# device — Open Hardware Directory > **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link. **37 device listed.** ## LILYGO T-Beam Supreme Upgraded T-Beam with ESP32-S3FN8, QMI8658 6-axis IMU, LoRa SX1262, dual GPS options (L76K or u-blox), SoftRF firmware support, and multi-frequency bands for Meshtastic and aircraft tracking. [Details](https://openhardware.directory/devices/lilygo-t-beam-supreme) | [Markdown](https://openhardware.directory/devices/lilygo-t-beam-supreme/md) ## LILYGO T-Micro32 Plus LILYGO T-Micro32 Plus is an upgraded compact ESP32 module with 8MB flash, 2MB PSRAM, expanded GPIO, and an improved RED C3 ceramic antenna for stronger wireless performance. [Details](https://openhardware.directory/devices/lilygo-t-micro32-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-micro32-plus/md) ## LILYGO T-RS S3 ESP32-S3 industrial communication board with isolated RS-232 and RS-485 modules (3000V isolation), 7–24V DC input via DB9 connector, Wi-Fi, and Bluetooth 5 LE for Modbus and industrial serial networking applications. [Details](https://openhardware.directory/devices/lilygo-t-rs-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-rs-s3/md) ## LILYGO T-Encoder ESP32 Compact ESP32-PICO-V3-02 board with rotary encoder, WS2812 RGB LED ring, Wi-Fi, BLE 4.2, 8MB flash, and 2MB PSRAM. Ideal for knob-based UI controllers and volume/parameter controls. [Details](https://openhardware.directory/devices/lilygo-t-encoder-esp32) | [Markdown](https://openhardware.directory/devices/lilygo-t-encoder-esp32/md) ## M5StickC Plus 2 Compact ESP32-PICO-V3-02 wearable dev board with 1.14" TFT LCD (135x240), 6-axis IMU (MPU6886), IR transmitter, microphone, buzzer, 200mAh battery, Wi-Fi and Bluetooth in a 48x24x13.5mm form factor. [Details](https://openhardware.directory/devices/m5stickc-plus-2) | [Markdown](https://openhardware.directory/devices/m5stickc-plus-2/md) ## M5Stack Cardputer-Adv Credit-card-sized ESP32-S3 handheld computer with 56-key mechanical keyboard, 1.14" IPS display, BMI270 IMU, ES8311 audio codec, 1W speaker, MEMS microphone, IR transmitter, 1750mAh battery, Grove I2C port, and microSD slot. [Details](https://openhardware.directory/devices/m5stack-cardputer-adv) | [Markdown](https://openhardware.directory/devices/m5stack-cardputer-adv/md) ## M5Stack AtomS3 Ultra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD (128x128), 6-axis IMU, 8MB flash, Wi-Fi, BLE 5.0, USB-C, and Grove port. Ideal for IoT prototyping and embedded UI projects. [Details](https://openhardware.directory/devices/m5stack-atoms3) | [Markdown](https://openhardware.directory/devices/m5stack-atoms3/md) ## M5Stack Dial ESP32-S3 smart rotary knob with 1.28" round GC9A01 touch display (240x240), rotary encoder, RFID reader (WS1850S), RTC (BM8563), buzzer, and 2 Grove ports for IoT control interfaces. [Details](https://openhardware.directory/devices/m5stack-dial) | [Markdown](https://openhardware.directory/devices/m5stack-dial/md) ## SenseCAP Indicator D1 Dual-MCU IoT development platform featuring ESP32-S3 and RP2040 processors with a 4-inch capacitive touchscreen, WiFi, BLE, optional LoRa, and multiple Grove sensor connectors for IoT prototyping. [Details](https://openhardware.directory/devices/sensecap-indicator-d1) | [Markdown](https://openhardware.directory/devices/sensecap-indicator-d1/md) ## Seeed XIAO ESP32S3 Plus Ultra-compact ESP32-S3 development board with OV2640 camera, digital microphone, 8MB PSRAM, 8MB flash, WiFi 802.11 b/g/n, BLE 5.0, extended GPIO, and battery charging — ideal for AI and IoT edge projects. [Details](https://openhardware.directory/devices/xiao-esp32s3-plus) | [Markdown](https://openhardware.directory/devices/xiao-esp32s3-plus/md) ## M5Stack AtomS3 Lite Ultra-compact ESP32-S3 dev board (24x24mm) by M5Stack without display. Features WiFi, BLE 5.0, 8MB flash, Grove port, RGB LED, button, and USB-C in a tiny enclosure for IoT and embedded projects. [Details](https://openhardware.directory/devices/m5stack-atoms3-lite) | [Markdown](https://openhardware.directory/devices/m5stack-atoms3-lite/md) ## FaikOut WiFi Aircon Controller Open-source ESP32-S3 WiFi controller for Daikin air conditioners with local-only control via MQTT and Home Assistant. Replaces cloud-dependent Daikin WiFi modules with privacy-first, no-internet-required operation. [Details](https://openhardware.directory/devices/faikout-wifi-aircon-controller) | [Markdown](https://openhardware.directory/devices/faikout-wifi-aircon-controller/md) ## Denky D4 Open-source ESP32 Teleinfo reader board for French Linky energy meters. Pre-flashed with Tasmota, features USB-C, WiFi, QWIIC I2C port, and RGB LED. Reads both Standard and Historique TIC formats. [Details](https://openhardware.directory/devices/denky-d4) | [Markdown](https://openhardware.directory/devices/denky-d4/md) ## Mesh Detect 2 Open-source ESP32-S3 device that detects FAA Remote ID drone broadcasts and BLE devices, reporting alerts over the Meshtastic LoRa mesh network. Uses XIAO ESP32-S3 + Heltec V3. [Details](https://openhardware.directory/devices/mesh-detect-2) | [Markdown](https://openhardware.directory/devices/mesh-detect-2/md) ## Bee Data Logger ESP32-S3 based data logging board with DS3231 RTC, microSD card slot, dual STEMMA/Qwiic connectors, and LiPo charging. Achieves ~21µA deep sleep current. Open source hardware with Arduino and CircuitPython support. [Details](https://openhardware.directory/devices/bee-data-logger) | [Markdown](https://openhardware.directory/devices/bee-data-logger/md) ## Oui-Spy ESP32-S3 based multi-mode BLE detection and security research tool with integrated piezo buzzer, MMCX antenna connector, and seven swappable firmware modes for surveillance detection, drone tracking, and RF direction finding. [Details](https://openhardware.directory/devices/oui-spy) | [Markdown](https://openhardware.directory/devices/oui-spy/md) ## Louder ESP32 ESP32 audio development board with TAS5805M I2S Class-D amplifier delivering 2x23W stereo output, designed for multi-room audio, network streaming, and smart home integration. [Details](https://openhardware.directory/devices/louder-esp32) | [Markdown](https://openhardware.directory/devices/louder-esp32/md) ## TrackSenger Compact Meshtastic-compatible LoRa communicator with push-button keyboard, built around the Heltec Wireless Tracker with ESP32-S3, SX1262 LoRa, GPS, and a 0.96" TFT display for off-grid mesh messaging. [Details](https://openhardware.directory/devices/tracksenger) | [Markdown](https://openhardware.directory/devices/tracksenger/md) ## Waveshare Cobra Flex All-metal modular drive-by-wire 4WD robot chassis with ESP32-S3 controller, hub motors with built-in FOC control, CNC metal suspension, LIN bus communication, IP32 protection, and 12 kg payload capacity for heavy-duty robotics. [Details](https://openhardware.directory/devices/waveshare-cobra-flex) | [Markdown](https://openhardware.directory/devices/waveshare-cobra-flex/md) ## TinyS3[D] ESP32-S3 by Unexpected Maker The TinyS3[D] is Unexpected Maker's ultra-compact ESP32-S3 board in the TinyPICO form factor, featuring a dual antenna system (onboard + u.FL, software-switchable), I2C battery fuel gauge, 8MB flash, 8MB PSRAM, LiPo charging, and 17 GPIO pins — all in a tiny castellated module. [Details](https://openhardware.directory/devices/tinys3d-esp32-s3) | [Markdown](https://openhardware.directory/devices/tinys3d-esp32-s3/md) ## ESP32-S3-DevKitM-1 Espressif official ESP32-S3 development board using the compact ESP32-S3-MINI-1 module, with dual-core 240 MHz LX7, 8 MB flash, up to 45 GPIO, dual USB ports, and smaller footprint than the WROOM-1. [Details](https://openhardware.directory/devices/esp32-s3-devkitm-1) | [Markdown](https://openhardware.directory/devices/esp32-s3-devkitm-1/md) ## Adafruit ESP32-S3 Feather (8MB Flash, No PSRAM) Feather-format ESP32-S3 dual-core 240 MHz board with 8 MB flash, native USB-C, BLE, WiFi, STEMMA QT, LiPoly charging, and MAX17048 — no PSRAM variant for leaner memory budgets. [Details](https://openhardware.directory/devices/adafruit-esp32-s3-feather-8mb) | [Markdown](https://openhardware.directory/devices/adafruit-esp32-s3-feather-8mb/md) ## Adafruit QT Py ESP32 Pico QT Py-sized classic ESP32 board with ESP32-PICO-V3-02, 8 MB flash, 2 MB PSRAM, WiFi, dual-core, Bluetooth Classic + BLE, STEMMA QT, and 13 GPIO — without native USB. [Details](https://openhardware.directory/devices/adafruit-qt-py-esp32-pico) | [Markdown](https://openhardware.directory/devices/adafruit-qt-py-esp32-pico/md) ## TinyS3 ESP32-S3 Ultra-compact ESP32-S3 dev board by Unexpected Maker in the TinyPICO form factor — dual-core 240 MHz LX7, 8 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 17 GPIO, LiPo charging at 35 × 17.8 mm. [Details](https://openhardware.directory/devices/tinys3-esp32-s3) | [Markdown](https://openhardware.directory/devices/tinys3-esp32-s3/md) ## Pycom WiPy 3.0 ESP32-based MicroPython IoT module with 802.11b/g/n WiFi, Bluetooth LE and Classic, 8MB flash, 4MB RAM, and ultra-low power ULP co-processor for deep-sleep GPIO monitoring at 25 µA. [Details](https://openhardware.directory/devices/pycom-wipy-30) | [Markdown](https://openhardware.directory/devices/pycom-wipy-30/md) ## Pycom LoPy 1.0 ESP32-based MicroPython module combining 802.11b/g/n WiFi, Bluetooth, and LoRa/LoRaWAN (868/915 MHz) in one board. Can act as a nano LoRa gateway and is 100% Python programmable for multi-protocol IoT deployments. [Details](https://openhardware.directory/devices/pycom-lopy-10) | [Markdown](https://openhardware.directory/devices/pycom-lopy-10/md) ## Adafruit QT Py ESP32-S3 Tiny dual-core ESP32-S3 dev board in the QT Py / Seeed XIAO footprint — 8 MB flash, WiFi, BLE 5, native USB-C, STEMMA QT, 13 GPIO, 10 ADC inputs, no PSRAM variant. [Details](https://openhardware.directory/devices/adafruit-qt-py-esp32-s3) | [Markdown](https://openhardware.directory/devices/adafruit-qt-py-esp32-s3/md) ## ESP32-C6 DevKitC-1-N8 Official Espressif development board featuring the ESP32-C6 — a RISC-V single-core MCU with WiFi 6, BLE 5.0, Zigbee 3.0, Thread 1.3, and native Matter support. 8MB flash, USB-C JTAG/serial. [Details](https://openhardware.directory/devices/esp32-c6-devkitc-1) | [Markdown](https://openhardware.directory/devices/esp32-c6-devkitc-1/md) ## Adafruit ItsyBitsy ESP32 Ultra-compact ESP32 development board in the ItsyBitsy form factor with WiFi, Bluetooth Classic + BLE, USB-C, and LiPo charging — perfect for space-constrained wireless projects. [Details](https://openhardware.directory/devices/adafruit-itsybitsy-esp32) | [Markdown](https://openhardware.directory/devices/adafruit-itsybitsy-esp32/md) ## Adafruit Matrix Portal S3 ESP32-S3 board designed to drive HUB75 LED matrix panels directly, with built-in WiFi, BLE 5.0, native USB, STEMMA QT connector, and two user buttons — ideal for dynamic digital signage and LED art displays. [Details](https://openhardware.directory/devices/adafruit-matrix-portal-s3) | [Markdown](https://openhardware.directory/devices/adafruit-matrix-portal-s3/md) ## Adafruit Feather ESP32-S3 Feather-format ESP32-S3 board with native USB, WiFi, BLE 5.0, 8MB flash, LiPo charging, and full Feather ecosystem compatibility — a capable wireless development platform for CircuitPython and Arduino projects. [Details](https://openhardware.directory/devices/adafruit-feather-esp32-s3) | [Markdown](https://openhardware.directory/devices/adafruit-feather-esp32-s3/md) ## M5Stack StamPLC ESP32-S3 industrial PLC controller with 1.14" IPS LCD, 4 relays, 8 opto-isolated inputs, RS-485, CAN bus, INA226 power monitor, RTC, buzzer, microSD, and DIN-rail mounting in a compact enclosure. [Details](https://openhardware.directory/devices/m5stack-stamplc) | [Markdown](https://openhardware.directory/devices/m5stack-stamplc/md) ## M5Stack AtomS3R Ultra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD, BMI270 IMU, BMM150 magnetometer, 8MB PSRAM, IR transmitter, LP5562 RGB LED driver, and Grove port for IoT and robotics. [Details](https://openhardware.directory/devices/m5stack-atoms3r) | [Markdown](https://openhardware.directory/devices/m5stack-atoms3r/md) ## Heltec Wireless Bridge ESP32 + SX1276 LoRa multi-protocol bridge in an aluminum enclosure, converting between WiFi, Bluetooth, and LoRa with 8MB flash and 8MB PSRAM. [Details](https://openhardware.directory/devices/heltec-wireless-bridge) | [Markdown](https://openhardware.directory/devices/heltec-wireless-bridge/md) ## Heltec Wireless Tracker ESP32-S3 development board with integrated SX1262 LoRa transceiver, UC6580 dual-frequency GNSS receiver, and 0.96-inch TFT display for IoT asset tracking, Meshtastic mesh networking, and LoRaWAN applications. [Details](https://openhardware.directory/devices/heltec-wireless-tracker) | [Markdown](https://openhardware.directory/devices/heltec-wireless-tracker/md) ## Heltec Wireless Stick V3 Compact ESP32-S3 development board with integrated SX1262 LoRa transceiver and 0.49-inch OLED display. Supports Meshtastic, LoRaWAN, WiFi, and BLE 5.0 in a breadboard-friendly form factor with battery management. [Details](https://openhardware.directory/devices/heltec-wireless-stick-v3) | [Markdown](https://openhardware.directory/devices/heltec-wireless-stick-v3/md) ## Arduino Nano ESP32 Arduino Nano form factor powered by ESP32-S3 with WiFi 802.11 b/g/n, Bluetooth LE 5.0, dual-core Xtensa LX7 at 240MHz, 8MB flash, 512KB SRAM, USB-C, and HID support — Arduino's compact IoT powerhouse with MicroPython support. [Details](https://openhardware.directory/devices/arduino-nano-esp32) | [Markdown](https://openhardware.directory/devices/arduino-nano-esp32/md)