP32 + Raspberry Pi), computer vision, pan-tilt camera, ESP-NOW communication, and ROS2 support for robotics education and autonomous navigation. [Details](https://openhardware.directory/devices/waveshare-ugv-rover) | [Markdown](https://openhardware.directory/devices/waveshare-ugv-rover/md) ## DFRobot Romeo ESP32-S3 All-in-one robotics development board with ESP32-S3 (16MB flash, 8MB PSRAM), four-channel 2.5A motor driver, OV2640 camera, WiFi, Bluetooth 5, microSD, and GDI display connector for building smart robots. [Details](https://openhardware.directory/devices/dfrobot-romeo-esp32-s3) | [Markdown](https://openhardware.directory/devices/dfrobot-romeo-esp32-s3/md) ## DFRobot FireBeetle 2 ESP32-S3 (N4) ESP32-S3 dual-core IoT microcontroller with AI acceleration, WiFi 802.11 b/g/n, BLE 5.0, 26 GPIO pins, 20 ADC channels, USB 2.0 OTG, GDI display interface, lithium battery charging, and stamp-hole PCB design in a 25.4x60mm form factor. [Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-s3-n4) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-s3-n4/md) ## DFRobot UNIHIKER K10 All-in-one AI coding board for STEM education with ESP32-S3, 2.8-inch touchscreen, 2MP camera, microphone, speaker, environmental sensors, WiFi, Bluetooth 5, and pre-loaded AI models for vision, voice, and TinyML. [Details](https://openhardware.directory/devices/dfrobot-unihiker-k10) | [Markdown](https://openhardware.directory/devices/dfrobot-unihiker-k10/md) ## Waveshare WAVE ROVER Flexible 4WD mobile robot chassis with all-metal body, ESP32 controller, 0.91\" OLED, 9-axis IMU, 3S UPS power system, and open-source firmware. Supports Raspberry Pi and Jetson Nano as host computers. [Details](https://openhardware.directory/devices/waveshare-wave-rover) | [Markdown](https://openhardware.directory/devices/waveshare-wave-rover/md) ## DFRobot FireBeetle ESP32 Compact ESP32 IoT microcontroller with dual-core Xtensa LX6 at 240MHz, WiFi 802.11 b/g/n, Bluetooth 4.2, 16MB flash, 520KB SRAM, 10 digital I/O, 5 analog inputs, onboard LiPo charging, 10uA deep sleep, and 250+ tutorials. [Details](https://openhardware.directory/devices/dfrobot-firebeetle-esp32) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-esp32/md) ## Waveshare RaspRover Open-source 4WD AI robot with dual-controller architecture (ESP32 + Raspberry Pi), 5MP 160-degree camera, pan-tilt module, audio system, computer vision via OpenCV/MediaPipe, and ROS2 support for AI robotics education. [Details](https://openhardware.directory/devices/waveshare-rasprover) | [Markdown](https://openhardware.directory/devices/waveshare-rasprover/md) ## Waveshare Cobra Flex All-metal modular drive-by-wire 4WD robot chassis with ESP32-S3 controller, hub motors with built-in FOC control, CNC metal suspension, LIN bus communication, IP32 protection, and 12 kg payload capacity for heavy-duty robotics. [Details](https://openhardware.directory/devices/waveshare-cobra-flex) | [Markdown](https://openhardware.directory/devices/waveshare-cobra-flex/md) ## DFRobot ESP32-S3 AI Camera ESP32-S3 AI camera module with 2MP wide-angle night vision sensor, I2S speaker and microphone, ambient light sensor, WiFi/BLE 5.0, and edge AI inference support in a 42x42mm package. [Details](https://openhardware.directory/devices/dfrobot-esp32-s3-ai-camera) | [Markdown](https://openhardware.directory/devices/dfrobot-esp32-s3-ai-camera/md) ## DFRobot FireBeetle ESP8266 Compact ESP8266 WiFi IoT microcontroller with Tensilica L106 at 80/160MHz, 16MB flash, 50KB SRAM, 10 digital I/O, onboard LiPo charging, 46uA low-power mode, OTA updates, and Arduino/MicroPython support at just $7.50. [Details](https://openhardware.directory/devices/dfrobot-firebeetle-esp8266) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-esp8266/md) ## Waveshare ESP32-S3-LR1121 Compact castellated ESP32-S3 development board with Semtech LR1121 multi-band LoRa transceiver supporting Sub-GHz and 2.4GHz bands, WiFi, BLE 5.0, and Meshtastic compatibility in a 41x21mm form factor. [Details](https://openhardware.directory/devices/waveshare-esp32-s3-lr1121) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-s3-lr1121/md) ## Waveshare ESP32-S3-CAM-OV5640 ESP32-S3 AIoT camera board with 5MP OV5640 autofocus camera, dual-microphone array with noise cancellation, ES8311 audio codec, NS4150B speaker amplifier, battery charging, and display/camera expansion interfaces. [Details](https://openhardware.directory/devices/waveshare-esp32-s3-cam-ov5640) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-s3-cam-ov5640/md) ## Waveshare ESP32-S3-AUDIO-Board ESP32-S3 AI smart speaker development board with dual-microphone array, ES8311 audio codec, 7 surround RGB LEDs, RTC, camera and LCD expansion interfaces, and LiPo battery support for voice assistant and audio projects. [Details](https://openhardware.directory/devices/waveshare-esp32-s3-audio-board) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-s3-audio-board/md) ## Waveshare ESP32-S3-RS485-CAN Industrial ESP32-S3 control board with isolated RS-485 and CAN bus interfaces, 7-36V wide voltage input, PCF85063 RTC, DIN rail enclosure, and WiFi/Bluetooth for industrial IoT and automation applications. [Details](https://openhardware.directory/devices/waveshare-esp32-s3-rs485-can) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-s3-rs485-can/md) ## Waveshare ESP32-S3-POE-ETH-8DI-8DO Industrial ESP32-S3 controller with 8-channel optocoupler-isolated digital inputs (5-36V), 8-channel Darlington outputs (500mA each), PoE Ethernet (W5500), isolated RS-485 and CAN bus, RTC, and DIN rail enclosure. [Details](https://openhardware.directory/devices/waveshare-esp32-s3-poe-eth-8di-8do) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-s3-poe-eth-8di-8do/md) ## Espressif ESP Thread Border Router Official Espressif dual-SoC development board combining ESP32-S3 (host) and ESP32-H2 (radio co-processor) to build Thread 1.3 border routers and Zigbee gateways with Matter support over WiFi. [Details](https://openhardware.directory/devices/espressif-esp-thread-border-router) | [Markdown](https://openhardware.directory/devices/espressif-esp-thread-border-router/md) ## Khadas VIM1 Compact single-board computer powered by the Amlogic S905X quad-core SoC with 2GB DDR4 RAM, Wi-Fi, Bluetooth, and Gigabit Ethernet — supported by Armbian. [Details](https://openhardware.directory/devices/khadas-vim1) | [Markdown](https://openhardware.directory/devices/khadas-vim1/md) ## MKS KLIPAD50 MKS/Makerbase 5-inch Klipper touchscreen panel based on Rockchip RK3328, with 800×480 IPS display, 1GB RAM, 8GB eMMC, WiFi, and USB-C power — purpose-built for 3D printer Klipper control interfaces. [Details](https://openhardware.directory/devices/mks-klipad50) | [Markdown](https://openhardware.directory/devices/mks-klipad50/md) ## WiFi LoRa 32 (V3) Compact ESP32-S3 + SX1262 LoRa development board with 0.96" OLED display, USB-C, and built-in LiPo charging. One of the primary boards for Meshtastic and LoRaWAN IoT projects. [Details](https://openhardware.directory/devices/wifi-lora-32-v3) | [Markdown](https://openhardware.directory/devices/wifi-lora-32-v3/md) ## WiFi LoRa 32 (V4) Upgraded ESP32-S3R2 + SX1262 LoRa dev board with 2MB PSRAM, 16MB flash, 0.96" OLED, switchable FPC/IPEX 2.4G antenna, GNSS interface, and solar input. Meshtastic and LoRaWAN ready. [Details](https://openhardware.directory/devices/wifi-lora-32-v4) | [Markdown](https://openhardware.directory/devices/wifi-lora-32-v4/md) ## Adafruit Feather M0 WiFi (ATSAMD21 + ATWINC1500) ARM Cortex-M0+ Feather board with ATWINC1500 802.11 b/g/n WiFi, 256KB flash, 32KB RAM, 10 analog inputs, and built-in LiPo charger. FCC-certified WiFi for IoT and connected projects. [Details](https://openhardware.directory/devices/adafruit-feather-m0-wifi) | [Markdown](https://openhardware.directory/devices/adafruit-feather-m0-wifi/md) ## Seeeduino Cloud Arduino Yun-compatible board combining ATmega32u4 with a Dragino HE Linux WiFi module running OpenWRT. Features 802.11 b/g/n WiFi, Ethernet, 14 digital I/O pins, and USB host for IoT gateway applications. [Details](https://openhardware.directory/devices/seeeduino-cloud) | [Markdown](https://openhardware.directory/devices/seeeduino-cloud/md) ## Adafruit Feather M0 WiFi with uFL Variant of the Feather M0 WiFi (ATSAMD21 + ATWINC1500) with a u.FL antenna connector instead of a PCB trace antenna, allowing use of an external antenna for improved WiFi range. [Details](https://openhardware.directory/devices/adafruit-feather-m0-wifi-ufl) | [Markdown](https://openhardware.directory/devices/adafruit-feather-m0-wifi-ufl/md) ## Adafruit Metro M7 with AirLift Arduino UNO-compatible Metro board powered by NXP iMX RT1011 at 500 MHz with an ESP32 AirLift WiFi co-processor, 8 MB QSPI Flash, and USB-C — Adafruit's fastest Metro ever. [Details](https://openhardware.directory/devices/adafruit-metro-m7-airlift) | [Markdown](https://openhardware.directory/devices/adafruit-metro-m7-airlift/md) ## Pycom SiPy ESP32-based MicroPython development board with WiFi, Bluetooth LE, and +22dBm SigFox radio (RCZ2/RCZ4). Breadboard-compatible with ultra-low power modes, ideal for long-range sub-GHz IoT deployments. [Details](https://openhardware.directory/devices/pycom-sipy) | [Markdown](https://openhardware.directory/devices/pycom-sipy/md) ## Arduino Yún Hybrid Arduino/Linux board combining ATmega32U4 with a MIPS-based Linux SoC, 802.11bgn WiFi, Ethernet, USB host, and microSD — enabling cloud-connected Arduino sketches and over-the-air programming. [Details](https://openhardware.directory/devices/arduino-yun) | [Markdown](https://openhardware.directory/devices/arduino-yun/md) ## Pycom GPy ESP32-based triple-network MicroPython board with WiFi 802.11 b/g/n, Bluetooth LE, and LTE CAT-M1/NB1 cellular. 4MB RAM, 8MB flash, 22 GPIO, breadboard-compatible. Ideal for global LTE IoT deployments. [Details](https://openhardware.directory/devices/pycom-gpy) | [Markdown](https://openhardware.directory/devices/pycom-gpy/md) ## Arduino MKR1000 Compact Arduino board with SAMD21 ARM Cortex-M0+ and ATSAMW25 integrated WiFi (802.11 b/g/n) with cryptochip and SSL support. Built-in LiPo charger, 8 digital I/O, and 7 analog inputs in a slim 65mm form factor. [Details](https://openhardware.directory/devices/arduino-mkr1000) | [Markdown](https://openhardware.directory/devices/arduino-mkr1000/md) ## Pycom FiPy Five-network ESP32 MicroPython board with WiFi, Bluetooth LE, LoRa, SigFox, and dual LTE-M (CAT-M1/NB1). 4MB RAM, 8MB flash, 22 GPIO. The most connected Pycom module for versatile LPWAN IoT applications. [Details](https://openhardware.directory/devices/pycom-fipy) | [Markdown](https://openhardware.directory/devices/pycom-fipy/md) ## Raspberry Pi Zero 2 W Credit-card-tiny Linux SBC with a quad-core Cortex-A53 at 1 GHz, 512 MB RAM, 2.4 GHz WiFi, Bluetooth 4.2, a 40-pin GPIO header footprint, mini HDMI, and a CSI camera connector. [Details](https://openhardware.directory/devices/raspberry-pi-zero-2-w) | [Markdown](https://openhardware.directory/devices/raspberry-pi-zero-2-w/md) ## Pycom LoPy4 ESP32-based quad-network MicroPython board with WiFi, Bluetooth LE, LoRa (SX1276 868/915/433MHz), and SigFox. 4MB PSRAM, 8MB flash, 24 GPIO. Can function as a nano LoRa gateway. FCC/CE certified. [Details](https://openhardware.directory/devices/pycom-lopy4) | [Markdown](https://openhardware.directory/devices/pycom-lopy4/md) ## Adafruit HUZZAH ESP8266 Breakout Breadboard-friendly ESP8266 WiFi breakout at 80 MHz with 802.11 b/g/n, 9 GPIO, 3.3V logic, 500mA regulator, and pre-loaded NodeMCU firmware — Adafruit's accessible entry point to ESP8266 development. [Details](https://openhardware.directory/devices/adafruit-huzzah-esp8266) | [Markdown](https://openhardware.directory/devices/adafruit-huzzah-esp8266/md) ## Raspberry Pi Zero WH Raspberry Pi Zero W with pre-soldered 40-pin GPIO headers. BCM2835 single-core 1GHz ARM11, 512MB RAM, built-in 802.11 b/g/n WiFi (BCM43143), Bluetooth LE, Mini HDMI, Micro USB, and MicroSD. No soldering required. [Details](https://openhardware.directory/devices/raspberry-pi-zero-wh) | [Markdown](https://openhardware.directory/devices/raspberry-pi-zero-wh/md) ## Pycom WiPy 3.0 ESP32-based MicroPython IoT module with 802.11b/g/n WiFi, Bluetooth LE and Classic, 8MB flash, 4MB RAM, and ultra-low power ULP co-processor for deep-sleep GPIO monitoring at 25 µA. [Details](https://openhardware.directory/devices/pycom-wipy-30) | [Markdown](https://openhardware.directory/devices/pycom-wipy-30/md) ## Adafruit Feather HUZZAH ESP8266 All-in-one ESP8266 WiFi Feather board at 80 MHz with 802.11 b/g/n, USB-serial (CP2104), LiPo charging, 9 GPIO, and 4MB flash — the easiest way to add WiFi to a portable battery-powered project. [Details](https://openhardware.directory/devices/adafruit-feather-huzzah-esp8266) | [Markdown](https://openhardware.directory/devices/adafruit-feather-huzzah-esp8266/md) ## Pycom LoPy 1.0 ESP32-based MicroPython module combining 802.11b/g/n WiFi, Bluetooth, and LoRa/LoRaWAN (868/915 MHz) in one board. Can act as a nano LoRa gateway and is 100% Python programmable for multi-protocol IoT deployments. [Details](https://openhardware.directory/devices/pycom-lopy-10) | [Markdown](https://openhardware.directory/devices/pycom-lopy-10/md) ## Adafruit Metro M4 Express AirLift Arduino Uno-compatible board with ATSAMD51J19 Cortex M4F at 120MHz, ESP32 AirLift WiFi co-processor with TLS/SSL, 512KB flash, 192KB RAM, 2MB QSPI flash, 25 GPIO, dual DAC/ADC, and native USB. Arduino shield compatible. [Details](https://openhardware.directory/devices/adafruit-metro-m4-airlift) | [Markdown](https://openhardware.directory/devices/adafruit-metro-m4-airlift/md) ## Adafruit HUZZAH32 ESP32 Breakout Minimal ESP32 breakout board with dual-core Xtensa LX6 at 240MHz, 520KB SRAM, 4MB flash, WiFi 802.11 b/g/n, Bluetooth Classic + BLE, 12 ADC, 2 DAC. No USB converter or battery charger — requires external FTDI/CP2104 for programming. [Details](https://openhardware.directory/devices/adafruit-huzzah32-esp32-breakout) | [Markdown](https://openhardware.directory/devices/adafruit-huzzah32-esp32-breakout/md) ## Raspberry Pi Zero W Ultra-compact single-board computer with BCM2835 ARM11 at 1 GHz, 512MB RAM, built-in 802.11b/g/n WiFi (BCM43143), Bluetooth 4.1 LE, mini HDMI, microSD, camera connector, and 40-pin GPIO header in a 65mm × 30mm footprint. [Details](https://openhardware.directory/devices/raspberry-pi-zero-w) | [Markdown](https://openhardware.directory/devices/raspberry-pi-zero-w/md) ## Adafruit HUZZAH32 – ESP32 Feather ESP32 dual-core 240 MHz Feather board with 802.11b/g/n WiFi, Bluetooth 4.2 Classic and BLE, 4MB flash, 520KB SRAM, 12 ADC channels, 2 DACs, capacitive touch, and built-in LiPo charger. [Details](https://openhardware.directory/devices/adafruit-huzzah32-esp32) | [Markdown](https://openhardware.directory/devices/adafruit-huzzah32-esp32/md) ## Pycom LoPy The Pycom LoPy is a compact triple-network MicroPython-programmable board featuring ESP32 with built-in WiFi, BLE 4.2, and LoRa (SX1272) on 868/915 MHz — ideal for IoT mesh networking and asset tracking. [Details](https://openhardware.directory/devices/pycom-lopy) | [Markdown](https://openhardware.directory/devices/pycom-lopy/md) ## Adafruit ItsyBitsy ESP32 Ultra-compact ESP32 development board in the ItsyBitsy form factor with WiFi, Bluetooth Classic + BLE, USB-C, and LiPo charging — perfect for space-constrained wireless projects. [Details](https://openhardware.directory/devices/adafruit-itsybitsy-esp32) | [Markdown](https://openhardware.directory/devices/adafruit-itsybitsy-esp32/md) ## Pycom WiPy 3.0 The Pycom WiPy 3.0 is a compact MicroPython-programmable ESP32 board with WiFi 802.11 b/g/n and Bluetooth BLE 4.2, designed for low-power wireless IoT applications and smart-home prototyping. [Details](https://openhardware.directory/devices/pycom-wipy-3) | [Markdown](https://openhardware.directory/devices/pycom-wipy-3/md) ## Adafruit HUZZAH32 ESP32 Feather Board Adafruit's Feather-format ESP32 board with dual-core Xtensa LX6 @ 240MHz, WiFi b/g/n, Bluetooth Classic + BLE 4.2, built-in LiPo charger, and Feather-compatible pin layout. Great all-around wireless IoT platform. [Details](https://openhardware.directory/devices/adafruit-huzzah32-esp32-feather) | [Markdown](https://openhardware.directory/devices/adafruit-huzzah32-esp32-feather/md) ## Adafruit Matrix Portal S3 ESP32-S3 board designed to drive HUB75 LED matrix panels directly, with built-in WiFi, BLE 5.0, native USB, STEMMA QT connector, and two user buttons — ideal for dynamic digital signage and LED art displays. [Details](https://openhardware.directory/devices/adafruit-matrix-portal-s3) | [Markdown](https://openhardware.directory/devices/adafruit-matrix-portal-s3/md) ## Adafruit Feather ESP32-S3 Feather-format ESP32-S3 board with native USB, WiFi, BLE 5.0, 8MB flash, LiPo charging, and full Feather ecosystem compatibility — a capable wireless development platform for CircuitPython and Arduino projects. [Details](https://openhardware.directory/devices/adafruit-feather-esp32-s3) | [Markdown](https://openhardware.directory/devices/adafruit-feather-esp32-s3/md) ## Heltec Wireless Stick Lite V3 Compact ESP32-S3 + SX1262 LoRa development board with WiFi, BLE 5.0, and integrated battery management. Meshtastic and LoRaWAN compatible, with a slim stick form factor ideal for IoT sensor nodes and mesh networking. [Details](https://openhardware.directory/devices/heltec-wireless-stick-lite-v3) | [Markdown](https://openhardware.directory/devices/heltec-wireless-stick-lite-v3/md) ## M5Stack FIRE V2.7 Feature-rich ESP32 IoT dev kit with 2.0" IPS display, 8MB PSRAM, 16MB flash, MPU6886 IMU, BMM150 magnetometer, 10x SK6812 RGB LEDs, microphone, speaker, microSD, 500mAh battery, and M5GO charging base. [Details](https://openhardware.directory/devices/m5stack-fire-v2-7) | [Markdown](https://openhardware.directory/devices/m5stack-fire-v2-7/md) ## M5Stack Basic Core V2.7 Compact ESP32 IoT dev kit with 2.0" IPS LCD (320x240), 16MB flash, microSD, speaker, 110mAh battery, and three Grove ports in a stackable 54mm square enclosure. [Details](https://openhardware.directory/devices/m5stack-basic-core-v2-7) | [Markdown](https://openhardware.directory/devices/m5stack-basic-core-v2-7/md) ## M5Stack CoreS3 Lite ESP32-S3 IoT controller with 2.0" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, 200mAh battery, and Grove expansion ports. [Details](https://openhardware.directory/devices/m5stack-cores3-lite) | [Markdown](https://openhardware.directory/devices/m5stack-cores3-lite/md) ## M5Stack Station-Bat Industrial ESP32 controller with 1.14" IPS LCD, 6 Grove ports, INA3221 power monitor, MPU6886 IMU, RTC, 7x SK6812 LEDs, dual 18650 battery holders, USB-A power output, and 16MB flash. [Details](https://openhardware.directory/devices/m5stack-station-bat) | [Markdown](https://openhardware.directory/devices/m5stack-station-bat/md) ## M5Stack StamPLC ESP32-S3 industrial PLC controller with 1.14" IPS LCD, 4 relays, 8 opto-isolated inputs, RS-485, CAN bus, INA226 power monitor, RTC, buzzer, microSD, and DIN-rail mounting in a compact enclosure. [Details](https://openhardware.directory/devices/m5stack-stamplc) | [Markdown](https://openhardware.directory/devices/m5stack-stamplc/md) ## Heltec Wireless Shell V3 Ultra-compact ESP32-S3 + SX1262 LoRa module with stamp-hole design for direct PCB integration, supporting WiFi, BLE 5, and LoRa at 470-928MHz with deep sleep current under 10uA. [Details](https://openhardware.directory/devices/heltec-wireless-shell-v3) | [Markdown](https://openhardware.directory/devices/heltec-wireless-shell-v3/md) ## M5Stack AtomS3R Ultra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD, BMI270 IMU, BMM150 magnetometer, 8MB PSRAM, IR transmitter, LP5562 RGB LED driver, and Grove port for IoT and robotics. [Details](https://openhardware.directory/devices/m5stack-atoms3r) | [Markdown](https://openhardware.directory/devices/m5stack-atoms3r/md) ## Heltec ESP32-C3 Arduino Development Board Ultra-compact RISC-V development board with ESP32-C3FN4, WiFi, BLE 5.0, integrated battery management, and USB-C — ideal for low-power IoT sensor nodes and wireless prototyping. [Details](https://openhardware.directory/devices/heltec-esp32-c3) | [Markdown](https://openhardware.directory/devices/heltec-esp32-c3/md) ## Heltec WiFi Kit 32 (V3) ESP32-S3-based IoT development board with built-in 0.96" OLED display, lithium battery management, WiFi and Bluetooth 5.0 connectivity, and USB-C interface in a compact 50mm form factor. [Details](https://openhardware.directory/devices/heltec-wifi-kit-32-v3) | [Markdown](https://openhardware.directory/devices/heltec-wifi-kit-32-v3/md) ## Heltec HRI-485X Industrial RS-485 wireless converter with ESP32, LoRa SX1262, Ethernet, and ESPHome support. Converts RS-485/Modbus serial data to LoRa, LoRaWAN, LTE, or Ethernet for long-range industrial IoT communication. DIN rail mountable with IP65 protection and 4.5-28V wide voltage input. [Details](https://openhardware.directory/devices/heltec-hri-485x) | [Markdown](https://openhardware.directory/devices/heltec-hri-485x/md) ## Heltec HT-DE01 Multi Size E-Ink Drive Board A compact universal e-ink driver board based on ESP32-S3FN8 with WiFi and Bluetooth connectivity, 24-pin FFC interface compatible with most e-ink displays, USB-C and LiPo battery support, and Arduino development environment. [Details](https://openhardware.directory/devices/heltec-ht-de01) | [Markdown](https://openhardware.directory/devices/heltec-ht-de01/md) ## Heltec Wireless Tracker V2 ESP32-S3 development board with SX1262 LoRa (28dBm), UC6580 dual-frequency GNSS, 0.96" TFT display, solar charging, and Meshtastic/MeshCore support for GPS tracking and mesh networking. [Details](https://openhardware.directory/devices/heltec-wireless-tracker-v2) | [Markdown](https://openhardware.directory/devices/heltec-wireless-tracker-v2/md) ## Heltec Wireless Bridge ESP32 + SX1276 LoRa multi-protocol bridge in an aluminum enclosure, converting between WiFi, Bluetooth, and LoRa with 8MB flash and 8MB PSRAM. [Details](https://openhardware.directory/devices/heltec-wireless-bridge) | [Markdown](https://openhardware.directory/devices/heltec-wireless-bridge/md) ## Heltec Wireless Tracker ESP32-S3 development board with integrated SX1262 LoRa transceiver, UC6580 dual-frequency GNSS receiver, and 0.96-inch TFT display for IoT asset tracking, Meshtastic mesh networking, and LoRaWAN applications. [Details](https://openhardware.directory/devices/heltec-wireless-tracker) | [Markdown](https://openhardware.directory/devices/heltec-wireless-tracker/md) ## Heltec HT-M00S Single Channel LoRa Gateway A compact, wall-mountable single-channel LoRaWAN gateway based on the HT-CT62 module (ESP32-C3 + SX1262). Designed for indoor use with a built-in PCB antenna, it can listen to over a dozen LoRa nodes simultaneously and forward data to cloud servers via WiFi. Available in 470MHz, 868MHz, and 915MHz variants. [Details](https://openhardware.directory/devices/heltec-ht-m00s) | [Markdown](https://openhardware.directory/devices/heltec-ht-m00s/md) ## Heltec Wireless Stick V3 Compact ESP32-S3 development board with integrated SX1262 LoRa transceiver and 0.49-inch OLED display. Supports Meshtastic, LoRaWAN, WiFi, and BLE 5.0 in a breadboard-friendly form factor with battery management. [Details](https://openhardware.directory/devices/heltec-wireless-stick-v3) | [Markdown](https://openhardware.directory/devices/heltec-wireless-stick-v3/md) ## Heltec HRI-4853 ESP32-based RS-485 to Ethernet/LTE converter (DTU) with built-in web configuration, Modbus support, DIN-rail mounting, and ESPHome compatibility for industrial IoT and Home Assistant integration. [Details](https://openhardware.directory/devices/heltec-hri-4853) | [Markdown](https://openhardware.directory/devices/heltec-hri-4853/md) ## Heltec Vision Master E213 ESP32-S3 development board with 2.13-inch E-Paper display and optional SX1262 LoRa radio, supporting Meshtastic, LoRaWAN, Arduino, and MicroPython. Features WiFi, BLE 5.0, ultra-low 20uA deep sleep, lithium battery management, and dual SH2.0 sensor ports. [Details](https://openhardware.directory/devices/heltec-vision-master-e213) | [Markdown](https://openhardware.directory/devices/heltec-vision-master-e213/md) ## Heltec Vision Master E290 ESP32-S3 development board with 2.9-inch e-ink display and optional SX1262 LoRa radio, featuring Raspberry Pi GPIO header, Meshtastic support, and 18uA deep sleep for battery-powered IoT and mesh networking applications. [Details](https://openhardware.directory/devices/heltec-vision-master-e290) | [Markdown](https://openhardware.directory/devices/heltec-vision-master-e290/md) ## Heltec Vision Master T190 ESP32-S3 development board with optional SX1262 LoRa module and 1.9-inch TFT color display. Supports Meshtastic, LoRaWAN, Arduino, MicroPython, and features integrated battery management with 18uA deep sleep. [Details](https://openhardware.directory/devices/heltec-vision-master-t190) | [Markdown](https://openhardware.directory/devices/heltec-vision-master-t190/md) ## Heltec Wireless Paper ESP32-S3 + SX1262 LoRa E-Ink development board with 2.13" e-paper display, WiFi, BLE 5.0, and LoRa connectivity. Designed for electronic shelf labels, Meshtastic mesh nodes, and low-power IoT sensor displays. [Details](https://openhardware.directory/devices/heltec-wireless-paper) | [Markdown](https://openhardware.directory/devices/heltec-wireless-paper/md) ## Heltec HT-M00 Dual Channel LoRa Gateway A compact, low-cost dual-channel LoRaWAN gateway based on ESP32 and dual SX1276 transceivers, designed for indoor LoRa coverage of 1500-2000 square meters with support for SF7-SF12 spreading factors and LoRaWAN Class A/C protocols. [Details](https://openhardware.directory/devices/heltec-ht-m00) | [Markdown](https://openhardware.directory/devices/heltec-ht-m00/md) ## Heltec HT-M01S Indoor LoRa Gateway (Rev.2.0) Compact 8-channel LoRaWAN gateway based on ESP32 and SX1303 + SX1250, with WiFi and Ethernet backhaul, 1.8-inch TFT display, and aluminum housing. Supports LoRaWAN Class A/C, TTN, and ChirpStack. [Details](https://openhardware.directory/devices/heltec-ht-m01s-v2) | [Markdown](https://openhardware.directory/devices/heltec-ht-m01s-v2/md) ## Arduino UNO R4 WiFi Arduino's flagship UNO board upgraded with Renesas RA4M1 ARM Cortex-M4F at 48MHz, ESP32-S3 WiFi/BLE 5.0, built-in 12×8 LED matrix, 12-bit DAC, CAN bus, op-amp, and Qwiic connector — all in the classic UNO form factor at 5V. [Details](https://openhardware.directory/devices/arduino-uno-r4-wifi) | [Markdown](https://openhardware.directory/devices/arduino-uno-r4-wifi/md) ## Arduino Nano ESP32 Arduino Nano form factor powered by ESP32-S3 with WiFi 802.11 b/g/n, Bluetooth LE 5.0, dual-core Xtensa LX7 at 240MHz, 8MB flash, 512KB SRAM, USB-C, and HID support — Arduino's compact IoT powerhouse with MicroPython support. [Details](https://openhardware.directory/devices/arduino-nano-esp32) | [Markdown](https://openhardware.directory/devices/arduino-nano-esp32/md) ## Arduino GIGA R1 WiFi Arduino's most powerful board — dual-core STM32H747XI with Cortex-M7 at 480MHz + Cortex-M4 at 240MHz, 2MB flash, 1MB RAM, WiFi, Bluetooth, 76 GPIO, USB-A + USB-C, 3.5mm audio jack, camera connector, and CAN bus in Mega/Due form factor. [Details](https://openhardware.directory/devices/arduino-giga-r1-wifi) | [Markdown](https://openhardware.directory/devices/arduino-giga-r1-wifi/md) ## Arduino Nano RP2040 Connect Nano form factor board with RP2040 dual-core Cortex-M0+ at 133MHz, 16MB flash, 264KB SRAM, WiFi 802.11 b/g/n and BLE via u-blox NINA-W102, built-in 6-axis IMU and microphone, 22 digital I/O with 20 PWM channels. [Details](https://openhardware.directory/devices/arduino-nano-rp2040-connect) | [Markdown](https://openhardware.directory/devices/arduino-nano-rp2040-connect/md) ## Arduino Portenta C33 Cost-effective Portenta module with Renesas RA6M5 ARM Cortex-M33 at 200MHz, 2MB flash, 512KB SRAM, WiFi/BLE, hardware security, and Portenta/MKR compatibility — bringing industrial IoT capabilities at a fraction of the X8 price. [Details](https://openhardware.directory/devices/arduino-portenta-c33) | [Markdown](https://openhardware.directory/devices/arduino-portenta-c33/md) ## Arduino Nicla Vision Tiny 22.86mm AI vision module with STM32H747 dual-core Cortex-M7/M4, 2MP camera, WiFi/BLE, 6-axis IMU, microphone, and time-of-flight sensor — runs TinyML image recognition and OpenMV/MicroPython at the edge. [Details](https://openhardware.directory/devices/arduino-nicla-vision) | [Markdown](https://openhardware.directory/devices/arduino-nicla-vision/md) ## Arduino Opta WiFi Industrial micro PLC with STM32H747 dual-core Cortex-M7/M4, WiFi, BLE, Ethernet, 4\u00d72.3kW relays, Modbus TCP/RTU, hardware security, DIN rail mount, and IEC 61131-3 PLC programming — co-developed with Finder for real industrial automation. [Details](https://openhardware.directory/devices/arduino-opta-wifi) | [Markdown](https://openhardware.directory/devices/arduino-opta-wifi/md) ## Pine64 PineCone BL602 Open-source RISC-V evaluation board powered by the Bouffalo Lab BL602 WiFi+BLE5 SoC. Features 276KB SRAM, 2MB flash, USB-C with CH340 serial bridge, onboard RGB LED, JTAG header, and PCB antenna. Supports Arduino, NuttX, FreeRTOS, Rust, and OpenBeken firmware. Priced from $3.99. [Details](https://openhardware.directory/devices/pine64-pinecone-bl602) | [Markdown](https://openhardware.directory/devices/pine64-pinecone-bl602/md) ## Pine64 PineNut Model-01S Ultra-compact BL602 RISC-V WiFi+BLE5 IoT module in ESP-01S form factor with 8-pin through-hole header. Features 276KB SRAM, 2MB flash, onboard RGB LED, and PCB antenna. Supports Arduino, NuttX, FreeRTOS, and OpenBeken firmware. Priced from $1.99. [Details](https://openhardware.directory/devices/pine64-pinenut-01s) | [Markdown](https://openhardware.directory/devices/pine64-pinenut-01s/md) ## Pine64 PineNut Model-12S BL602 RISC-V WiFi+BLE5 stamp module with 16 castellated pads for SMT integration. Exposes 11 GPIOs with SPI, I2C, UART, SDIO, JTAG, ADC, and DAC. Features 276KB SRAM, 2MB flash, and PCB antenna. Priced from $1.99. [Details](https://openhardware.directory/devices/pine64-pinenut-12s) | [Markdown](https://openhardware.directory/devices/pine64-pinenut-12s/md) ## Pine64 Ox64 Pico-sized RISC-V SBC powered by the Bouffalo Lab BL808 triple-core SoC with WiFi, BLE 5.0, and Zigbee. Features 64MB PSRAM, up to 16MB flash, microSD slot, USB-C with MIPI-CSI camera support, and 26 GPIO pins. Runs Linux, NuttX, and FreeRTOS. Priced from $6. [Details](https://openhardware.directory/devices/pine64-ox64) | [Markdown](https://openhardware.directory/devices/pine64-ox64/md)