# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**13 device listed.**

## LILYGO T-Lora C6

LILYGO T-Lora C6 is a compact LoRa development board combining the ESP32-C6 module with SX1262 radio, supporting Wi-Fi 6, Bluetooth 5 LE, Zigbee, Thread, and sub-GHz LoRa communication.

[Details](https://openhardware.directory/devices/lilygo-t-lora-c6) | [Markdown](https://openhardware.directory/devices/lilygo-t-lora-c6/md)

## LILYGO T-MixRF

LILYGO T-MixRF is a multi-protocol RF development board combining SX1262 LoRa sub-GHz radio with CC1101 FSK/OOK transceiver for versatile wireless protocol support and RF experimentation.

[Details](https://openhardware.directory/devices/lilygo-t-mixrf) | [Markdown](https://openhardware.directory/devices/lilygo-t-mixrf/md)

## Gnat LoRa+GNSS Asset Tracker

Ultra-small (20x20mm), ultra-low-power LoRa/LoRaWAN + concurrent GNSS asset tracker by Tlera Corp, built on the Murata CMWX1ZZABZ-078 module with STM32L082 MCU, SX1276 LoRa radio, u-blox MAX-M8Q GNSS, and LIS2DW12 accelerometer.

[Details](https://openhardware.directory/devices/gnat-loragnss-asset-tracker) | [Markdown](https://openhardware.directory/devices/gnat-loragnss-asset-tracker/md)

## Waveshare RP2040-LoRa

A compact RP2040-based LoRa module with SX1262 transceiver, available in 410-525MHz (LF) and 850-930MHz (HF) variants, featuring 2MB flash, 20 GPIO pins, IPEX antenna connector, and castellated edge design for embedded integration.

[Details](https://openhardware.directory/devices/waveshare-rp2040-lora) | [Markdown](https://openhardware.directory/devices/waveshare-rp2040-lora/md)

## WiFi LoRa 32 (V3)

Compact ESP32-S3 + SX1262 LoRa development board with 0.96" OLED display, USB-C, and built-in LiPo charging. One of the primary boards for Meshtastic and LoRaWAN IoT projects.

[Details](https://openhardware.directory/devices/wifi-lora-32-v3) | [Markdown](https://openhardware.directory/devices/wifi-lora-32-v3/md)

## WiFi LoRa 32 (V4)

Upgraded ESP32-S3R2 + SX1262 LoRa dev board with 2MB PSRAM, 16MB flash, 0.96" OLED, switchable FPC/IPEX 2.4G antenna, GNSS interface, and solar input. Meshtastic and LoRaWAN ready.

[Details](https://openhardware.directory/devices/wifi-lora-32-v4) | [Markdown](https://openhardware.directory/devices/wifi-lora-32-v4/md)

## Adafruit Feather 32u4 RFM95 LoRa 868/915 MHz

ATmega32u4 Feather board with RFM95W SX1276 LoRa radio for 868/915 MHz long-range communication. Achieves 2+ km range, supports spreading factors SF6-SF12, and includes a built-in LiPo charger.

[Details](https://openhardware.directory/devices/adafruit-feather-32u4-rfm95-lora-868-915) | [Markdown](https://openhardware.directory/devices/adafruit-feather-32u4-rfm95-lora-868-915/md)

## Adafruit Feather 32u4 RFM96 LoRa 433 MHz

ATmega32u4 Feather board with RFM96W SX1278 LoRa radio for 433 MHz long-range communication. Achieves 2+ km range with quarter-wave antennas, supports LoRaWAN, and includes a built-in LiPo charger.

[Details](https://openhardware.directory/devices/adafruit-feather-32u4-rfm96-lora-433) | [Markdown](https://openhardware.directory/devices/adafruit-feather-32u4-rfm96-lora-433/md)

## Adafruit Feather M0 RFM95 LoRa 900 MHz

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM95W SX1276 LoRa radio for 868/915 MHz. Achieves 2+ km range, supports LoRaWAN, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

[Details](https://openhardware.directory/devices/adafruit-feather-m0-rfm95-lora-900) | [Markdown](https://openhardware.directory/devices/adafruit-feather-m0-rfm95-lora-900/md)

## Adafruit Feather M0 RFM96 LoRa 433 MHz

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM96W SX1278 LoRa radio for 433 MHz. Achieves 2+ km range, supports LoRaWAN, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

[Details](https://openhardware.directory/devices/adafruit-feather-m0-rfm96-lora-433) | [Markdown](https://openhardware.directory/devices/adafruit-feather-m0-rfm96-lora-433/md)

## Pycom LoPy 1.0

ESP32-based MicroPython module combining 802.11b/g/n WiFi, Bluetooth, and LoRa/LoRaWAN (868/915 MHz) in one board. Can act as a nano LoRa gateway and is 100% Python programmable for multi-protocol IoT deployments.

[Details](https://openhardware.directory/devices/pycom-lopy-10) | [Markdown](https://openhardware.directory/devices/pycom-lopy-10/md)

## Heltec CubeCell AB01 Dev-Board (V2)

Ultra-low power LoRa/LoRaWAN development board based on the ASR6502 SiP (ARM Cortex-M0+ @ 48MHz + SX1262), with USB-C, solar panel support, and 3.5uA deep sleep current. Ideal for remote environmental sensing and battery-powered IoT nodes.

[Details](https://openhardware.directory/devices/heltec-cubecell-ab01-v2) | [Markdown](https://openhardware.directory/devices/heltec-cubecell-ab01-v2/md)

## Heltec CubeCell GPS-6502 (HTCC-AB02S)

LoRa + GPS development board based on ASR6502 SiP (ARM Cortex-M0+ with SX1262), featuring integrated AIR530Z GPS/BeiDou module, 0.96" OLED display, solar charging, and ultra-low 21uA deep sleep current for long-range IoT tracking applications.

[Details](https://openhardware.directory/devices/heltec-cubecell-gps-6502-htcc-ab02s) | [Markdown](https://openhardware.directory/devices/heltec-cubecell-gps-6502-htcc-ab02s/md)