264KB SRAM

Dual-MCU board combining RP2040 and ESP32-C3, with a 1.14-inch ST7789V display, WiFi, BLE 5.0, and Arduino/MicroPython support — bringing Raspberry Pi Pico connectivity to wireless IoT projects.

Open-source 60% mechanical keyboard PCB with RP2040 MCU, per-key RGB NeoPixel LEDs, Kailh hot-swap sockets, onboard buzzer, and USB-C. Runs KMK and CircuitPython firmware.

RP2040-powered expansion module for Flipper Zero with DVI-D video output, 6-axis IMU motion sensor, 14-pin GPIO breakout, and USB-C. Fully open-source firmware and schematics.

Compact RP2040 dual-core ARM Cortex-M0+ development board with USB-C, 8 GPIO pins, and beginner-friendly immersion gold pads in a 27x20mm form factor.

A compact USB-A development board and debugging tool built around the RP2040 dual-core Cortex-M0+ MCU, featuring a 1.14-inch IPS LCD, microSD card slot, and exposed SWD, UART, and I2C connectors for p

A Raspberry Pi Zero form-factor development board based on the RP2040 dual-core Cortex-M0+ MCU with 16MB flash, Mini HDMI (DVI) output via PIO bitbanging, USB-C, PIO-USB host port, microSD card slot,

A compact RP2040-based LoRa module with SX1262 transceiver, available in 410-525MHz (LF) and 850-930MHz (HF) variants, featuring 2MB flash, 20 GPIO pins, IPEX antenna connector, and castellated edge d

A compact RP2040-based module with Bluetooth 5.1 dual-mode (BLE + Classic SPP) connectivity, 2MB flash, 14 GPIO pins, ceramic antenna, and castellated edge design for embedded Bluetooth applications.

Tiny 36×18mm breadboard-friendly board with Raspberry Pi RP2040 dual-core Cortex-M0+ @ 133MHz, 264KB SRAM, 8MB Flash, 23 GPIO, 4 ADC, 2 PIO peripherals, and Micro-USB. Runs CircuitPython and MicroPyth

Nano form factor board with RP2040 dual-core Cortex-M0+ at 133MHz, 16MB flash, 264KB SRAM, WiFi 802.11 b/g/n and BLE via u-blox NINA-W102, built-in 6-axis IMU and microphone, 22 digital I/O with 20 PW