# device — Open Hardware Directory > **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link. **27 device listed.** ## LILYGO T-Internet-COM ESP32 development board with LAN8720 Ethernet, 16MB flash, 8MB PSRAM, WS2812 RGB LED, SIM/TF card slots, and T-PCIE expansion support for industrial IoT, wired networking, and CAN bus applications. [Details](https://openhardware.directory/devices/lilygo-t-internet-com) | [Markdown](https://openhardware.directory/devices/lilygo-t-internet-com/md) ## WT32-ETH01 ESP32 module with built-in Ethernet (LAN8720A PHY), WiFi, and Bluetooth. Designed for wired IoT applications, gateways, and industrial automation where reliable network connectivity is essential. [Details](https://openhardware.directory/devices/wt32-eth01) | [Markdown](https://openhardware.directory/devices/wt32-eth01/md) ## LuckFox Pico WebBee Ultra-compact Rockchip RV1103 Linux micro development board in USB dongle form factor with 10/100Mbps Ethernet, 64MB DDR2, 128MB NAND flash, and ABS protective case. Ideal for lightweight web servers, USB scripting, and smart home IoT. [Details](https://openhardware.directory/devices/waveshare-luckfox-webbee) | [Markdown](https://openhardware.directory/devices/waveshare-luckfox-webbee/md) ## LuckFox Pico Ultra-compact Linux SBC (51x21mm) based on Rockchip RV1103 with ARM Cortex-A7 @ 1.2GHz, RISC-V MCU co-processor, 0.5 TOPS NPU, ISP 3.2, 64MB DDR2, MIPI CSI camera, and 24 GPIO pins in a Pico form factor. [Details](https://openhardware.directory/devices/luckfox-pico) | [Markdown](https://openhardware.directory/devices/luckfox-pico/md) ## LuckFox Pico Pi Rockchip RV1106 Linux development board with 40-pin RPi-compatible GPIO, 100M Ethernet, optional WiFi 6, 4G LTE M.2 slot, MIPI CSI camera, 4x USB-A host ports, 8GB eMMC, audio jack, and onboard microphone. Available in A (1 TOPS NPU, 256MB) and B (0.5 TOPS, 128MB) variants. [Details](https://openhardware.directory/devices/waveshare-luckfox-pico-pi) | [Markdown](https://openhardware.directory/devices/waveshare-luckfox-pico-pi/md) ## LuckFox Pico 86 Panel Standard 86-type wall-mount smart panel with 4-inch 720x720 IPS capacitive touch display, Rockchip RV1106 SoC, 2-channel relay with optocoupler isolation, RS485, 100M Ethernet, onboard speaker and microphone, wide 6-30V DC input. Designed for smart home control and HMI applications. [Details](https://openhardware.directory/devices/waveshare-luckfox-pico-86-panel) | [Markdown](https://openhardware.directory/devices/waveshare-luckfox-pico-86-panel/md) ## LuckFox PicoKVM Compact IP-KVM remote management tool based on RV1106G3, capturing 1080p@60fps HDMI with H.264 encoding at 80-200ms latency. Features 100M Ethernet, USB HID/UMS emulation, Wake-on-LAN, web terminal, and optional 1.54-inch touch display. [Details](https://openhardware.directory/devices/waveshare-luckfox-picokvm) | [Markdown](https://openhardware.directory/devices/waveshare-luckfox-picokvm/md) ## LuckFox Pico Ultra Full-featured Linux SBC based on Rockchip RV1106G3 with 1.0 TOPS NPU, 256MB DDR3L, 8GB eMMC, 100M Ethernet (RJ45), optional WiFi 6/BT 5.2, MIPI CSI camera, RGB LCD display output, speaker, and PoE header. [Details](https://openhardware.directory/devices/luckfox-pico-ultra) | [Markdown](https://openhardware.directory/devices/luckfox-pico-ultra/md) ## LuckFox Pico Pro Linux SBC based on Rockchip RV1106G2 with ARM Cortex-A7 @ 1.2GHz, 0.5 TOPS NPU, 128MB DDR3L, 256MB SPI NAND Flash, 100M Ethernet (RJ45), MIPI CSI camera, 26 GPIO pins, and RTC battery header in Pico form factor. [Details](https://openhardware.directory/devices/luckfox-pico-pro) | [Markdown](https://openhardware.directory/devices/luckfox-pico-pro/md) ## Waveshare ESP32-P4-ETH Pico-form-factor development board with ESP32-P4 RISC-V dual-core at 400MHz, 100Mbps Ethernet via IP101 PHY, 32MB PSRAM, 32MB flash, MIPI-DSI/CSI interfaces, onboard ES8311 audio codec with amplifier, microSD, USB 2.0 OTG HS, and PoE module header. [Details](https://openhardware.directory/devices/waveshare-esp32-p4-eth) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-p4-eth/md) ## LuckFox Pico Plus Linux SBC based on Rockchip RV1103 with ARM Cortex-A7 @ 1.2GHz, RISC-V MCU, 0.5 TOPS NPU, 64MB DDR2, 128MB NAND Flash, 10/100M Ethernet (RJ45), MIPI CSI camera, and 25 GPIO pins in a Pico form factor. [Details](https://openhardware.directory/devices/luckfox-pico-plus) | [Markdown](https://openhardware.directory/devices/luckfox-pico-plus/md) ## Waveshare ESP32-P4-WIFI6-DEV-KIT Full-featured ESP32-P4 development board with WiFi 6 and Bluetooth 5 LE via ESP32-C6, 100Mbps Ethernet, PoE header, 3.5mm headphone jack, USB OTG HS switchable host/device, 16MB flash, 32MB PSRAM, MIPI-DSI/CSI, and 28 GPIOs. [Details](https://openhardware.directory/devices/waveshare-esp32-p4-wifi6-dev-kit) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-p4-wifi6-dev-kit/md) ## LuckFox Lyra Ultra Feature-rich Linux SBC based on Rockchip RK3506B with triple-core ARM Cortex-A7 @ 1.2GHz + Cortex-M0, 512MB DDR3L, 8GB eMMC, 100M Ethernet, optional WiFi 6/BT 5.2, MIPI DSI display, PoE header, and 33 GPIO pins. [Details](https://openhardware.directory/devices/luckfox-lyra-ultra) | [Markdown](https://openhardware.directory/devices/luckfox-lyra-ultra/md) ## LuckFox Core1106 Compact 30x30mm Rockchip RV1106 compute module with ARM Cortex-A7, up to 1 TOPS NPU, 5MP ISP, 256MB DDR3L, 8GB eMMC, optional WiFi 6 and BLE 5.2, dual MIPI CSI camera inputs, and 112 castellated holes. Designed for vision AI and IoT integration. [Details](https://openhardware.directory/devices/waveshare-luckfox-core1106) | [Markdown](https://openhardware.directory/devices/waveshare-luckfox-core1106/md) ## Waveshare ESP32-P4-WIFI6-POE-ETH ESP32-P4 development board with WiFi 6 and Bluetooth 5 LE via ESP32-C6, 100Mbps PoE Ethernet via IP101GRI, IPEX external antenna, USB Type-A OTG HS, 32MB PSRAM, 16MB flash, MIPI-DSI/CSI, onboard audio, and 28 GPIOs. [Details](https://openhardware.directory/devices/waveshare-esp32-p4-wifi6-poe-eth) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-p4-wifi6-poe-eth/md) ## LuckFox Lyra Plus Compact Linux SBC based on Rockchip RK3506G2 with triple-core ARM Cortex-A7 @ 1.2GHz + Cortex-M0, 128MB DDR3L, 256MB NAND Flash, 100M Ethernet, MIPI DSI display output, 24 Rockchip Matrix IO pins, and built-in audio/video codec. [Details](https://openhardware.directory/devices/luckfox-lyra-plus) | [Markdown](https://openhardware.directory/devices/luckfox-lyra-plus/md) ## Seeeduino Cloud Arduino Yun-compatible board combining ATmega32u4 with a Dragino HE Linux WiFi module running OpenWRT. Features 802.11 b/g/n WiFi, Ethernet, 14 digital I/O pins, and USB host for IoT gateway applications. [Details](https://openhardware.directory/devices/seeeduino-cloud) | [Markdown](https://openhardware.directory/devices/seeeduino-cloud/md) ## Arduino Uno Ethernet Arduino UNO with built-in Ethernet and microSD slot based on the ATmega328P at 16 MHz — a self-contained board for networked Arduino projects without needing a separate Ethernet shield. [Details](https://openhardware.directory/devices/arduino-uno-ethernet) | [Markdown](https://openhardware.directory/devices/arduino-uno-ethernet/md) ## Netduino Plus The Netduino Plus is an open-source .NET Micro Framework microcontroller board with built-in Ethernet, Arduino-compatible pinout, and microSD slot — enabling C# development for connected embedded projects. [Details](https://openhardware.directory/devices/netduino-plus) | [Markdown](https://openhardware.directory/devices/netduino-plus/md) ## Netduino Plus 2 The Netduino Plus 2 is an Arduino R3-compatible .NET Micro Framework development board with a 168MHz ARM Cortex-M4 processor, built-in Ethernet, microSD slot, and 12-bit ADC — offering C# programming for connected embedded applications. [Details](https://openhardware.directory/devices/netduino-plus-2) | [Markdown](https://openhardware.directory/devices/netduino-plus-2/md) ## Netduino 3 Ethernet The Netduino 3 Ethernet is a .NET Micro Framework board with an STM32F427VI ARM Cortex-M4 at 168MHz, wired Ethernet with full TCP/IP stack, microSD storage, Arduino shield compatibility, and 3 GOBUS ports for C# network-connected embedded projects. [Details](https://openhardware.directory/devices/netduino-3-ethernet) | [Markdown](https://openhardware.directory/devices/netduino-3-ethernet/md) ## Heltec Sufficient IoT Hub Linux-based IoT hub with Allwinner T113-S3 dual-core ARM Cortex-A7 SoC, LoRa (SX1262), WiFi, Ethernet, and optional LTE. Runs Debian 10 with a dedicated IoT OS, CLI, and web UI for no-code device management. [Details](https://openhardware.directory/devices/heltec-sufficient-iot-hub) | [Markdown](https://openhardware.directory/devices/heltec-sufficient-iot-hub/md) ## Heltec HRI-485X Industrial RS-485 wireless converter with ESP32, LoRa SX1262, Ethernet, and ESPHome support. Converts RS-485/Modbus serial data to LoRa, LoRaWAN, LTE, or Ethernet for long-range industrial IoT communication. DIN rail mountable with IP65 protection and 4.5-28V wide voltage input. [Details](https://openhardware.directory/devices/heltec-hri-485x) | [Markdown](https://openhardware.directory/devices/heltec-hri-485x/md) ## Heltec HT-M7603 Indoor LoRa Gateway Cost-effective 8-channel indoor LoRaWAN gateway based on MT7628 + SX1303/SX1250, supporting WiFi and Ethernet uplink with web-based configuration for TTN, ChirpStack, and custom MQTT servers. [Details](https://openhardware.directory/devices/heltec-ht-m7603) | [Markdown](https://openhardware.directory/devices/heltec-ht-m7603/md) ## Arduino Opta WiFi Industrial micro PLC with STM32H747 dual-core Cortex-M7/M4, WiFi, BLE, Ethernet, 4\u00d72.3kW relays, Modbus TCP/RTU, hardware security, DIN rail mount, and IEC 61131-3 PLC programming — co-developed with Finder for real industrial automation. [Details](https://openhardware.directory/devices/arduino-opta-wifi) | [Markdown](https://openhardware.directory/devices/arduino-opta-wifi/md) ## Arduino Opta Lite Entry-level industrial micro PLC with STM32H747 dual-core Cortex-M7/M4, Ethernet, 4\u00d72.3kW relays, Modbus TCP, hardware security, DIN rail mount, and IEC 61131-3 PLC programming — the affordable path to Arduino-powered industrial control. [Details](https://openhardware.directory/devices/arduino-opta-lite) | [Markdown](https://openhardware.directory/devices/arduino-opta-lite/md) ## Pine64 Oz64 RISC-V and ARM dual-ISA single board computer powered by the Sophgo SG2000 SoC with 512MB DDR3, WiFi 6, BLE 5.2, 10/100 Ethernet, dual MIPI-CSI camera ports, and 0.5 TOPS NPU. Hardware switch selects between RISC-V and ARM boot. Priced from $12.99. [Details](https://openhardware.directory/devices/pine64-oz64) | [Markdown](https://openhardware.directory/devices/pine64-oz64/md)