# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**10 device listed.**

## LILYGO T7-C6

Compact ESP32-C6 development board with WiFi 6, BLE 5, and IEEE 802.15.4 (Zigbee/Thread/Matter) support, featuring 4MB flash and USB-C for next-generation IoT protocols.

[Details](https://openhardware.directory/devices/lilygo-t7-c6) | [Markdown](https://openhardware.directory/devices/lilygo-t7-c6/md)

## LILYGO T-Lora C6

LILYGO T-Lora C6 is a compact LoRa development board combining the ESP32-C6 module with SX1262 radio, supporting Wi-Fi 6, Bluetooth 5 LE, Zigbee, Thread, and sub-GHz LoRa communication.

[Details](https://openhardware.directory/devices/lilygo-t-lora-c6) | [Markdown](https://openhardware.directory/devices/lilygo-t-lora-c6/md)

## M5Stack NanoC6

Ultra-compact ESP32-C6 dev board by M5Stack with WiFi 6, BLE 5.0, Zigbee 3.0, and Thread/Matter support. RISC-V single-core at 160MHz, USB-C, RGB LED, and button in a tiny form factor.

[Details](https://openhardware.directory/devices/m5stack-nanoc6) | [Markdown](https://openhardware.directory/devices/m5stack-nanoc6/md)

## Sonoff Zigbee 3.0 USB Dongle Plus E

EFR32MG21-based Zigbee 3.0 USB coordinator dongle for Home Assistant and Zigbee2MQTT. A popular, reliable choice for building smart home Zigbee networks.

[Details](https://openhardware.directory/devices/sonoff-zigbee-3-0-usb-dongle-plus-e) | [Markdown](https://openhardware.directory/devices/sonoff-zigbee-3-0-usb-dongle-plus-e/md)

## Sonoff Zigbee Bridge Pro

ESP32-based Zigbee-to-WiFi gateway with CC2652P coordinator chip supporting 128 Zigbee devices. Flashable with Tasmota for local Zigbee bridge operation with Home Assistant via MQTT.

[Details](https://openhardware.directory/devices/sonoff-zigbee-bridge-pro) | [Markdown](https://openhardware.directory/devices/sonoff-zigbee-bridge-pro/md)

## Waveshare ESP32-H2-Zero

Ultra-compact castellated ESP32-H2 development board with BLE 5.2, Zigbee 3.0, Thread 1.3, and Matter support. USB-C powered with WS2812 RGB LED, 15 GPIO pins, and 4MB flash in a tiny 23.5 x 15.2mm form factor.

[Details](https://openhardware.directory/devices/waveshare-esp32-h2-zero) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-h2-zero/md)

## Olimex ESP32-H2-DevKit-LiPo

Ultra-affordable open-source ESP32-H2 dev board for Thread, Zigbee, and Matter — BLE 5, LiPo charging, Qwiic/Stemma, dual USB-C, for €5.95.

[Details](https://openhardware.directory/devices/olimex-esp32-h2-devkit-lipo) | [Markdown](https://openhardware.directory/devices/olimex-esp32-h2-devkit-lipo/md)

## Espressif ESP Thread Border Router

Official Espressif dual-SoC development board combining ESP32-S3 (host) and ESP32-H2 (radio co-processor) to build Thread 1.3 border routers and Zigbee gateways with Matter support over WiFi.

[Details](https://openhardware.directory/devices/espressif-esp-thread-border-router) | [Markdown](https://openhardware.directory/devices/espressif-esp-thread-border-router/md)

## ESP32-C6 DevKitC-1-N8

Official Espressif development board featuring the ESP32-C6 — a RISC-V single-core MCU with WiFi 6, BLE 5.0, Zigbee 3.0, Thread 1.3, and native Matter support. 8MB flash, USB-C JTAG/serial.

[Details](https://openhardware.directory/devices/esp32-c6-devkitc-1) | [Markdown](https://openhardware.directory/devices/esp32-c6-devkitc-1/md)

## ESP32-H2 DevKitM-1-N4S

Official Espressif development board for the ESP32-H2 — a RISC-V MCU purpose-built for 802.15.4 wireless protocols: BLE 5.3, Zigbee 3.0, Thread 1.3, and Matter. No WiFi. 4MB flash, USB-C with CH343P.

[Details](https://openhardware.directory/devices/esp32-h2-devkitm-1) | [Markdown](https://openhardware.directory/devices/esp32-h2-devkitm-1/md)