2MB Flash

Enhanced T-Echo with nRF52840, SX1262 LoRa, L76K GPS, BHI260AP IMU, 2400mAh battery, 1.54-inch e-paper display, vibration motor, buzzer, and 1/4-inch mount — Meshtastic-ready with extended runtime.

Open-source flight controller based on the Pixhawk FMUv6C standard. Features STM32H743 processor, dual redundant IMUs, barometer, and magnetometer. Runs ArduPilot or PX4 autopilot firmware.

A 48-key ortholinear mechanical keyboard designed as a distraction-free writing companion for phones and tablets, powered by RP2040 with QMK/Vial firmware and dual rotary encoders.

Open-source flight controller based on the Pixhawk FMUv5 standard. Features STM32F765 processor at 216MHz, triple redundant IMUs, barometer, and magnetometer. Runs ArduPilot or PX4 autopilot firmware.

Compact RP2040 dual-core ARM Cortex-M0+ development board with USB-C, 8 GPIO pins, and beginner-friendly immersion gold pads in a 27x20mm form factor.

Ultra-affordable RP2350 dual-architecture development board with switchable ARM Cortex-M33 / RISC-V cores, LiPo charging, 11 GPIO pins, and USB-C in a 25x20.5mm package.

A compact RP2040-based LoRa module with SX1262 transceiver, available in 410-525MHz (LF) and 850-930MHz (HF) variants, featuring 2MB flash, 20 GPIO pins, IPEX antenna connector, and castellated edge d

A compact RP2040-based module with Bluetooth 5.1 dual-mode (BLE + Classic SPP) connectivity, 2MB flash, 14 GPIO pins, ceramic antenna, and castellated edge design for embedded Bluetooth applications.

Arduino's most powerful board — dual-core STM32H747XI with Cortex-M7 at 480MHz + Cortex-M4 at 240MHz, 2MB flash, 1MB RAM, WiFi, Bluetooth, 76 GPIO, USB-A + USB-C, 3.5mm audio jack, camera connector, a

Cost-effective Portenta module with Renesas RA6M5 ARM Cortex-M33 at 200MHz, 2MB flash, 512KB SRAM, WiFi/BLE, hardware security, and Portenta/MKR compatibility — bringing industrial IoT capabilities at

Tiny 22.86mm AI vision module with STM32H747 dual-core Cortex-M7/M4, 2MP camera, WiFi/BLE, 6-axis IMU, microphone, and time-of-flight sensor — runs TinyML image recognition and OpenMV/MicroPython at t

Industrial micro PLC with STM32H747 dual-core Cortex-M7/M4, WiFi, BLE, Ethernet, 4\u00d72.3kW relays, Modbus TCP/RTU, hardware security, DIN rail mount, and IEC 61131-3 PLC programming — co-developed

Entry-level industrial micro PLC with STM32H747 dual-core Cortex-M7/M4, Ethernet, 4\u00d72.3kW relays, Modbus TCP, hardware security, DIN rail mount, and IEC 61131-3 PLC programming — the affordable p

High-performance 32-bit 3D printer board with STM32H743VI @ 480MHz, 5 driver slots, CAN bus, FDCAN, WiFi module support, 12–24V, 10A bed output. Marlin, Klipper, and RepRapFirmware compatible.

Advanced 32-bit 3D printer board with STM32H743VI @ 480MHz and EZ driver system (tool-free). 5 EZ driver slots, CAN/FDCAN, WiFi module support, 10A bed, 12–24V. Marlin, Klipper, RRF ready.

RP2040-based ADXL345 accelerometer board for Klipper input shaping and resonance compensation on 3D printers. Connects via USB Type-C with ESD protection. Board size: 33.25 × 15.5mm.

Toolhead board designed for the Voron StealthBurner. Powered by RP2040, supports CAN and USB, includes TMC2209, ADXL345 accelerometer, and PT100/PT1000 for Klipper 3D printers.

Eddy current inductive bed leveling probe for Klipper 3D printers. Offers 0.5μm precision, rapid bed mesh scanning, temperature compensation (USB), and works as Z-endstop. Mounts on standard Voron X c

RP2040-based handheld button board with 7 mechanical switches and RGB NeoPixel LEDs for manual control of Klipper 3D printers. Triggers homing, heating, motor disable and other macros via USB.