UART
525 devicesBrowse development boards with UART interface for GPS, cellular modem, and debug communication.
LILYGO T-Deck Plus
Dev BoardESP32-S3 handheld dev board with QWERTY keyboard, trackball, 2.8" IPS LCD, LoRa SX1262, GPS, speaker, dual microphones, and 2000mAh battery in an ABS case.
LILYGO T3 LoRa32 V1.6.1
Dev BoardESP32-PICO-D4 development board with LoRa SX1276/SX1278 radio, 0.96\" SSD1306 OLED, microSD slot, WiFi, Bluetooth 4.2, and LiPo battery support in a compact 66×36mm form factor.
LILYGO T-Lite W5500
ESP32Ultra-compact ESP32 development board with W5500 SPI Ethernet, 0.96" OLED display, Wi-Fi, Bluetooth 4.2, and USB-C. Only 29.5×23mm for embedded IoT gateway projects.
LILYGO T-Display
Dev BoardCompact ESP32-PICO-D4 development board with integrated 1.14-inch ST7789V IPS LCD (135×240, 260 PPI), WiFi, Bluetooth 4.2/BLE, and Arduino/MicroPython support.
LILYGO T-Beam
Dev BoardESP32 development board combining LoRa radio (SX1276/SX1278), u-blox NEO-6M GPS, 0.96" OLED display, and 18650 battery support — the go-to board for Meshtastic and LoRa tracking projects.
LILYGO T-QT Pro
Dev BoardUltra-compact ESP32-S3 board with a 0.85-inch GC9107 IPS display (128×128), 2MB PSRAM, WiFi, BLE 5.0, and USB-C — one of the smallest ESP32-S3 development boards available.
LILYGO T-Display S3
Dev BoardESP32-S3 development board with 1.9-inch ST7789V TFT display (170×320), optional capacitive touch, 16MB flash, 8MB PSRAM, and USB-C. Popular for smart displays and IoT dashboards.
LILYGO T-SIM7000G
Dev BoardESP32 board with SIMCom SIM7000G multi-band LTE-M/NB-IoT modem, GPS, 8MB PSRAM, USB-C, and 18650 battery support — designed for global cellular IoT deployments.
LILYGO T-Higrow
Dev BoardESP32 plant sensor board with capacitive soil moisture, soil fertility, BH1750 light sensor, and DHT11/BME280 temperature/humidity — WiFi-connected smart plant care for gardens and greenhouses.
Mesh Detect 2
Sensor ModuleOpen-source ESP32-S3 device that detects FAA Remote ID drone broadcasts and BLE devices, reporting alerts over the Meshtastic LoRa mesh network. Uses XIAO ESP32-S3 + Heltec V3.
LILYGO T-Display S3 AMOLED
Dev BoardESP32-S3 board with 1.91-inch RM67162 AMOLED display (240×536), optional touch, 16MB flash, 8MB PSRAM, and USB-C — delivering vivid OLED visuals for IoT dashboards and smart displays.
LILYGO T-Call SIM800
Dev BoardESP32 board with SIM800L 2G GSM/GPRS modem for SMS alerts, voice calls, and cellular data — ideal for remote monitoring and IoT projects needing cellular fallback on a budget.
LILYGO T-Pico C3
Dev BoardDual-MCU board combining RP2040 and ESP32-C3, with a 1.14-inch ST7789V display, WiFi, BLE 5.0, and Arduino/MicroPython support — bringing Raspberry Pi Pico connectivity to wireless IoT projects.
LILYGO T-Dongle S3
Dev BoardESP32-S3 USB-A dongle with a 0.96-inch ST7735 color display (80×160), 16MB flash, WiFi, and BLE 5.0 — a compact plug-in development stick for IoT, media, and wireless sensor nodes.
LILYGO T-Micro32 Plus
ESP32LILYGO T-Micro32 Plus is an upgraded compact ESP32 module with 8MB flash, 2MB PSRAM, expanded GPIO, and an improved RED C3 ceramic antenna for stronger wireless performance.
LILYGO T-RGB
Dev BoardESP32-S3 board with a circular 2.1\" or 2.8\" ST7701S RGB display (480×480) and capacitive touch — perfect for smart home controllers, round-display clocks, and interactive dashboards.
LILYGO T-Camera S3
Dev BoardESP32-S3 camera development board with OV2640 2MP sensor, 0.96-inch OLED display, 16MB flash, 8MB PSRAM, WiFi, and BLE 5.0 — a ready-to-use platform for WiFi streaming cameras and computer vision proj
LILYGO T-Echo
Dev BoardnRF52840 + SX1262 LoRa + L76K GPS all-in-one board with 1.54-inch e-paper display, 850mAh battery, Thread, Zigbee, and BLE 5.0 — runs Meshtastic, SoftRF, and custom NRF firmware out of the box.
LILYGO T-Internet-POE
Dev BoardESP32 board with LAN8720 10/100 Mbps Ethernet, Power-over-Ethernet (PoE 36–57V), WiFi, and BLE 4.2 — ideal for wired IoT gateways, industrial automation, and network-connected data loggers.
LILYGO T-Deck
Dev BoardESP32-S3 handheld terminal with 2.8-inch IPS display, mini QWERTY keyboard, trackball, optional SX1262 LoRa, speaker, and microphone — a self-contained portable communicator running Meshtastic and Mes
LILYGO T-HMI
Dev BoardESP32-S3 HMI development board with a 2.8-inch resistive touchscreen, GROVE connectors, 16MB flash, 8MB PSRAM, and USB-C — designed for industrial HMI panels and interactive control interfaces.
LILYGO T-ETH-Lite
Dev BoardCompact ESP32-S3 development board with wired Ethernet (W5500 SPI), WiFi, BLE, microSD slot, and optional PoE and camera shields for reliable networked IoT edge nodes.
LILYGO T-Halow
Dev BoardESP32-S3 development board with WiFi HaLow (802.11ah) sub-GHz radio for long-range IoT deployments, plus standard 2.4GHz WiFi, BLE 5.0, microSD, and 18650 battery support.
LILYGO T-Display S3 Pro
Dev BoardUpgraded T-Display S3 with a larger 2.33" IPS touchscreen, ESP32-S3R8, OTG charging via SY6970, QWIIC ports, ambient light/proximity sensor, and optional camera module expansion via POGOpin.
LILYGO T-Display S3 AMOLED 1.64
ESP32 S3ESP32-S3 development board with a 1.64" ICNA3311 AMOLED display at 280×456 resolution, 16MB Flash, 8MB PSRAM, Wi-Fi and Bluetooth 5 LE connectivity.
LILYGO T-TWR
Dev BoardESP32-S3 walkie-talkie development board with SA868 UHF/VHF radio module, 0.96" OLED display, rotary encoder, WiFi, BLE, and 18650 battery support for two-way radio projects.
LILYGO T-Beam Supreme
Dev BoardUpgraded T-Beam with ESP32-S3FN8, QMI8658 6-axis IMU, LoRa SX1262, dual GPS options (L76K or u-blox), SoftRF firmware support, and multi-frequency bands for Meshtastic and aircraft tracking.
LILYGO T-Display S3 AMOLED Plus
ESP32 S3Enhanced ESP32-S3 AMOLED development board with 1.91" RM67162 display, onboard RTC, PMU, SD card slot, capacitive touch, metal shielding, and external FPC antenna.
LILYGO T-Deck Pro
Dev BoardESP32-S3 keyboard terminal with 3.1" e-paper touchscreen, LoRa SX1262, GPS, BHI260AP AI IMU, PCM5102A/ES8311 audio, 1400mAh battery, and optional 4G LTE (A7682E) for off-grid terminal applications.
LILYGO T-TWR Plus
Dev BoardEnhanced ESP32-S3 two-way radio board with SA868 UHF/VHF module, L76K GNSS, 1.3" OLED, AXP2102 PMIC, WS2812 RGB LED, TF card, and PPT button for APRS and walkie-talkie applications.
LILYGO T-Embed CC1101
Dev BoardESP32-S3 multi-protocol RF tool with CC1101 sub-GHz transceiver (300–928 MHz), 13.56 MHz RFID, IR transmit/receive, 1.9" IPS display, and rotary encoder for RF analysis and replay attacks.
LILYGO T7 S3
Dev BoardUltra-affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, USB 3.0, QWIIC/Stemma QT connector, power switch, and breadboard-compatible pinout at under $8.
LILYGO T-CAN485
Dev BoardESP32 development board with integrated CAN bus and RS-485 transceivers, TF card, WiFi, and BLE for industrial IoT, Modbus, and automotive OBD-II applications with 5–12V wide-range power input.
LILYGO T-QT C6
Dev BoardTiny ESP32-C6 dev board with WiFi 6, BLE 5, Zigbee/Thread (802.15.4), 0.85" 128×128 touchscreen, LiPo battery charging, and breathing LED in a thumbnail-sized form factor.
LILYGO T-Relay S3
Dev BoardESP32-S3 board with 6 onboard relays, 16MB flash, 8MB PSRAM, WiFi, and BLE for ESPHome smart home automation, controlling lights, appliances, and HVAC systems.
LILYGO T-Energy S3
Dev BoardAffordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, integrated 18650 battery holder, WiFi, and BLE 5.0 for battery-powered IoT sensor nodes under $10.
LILYGO T-Knob
Dev BoardSmart rotary encoder controller based on ESP32-C6 with WiFi 6, BLE 5, Zigbee/Thread, 4 RGB LEDs, buzzer, and magnetic Hall-effect knob for wireless volume control and smart home automation.
LILYGO T-Panel S3
Dev BoardDual-MCU smart panel (ESP32-S3 + ESP32-H2) with 4" 480×480 IPS LCD (ST7701S), WiFi, BLE, native Zigbee/Thread/Matter via H2 co-processor, and optional RS485/CAN FD expansion for wall-mounted smart hom
LILYGO T3 S3
Dev BoardESP32-S3 LoRa development board with 0.96" OLED display, multiple LoRa module options (SX1262/SX1276/SX1280/LR1121), WiFi, BLE, and 18650 battery support for Meshtastic and IoT applications.
LILYGO T-SIM7070G
ESP32ESP32-WROVER-E development board with SIM7070G NB-IoT/LTE-M/GPRS modem, GPS, Wi-Fi, Bluetooth 4.2, MicroSD, and solar charging input for ultra-low-power IoT applications.
LILYGO T-Display AMOLED Lite
ESP32 S3Compact ESP32-S3 development board featuring a 1.47" RM67162 AMOLED display with QSPI interface, 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and battery charging support.
LILYGO T-Display Keyboard
ESP32Compact ESP32 development board combining a physical keyboard with a 1.14" IPS display, USB-C charging, multiple interfaces, and optional 2800mAh battery in shell configuration.
LILYGO T5s 2.7 inch E-Paper
ESP32LILYGO T5s is an ESP32 development board with a 2.7-inch 264×176 e-paper display, onboard I2S audio (MAX98357A amplifier + ICS43434 MEMS mic), 500mA battery management, and TF card support.
LILYGO T8-C3
ESP32 C3LILYGO T8-C3 is a compact ESP32-C3 development board featuring Wi-Fi, BLE 5.0, 4MB flash, TF card slot, and USB Type-C, requiring the T-U2T adapter for programming.
LILYGO T-FPGA
FPGALILYGO T-FPGA is a development board combining an ESP32-S3 microcontroller with a Gowin GW1NSR-4C FPGA chip, enabling flexible hardware logic design alongside Wi-Fi and Bluetooth connectivity.
LILYGO T-Keyboard S3 Pro
ESP32 S3Advanced ESP32-S3 programmable keyboard board with 4 built-in 0.85" TFT displays, 14 RGB LEDs, rotary encoder, STM32 co-processor, magnetic connectors for daisy-chaining up to 6 units.
LILYGO T-Lora C6
Dev BoardLILYGO T-Lora C6 is a compact LoRa development board combining the ESP32-C6 module with SX1262 radio, supporting Wi-Fi 6, Bluetooth 5 LE, Zigbee, Thread, and sub-GHz LoRa communication.
LILYGO T-OI Plus
ESP32 C3LILYGO T-OI Plus is a compact ESP32-C3 development board with Wi-Fi, BLE 5.0, Grove connectors, and optional 16340 battery holder, designed to fit Sonoff BASICR2 enclosures.
LILYGO T-Display S3 Long
ESP32 S3ESP32-S3 development board with an elongated 3.4" capacitive touch TFT LCD (180×640 resolution), 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and optional enclosure variant.
LILYGO T5 2.13inch E-Paper
ESP32LILYGO T5 2.13inch E-Paper is an ESP32-D0WDQ6 V3 development board with a 2.13-inch 212×104 e-ink display supporting 4-level grayscale, 4MB flash, TF card slot, and battery management with 4 user butt
LILYGO T-SIM7600E
ESP32ESP32-based development board with SIM7600E-H 4G LTE Cat-4 modem, GPS, Wi-Fi, Bluetooth, 18650 battery holder with solar charging, and dual USB-C ports for high-speed IoT connectivity.
LILYGO T-Relay
ESP32ESP32 development board with 4 onboard HRS4H-S-DC5V relays, 4MB flash, 8MB PSRAM, WiFi, BLE 4.2, and optocoupler-isolated GPIO expansion — designed for wireless remote switch control of AC/DC loads.
LILYGO T-Echo Plus
Dev BoardEnhanced T-Echo with nRF52840, SX1262 LoRa, L76K GPS, BHI260AP IMU, 2400mAh battery, 1.54-inch e-paper display, vibration motor, buzzer, and 1/4-inch mount — Meshtastic-ready with extended runtime.
LILYGO T-01C3
ESP32 C3LILYGO T-01C3 is an ultra-compact ESP32-C3 RISC-V module with Wi-Fi and BLE 5.0, available with or without pre-soldered pins, featuring 5.33µA deep sleep current.
LILYGO T-Keyboard
ESP32 C3Compact ESP32-C3 keyboard terminal with a built-in 0.99" display, Wi-Fi, Bluetooth 4.2, 400mAh battery, and a 3D-printed shell for portable wireless input applications.
LILYGO T-Wrist E-Paper
ESP32LILYGO T-Wrist E-Paper is an ESP32-based wearable development board with a 1.54-inch 200×200 e-paper display, vibration motor, optional GPS (LG77 GNSS), WiFi, Bluetooth 4.2, and 3D-printable watch she
LILYGO FabGL VGA32
ESP32ESP32 development board with VGA video output, dual PS/2 ports for keyboard and mouse, 4MB flash, and the FabGL graphics library — a retro computing platform for VGA terminal emulators and classic gam
OpenEPaperLink Access Point C6+S3
Access PointOpen-source dual-MCU access point for wirelessly managing e-paper tags. ESP32-C6 handles WiFi connectivity while ESP32-S3 serves as a 2.4GHz RF transceiver for IEEE 802.15.4 communication with electro
LILYGO T-Weigh
ESP32ESP32 development board combining 4-channel HX711 load cell amplifiers with LoRa SX1262 radio (868/915 MHz) for wireless weight measurement and IoT scale applications over long-range LoRa networks.
LILYGO T-Echo Lite
Dev BoardSimplified T-Echo with nRF52840, SX1262 LoRa, and optional L76K GPS — a low-cost, low-power LoRa node and Meshtastic-compatible board for off-grid mesh networking.
LILYGO T-SIM A7670E
ESP32ESP32-WROVER-E development board with A7670E LTE Cat-1 modem supporting voice calls, SMS, and GPS positioning. Available with multiple regional frequency variants for global 4G deployments.
LILYGO T-Micro32 V2.0
ESP32LILYGO T-Micro32 V2.0 is a 45%-smaller ESP32 PICO-D4 module with integrated IPEX antenna connector, designed for space-constrained embedded product designs.
LILYGO T-Mini E-Paper S3
ESP32 S3LILYGO T-Mini E-Paper S3 is a compact ESP32-S3 board with a 1.02-inch 128×80 e-paper display, 4MB flash, 2MB PSRAM, WiFi, BLE 5, TF card slot, and support for 18350 battery. Available in 868MHz and 91
LILYGO T4
ESP32LILYGO T4 is an ESP32 development board with 8MB PSRAM, optional 2.2 or 2.4-inch ILI9341 TFT LCD display, Wi-Fi, Bluetooth 4.2 BLE, and Li-Po battery support.
LILYGO T-SimCam
ESP32 S3ESP32-S3 camera development board with mPCIe slot for LILYGO T-PCIE SIM cellular modules, supporting OV2640 or OV5640 cameras, 16MB flash, 8MB PSRAM, TF card, and I2S microphone for connected vision a
LILYGO T-Encoder Pro
Dev BoardESP32-S3 smart rotary encoder knob with 1.2-inch round AMOLED display, capacitive touch, buzzer, vibration motor, and dual Qwiic connectors — ideal for smart home control and media interfaces.
LILYGO T-Micro32 S3
ESP32 S3LILYGO T-Micro32 S3 is an ultra-compact ESP32-S3FH4R2 module with Wi-Fi, BLE 5.0, 4MB flash, 2MB PSRAM, and dual-core Xtensa LX7 processor in a minimal footprint.
LILYGO T-A7608E-H
ESP32ESP32-WROVER-E development board with A7608E-H LTE Cat-1 modem supporting voice, SMS, GPS, and multi-band LTE-FDD/TDD connectivity for Europe with 18650 battery support.
LILYGO T-TWR Rev2.1
Dev BoardLILYGO T-TWR Rev2.1 is an ESP32-S3 based programmable walkie-talkie board featuring the SA868 UHF/VHF radio module, GPS, OLED display, and battery support for amateur radio applications.
LILYGO T-TV
ESP32ESP32 desktop gadget with a 1.54-inch transparent blue OLED display, IR receiver, touch control, Wi-Fi, and Bluetooth. Ships with factory firmware featuring a clock, games, and animations.
LILYGO T-Internet-COM
ESP32ESP32 development board with LAN8720 Ethernet, 16MB flash, 8MB PSRAM, WS2812 RGB LED, SIM/TF card slots, and T-PCIE expansion support for industrial IoT, wired networking, and CAN bus applications.
LILYGO T3 S3 E-Paper
ESP32 S3LILYGO T3 S3 E-Paper is an ESP32-S3 LoRa development board with a 2.13-inch 250×122 e-paper display (DEPG0213BN), 4MB flash, 2MB PSRAM, WiFi, BLE 5, SX1262 LoRa transceiver, and LiPo battery support.
LILYGO T-Lion
ESP32ESP32-WROVER development board with 0.96-inch OLED display, five-way directional button, single 18650 battery holder, 8MB PSRAM, WiFi, and BLE 4.2 — a compact handheld IoT controller in a slim form fa
LILYGO T-Connect
Dev BoardESP32-S3 industrial communication board with three RS485 ports and one CAN bus — enables multi-protocol data switching for automation, sensor networks, and legacy equipment integration.
LILYGO T-Camera Plus S3
ESP32 S3ESP32-S3 camera development board with 8MB PSRAM, 16MB Flash, onboard microphone, MAX98357A I2S amplifier, speaker output, and choice of OV2640 or OV5640 camera sensor for audio-visual IoT application
LILYGO LoRa3 (T3 LoRa32 V1.6.1)
ESP32LILYGO LoRa3 (T3 LoRa32 V1.6.1) is an ESP32 development board combining Wi-Fi, BLE, and LoRa radio (SX1276/SX1278) with OLED display and TF card slot for IoT and mesh networking.
LILYGO T-Watch 2021
ESP32Programmable ESP32 smartwatch with 1.3-inch round GC9A01 IPS touchscreen (240×240), BMA423 accelerometer, vibration motor, RTC, WiFi, and BLE 4.2 — open-source and fully programmable with Arduino or M
LILYGO T-SIM7670G S3
ESP32 S3ESP32-S3-based development board with SIM7670G LTE Cat-1 modem, integrated GPS, Wi-Fi, Bluetooth 5, MicroSD, solar charging input, and 16 MB flash for high-performance IoT and asset tracking applicati
LILYGO T-Journal
ESP32Compact ESP32-PICO-D4 camera board with OV2640 2MP sensor, 0.91-inch SSD1306 OLED display, fisheye or normal lens options, WiFi, BLE, and LiPo battery support — a minimal wireless camera module for Io
PicoGlitcher V3
Security ToolOpen-source voltage glitching tool for hardware security research, based on Raspberry Pi Pico 2 (RP2350) with dual high-power MOSFETs, 4 selectable voltage levels, and adjustable Schmitt trigger input
LILYGO T7 V1.3 Mini32 ESP32
ESP32Compact ESP32 development board (Mini32 form factor) with 4MB Flash, WiFi 802.11 b/g/n, Bluetooth 4.2, CH340C USB-to-serial, TP4054 LiPo charger, and 1.25mm JST battery connector — a classic breadboar
LILYGO T5 E-Paper S3 Pro
ESP32 S3LILYGO T5 E-Paper S3 Pro is an ESP32-S3 board with a 4.7-inch 16-greyscale e-paper display, SX1262 LoRa, touch input, RTC, BQ25896/BQ27220 battery management, 16MB flash, 8MB PSRAM, and optional GPS.
LILYGO T-Display P4
ESP32 P4High-performance ESP32-P4 development board with dual-core 360MHz RISC-V, 4.1" AMOLED or 4.05" TFT touchscreen, 2MP camera, SX1262 LoRa, GPS, 9-axis IMU, and ESP32-C6 for Wi-Fi 6 and Bluetooth 5.
LILYGO T-Connect Pro
Dev BoardESP32-S3 three-board stack with SX1262 LoRa, CAN, RS485, RS232, Ethernet (W5500), relay, capacitive touch LCD, and DC input — a versatile industrial IoT gateway with long-range wireless.
LILYGO ESP32-S2 WOOR
ESP32 S2Compact ESP32-S2-WROOM module-based development board with 4MB Flash, 320KB SRAM, native USB OTG, WiFi 802.11 b/g/n, onboard LiPo charging, and BOOT/RESET buttons for USB HID and IoT prototyping.
LILYGO T-Track
ESP32 S3ESP32-S3R8 development board with a 1.1-inch JD9613 AMOLED display (126×294), onboard trackball, 16MB flash, 8MB PSRAM, WiFi, and BLE 5 — a compact touchless navigation dev kit for creative UI and int
LILYGO LoRa V1.3
ESP32LILYGO LoRa V1.3 is an ESP32 development board with SX1276 LoRa radio at 868/915 MHz, optional 0.96-inch OLED display, Wi-Fi, BLE, and 4MB flash for IoT and LoRa applications.
LILYGO T7 Mini32 V1.5
ESP32Updated ESP32 Mini32 development board with 8MB PSRAM, 4/16MB Flash options, dual-core 240MHz, CH9102 USB-serial, WiFi, BLE 4.2, and 1.25mm JST LiPo connector in a 40×31mm breadboard-friendly footprin
LILYGO T-Display K230
K230AI-capable development board powered by KENDRYTE K230 dual-core 64-bit RISC-V SoC running at 1.6GHz with KPU neural network accelerator, 4.1" AMOLED display, and LoRa connectivity in multiple frequenc
LILYGO T-2CAN
Dev BoardLILYGO T-2CAN is an ESP32-S3 development board featuring dual CAN bus interfaces via two TWAI controllers, Wi-Fi, Bluetooth 5 LE, and wide DC input range for automotive and industrial applications.
LILYGO ESP32 OLED V3.0
ESP32ESP32 development board with integrated 0.96-inch SSD1306 OLED display, 4MB Flash, 520KB SRAM, WiFi, Bluetooth dual-mode, USB-C, and onboard LiPo battery charging for compact IoT display projects.
LILYGO T-Vending
ESP32 S3ESP32-S3-WROOM-1 development board with MAX13487E RS-485 transceiver, T-PCIE SIM expansion slot, Grove connector, WiFi, and BLE — designed for vending machine control and industrial RS-485 communicati
LILYGO TO-ESP8266 OLED SH1106
ESP8266ESP8266 development board with 1.3-inch SH1106 OLED display, 8 digital I/O pins, CH9102 USB-serial, 3.3V operation, WiFi 802.11 b/g/n, and JST 1.25mm LiPo connector — supports ESPHome and Tasmota firm
Open AIR Mini
IoT ControllerOpen-source ESP32-based ventilation controller for Ducobox Silent/Focus and Orcon MVS-15xx systems with optional CO2, humidity, VOC, and NOx sensors, fully compatible with ESPHome and Home Assistant.
LILYGO T-PoE Pro
ESP32ESP32-WROVER-E development board with LAN8720 Ethernet, IEEE 802.3 af/at Power over Ethernet (5V@4A, 44–57V input), 16MB flash, 8MB PSRAM, WiFi, BLE 4.2, and expandable LCD interface for wired IoT gat
LILYGO T4 S3
ESP32 S3LILYGO T4 S3 is an ESP32-S3 development board with a 2.41-inch AMOLED touchscreen (450x600), 16MB flash, 8MB PSRAM, microSD slot, Wi-Fi, and Bluetooth 5 LE.
LILYGO Helium T-Beam
Dev BoardESP32 + SX1276 LoRa T-Beam variant optimized for the Helium IoT network — with NEO-6M GPS, AXP2101 PMU, and 18650 battery support for portable LoRaWAN network mapping and sensor nodes.
LILYGO ESP32-S2
ESP32 S2Pure ESP32-S2 development board with 4MB Flash, 8MB SRAM, native USB, WiFi 802.11 b/g/n, onboard LiPo charging, and multiple control buttons — a single-core Xtensa LX7 board for USB-HID and IoT applic
LILYGO T-Beam BPF
Dev BoardLILYGO T-Beam BPF is an ESP32-S3 LoRa development board variant featuring an onboard Band Pass Filter for improved RF selectivity, designed for the 144–148 MHz amateur radio band with GPS and OLED dis
LILYGO Module17 Revision 0.1E
Dev BoardSTM32-based M17 digital amateur radio modem board with DE-9 connector — implements the open-source M17 protocol for digital voice and data over amateur radio, compatible with OpenRTX firmware.
LILYGO T-ETH Elite
ESP32 S3High-end ESP32-S3 Ethernet development board with W5500 SPI Ethernet, Power-over-Ethernet support, 16MB flash, 8MB PSRAM, and modular LoRa/LTE expansion shield system.
LILYGO T-Beam 1W
Dev BoardLILYGO T-Beam 1W is an ESP32-S3 LoRa development board featuring a 1-watt LoRa power amplifier for significantly extended transmission range, with GPS support, AXP2101 PMU, and 18650 battery compatibi
LILYGO T3 S3 V1.3
ESP32 S3ESP32-S3 LoRa development board (hardware revision V1.3) with 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, WiFi, BLE 5.0, and support for SX1262/SX1276/SX1280/LR1121 radio modules at 433/868/915MHz a
LILYGO T-Dongle C5
Dev BoardCompact USB dongle with ESP32-C5 featuring dual-band WiFi 6 (2.4/5GHz), Bluetooth 5, 802.15.4, 0.96-inch LCD, TF card slot, and 16MB flash — the first LILYGO dongle with WiFi 6 support.
LILYGO T3 TCXO
ESP32ESP32 LoRa development board with a Temperature Compensated Crystal Oscillator (TCXO) for enhanced LoRa frequency stability, 0.96-inch SSD1306 OLED display, 4MB Flash, WiFi, BLE 4.2, TF card slot, and
LILYGO T-Relay 5V 8-Channel
ESP32ESP32-WROVER-E development board with 8 optocoupler-isolated 5V relay channels (HRS4H-S-DC5V), Wi-Fi, BLE 4.2, 8MB PSRAM, and support for DC 12–24V power input for industrial automation.
LILYGO T3 S3 LR1121
Dev BoardLILYGO T3 S3 LR1121 is an ESP32-S3 development board with a Semtech LR1121 multi-band transceiver supporting sub-GHz (830–940 MHz) and 2.4 GHz LoRa, plus a 0.96" OLED display and microSD card slot.
LILYGO T3 STM32
STM32STM32WL55CCU6 LoRa development board with dual Cortex-M4 + M0+ cores, built-in LoRa/FSK/MSK radio at 433/868/915MHz, 0.96-inch SSD1315 OLED, 256KB Flash, 64KB RAM, and open-source Arduino/STM32CubeIDE
LILYGO T-HaLow P4
Dev BoardESP32-P4 high-performance board with ESP32-C6 WiFi HaLow (802.11ah), 16MB flash, 8MB PSRAM, H.264 1080P video processing, MIPI-CSI/DSI, and BLE 5 — designed for long-range sub-GHz WiFi IoT application
LILYGO T3-S3 MVSR
ESP32 S3ESP32-S3 LoRa voice kit with MAX98357A speaker, MSM261S4030HOR microphone, vibration motor, RTC, 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, and SX1262/SX1276/SX1280 radio options — designed for LoR
LILYGO T-Touch Bar
ESP32 S3ESP32-S3 touch-sensitive bar display board with 8MB PSRAM, 16MB Flash, Wi-Fi, and Bluetooth 5, available in LED and AMOLED display variants for building custom HMI panels, smart home controls, and int
LILYGO T-Zigbee ESP32-C3 TLSR8258
Dev BoardDual-MCU Zigbee development board combining ESP32-C3 (WiFi/BLE) and Telink TLSR8258 (Zigbee/BLE Mesh) — both run simultaneously for bridging Zigbee sensor networks to WiFi/cloud platforms.
LILYGO T-SIM7600
ESP32ESP32 development board with SIM7600 LTE Cat-4 modem (150Mbps DL), GPS, 18650 battery holder with solar charging interface, and dual USB-C ports for high-speed cellular IoT applications.
LILYGO T-Call V1.4
ESP32ESP32 development board with SIM800L 2G GSM/GPRS cellular modem, Wi-Fi, Bluetooth 4.2, USB-C charging, and Li-Po battery connector for IoT devices requiring SMS and GPRS data connectivity.
LILYGO T-RS S3
ESP32 S3ESP32-S3 industrial communication board with isolated RS-232 and RS-485 modules (3000V isolation), 7–24V DC input via DB9 connector, Wi-Fi, and Bluetooth 5 LE for Modbus and industrial serial networki
LILYGO T-Encoder ESP32
ESP32Compact ESP32-PICO-V3-02 board with rotary encoder, WS2812 RGB LED ring, Wi-Fi, BLE 4.2, 8MB flash, and 2MB PSRAM. Ideal for knob-based UI controllers and volume/parameter controls.
LILYGO T-Bao
ESP32Dual-MCU development board combining ESP32 and KENDRYTE K210 RISC-V AI processor with OV2640 camera, 1.54" IPS touchscreen, I2S audio amplifier, motor driver, 6-axis IMU, and Wi-Fi for edge AI and rob
LILYGO T5 4.7-inch E-Paper V2.3
ESP32 S3ESP32-S3 e-paper development board with 4.7-inch 540×960 16-grayscale display (EDO47TC1), Wi-Fi, Bluetooth 5.0, PCF8563 RTC, 16MB flash, 8MB PSRAM, and optional capacitive touch overlay.
madflight FC3v2 RP2350B Flight Controller
Flight ControllerOpen-source flight controller board with RP2350B MCU, 10-DOF sensor suite (gyro, accelerometer, barometer, magnetometer), INA226 battery monitor, microSD with 4-bit SDIO, and DC-DC converter. 50.7x41.
LILYGO T-Dongle ESP32-S2
ESP32 S2USB-A dongle form factor board with ESP32-S2, 1.14-inch ST7789V IPS LCD, Wi-Fi, OTG, TF card slot, and Grove connector. Predecessor to the T-Dongle S3 series, ideal for portable USB IoT devices.
LILYGO T-Embed CC1101 Plus
ESP32 S3Enhanced ESP32-S3 handheld with CC1101 sub-GHz radio, nRF24L01 2.4GHz radio, 1.9" IPS LCD, IR transceiver, 16MB flash, 8MB SRAM. Upgraded version of T-Embed CC1101 with added 2.4GHz wireless module.
Waveshare LuckFox Nova
sbcAn ultra-compact Linux SBC powered by Rockchip RK3308B with quad-core Cortex-A35 at 1.3GHz, 512MB DDR3, 8GB eMMC, 100M Ethernet, optional Wi-Fi 6 and PoE, and an integrated audio codec with 8-channel
Waveshare ESP32-S3 Touch LCD 7
Dev BoardESP32-S3 dev board with 7" capacitive touch IPS display (800x480), CAN/RS485 interfaces, and battery support. Built for HMI panels, industrial control, and IoT dashboards.
Denky D4
IoT Sensor BoardOpen-source ESP32 Teleinfo reader board for French Linky energy meters. Pre-flashed with Tasmota, features USB-C, WiFi, QWIIC I2C port, and RGB LED. Reads both Standard and Historique TIC formats.
TimeHAT I226 NIC with PPS In/Out for RPi5
Raspberry Pi HatOpen-source Raspberry Pi 5 PCIe HAT with Intel I226 2.5G Ethernet NIC, dual SMA connectors for 1PPS input/output, built-in TCXO, and M.2 slot for GNSS modules. Ideal for PTP grandmaster clocks.
AVR-HF ADX-MI3
transceiverPre-built digital mode QRP transceiver for amateur radio, supporting FT8, FT4, JS8, and WSPR on HF bands from 160m to 6m with ~5W output, OLED display, and single USB-C cable operation.
M5Stack CoreS3
Dev BoardThird-generation M5Stack Core with ESP32-S3 dual-core 240MHz, 2.0\" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, RTC, 5
M5Stack Atom Lite
Dev BoardUltra-compact ESP32-PICO-D4 development board (24x24mm) with RGB LED, programmable button, IR transmitter, Grove port, and 6 GPIO pins. Supports Arduino, ESP-IDF, UIFlow, and MicroPython.
M5StickC Plus 2
Dev BoardCompact ESP32-PICO-V3-02 wearable dev board with 1.14" TFT LCD (135x240), 6-axis IMU (MPU6886), IR transmitter, microphone, buzzer, 200mAh battery, Wi-Fi and Bluetooth in a 48x24x13.5mm form factor.
M5Stack Core2
Dev BoardESP32-based IoT dev kit with 2.0" IPS capacitive touch display, 16MB flash, 8MB PSRAM, built-in mic, speaker, IMU, vibration motor, and 390mAh battery in a compact stackable enclosure.
M5Stack Cardputer-Adv
Dev BoardCredit-card-sized ESP32-S3 handheld computer with 56-key mechanical keyboard, 1.14" IPS display, BMI270 IMU, ES8311 audio codec, 1W speaker, MEMS microphone, IR transmitter, 1750mAh battery, Grove I2C
M5Stack AtomS3
Dev BoardUltra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD (128x128), 6-axis IMU, 8MB flash, Wi-Fi, BLE 5.0, USB-C, and Grove port. Ideal for IoT prototyping and embedded UI projects.
Heltec WiFi LoRa 32 V4
Dev BoardESP32-S3 based LoRa development board with built-in 0.96" OLED display, SX1262 LoRa transceiver, WiFi, BLE 5.0, USB-C, and LiPo battery charging. One of the most popular boards for Meshtastic.
M5Stack Dial
Dev BoardESP32-S3 smart rotary knob with 1.28" round GC9A01 touch display (240x240), rotary encoder, RFID reader (WS1850S), RTC (BM8563), buzzer, and 2 Grove ports for IoT control interfaces.
ESP32-CAM
Dev BoardESP32-based camera dev board with OV2640 2MP sensor, microSD slot, WiFi, Bluetooth, 4MB flash, and 520KB SRAM. Ideal for DIY security cameras, timelapse, and computer vision projects.
Holybro Pixhawk 6C
Flight ControllerOpen-source flight controller based on the Pixhawk FMUv6C standard. Features STM32H743 processor, dual redundant IMUs, barometer, and magnetometer. Runs ArduPilot or PX4 autopilot firmware.
WT32-ETH01
Dev BoardESP32 module with built-in Ethernet (LAN8720A PHY), WiFi, and Bluetooth. Designed for wired IoT applications, gateways, and industrial automation where reliable network connectivity is essential.
SenseCAP Indicator D1
Dev BoardDual-MCU IoT development platform featuring ESP32-S3 and RP2040 processors with a 4-inch capacitive touchscreen, WiFi, BLE, optional LoRa, and multiple Grove sensor connectors for IoT prototyping.
Seeed XIAO ESP32S3 Plus
Dev BoardUltra-compact ESP32-S3 development board with OV2640 camera, digital microphone, 8MB PSRAM, 8MB flash, WiFi 802.11 b/g/n, BLE 5.0, extended GPIO, and battery charging — ideal for AI and IoT edge proje
M5Stack NanoC6
Dev BoardUltra-compact ESP32-C6 dev board by M5Stack with WiFi 6, BLE 5.0, Zigbee 3.0, and Thread/Matter support. RISC-V single-core at 160MHz, USB-C, RGB LED, and button in a tiny form factor.
M5Stack AtomS3 Lite
Dev BoardUltra-compact ESP32-S3 dev board (24x24mm) by M5Stack without display. Features WiFi, BLE 5.0, 8MB flash, Grove port, RGB LED, button, and USB-C in a tiny enclosure for IoT and embedded projects.
DFRobot FireBeetle 2 ESP32-S3 AIoT Camera
Dev BoardESP32-S3 development board with integrated OV2640 camera, 16MB flash, 8MB PSRAM, WiFi and BLE connectivity. Designed for AIoT applications, computer vision, and edge AI projects.
WT32-SC01 Plus
Dev BoardESP32-S3 development board with a 3.5" capacitive touch IPS LCD (480x320), 16MB flash, and 8MB PSRAM. Popular for building custom HMI/UI projects with LVGL, smart home panels, and IoT dashboards.
Prokyber AI-on-the-Edge-Cam
Dev BoardOpen-source ESP32-S3 camera board with PoE, microSD, and Stemma QT designed for AI-powered utility meter reading using the AI-on-the-edge-device firmware with TensorFlow Lite inference.
M5Stack Atom Echo S3R
Dev BoardESP32-S3 smart speaker dev kit with ES7210 audio codec, NS4168 amplifier, dual MEMS microphones, and RGB LED. Designed for Home Assistant voice assistant, ESPHome, and audio streaming projects.
DezKVM Go
KVM DeviceOpen-source KVM-over-USB device for controlling headless computers from your laptop. Features HDMI capture up to 1080p 25fps, virtual keyboard/mouse via USB HID, and a browser-based interface requirin
Waveshare ESP32-S3 Touch LCD 3.49
Dev BoardESP32-S3 dev board with 3.49" capacitive touch IPS display, dual microphone array, 6-axis IMU, RTC, and battery support. Ideal for wearable UIs and compact IoT dashboards.
ESP32-S3 Nano
Dev BoardCompact ESP32-S3 dev board by Waveshare in Arduino Nano form factor. Features dual-core 240MHz LX7, 16MB flash, 8MB PSRAM, WiFi, BLE 5.0, and USB-C. Drop-in ESP32-S3 upgrade for Nano-sized projects.
Sonoff BasicR2
Smart SwitchWiFi smart switch based on ESP8285, widely used in the open-source home automation community. Easily flashable with Tasmota or ESPHome for local-only smart home control without cloud dependency.
iCESugar-Pro FPGA Development Board
FPGAOpen-source Lattice ECP5 FPGA dev board with 24K LUTs, 32MB SDRAM, 32MB SPI flash, 106 GPIO pins in DDR SODIMM form factor. Supports fully open-source toolchain (Yosys + Nextpnr) and RISC-V Linux.
duckyPad Pro
macropad20-key open-source mechanical macropad with duckyScript engine, ESP32-S3, 1.5\" OLED, Bluetooth 5.0, hot-swap switches, dual rotary encoders, and microSD — a powerful Stream Deck alternative.
FaikOut WiFi Aircon Controller
IoT ControllerOpen-source ESP32-S3 WiFi controller for Daikin air conditioners with local-only control via MQTT and Home Assistant. Replaces cloud-dependent Daikin WiFi modules with privacy-first, no-internet-requi
CUBEEK CubeSat Educational Kit
Cubesat KitOpen-source 1U CubeSat educational kit powered by Arduino Pro Mini with LoRa communication, multi-sensor payload (IMU, barometer, GPS, temperature), solar-powered EPS, and ground station dashboard for
ESP32-DIV V2.0
Security ToolOpen-source multi-band wireless development toolkit with ESP32-U, 2.8" ILI9341 TFT display, 5 antennas, and SD card slot covering WiFi, BLE, 2.4GHz, and Sub-GHz frequency bands for security research a
Waveshare RoArm-M1
Robotic ArmESP32-based 5-DOF desktop robotic arm with high-torque serial bus servos, WiFi/Bluetooth control, motion recording, inverse kinematics, and ROS 2 support. Carbon fiber and aluminum construction.
Raspberry Pi Pico W
Dev BoardWireless microcontroller board featuring the RP2040 dual-core Cortex-M0+ processor with built-in WiFi 4 and Bluetooth 5.2 (BLE). Supports MicroPython, CircuitPython, and C/C++ development.
Waveshare RP2040-Zero
Dev BoardUltra-compact RP2040 microcontroller board in a tiny form factor. Features dual-core Cortex-M0+ at 133 MHz, USB-C, onboard WS2812 RGB LED, and castellated pads. Raspberry Pi Pico compatible.
Waveshare RoArm-M2-S
Robotic ArmESP32-based 4-DOF robotic arm with 360-degree base rotation, 500g payload at 300mm reach, dual-drive shoulder joint, 9-axis IMU, and ROS 2 + LeRobot compatibility. Under 850g total weight.
LOLIN D1 Mini V3
Dev BoardCompact WiFi development board based on the ESP8266-12F module. Features 4 MB flash, 11 digital I/O pins, Micro-USB, and a rich shield ecosystem. One of the most popular boards for IoT projects.
Waveshare RoArm-M3
Robotic ArmESP32-based 5+1 DOF robotic arm with 1kg payload, 360-degree base, dual-drive shoulder, 7 servos, 9-axis IMU, TF card slot, and ROS 2 + LeRobot support. Carbon fiber and aluminum build.
Blue Pill STM32F103C8T6
Dev BoardPopular low-cost development board based on the STM32F103C8T6 ARM Cortex-M3 microcontroller running at 72 MHz. Features 64 KB flash, 20 KB SRAM, and extensive peripheral support for embedded developme
Waveshare UGV Beast
robotOpen-source ROS2 AI robot with tracked chassis, Raspberry Pi 4B/5, ESP32 sub-controller, 5MP camera with pan-tilt, IMU, and support for LiDAR expansion. Programmable via Python, OpenCV, and ROS2.
SLAMTEC RPLiDAR A1
Sensor Module360-degree 2D laser scanner with 12m range and 8000 samples per second. Widely used for ROS robotics, SLAM mapping, and autonomous navigation applications.
DFRobot Maqueen Plus V3
robotAdvanced micro:bit STEM robot with 8x8 matrix laser ranging, 5 line-tracking sensors with intersection recognition, magnetic encoders, PID control, and 6 RGB LEDs. Programmable via MakeCode and MicroP
HuskyLens AI Camera
Ai CameraAI-powered vision sensor with built-in Kendryte K210 processor. Supports face recognition, object tracking, object recognition, line following, color recognition, and tag recognition via I2C or UART.
ACEBOTT QD001 Smart Robot Car
robotESP32-powered 4WD mecanum wheel robot car kit with ultrasonic, IR, and line-tracking sensors. Programmable via Arduino, ACECode, and Python. Expandable with camera, AI, tank, robot arm, and GPS packs.
Raspberry Pi 5
sbcThe latest Raspberry Pi single-board computer featuring a BCM2712 quad-core Cortex-A76 processor at 2.4GHz, PCIe 2.0, dual 4K HDMI output, USB 3.0, and available in 2GB, 4GB, 8GB, and 16GB RAM configu
Waveshare LuckFox Lyra Pi
sbcA compact Linux development board based on the Rockchip RK3506 with triple-core Cortex-A7 + Cortex-M0, 512MB DDR3L, dual Ethernet with PoE, optional Wi-Fi 6 and 4G LTE, and a 40-pin GPIO header.
DFRobot Maixduino AI Development Kit
Dev BoardRISC-V AI development board combining the Kendryte K210 AI processor with ESP32 for WiFi/BT connectivity. Includes camera and microphone for computer vision and voice recognition applications.
RFID RC522 Kit
moduleNXP MFRC522-based 13.56MHz RFID reader/writer kit with SPI interface, including reader module, MIFARE 1K card, and key fob. Ideal for access control and identification projects.
ESP8266 ESP-01S WiFi Module
ESP8266Compact ESP8266-based WiFi dev board with 1MB flash, 2 GPIO pins, and 802.11 b/g/n. Runs Arduino, MicroPython, ESPHome, and Tasmota firmware for smart home and IoT projects.
DFPlayer Mini MP3 Module
moduleCompact MP3/WAV/WMA audio player module with microSD slot, UART serial control, and built-in 3W amplifier — one of the most popular audio modules for Arduino and IoT projects.
LoRa A39-T230A30D1a SX1262 Module
moduleLong-range LoRa transceiver module with Semtech SX1262, UART interface, 1W output power, and up to 16km range at 210-241MHz. Ideal for remote telemetry and agricultural IoT.
Flipper Zero
Multi ToolPortable open-source multi-tool for hardware exploration, combining Sub-GHz, NFC, RFID 125kHz, infrared, iButton, BLE, and GPIO in a pocket-sized device with a 1.4" monochrome LCD.
FT232 USB to TTL Serial Adapter
moduleFTDI FT232RL-based USB-to-TTL serial adapter with selectable 3.3V/5V logic, 6-pin header, and full modem signals. Essential tool for programming Arduino, ESP8266, and other MCUs.
M5Stack UnitV2 AI Camera
Ai CameraLinux-based standalone AI camera with SigmaStar SSD202D dual-core Cortex-A7, GC4653 4MP sensor, 128MB RAM, WiFi, and USB-C. Runs Python and V-Training for edge AI.
M5Stack GPS Module V2.1
moduleATGM336H-based GPS/GNSS module supporting GPS, BeiDou, Galileo, GLONASS with external active antenna, DIP switch for TX/RX config, and PPS output.
Holybro Pixhawk 4
Flight ControllerOpen-source flight controller based on the Pixhawk FMUv5 standard. Features STM32F765 processor at 216MHz, triple redundant IMUs, barometer, and magnetometer. Runs ArduPilot or PX4 autopilot firmware.
Holybro M10 GPS
moduleu-blox M10 GPS module with IST8310 compass for Pixhawk flight controllers. Supports GPS, GLONASS, Galileo, and BeiDou constellations with onboard safety switch, buzzer, and LED indicator.
WiFi Devboard for Flipper Zero
ESP32 S2ESP32-S2-based WiFi development board for Flipper Zero enabling wireless firmware updates, Black Magic Probe debugging over USB and WiFi, and WiFi pentesting with PMKID capture and deauth capabilities
TinkerNav RTK GNSS Board
GNSS ReceiverOpen-source RTK GNSS board with SkyTraq PX1105R receiver and ESP32-S3 for centimeter-level positioning. Works as base station or rover with WiFi, Bluetooth LE, and optional LoRa connectivity.
Oui-Spy
Security ToolESP32-S3 based multi-mode BLE detection and security research tool with integrated piezo buzzer, MMCX antenna connector, and seven swappable firmware modes for surveillance detection, drone tracking,
Makerfabs ESP32 UWB DW3000
Dev BoardESP32 + DW3000 UWB development board for centimeter-accurate indoor positioning and ranging. Supports UWB channels 5 and 9, FiRa compatible, Apple U1 interoperable. WiFi and Bluetooth for data relay.
Evil Crow RF V2
Security ToolOpen-source RF security research tool with ESP32, dual CC1101 sub-GHz transceivers (300-928MHz), and NRF24L01 2.4GHz module for penetration testing, signal analysis, and replay attacks.
Louder ESP32
Audio BoardESP32 audio development board with TAS5805M I2S Class-D amplifier delivering 2x23W stereo output, designed for multi-room audio, network streaming, and smart home integration.
Gnat LoRa+GNSS Asset Tracker
Asset TrackerUltra-small (20x20mm), ultra-low-power LoRa/LoRaWAN + concurrent GNSS asset tracker by Tlera Corp, built on the Murata CMWX1ZZABZ-078 module with STM32L082 MCU, SX1276 LoRa radio, u-blox MAX-M8Q GNSS,
Grasshopper LoRaWAN Development Board
Dev BoardUltra-compact 18x45mm LoRaWAN development board from Tlera Corp featuring Murata's FCC-certified CMWX1ZZABZ-078 module with STM32L082 Cortex-M0+ MCU and SX1276 LoRa radio, drawing just 2 uA in stop mo
Elecrow ThinkNode M1
Meshtastic TransceiverCompact Meshtastic LoRa transceiver with nRF52840, SX1262, 1.54\" e-paper display, GPS, and 1200mAh battery for off-grid mesh communication.
HeishaMon Communication PCB
Communication PcbOpen-source ESP-based communication PCB for local monitoring and control of Panasonic Aquarea heat pumps via MQTT and HTTP, with Home Assistant integration and S0 energy metering support.
Armachat FLIP
Handheld MessengerPocket-sized open-source LoRa mesh messenger with ESP32-S3, RFM95 radio, 2.8" IPS display, and 36-key QWERTY keyboard. Runs Meshtastic and CircuitPython firmware for off-grid text communication.
TrackSenger
Dev BoardCompact Meshtastic-compatible LoRa communicator with push-button keyboard, built around the Heltec Wireless Tracker with ESP32-S3, SX1262 LoRa, GPS, and a 0.96" TFT display for off-grid mesh messaging
LuckFox Pico
Linux SbcUltra-compact Linux SBC (51x21mm) based on Rockchip RV1103 with ARM Cortex-A7 @ 1.2GHz, RISC-V MCU co-processor, 0.5 TOPS NPU, ISP 3.2, 64MB DDR2, MIPI CSI camera, and 24 GPIO pins in a Pico form fact
Wemos D1 Mini (ESP8266)
Dev BoardCompact ESP8266-based WiFi development board with 4MB flash, 11 digital I/O pins, micro-USB, and a rich shield ecosystem. The most popular board for Tasmota and ESPHome DIY home automation projects.
Sonoff NSPanel
Smart SwitchESP32-based smart wall switch with 3.5-inch capacitive touchscreen, dual relay outputs, temperature sensor, and buzzer. Flashable with Tasmota for custom LVGL/Berry interfaces and Home Assistant integ
Sonoff POW Elite 16A
Relay ModuleESP32-based WiFi smart switch with high-accuracy power monitoring via CSE7766, 16A relay, LCD display, and DIN-rail mounting. Flashable with Tasmota for local energy tracking and home automation.
Adafruit ESP32-C6 Feather
Dev BoardOpen-source Feather-form-factor ESP32-C6 board with WiFi 6, BLE 5, Thread, Zigbee, STEMMA QT, NeoPixel, LiPo charging with MAX17048, and CircuitPython support — $14.95.
Sonoff Dual R3
Relay ModuleESP32-based dual-relay WiFi smart switch with per-channel power monitoring, roller shutter mode, and 2×10A outputs. Ideal for motorized blinds with Tasmota shutter calibration and position tracking.
Sonoff Zigbee Bridge Pro
gatewayESP32-based Zigbee-to-WiFi gateway with CC2652P coordinator chip supporting 128 Zigbee devices. Flashable with Tasmota for local Zigbee bridge operation with Home Assistant via MQTT.
Olimex ESP32-POE
Dev BoardOpen-source ESP32 development board with built-in Ethernet, Power-over-Ethernet support, micro-SD card slot, and LiPo battery connector. Ideal for wired Tasmota nodes and industrial IoT applications.
Waveshare ESP32-P4-Pico
Dev BoardCompact Pico-form-factor development board based on the ESP32-P4 RISC-V dual-core processor at 400MHz with 32MB PSRAM, 32MB flash, MIPI-DSI/CSI interfaces, onboard ES8311 audio codec with NS4150B ampl
Adafruit ItsyBitsy M4 Express
Dev BoardHigh-performance compact board with ATSAMD51 Cortex M4F at 120MHz, 192KB RAM, 512KB flash, 2MB SPI flash, dual 12-bit DAC/ADC, 18 PWM outputs, AES-256 crypto, and native USB. Measures 36mm × 18mm.
DFRobot Beetle CM-32U4
Ultra-compact Arduino Leonardo-compatible microcontroller board with ATmega32U4, integrated lithium battery charging, and native USB in a tiny 22x20.5mm form factor.
DFRobot Beetle ESP32-C3
Coin-sized ESP32-C3 RISC-V IoT development board with WiFi, BLE 5.0, integrated LiPo charging, 13 GPIO pins, and USB-C in a 25x20.5mm form factor.
DFRobot Beetle Board
The original coin-sized Arduino Leonardo-compatible board with ATmega32U4, native USB, 10 digital and 5 analog pins, and sewable gold-plated pads in a 20x22mm form factor.
makerdiary nRF52840-MDK USB Dongle
nRF52840Open-source multi-protocol wireless USB dongle based on the Nordic nRF52840 SoC. Supports BLE 5.4, Thread, Zigbee, 802.15.4, NFC, and USB 2.0 with UF2 drag-and-drop bootloader. Priced at $12.99.
nice!nano v2 Wireless Keyboard Controller
nRF52840Pro Micro drop-in replacement wireless keyboard controller built on the nRF52840 with BLE 5.0, onboard LiPo charger, mid-mount USB-C, and UF2 bootloader. The most popular controller for ZMK wireless s
DFRobot Beetle ESP32
Compact ESP32 dual-core development board with WiFi, Bluetooth 4.2, sewable I/O pads, and wearable-friendly 35x34mm form factor for IoT and e-textile projects.
BeagleConnect Freedom
CC1352P7Open-source wireless IoT board with TI CC1352P7 dual-band radio (sub-GHz + 2.4 GHz), BLE 5.0, two mikroBUS sockets for 1,000+ Click boards, and Zephyr RTOS. Designed for long-range wireless sensor net
Waveshare WAVE ROVER
Robot PlatformFlexible 4WD mobile robot chassis with all-metal body, ESP32 controller, 0.91\" OLED, 9-axis IMU, 3S UPS power system, and open-source firmware. Supports Raspberry Pi and Jetson Nano as host computers
DFRobot Beetle RP2040
Compact RP2040 dual-core ARM Cortex-M0+ development board with USB-C, 8 GPIO pins, and beginner-friendly immersion gold pads in a 27x20mm form factor.
Waveshare RP2040-GEEK
A compact USB-A development board and debugging tool built around the RP2040 dual-core Cortex-M0+ MCU, featuring a 1.14-inch IPS LCD, microSD card slot, and exposed SWD, UART, and I2C connectors for p
DFRobot Beetle RP2350
Ultra-affordable RP2350 dual-architecture development board with switchable ARM Cortex-M33 / RISC-V cores, LiPo charging, 11 GPIO pins, and USB-C in a 25x20.5mm package.
Waveshare ESP32-C6-GEEK
Dev BoardCompact USB-A dongle development board with ESP32-C6 RISC-V MCU, 1.14\" IPS LCD, WiFi 6, BLE 5.0, Zigbee 3.0, Thread, and microSD slot for portable IoT projects.
Adafruit Feather M0 Basic Proto
Dev BoardFeather-format ATSAMD21 ARM Cortex-M0+ board at 48 MHz, 3.3V with 256KB flash, 32KB RAM, LiPo charging, native USB, 12-bit ADC/DAC, and RTC crystal — lightweight and CircuitPython-capable.
Waveshare UGV Rover
Robot PlatformOpen-source 6-wheel 4WD AI robot platform with dual-controller architecture (ESP32 + Raspberry Pi), computer vision, pan-tilt camera, ESP-NOW communication, and ROS2 support for robotics education and
Ai-Thinker Ra-09-DTU
DTUIntelligent wireless LoRaWAN DTU with isolated RS485 interface, powered by STM32WLE5CCU6 ARM Cortex-M4 MCU with integrated Sub-GHz radio. Wide 6-36V input for industrial deployment.
Adafruit Feather M0 Adalogger
Dev BoardFeather-format ATSAMD21 ARM Cortex-M0+ data logger at 48 MHz, 3.3V with microSD slot, 256KB flash, 32KB RAM, LiPo charging, native USB, and 12-bit ADC — 32-bit power for field data collection.
Waveshare ESP32-H2-Zero
Dev BoardUltra-compact castellated ESP32-H2 development board with BLE 5.2, Zigbee 3.0, Thread 1.3, and Matter support. USB-C powered with WS2812 RGB LED, 15 GPIO pins, and 4MB flash in a tiny 23.5 x 15.2mm fo
DFRobot Beetle BLE
Ultra-compact Arduino Uno-compatible board with BLE 4.0 (CC2540), ATmega328P, sewable gold-plated I/O pads, and wireless programming in a 28.8x33.1mm wearable form factor.
Adafruit Feather M0 RFM96 LoRa Radio (433 MHz)
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with RFM96 LoRa radio at 433 MHz. Spread-spectrum modulation for long-range links, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.
Waveshare RP2040-PiZero
A Raspberry Pi Zero form-factor development board based on the RP2040 dual-core Cortex-M0+ MCU with 16MB flash, Mini HDMI (DVI) output via PIO bitbanging, USB-C, PIO-USB host port, microSD card slot,
Waveshare RaspRover
Robot PlatformOpen-source 4WD AI robot with dual-controller architecture (ESP32 + Raspberry Pi), 5MP 160-degree camera, pan-tilt module, audio system, computer vision via OpenCV/MediaPipe, and ROS2 support for AI r
Waveshare Cobra Flex
Robot PlatformAll-metal modular drive-by-wire 4WD robot chassis with ESP32-S3 controller, hub motors with built-in FOC control, CNC metal suspension, LIN bus communication, IP32 protection, and 12 kg payload capaci
DFRobot ESP32-S3 AI Camera
ESP32-S3 AI camera module with 2MP wide-angle night vision sensor, I2S speaker and microphone, ambient light sensor, WiFi/BLE 5.0, and edge AI inference support in a 42x42mm package.
Waveshare CM5-DUAL-ETH-BASE
Raspberry Pi HatGigabit + 2.5G dual Ethernet base board for Raspberry Pi Compute Module 5 with M.2 NVMe slot, dual HDMI 4K output, dual MIPI interfaces, wide 7-36V input, EEPROM, and encryption chip for industrial Io
Waveshare RP2040-LoRa
A compact RP2040-based LoRa module with SX1262 transceiver, available in 410-525MHz (LF) and 850-930MHz (HF) variants, featuring 2MB flash, 20 GPIO pins, IPEX antenna connector, and castellated edge d
Waveshare ESP32-S3-LR1121
Dev BoardCompact castellated ESP32-S3 development board with Semtech LR1121 multi-band LoRa transceiver supporting Sub-GHz and 2.4GHz bands, WiFi, BLE 5.0, and Meshtastic compatibility in a 41x21mm form factor
LuckFox Pico Mini
Linux SbcTiny Linux SBC (28x21mm) based on Rockchip RV1103 with ARM Cortex-A7 @ 1.2GHz, RISC-V MCU, 0.5 TOPS NPU, 64MB DDR2, MIPI CSI camera, 17 GPIO pins, and castellated-hole design for direct soldering.
Waveshare ESP32-S3-CAM-OV5640
Dev BoardESP32-S3 AIoT camera board with 5MP OV5640 autofocus camera, dual-microphone array with noise cancellation, ES8311 audio codec, NS4150B speaker amplifier, battery charging, and display/camera expansio
LuckFox Pico Zero
Linux SbcFeature-rich Linux SBC based on Rockchip RV1106G3 with ARM Cortex-A7, 1.0 TOPS NPU, 256MB DDR3L, 8GB eMMC, WiFi 6, Bluetooth 5.2, 40-pin RPi-compatible GPIO, MIPI CSI 4-lane camera, and onboard microp
Waveshare ESP32-P4-WIFI6
Dev BoardPico-form-factor development board combining the ESP32-P4 RISC-V dual-core at 400MHz with an ESP32-C6 co-processor for WiFi 6 and Bluetooth 5 LE. Features 32MB PSRAM, 32MB flash, MIPI-DSI/CSI, onboard
LuckFox Pico Ultra
Linux SbcFull-featured Linux SBC based on Rockchip RV1106G3 with 1.0 TOPS NPU, 256MB DDR3L, 8GB eMMC, 100M Ethernet (RJ45), optional WiFi 6/BT 5.2, MIPI CSI camera, RGB LCD display output, speaker, and PoE hea
Waveshare ESP32-S3-AUDIO-Board
Dev BoardESP32-S3 AI smart speaker development board with dual-microphone array, ES8311 audio codec, 7 surround RGB LEDs, RTC, camera and LCD expansion interfaces, and LiPo battery support for voice assistant
LuckFox Pico Pro
Linux SbcLinux SBC based on Rockchip RV1106G2 with ARM Cortex-A7 @ 1.2GHz, 0.5 TOPS NPU, 128MB DDR3L, 256MB SPI NAND Flash, 100M Ethernet (RJ45), MIPI CSI camera, 26 GPIO pins, and RTC battery header in Pico f
Waveshare ESP32-P4-ETH
Dev BoardPico-form-factor development board with ESP32-P4 RISC-V dual-core at 400MHz, 100Mbps Ethernet via IP101 PHY, 32MB PSRAM, 32MB flash, MIPI-DSI/CSI interfaces, onboard ES8311 audio codec with amplifier,
LuckFox Pico Plus
Linux SbcLinux SBC based on Rockchip RV1103 with ARM Cortex-A7 @ 1.2GHz, RISC-V MCU, 0.5 TOPS NPU, 64MB DDR2, 128MB NAND Flash, 10/100M Ethernet (RJ45), MIPI CSI camera, and 25 GPIO pins in a Pico form factor.
Waveshare ESP32-S3-RS485-CAN
Dev BoardIndustrial ESP32-S3 control board with isolated RS-485 and CAN bus interfaces, 7-36V wide voltage input, PCF85063 RTC, DIN rail enclosure, and WiFi/Bluetooth for industrial IoT and automation applicat
LuckFox Lyra
Linux SbcCompact Linux SBC based on Rockchip RK3506G2 with triple-core ARM Cortex-A7 @ 1.2GHz + Cortex-M0 MCU, 128MB DDR3L, MIPI DSI display output (up to 1280x800), 24 Rockchip Matrix IO pins, and built-in au
Waveshare ESP32-P4-WIFI6-DEV-KIT
Dev BoardFull-featured ESP32-P4 development board with WiFi 6 and Bluetooth 5 LE via ESP32-C6, 100Mbps Ethernet, PoE header, 3.5mm headphone jack, USB OTG HS switchable host/device, 16MB flash, 32MB PSRAM, MIP
LuckFox Lyra Plus
Linux SbcCompact Linux SBC based on Rockchip RK3506G2 with triple-core ARM Cortex-A7 @ 1.2GHz + Cortex-M0, 128MB DDR3L, 256MB NAND Flash, 100M Ethernet, MIPI DSI display output, 24 Rockchip Matrix IO pins, and
LuckFox Lyra Ultra
Linux SbcFeature-rich Linux SBC based on Rockchip RK3506B with triple-core ARM Cortex-A7 @ 1.2GHz + Cortex-M0, 512MB DDR3L, 8GB eMMC, 100M Ethernet, optional WiFi 6/BT 5.2, MIPI DSI display, PoE header, and 33
LuckFox Lyra Zero W
Linux SbcCompact Linux SBC based on Rockchip RK3506B with triple-core ARM Cortex-A7 @ 1.2GHz + Cortex-M0, 512MB DDR3L, 256MB NAND Flash, WiFi 6, Bluetooth 5.2, MIPI DSI display, 28 Matrix IO pins, and 40-pin R
Waveshare ESP32-P4-WIFI6-POE-ETH
Dev BoardESP32-P4 development board with WiFi 6 and Bluetooth 5 LE via ESP32-C6, 100Mbps PoE Ethernet via IP101GRI, IPEX external antenna, USB Type-A OTG HS, 32MB PSRAM, 16MB flash, MIPI-DSI/CSI, onboard audio
Waveshare RP2040-BLE
A compact RP2040-based module with Bluetooth 5.1 dual-mode (BLE + Classic SPP) connectivity, 2MB flash, 14 GPIO pins, ceramic antenna, and castellated edge design for embedded Bluetooth applications.
Arduino Nano Matter
Dev BoardUltra-compact Matter/Thread/BLE development board based on Silicon Labs MGM240S, bringing official Matter support to the beloved Arduino Nano form factor at 45×18mm.
Olimex ESP32-C6-EVB
Dev BoardOpen-source hardware evaluation board with ESP32-C6, 4 mains-rated relays, 4 opto-isolated inputs, and WiFi 6/Thread/Zigbee/Matter connectivity for home and industrial automation.
SparkFun Thing Plus Matter - MGM240P
Dev BoardFeather-compatible Matter/Thread/Zigbee/BLE dev board based on Silicon Labs MGM240P with Qwiic, LiPo charging, microSD, and +20dBm radio range.
Olimex ESP32-C6-DevKit-Lipo
Dev BoardBreadboard-friendly open-source ESP32-C6 dev board with WiFi 6, Thread, Zigbee, BLE 5, built-in LiPo charger, and dual USB-C — all for under €9.
Olimex ESP32-H2-DevKit-LiPo
Dev BoardUltra-affordable open-source ESP32-H2 dev board for Thread, Zigbee, and Matter — BLE 5, LiPo charging, Qwiic/Stemma, dual USB-C, for €5.95.
DFRobot FireBeetle 2 ESP32-C6
Dev BoardLow-cost ESP32-C6 IoT board with WiFi 6, BLE 5, Thread, Zigbee, Matter, solar panel charging with MPPT, and ultra-low 16µA deep sleep — for $5.90.
DFRobot Beetle ESP32-C6
Dev BoardCoin-sized (25×20.5mm) ESP32-C6 wearable dev board with WiFi 6, BLE 5, Thread, Zigbee, Matter, integrated LiPo charger, and 14µA deep sleep — for $4.90.
Seeed Studio XIAO ESP32C6
Dev BoardThumb-sized (21×17.8mm) Matter/Thread/Zigbee/WiFi 6/BLE 5.3 dev board with dual RISC-V cores, onboard antenna, 15µA deep sleep, and hardware security — for ~$5.
Heltec Wireless Shell V3
moduleUltra-compact ESP32-S3 + SX1262 LoRa module with stamp-hole design for direct PCB integration, supporting WiFi, BLE 5, and LoRa at 470-928MHz with deep sleep current under 10uA.
Adafruit Feather M0 WiFi (ATSAMD21 + ATWINC1500)
Dev BoardARM Cortex-M0+ Feather board with ATWINC1500 802.11 b/g/n WiFi, 256KB flash, 32KB RAM, 10 analog inputs, and built-in LiPo charger. FCC-certified WiFi for IoT and connected projects.
ESP32-C6-WROOM-1-N8 Module
moduleEspressif ESP32-C6 WROOM module with 8MB flash and PCB antenna, supporting Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread — for soldering onto custom IoT hardware.
Pycom GPy
Dev BoardESP32-based triple-network MicroPython board with WiFi 802.11 b/g/n, Bluetooth LE, and LTE CAT-M1/NB1 cellular. 4MB RAM, 8MB flash, 22 GPIO, breadboard-compatible. Ideal for global LTE IoT deployments
Adafruit Feather M0 Bluefruit LE
Dev BoardARM Cortex-M0+ dev board with Bluetooth LE (nRF51822) in the compact Feather form factor. Features 256KB flash, 32KB RAM, native USB, and a built-in LiPo charger for wireless wearable and IoT projects
Circuit Playground Classic
Dev BoardAll-in-one ATmega32u4 learning board with 10 NeoPixels, LIS3DH accelerometer, microphone, speaker, light and temperature sensors, and 8 capacitive touch pads in a circular 2-inch form factor.
Adafruit METRO 328
Dev BoardArduino UNO-compatible development board built around the ATmega328P at 16 MHz with 32KB flash, micro USB, and Adafruit's signature black PCB with gold-plated pads.
Adafruit PyGamer
Handheld GamingHandheld gaming console and dev board powered by ATSAMD51J19 (120MHz Cortex-M4F) with a 1.8" TFT display, 5 NeoPixels, accelerometer, and Feather-compatible headers. Runs MakeCode Arcade, CircuitPytho
Arduino Mega 2560 R3
Dev BoardHigh-pin-count Arduino board based on the ATmega2560 at 16 MHz with 256KB flash, 54 digital I/O pins, 16 analog inputs, and 4 hardware UARTs for complex projects.
ESP32-C6-WROOM-1-N4 Module
moduleEspressif ESP32-C6 WROOM module with 4MB flash and PCB antenna, supporting Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread — for soldering onto custom IoT hardware.
Adafruit GEMMA M0
Dev BoardCoin-sized wearable microcontroller board with ATSAMD21E18 Cortex M0+ at 48MHz, 3 I/O sew pads, built-in RGB DotStar LED, and CircuitPython pre-installed. Designed for e-textiles and wearable projects
Adafruit Metro M7 with microSD
Dev BoardHigh-performance Arduino-compatible board powered by the NXP iMX RT1011 Cortex-M7 at 500 MHz, with 8MB QSPI flash, microSD slot, STEMMA QT, and USB-C.
Seeeduino Cloud
Dev BoardArduino Yun-compatible board combining ATmega32u4 with a Dragino HE Linux WiFi module running OpenWRT. Features 802.11 b/g/n WiFi, Ethernet, 14 digital I/O pins, and USB host for IoT gateway applicati
Adafruit QT Py RP2040
Dev BoardTiny RP2040-based dev board in the QT Py / Seeed XIAO form factor, featuring 8MB flash, USB-C, a NeoPixel, and a STEMMA QT connector for solderless I2C sensor wiring.
Adafruit METRO M0 Express
Dev BoardArduino Uno-compatible development board powered by ATSAMD21G18 Cortex M0+ at 48MHz with 256KB flash, 32KB SRAM, 2MB SPI flash, and CircuitPython pre-loaded. Features Arduino shield compatibility and
Arduino Uno Ethernet
Dev BoardArduino UNO with built-in Ethernet and microSD slot based on the ATmega328P at 16 MHz — a self-contained board for networked Arduino projects without needing a separate Ethernet shield.
FeatherS2 Neo ESP32-S2
featherESP32-S2 Feather-format board by Unexpected Maker with 4MB flash, 2MB PSRAM, 5×5 RGB LED matrix, LiPo charging, and STEMMA QT — designed for colorful wearable and IoT projects.
Raspberry Pi 4 Model B
sbcFlagship Raspberry Pi SBC with BCM2711 quad-core Cortex-A72 @ 1.5GHz, dual-band WiFi, Gigabit Ethernet, dual micro-HDMI 4K outputs, USB 3.0, and USB-C power. Available in 1GB, 2GB, 4GB, and 8GB LPDDR4
Adafruit Feather M0 WiFi with uFL
Dev BoardVariant of the Feather M0 WiFi (ATSAMD21 + ATWINC1500) with a u.FL antenna connector instead of a PCB trace antenna, allowing use of an external antenna for improved WiFi range.
Adafruit FLORA v3
Dev BoardRound, sewable Arduino-compatible wearable platform with ATmega32u4, native USB, NeoPixel, JST battery connector, and alligator-clip-friendly pads in a 45mm diameter form factor.
Adafruit Metro M7 with AirLift
Dev BoardArduino UNO-compatible Metro board powered by NXP iMX RT1011 at 500 MHz with an ESP32 AirLift WiFi co-processor, 8 MB QSPI Flash, and USB-C — Adafruit's fastest Metro ever.
Adafruit Feather RP2040 SCORPIO
featherRP2040 Feather board with 8 consecutive 5V-level-shifted PIO outputs dedicated to NeoPixel LED strip control, 8MB flash, USB-C, and LiPo charging.
Adafruit HalloWing M4 Express
Microcontroller BoardSkull-shaped ATSAMD51J19 dev board (120MHz Cortex-M4F) with a 1.54" 240×240 IPS TFT, 4 capacitive touch inputs, 4 NeoPixels, accelerometer, speaker driver, and LiPoly charging. Perfect for Halloween p
Adafruit Feather M0 RFM69HCW 868/915 MHz
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with RFM69HCW sub-GHz radio at 868/915 MHz. Up to +20 dBm TX power, AES-128 encryption, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.
Arduino Leonardo
Dev BoardArduino board with ATmega32u4 featuring native USB — no separate USB chip needed — allowing it to emulate keyboards, mice, and joysticks while maintaining full Arduino IDE compatibility.
Adafruit FunHouse
IoT ControllerWiFi IoT automation board with ESP32-S2, built-in 1.54″ color TFT, barometric pressure, humidity, temperature sensors, DotStar LEDs, capacitive touch, and a speaker.
Adafruit Feather 32u4 RFM69HCW 868/915 MHz
Dev BoardATmega32u4 Feather board with RFM69HCW sub-GHz radio supporting 868/915 MHz with up to +20 dBm transmit power, AES-128 encryption, and 100mA LiPo charger for long-range IoT sensor networks.
Arduino Due
Dev BoardArduino's first 32-bit ARM board based on the AT91SAM3X8E Cortex-M3 at 84 MHz with 512KB flash, 96KB SRAM, dual USB ports, 2 DACs, and 12 PWM channels in Mega form factor.
BBC micro:bit v1
Dev BoardPocket-sized educational microcontroller with nRF51822, 5×5 LED matrix, accelerometer, magnetometer, Bluetooth LE, 2 buttons, and 19 I/O pins. Designed for teaching coding to children and beginners vi
Adafruit Feather 32u4 RFM69HCW 433 MHz
Dev BoardATmega32u4 Feather board with RFM69HCW sub-GHz radio at 433 MHz with up to +20 dBm transmit power, AES-128 encryption, and built-in LiPo charger for long-range sensor networks in the 433 MHz ISM band.
Raspberry Pi Pico 2W
rp2350The Raspberry Pi Pico 2W is a wireless microcontroller board built on the RP2350 chip, delivering dual Cortex-M33 or RISC-V cores at 150MHz with 2.4GHz WiFi 4 (WPA3), Bluetooth 5.2, and 4MB flash — a
ESP32-C6-DevKitC-1-N8
Dev BoardEspressif reference development board for the ESP32-C6 with 8MB flash, Wi-Fi 6, Bluetooth 5 LE, Zigbee 3.0, Thread, RGB LED, dual USB-C ports, and full GPIO breakout.
Circuit Playground Bluefruit
Educational BoardRound educational microcontroller with Nordic nRF52840 (64MHz Cortex-M4F + BLE), 10 NeoPixels, accelerometer, microphone, light sensor, speaker, 8 alligator-clip I/O pads, and USB. Runs CircuitPython,
Adafruit ESP32-S2 Feather
Dev BoardFeather-format ESP32-S2 board with 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, LiPoly charging, and MAX17048 battery monitor — WiFi IoT in the Feather ecosystem.
Arduino Micro
Dev BoardSmallest official Arduino with native USB, based on ATmega32u4 at 16 MHz. Breadboard-friendly at 48×18mm with 20 I/O pins, 12 analog inputs, and USB HID/CDC emulation capability.
Raspberry Pi 500
Keyboard ComputerThe Raspberry Pi 500 is an all-in-one desktop computer built into a compact keyboard, packing a quad-core Cortex-A76 at 2.4GHz, 8GB LPDDR4X RAM, 32GB microSD, dual-band WiFi 5, Bluetooth 5.0, and a 40
Adafruit Feather RP2040 with DVI Output
featherRP2040 Feather board with a DVI/HDMI-compatible output port for driving displays at up to 800×480, plus LiPo charging, USB-C, NeoPixel, and STEMMA QT.
TinyS2 ESP32-S2
Dev BoardUltra-compact ESP32-S2 development board by Unexpected Maker in the TinyPICO form factor, with 4 MB flash, 2 MB PSRAM, native USB, WiFi, and LiPo charging at just 17.8 × 41 mm.
Pycom SiPy
Dev BoardESP32-based MicroPython development board with WiFi, Bluetooth LE, and +22dBm SigFox radio (RCZ2/RCZ4). Breadboard-compatible with ultra-low power modes, ideal for long-range sub-GHz IoT deployments.
Adafruit Feather 32u4 RFM95 LoRa 868/915 MHz
Dev BoardATmega32u4 Feather board with RFM95W SX1276 LoRa radio for 868/915 MHz long-range communication. Achieves 2+ km range, supports spreading factors SF6-SF12, and includes a built-in LiPo charger.
Adafruit Feather STM32F405 Express
Microcontroller BoardHigh-speed Feather-form-factor dev board with STM32F405 ARM Cortex-M4F @ 168MHz, 1MB Flash, 192KB RAM, 2MB SPI Flash, USB-C, STEMMA QT, SD card socket, and LiPo charging. Adafruit's fastest CircuitPyt
Adafruit Metro RP2350 with PSRAM
rp2350The Adafruit Metro RP2350 with PSRAM is an Arduino Uno–footprint development board powered by the RP2350 chip, featuring 16MB flash, 520KB SRAM, and 8MB QSPI PSRAM for expanded dynamic memory — ideal
Netduino Plus
Dev BoardThe Netduino Plus is an open-source .NET Micro Framework microcontroller board with built-in Ethernet, Arduino-compatible pinout, and microSD slot — enabling C# development for connected embedded proj
Adafruit Feather nRF52 Pro
Dev BoardBluetooth 5.0 LE Feather board with nRF52832 ARM Cortex M4F at 64MHz, 512KB flash, 64KB SRAM, Apache Mynewt bootloader, SWD debug port, and built-in LiPo charging. For advanced BLE 5.0 open-source app
Arduino Yún
Dev BoardHybrid Arduino/Linux board combining ATmega32U4 with a MIPS-based Linux SoC, 802.11bgn WiFi, Ethernet, USB host, and microSD — enabling cloud-connected Arduino sketches and over-the-air programming.
Adafruit Feather RP2040 RFM69 868/915 MHz
featherRP2040 Feather with integrated RFM69HCW 868/915 MHz packet radio transceiver, 8MB flash, LiPo charging, STEMMA QT, and uFL antenna connector for long-range wireless mesh networks.
Netduino 3
Dev BoardThe Netduino 3 is an open-source .NET Micro Framework development board powered by the STM32F427VG ARM Cortex-M4 at 168MHz, featuring Arduino shield compatibility, 3 GOBUS ports, and 6 analog input ch
Adafruit Feather 32u4 RFM96 LoRa 433 MHz
Dev BoardATmega32u4 Feather board with RFM96W SX1278 LoRa radio for 433 MHz long-range communication. Achieves 2+ km range with quarter-wave antennas, supports LoRaWAN, and includes a built-in LiPo charger.
PIC32 Pinguino
Dev BoardThe PIC32 Pinguino is an open-source Arduino-form-factor development board based on the Microchip PIC32MX440F256H 32-bit processor at 80MHz, with industrial-grade power input, LiPo battery support, an
Adafruit Feather RP2040 with RFM95 LoRa 915 MHz
featherRP2040 Feather with integrated RFM95W LoRa radio at 915 MHz (SX1276), 8MB flash, up to 20 km range, LiPo charging, STEMMA QT, and uFL antenna connector.
ESP32-S2 HMI DevKit 1
Dev BoardEspressif ESP32-S2-WROVER HMI development kit with a 4.3″ 800×480 capacitive touchscreen, onboard IMU, microphone, speaker, microSD, IR, and RGB LEDs — designed for smart-home panel prototyping.
Adafruit ESP32-S2 Feather with w.FL Antenna
ESP32 S2The Adafruit ESP32-S2 Feather with w.FL is a Feather-form WiFi microcontroller board with a w.FL (MHF4) external antenna connector for extended range. It features a 240MHz ESP32-S2 single-core CPU, 4M
Adafruit PyPortal Titano
Iot DisplayLarge-screen IoT display board with ATSAMD51J20 + ESP32 WiFi coprocessor, 3.5" 320×480 resistive touchscreen TFT, 8MB Flash, microSD, speaker, and USB-C. Designed for Python-powered internet-connected
Arduino MKR1000
Dev BoardCompact Arduino board with SAMD21 ARM Cortex-M0+ and ATSAMW25 integrated WiFi (802.11 b/g/n) with cryptochip and SSL support. Built-in LiPo charger, 8 digital I/O, and 7 analog inputs in a slim 65mm f
ESP32-S3 Box
Dev BoardEspressif AIoT development kit with ESP32-S3, a 2.4″ 320×240 capacitive touchscreen, dual microphones, speaker, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, and Pmod expansion.
Pycom FiPy
Dev BoardFive-network ESP32 MicroPython board with WiFi, Bluetooth LE, LoRa, SigFox, and dual LTE-M (CAT-M1/NB1). 4MB RAM, 8MB flash, 22 GPIO. The most connected Pycom module for versatile LPWAN IoT applicatio
ESP32-H2-DevKitM-1-N4S
Dev BoardEspressif development board for the ESP32-H2 with Bluetooth 5 LE, Zigbee 3.0, Thread, and Matter support, 4MB flash, USB-C, RGB LED, and full GPIO breakout — no Wi-Fi.
Raspberry Pi Pico 2
rp2350The Raspberry Pi Pico 2 is an RP2350-based microcontroller board with dual ARM Cortex-M33 or RISC-V Hazard3 cores at 150MHz, 520KB SRAM, and 4MB flash. It doubles the RAM and flash of the original Pic
Adafruit ItsyBitsy nRF52840 Express
Microcontroller BoardTiny breadboard-friendly Bluetooth LE board with Nordic nRF52840 Cortex-M4F @ 64MHz, 1MB Flash, 256KB RAM, 2MB QSPI Flash, 21 GPIO, and native USB — all in a 36×17.6mm footprint. Supports CircuitPytho
ESP32-H2-MINI-1 Module
moduleEspressif ESP32-H2 MINI module with 4MB flash and PCB antenna, supporting Bluetooth 5 LE, Zigbee 3.0, Thread, and Matter — a compact bare module for custom PCB designs without Wi-Fi.
Raspberry Pi 500+
Keyboard ComputerThe Raspberry Pi 500+ is a premium all-in-one keyboard computer with the Raspberry Pi 5 processor, 16GB LPDDR4X RAM, 256GB internal NVMe SSD, mechanical Gateron KS-33 switches with RGB, dual-band WiFi
Raspberry Pi Zero 2 W
sbcCredit-card-tiny Linux SBC with a quad-core Cortex-A53 at 1 GHz, 512 MB RAM, 2.4 GHz WiFi, Bluetooth 4.2, a 40-pin GPIO header footprint, mini HDMI, and a CSI camera connector.
Netduino Plus 2
Dev BoardThe Netduino Plus 2 is an Arduino R3-compatible .NET Micro Framework development board with a 168MHz ARM Cortex-M4 processor, built-in Ethernet, microSD slot, and 12-bit ADC — offering C# programming
Adafruit ItsyBitsy 32u4 3V 8MHz
Dev BoardUltra-compact 3.3V Arduino-compatible board with ATmega32u4 at 8MHz, native USB HID, 23 GPIO pins, 2KB RAM, 28KB flash, and Micro USB. Measures 35mm × 17mm — smaller than a Feather with equivalent AVR
Adafruit Feather RP2040 with USB Type A Host
featherRP2040 Feather with a dedicated USB Type-A host port powered by a 5V boost converter, enabling connection to USB devices like keyboards, mice, and MIDI controllers alongside standard USB-C programming
Adafruit Feather nRF52840 Sense
Microcontroller BoardSensor-rich BLE Feather with Nordic nRF52840 (64MHz Cortex-M4F), 6 onboard sensors (9-DoF IMU, magnetometer, proximity/light, PDM mic, humidity, barometric pressure), 21 GPIO, and FCC/IC/TELEC certifi
![ProS3[D] ESP32-S3 by Unexpected Maker](/_next/image?url=https%3A%2F%2Fmedia.openhardware.directory%2Fopenhardware-directory%2Fentities%2Fpros3d-esp32-s3%2F4d1e06b24b41.jpg&w=640&q=75)
ProS3[D] ESP32-S3 by Unexpected Maker
ESP32 S3The ProS3[D] is Unexpected Maker's flagship ESP32-S3 development board featuring a dual antenna system (onboard 3D high-gain + u.FL for external), an I2C battery fuel gauge, 16MB flash, 8MB PSRAM, dua
Adafruit ItsyBitsy 32u4 5V 16MHz
Dev BoardUltra-compact 5V Arduino-compatible board with ATmega32u4 at 16MHz, native USB HID, 23 GPIO pins, 2KB RAM, 28KB flash, and Micro USB. Measures 35mm × 18mm — small form factor with full Arduino Leonard
Adafruit Pro Trinket 5V
Dev BoardCompact ATmega328P-based Arduino-compatible board at 16 MHz, 5V, with 28KB flash, 18 GPIO, Micro USB, FTDI header, and mounting holes — a miniaturized UNO with battery-friendly power management.
Netduino 3 WiFi
Dev BoardThe Netduino 3 WiFi is a .NET Micro Framework development board with an STM32F427 ARM Cortex-M4 at 168MHz, integrated WiFi with WPA2/SSL support, Arduino shield compatibility, and 3 GOBUS expansion po
Adafruit ESP32-S2 Feather with BME280
Dev BoardESP32-S2 Feather with an onboard BME280 temperature, humidity, and barometric pressure sensor, plus 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, and LiPoly charging.
![FeatherS3[D] ESP32-S3 by Unexpected Maker](/_next/image?url=https%3A%2F%2Fmedia.openhardware.directory%2Fopenhardware-directory%2Fentities%2Ffeathers3d-esp32-s3%2Fcf0cd1b5bb51.jpg&w=640&q=75)
FeatherS3[D] ESP32-S3 by Unexpected Maker
ESP32 S3The FeatherS3[D] is Unexpected Maker's Feather-form ESP32-S3 board with a dual antenna system (onboard + u.FL, software-switchable), I2C battery fuel gauge, 16MB flash, 8MB PSRAM, two STEMMA QT connec
Adafruit My Little Hacker ESP32-S2
Dev BoardChild-oriented ESP32-S2 dev board with 4MB flash, 2MB PSRAM, 5 NeoPixels, microSD, I2S audio amplifier for speakers, USB-C, STEMMA QT, and AA battery or USB-C power support.
Pycom LoPy4
Dev BoardESP32-based quad-network MicroPython board with WiFi, Bluetooth LE, LoRa (SX1276 868/915/433MHz), and SigFox. 4MB PSRAM, 8MB flash, 24 GPIO. Can function as a nano LoRa gateway. FCC/CE certified.
Adafruit Feather M0 RFM69HCW 433 MHz
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with RFM69HCW sub-GHz radio at 433 MHz. Up to +20 dBm TX power, AES-128 encryption, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.
PJRC Teensy 4.1
Microcontroller BoardHigh-performance microcontroller with NXP i.MX RT1062 ARM Cortex-M7 @ 600MHz, 1MB RAM, 2MB Flash, 100Mbps Ethernet PHY, SD card, 55 GPIO, dual 480Mbps USB, and 3 CAN Bus. Expanded Teensy 4.0 sibling.
TinyS3 ESP32-S3 with u.FL
Dev BoardUltra-compact ESP32-S3 board by Unexpected Maker in TinyPICO form factor with u.FL external antenna connector, 8MB flash, 8MB PSRAM, LiPo charging, and dual-core 240 MHz.
![TinyS3[D] ESP32-S3 by Unexpected Maker](/_next/image?url=https%3A%2F%2Fmedia.openhardware.directory%2Fopenhardware-directory%2Fentities%2Ftinys3d-esp32-s3%2Fb37122ee4b5d.jpg&w=640&q=75)
TinyS3[D] ESP32-S3 by Unexpected Maker
ESP32 S3The TinyS3[D] is Unexpected Maker's ultra-compact ESP32-S3 board in the TinyPICO form factor, featuring a dual antenna system (onboard + u.FL, software-switchable), I2C battery fuel gauge, 8MB flash,
Netduino 3 Ethernet
Dev BoardThe Netduino 3 Ethernet is a .NET Micro Framework board with an STM32F427VI ARM Cortex-M4 at 168MHz, wired Ethernet with full TCP/IP stack, microSD storage, Arduino shield compatibility, and 3 GOBUS p
FeatherS3 ESP32-S3 with u.FL
featherUnexpected Maker's pro ESP32-S3 Feather board with u.FL external antenna connector, 16MB flash, 8MB PSRAM, dual STEMMA QT connectors, LiPo charging, and dual 700mA regulators.
ESP32-S3-DevKitC-1
Dev BoardEspressif official ESP32-S3 development board with ESP32-S3-WROOM-1 module, dual-core 240 MHz LX7, up to 45 GPIO, dual USB ports, and available in three memory variants: 8MB/2MB PSRAM, 8MB/8MB PSRAM,
Adafruit Metro Mini 328 V2
Dev BoardBreadboard-friendly ATmega328P Arduino-compatible board at 16 MHz, 5V, with USB-C, STEMMA QT I2C port, 32KB flash, and CP2102N USB-serial chip — a compact modern drop-in for the Arduino UNO.
Adafruit HUZZAH ESP8266 Breakout
Dev BoardBreadboard-friendly ESP8266 WiFi breakout at 80 MHz with 802.11 b/g/n, 9 GPIO, 3.3V logic, 500mA regulator, and pre-loaded NodeMCU firmware — Adafruit's accessible entry point to ESP8266 development.
Raspberry Pi Zero WH
Dev BoardRaspberry Pi Zero W with pre-soldered 40-pin GPIO headers. BCM2835 single-core 1GHz ARM11, 512MB RAM, built-in 802.11 b/g/n WiFi (BCM43143), Bluetooth LE, Mini HDMI, Micro USB, and MicroSD. No solderi
ESP32-S2-WROVER Module
moduleBare WiFi module with Espressif ESP32-S2 single-core Xtensa LX7 @ 240MHz, 4MB Flash, 2MB PSRAM, 802.11b/g/n, native USB 1.1 OTG, and SMD pads. Intended for integration onto custom PCBs, not a standalo
Adafruit Feather M0 RFM95 LoRa 900 MHz
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with RFM95W SX1276 LoRa radio for 868/915 MHz. Achieves 2+ km range, supports LoRaWAN, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.
ProS3 ESP32-S3 with u.FL
Dev BoardUnexpected Maker's ProS3 ESP32-S3 with u.FL external antenna, 16MB flash, 8MB PSRAM, 27 GPIO castellated headers, dual LDO regulators, LiPo charging, and STEMMA QT.
ESP32-S3-DevKitM-1
Dev BoardEspressif official ESP32-S3 development board using the compact ESP32-S3-MINI-1 module, with dual-core 240 MHz LX7, 8 MB flash, up to 45 GPIO, dual USB ports, and smaller footprint than the WROOM-1.
Adafruit ItsyBitsy M0 Express
Dev BoardCompact 3.3V CircuitPython/Arduino board with ATSAMD21G18 Cortex M0+ at 48MHz, 32KB RAM, 256KB flash, 2MB SPI flash, 23 GPIO with 11 analog inputs, RGB DotStar LED, native USB. Measures 36mm × 18mm.
Adafruit Metro RP2040
Dev BoardArduino-Uno-compatible development board powered by the RP2040 with 16MB QSPI flash, microSD slot, STEMMA QT, onboard NeoPixel, USB-C, and an RX/TX switch for serial flexibility.
Adafruit Feather M0 RFM96 LoRa 433 MHz
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with RFM96W SX1278 LoRa radio for 433 MHz. Achieves 2+ km range, supports LoRaWAN, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.
ESP32-S2-WROVER-I Module with uFL
moduleBare WiFi module with ESP32-S2 Xtensa LX7 @ 240MHz, 4MB Flash, 2MB PSRAM, 802.11b/g/n, native USB OTG, and a uFL connector for an external antenna. Drop-in variant of the WROVER for improved RF range.
Adafruit ESP32-S3 Feather (8MB Flash, No PSRAM)
Dev BoardFeather-format ESP32-S3 dual-core 240 MHz board with 8 MB flash, native USB-C, BLE, WiFi, STEMMA QT, LiPoly charging, and MAX17048 — no PSRAM variant for leaner memory budgets.
ESP32-C3-DevKit-RUST-2
Dev BoardEspressif RISC-V dev board optimized for Rust programming, featuring ESP32-C3-MINI-1 with 4MB flash, Wi-Fi, BT5, onboard ICM-42670-P IMU, SHTC3 temperature/humidity sensor, and USB-C.
Adafruit QT Py ESP32-S2
Dev BoardTiny Seeed XIAO-compatible ESP32-S2 dev board with 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, WiFi, 13 GPIO, and 10 ADC inputs — no Bluetooth, all in a 21.8 × 17.9 mm footprint.
ESP32-S2 Saola 1R Dev Kit
Dev BoardEspressif official ESP32-S2-WROVER development board with dual 20-pin headers (breadboard-friendly), 8MB Flash, 2MB PSRAM, WiFi, dual Micro-USB (native USB + UART bridge), NeoPixel RGB LED, and boot/r
Adafruit Feather M4 Express
Dev BoardHigh-performance Feather with ATSAMD51J19 Cortex M4F at 120MHz, 192KB RAM, 512KB flash, 2MB SPI flash, dual 12-bit DAC/ADC, AES-256 hardware crypto, LiPo charging, 21 GPIO, and native USB HID. Feather
Adafruit Feather 32u4 Basic Proto
Dev BoardFeather-format ATmega32u4 board at 8 MHz, 3.3V with LiPo charging, native USB, onboard prototyping area, 20 GPIO, JST battery connector, and 100mA integrated charger — all in 51×23mm.
Arduino UNO Mini Limited Edition
Dev BoardMiniaturised collector's Arduino UNO with ATmega328P at 16 MHz in a 34.2 × 26.7 mm form factor with USB-C, individually numbered and signed by Arduino's founders.
ESP32-S2 Kaluga Dev Kit
Dev BoardEspressif's multimedia-focused ESP32-S2 evaluation platform bundling four extension boards: audio player, capacitive touch panel, 3.2" LCD display, and camera module. Designed to showcase ESP32-S2 hum
Heltec Vision Master T190
Dev BoardESP32-S3 development board with optional SX1262 LoRa module and 1.9-inch TFT color display. Supports Meshtastic, LoRaWAN, Arduino, MicroPython, and features integrated battery management with 18uA dee
ESP32-S3 Korvo 2 Audio Dev Board
Dev BoardEspressif audio and multimedia development board with ESP32-S3, dual-microphone array for far-field wake-word detection, camera support, LCD interface, microSD, and Wi-Fi + BLE.
ESP32-C3 DevKitM-01
Dev BoardEspressif official RISC-V ESP32-C3 dev board with ESP32-C3-MINI-1 module, 4 MB embedded SPI Flash, WiFi 4, BLE 5, Micro-USB, RGB LED, and a compact footprint for IoT prototyping.
Espressif ESP32-S3-BOX-3
Dev BoardOpen-source AIoT development kit with ESP32-S3, 2.4" touchscreen, dual microphones, speaker, Wi-Fi, BLE, Matter support, 16MB flash, 16MB PSRAM, and a high-density expansion connector.
Adafruit HalloWing M0 Express
Dev BoardSkull-shaped wearable microcontroller with ATSAMD21G18 at 48MHz, 1.44" 128x128 TFT display, 3-axis accelerometer, light sensor, 4 capacitive touch pads, 2W speaker driver, 8MB SPI flash, and LiPo char
Adafruit QT Py ESP32-S2 with uFL Antenna
Dev BoardQT Py-sized ESP32-S2 dev board with a uFL connector for an external 2.4 GHz antenna, 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, and 13 GPIO — for improved WiFi range.
Adafruit Feather M4 CAN Express
Microcontroller BoardCAN-bus-capable Feather with ATSAME51J19 ARM Cortex-M4F @ 120MHz, built-in CAN transceiver + 5V booster, USB-C, 21 GPIO, 2MB SPI Flash, dual DAC, and LiPo charging. Ideal for automotive and industrial
Espressif ESP32-S3-BOX-3B
Dev BoardESP32-S3-BOX-3 bundle kit including the AIoT dev board with 2.4" touchscreen, dual mics, speaker, plus the DOCK stand, RGB LED module, USB-C cable, and Dupont wires.
Heltec HT-M00 Dual Channel LoRa Gateway
Lora GatewayA compact, low-cost dual-channel LoRaWAN gateway based on ESP32 and dual SX1276 transceivers, designed for indoor LoRa coverage of 1500-2000 square meters with support for SF7-SF12 spreading factors a
Adafruit Feather 32u4 Adalogger
Dev BoardFeather-format ATmega32u4 data logger at 8 MHz, 3.3V with onboard microSD slot, LiPo charging, native USB, 20 GPIO, and 100mA charger — built for portable data logging applications.
Circuit Playground Express
Dev BoardAll-in-one ATSAMD21 learning board with 10 NeoPixels, LIS3DH accelerometer, MEMS microphone, speaker with class D amp, IR transmit/receive, 7 capacitive touch pads, and 2MB SPI flash for CircuitPython
Adafruit PyBadge LC
Dev BoardLow-cost credit card-sized gaming/badge board with ATSAMD51J19 at 120MHz, 1.8\" 160x128 TFT, 8 game buttons, 1 NeoPixel, light sensor, buzzer, 2MB SPI flash, and MicroSD. Supports MakeCode Arcade, Cir
FeatherS2 ESP32-S2
Dev BoardFull-featured ESP32-S2 Feather-compatible board by Unexpected Maker with 16MB Flash, 8MB QSPI PSRAM, WiFi, native USB-C, 21 GPIO, STEMMA QT, APA102 RGB LED, ambient light sensor, and dual 700mA LDOs.
Adafruit QT Py ESP32 Pico
Dev BoardQT Py-sized classic ESP32 board with ESP32-PICO-V3-02, 8 MB flash, 2 MB PSRAM, WiFi, dual-core, Bluetooth Classic + BLE, STEMMA QT, and 13 GPIO — without native USB.
Adafruit PyPortal
Dev BoardThe Adafruit PyPortal is an all-in-one CircuitPython WiFi IoT display board featuring an ATSAMD51J20 Cortex-M4F, ESP32 WiFi coprocessor, 3.2" 320×240 color touchscreen, built-in speaker, NeoPixel, mic
Adafruit ESP32-S3 Feather 8MB w.FL Antenna
featherESP32-S3 Feather board with 8MB flash, w.FL external antenna connector (MHF3/IPEX3), native USB-C, MAX17048 battery monitor, LiPo charging, NeoPixel, and STEMMA QT.
Adafruit Metro ESP32-S2
Dev BoardArduino Uno-compatible WiFi dev board with ESP32-S2 single-core @ 240MHz, 4MB Flash, 2MB PSRAM, native USB-C, STEMMA QT, LiPoly charging, MAX17048 fuel gauge, barrel jack, and UNO shield compatibility
TinyS3 ESP32-S3
Dev BoardUltra-compact ESP32-S3 dev board by Unexpected Maker in the TinyPICO form factor — dual-core 240 MHz LX7, 8 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 17 GPIO, LiPo charging at 35 × 17.8 mm.
Adafruit ItsyBitsy ESP32 PCB Antenna
Dev BoardCompact ItsyBitsy-format ESP32 board with 8MB flash, 2MB PSRAM, PCB antenna, Wi-Fi + Bluetooth Classic + BLE, 20 GPIO, NeoPixel, STEMMA QT, and Micro-B USB.
Pycom WiPy 3.0
moduleESP32-based MicroPython IoT module with 802.11b/g/n WiFi, Bluetooth LE and Classic, 8MB flash, 4MB RAM, and ultra-low power ULP co-processor for deep-sleep GPIO monitoring at 25 µA.
FeatherS3 ESP32-S3
Dev BoardPro ESP32-S3 Feather-form-factor board by Unexpected Maker — dual-core 240 MHz LX7, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 21 GPIO, 2× STEMMA connectors, dual LDOs, LiPo charging.
Adafruit Feather HUZZAH ESP8266
Dev BoardAll-in-one ESP8266 WiFi Feather board at 80 MHz with 802.11 b/g/n, USB-serial (CP2104), LiPo charging, 9 GPIO, and 4MB flash — the easiest way to add WiFi to a portable battery-powered project.
Raspberry Pi Compute Module 3+
Compute ModuleThe Raspberry Pi Compute Module 3+ is a SODIMM-form-factor system-on-module with the BCM2837B0 quad-core Cortex-A53 at 1.2GHz, 1GB LPDDR2 RAM, and eMMC storage variants of 8GB, 16GB, 32GB, or the stor
Adafruit ItsyBitsy ESP32 wFL Antenna
Dev BoardCompact ItsyBitsy-format ESP32 board with 8MB flash, 2MB PSRAM, w.FL external antenna connector, Wi-Fi + Bluetooth Classic + BLE, 20 GPIO, NeoPixel, STEMMA QT, and Micro-B USB.
Pycom LoPy 1.0
moduleESP32-based MicroPython module combining 802.11b/g/n WiFi, Bluetooth, and LoRa/LoRaWAN (868/915 MHz) in one board. Can act as a nano LoRa gateway and is 100% Python programmable for multi-protocol IoT
BBC micro:bit v2
Educational BoardUpgraded BBC micro:bit with Nordic nRF52833 Cortex-M4F, Bluetooth 5.1, 5×5 LED matrix, 2 buttons, capacitive touch logo, built-in speaker and MEMS microphone, edge connector, and low-power mode. Same
ProS3 ESP32-S3
Dev BoardUnexpected Maker's ultimate ESP32-S3 dev board — dual-core 240 MHz LX7, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 27 GPIO, 2× LDOs, castellated headers, STEMMA, LiPo charging, JTAG.
Adafruit Feather 32u4 Bluefruit LE
Dev BoardFeather-format ATmega32u4 board with integrated nRF51822 Bluetooth LE, LiPo charging, native USB, 20 GPIO, and over-the-air firmware updates — an all-in-one BLE development board for iOS and Android c
Adafruit Monster M4SK
Dev BoardThe Adafruit Monster M4SK is a wearable dual-display Halloween mask board powered by ATSAMD51 Cortex-M4F at 120MHz with 8MB flash, two 240×240 IPS TFT eye displays, stereo audio, microphone, STEMMA co
Adafruit Metro RP2350
Dev BoardArduino-Uno-compatible board with RP2350, dual ARM Cortex-M33 at 150 MHz, 520KB SRAM, 16MB QSPI flash, microSD, HSTX port, 23 GPIO on headers, NeoPixel, STEMMA QT, and USB-C.
Adafruit Metro M4 Express AirLift
Dev BoardArduino Uno-compatible board with ATSAMD51J19 Cortex M4F at 120MHz, ESP32 AirLift WiFi co-processor with TLS/SSL, 512KB flash, 192KB RAM, 2MB QSPI flash, 25 GPIO, dual DAC/ADC, and native USB. Arduino
Adafruit QT Py ESP32-C3
Dev BoardTiny RISC-V ESP32-C3 dev board in the QT Py / Seeed XIAO footprint with 4 MB flash, WiFi, BLE 5 with Mesh, STEMMA QT, 13 GPIO, 5 ADC inputs, and USB-C — no native USB.
Arduino Zero
Dev Board32-bit ARM Cortex-M0+ Arduino in UNO form factor with ATSAMD21G18 at 48 MHz, 256KB flash, 32KB SRAM, onboard EDBG debugger, dual USB ports, 12-bit ADC/DAC — designed for IoT, wearables, and robotics.
Raspberry Pi Compute Module 4
Compute ModuleIndustrial-grade embedded computer module with BCM2711 quad-core Cortex-A72 @ 1.5GHz, 1–8GB LPDDR4 RAM, optional 8–32GB eMMC and optional dual-band WiFi + Bluetooth 5.0. Available in 32 hardware varia
Adafruit QT Py ESP32-S3
Dev BoardTiny dual-core ESP32-S3 dev board in the QT Py / Seeed XIAO footprint — 8 MB flash, WiFi, BLE 5, native USB-C, STEMMA QT, 13 GPIO, 10 ADC inputs, no PSRAM variant.
Adafruit Feather nRF52840 Express
Dev BoardFeather board with nRF52840 ARM Cortex-M4F at 64MHz, BLE 5.0, native USB (CDC/HID/MIDI/MSC), 1MB flash, 256KB SRAM, 2MB QSPI flash, 21 GPIO, SWD debug, and LiPo charging. Supports Arduino and CircuitP
Adafruit Matrix Portal M4
Dev BoardThe Adafruit Matrix Portal M4 is a plug-in controller for HUB75 RGB LED matrix panels, featuring an ATSAMD51J19 Cortex-M4F at 120MHz, ESP32 WiFi coprocessor with TLS/SSL, LIS3DH accelerometer, USB-C p
Raspberry Pi CM4 IO Board
Dev BoardOfficial reference carrier board for the Raspberry Pi Compute Module 4. Exposes dual HDMI 2.0, Gigabit Ethernet, 2× USB 2.0, PCIe x1, dual camera/display FPC, microSD slot (for CM4 Lite), RTC, HAT hea
Raspberry Pi Zero v1.3
Dev BoardUltra-compact $10 single-board Linux computer with BCM2835 ARM at 1 GHz, 512MB RAM, micro SD, mini HDMI, two micro USB ports, and camera connector — the original Raspberry Pi Zero with camera support
Adafruit ESP32-S3 Feather (4MB Flash, 2MB PSRAM)
Dev BoardFeather-format ESP32-S3 board with 4 MB flash and 2 MB PSRAM, dual-core 240 MHz, native USB-C, BLE 5, WiFi, STEMMA QT, LiPoly charging, and MAX17048 battery monitor.
Adafruit Grand Central M4 Express
Dev BoardArduino Mega-form-factor board with ATSAMD51P20 Cortex M4F at 120MHz, 1MB flash, 256KB RAM, 8MB QSPI flash, 70 GPIO pins, SD card slot, 8 SERCOM, 22 PWM outputs, dual DAC/ADC, AES-256, and native USB.
Adafruit Metro ESP32-S3
Dev BoardArduino UNO-compatible Metro board with ESP32-S3 dual-core 240 MHz, 16 MB flash, 8 MB Octal PSRAM, WiFi, BLE 5, native USB-C, STEMMA QT, LiPoly charging, and JTAG debug header.
Adafruit Metro M4 Express (ATSAMD51)
Dev BoardArduino-compatible development board with ATSAMD51 ARM Cortex-M4F at 120 MHz, 512KB flash, 192KB RAM, 2MB QSPI flash, dual 1 MSPS DACs, crypto engine, NeoPixel, and native USB. CircuitPython and Ardui
Adafruit HUZZAH32 ESP32 Breakout
Dev BoardMinimal ESP32 breakout board with dual-core Xtensa LX6 at 240MHz, 520KB SRAM, 4MB flash, WiFi 802.11 b/g/n, Bluetooth Classic + BLE, 12 ADC, 2 DAC. No USB converter or battery charger — requires exter
Adafruit MagTag
Dev BoardThe Adafruit MagTag is an ESP32-S2 WiFi e-paper IoT display board featuring a 2.9" 296×128 grayscale e-ink screen, 4 NeoPixels, LIS3DH accelerometer, 4 user buttons, STEMMA QT, USB-C, LiPo charging, a
ESP32-S3 Box Lite
Dev BoardEspressif AIoT dev kit — ESP32-S3, 2.4″ 320×240 display, dual MEMS microphones, speaker, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, Pmod expansion — the dock-free Lite sibling of the ESP32-S3 Box.
Adafruit PyBadge
Dev BoardCredit card-sized gaming and badge board with ATSAMD51J19 at 120MHz, 1.8\" 160x128 TFT, 8 game buttons, 5 NeoPixels, LIS3DH accelerometer, light sensor, 2W speaker, 2MB SPI flash, Feather headers, STE
Arduino MKR WiFi 1010
Microcontroller BoardCompact IoT Arduino with SAMD21 Cortex-M0+ @ 48MHz, u-blox NINA-W102 WiFi + Bluetooth module, ATECC508 crypto chip, 256KB Flash, 32KB SRAM, USB full-speed, LiPo charging, and MKR shield compatibility.
ESP32-S2 WROOM Module
ESP32 S2The ESP32-S2 WROOM is an Espressif WiFi module with a single-core Xtensa LX7 at 240MHz, 4MB flash, 320KB SRAM, built-in PCB antenna, native USB OTG, and rich peripheral support — a cost-effective WiFi
Arduino Uno R3
Microcontroller BoardThe quintessential beginner microcontroller board with ATmega328P @ 16MHz, 32KB Flash, 2KB SRAM, 14 digital I/O, 6 analog inputs, USB-B for programming, DC barrel jack, and the R3 expanded shield head
Raspberry Pi Zero W
sbcUltra-compact single-board computer with BCM2835 ARM11 at 1 GHz, 512MB RAM, built-in 802.11b/g/n WiFi (BCM43143), Bluetooth 4.1 LE, mini HDMI, microSD, camera connector, and 40-pin GPIO header in a 65
Adafruit Feather RP2040
Microcontroller BoardFeather-form-factor board with Raspberry Pi RP2040 dual-core Cortex-M0+ @ 133MHz, 264KB SRAM, 8MB Flash, 21 GPIO, 4 ADC, 2 PIO peripherals, USB-C with UF2 bootloader, STEMMA QT, and LiPo charging. Run
Adafruit Feather M0 Express
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with 2MB SPI flash for CircuitPython code storage, built-in NeoPixel, 256KB flash, 32KB RAM, native USB, and 100mA LiPo charger. The dedicated CircuitPython Fe
DC Boarduino
Dev BoardThe DC Boarduino is a slim, breadboard-friendly Arduino-compatible development board based on the ATmega328 at 16MHz, with a 2.1mm DC barrel jack for 7–17V input, USB-TTL serial header, ICSP programmi
Adafruit ItsyBitsy RP2040
Microcontroller BoardTiny 36×18mm breadboard-friendly board with Raspberry Pi RP2040 dual-core Cortex-M0+ @ 133MHz, 264KB SRAM, 8MB Flash, 23 GPIO, 4 ADC, 2 PIO peripherals, and Micro-USB. Runs CircuitPython and MicroPyth
Adafruit HUZZAH32 – ESP32 Feather
Dev BoardESP32 dual-core 240 MHz Feather board with 802.11b/g/n WiFi, Bluetooth 4.2 Classic and BLE, 4MB flash, 520KB SRAM, 12 ADC channels, 2 DACs, capacitive touch, and built-in LiPo charger.
Arduino Mega ADK
Dev BoardThe Arduino Mega R3 ADK is an ATmega2560-based development board with 54 digital I/O, 16 analog inputs, 4 hardware UARTs, and a USB Type-A host port (Android ADK) with a power boost converter — design
Adafruit Feather nRF52 Bluefruit LE (nRF52832)
Dev BoardnRF52832 ARM Cortex-M4F Feather board with native Bluetooth 5 LE at 64 MHz, 512KB flash, 64KB RAM, 8 analog inputs, 12 PWM channels, and built-in LiPo charger. FCC/IC/TELEC certified for production BL
Raspberry Pi 1 Model B
Dev BoardThe Raspberry Pi 1 Model B is the original production Raspberry Pi single-board computer, featuring a Broadcom BCM2835 ARM1176JZF-S at 700MHz, 512MB RAM, 100Mbps Ethernet, 2 USB 2.0 ports, HDMI, 26-pi
Adafruit Trinket M0
Dev BoardUltra-compact ATSAMD21E18 ARM Cortex-M0+ board at 48 MHz with 256KB flash, 32KB RAM, 5 GPIO pins, built-in RGB DotStar LED, capacitive touch, native USB, and CircuitPython support. Weighs just 1.4g in
Adafruit Feather 32u4 RFM69HCW (868/915 MHz)
Dev BoardFeather-format development board combining the ATmega32u4 microcontroller with an RFM69HCW 868/915 MHz packet radio for low-power sub-GHz wireless applications.
ESP32-C6 DevKitC-1-N8
Dev BoardOfficial Espressif development board featuring the ESP32-C6 — a RISC-V single-core MCU with WiFi 6, BLE 5.0, Zigbee 3.0, Thread 1.3, and native Matter support. 8MB flash, USB-C JTAG/serial.
Adafruit Feather 32u4 RFM96 LoRa (433 MHz)
Dev BoardFeather-format development board combining the ATmega32u4 microcontroller with an RFM96 LoRa 433 MHz transceiver for long-range, low-power IoT applications.
Adafruit Feather 32u4 RFM95 LoRa (900 MHz)
Dev BoardFeather-format development board combining the ATmega32u4 microcontroller with an RFM95 LoRa 868/915 MHz transceiver for long-range, low-power IoT applications.
Arduino Portenta X8
Compute ModuleIndustrial-grade Linux SoM with NXP i.MX 8M Mini quad-core Cortex-A53 at 1.8GHz + STM32H747 dual-core Cortex-M7/M4, 2GB RAM, WiFi/BLE, NXP SE050 hardware security, Docker containers, and OTA updates f
ESP32-H2 DevKitM-1-N4S
Dev BoardOfficial Espressif development board for the ESP32-H2 — a RISC-V MCU purpose-built for 802.15.4 wireless protocols: BLE 5.3, Zigbee 3.0, Thread 1.3, and Matter. No WiFi. 4MB flash, USB-C with CH343P.
Pycom LoPy
Dev BoardThe Pycom LoPy is a compact triple-network MicroPython-programmable board featuring ESP32 with built-in WiFi, BLE 4.2, and LoRa (SX1272) on 868/915 MHz — ideal for IoT mesh networking and asset tracki
Adafruit ItsyBitsy ESP32
Dev BoardUltra-compact ESP32 development board in the ItsyBitsy form factor with WiFi, Bluetooth Classic + BLE, USB-C, and LiPo charging — perfect for space-constrained wireless projects.
Pycom WiPy 3.0
Dev BoardThe Pycom WiPy 3.0 is a compact MicroPython-programmable ESP32 board with WiFi 802.11 b/g/n and Bluetooth BLE 4.2, designed for low-power wireless IoT applications and smart-home prototyping.
Adafruit HUZZAH32 ESP32 Feather Board
Dev BoardAdafruit's Feather-format ESP32 board with dual-core Xtensa LX6 @ 240MHz, WiFi b/g/n, Bluetooth Classic + BLE 4.2, built-in LiPo charger, and Feather-compatible pin layout. Great all-around wireless I
Adafruit Matrix Portal S3
Dev BoardESP32-S3 board designed to drive HUB75 LED matrix panels directly, with built-in WiFi, BLE 5.0, native USB, STEMMA QT connector, and two user buttons — ideal for dynamic digital signage and LED art di
Adafruit Feather M0 RFM69HCW Packet Radio (868/915 MHz)
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with RFM69HCW sub-GHz radio at 868/915 MHz. Up to +20 dBm TX power, AES-128 encryption, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.
Adafruit Feather ESP32-S3
Dev BoardFeather-format ESP32-S3 board with native USB, WiFi, BLE 5.0, 8MB flash, LiPo charging, and full Feather ecosystem compatibility — a capable wireless development platform for CircuitPython and Arduino
Adafruit Feather M0 RFM95 LoRa Radio (868/915 MHz)
Dev BoardATSAMD21G18 ARM Cortex-M0+ Feather board with RFM95 LoRa radio at 868/915 MHz. Spread-spectrum LoRa modulation for multi-kilometre range, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.
Heltec Wireless Stick Lite V3
Dev BoardCompact ESP32-S3 + SX1262 LoRa development board with WiFi, BLE 5.0, and integrated battery management. Meshtastic and LoRaWAN compatible, with a slim stick form factor ideal for IoT sensor nodes and
M5Stack FIRE V2.7
Dev BoardFeature-rich ESP32 IoT dev kit with 2.0" IPS display, 8MB PSRAM, 16MB flash, MPU6886 IMU, BMM150 magnetometer, 10x SK6812 RGB LEDs, microphone, speaker, microSD, 500mAh battery, and M5GO charging base
M5Stack Basic Core V2.7
Dev BoardCompact ESP32 IoT dev kit with 2.0" IPS LCD (320x240), 16MB flash, microSD, speaker, 110mAh battery, and three Grove ports in a stackable 54mm square enclosure.
BeagleV-Ahead
Single Board ComputerOpen-source RISC-V single board computer with Alibaba T-Head TH1520 quad-core Xuantie C910 at 2GHz, 4 TOPS NPU, 4GB LPDDR4, 16GB eMMC, WiFi/Bluetooth, Gigabit Ethernet, micro-HDMI, and BeagleBone cape
Heltec WiFi Kit 8
Development BoardESP8266-based IoT development board by Heltec with built-in 0.91-inch OLED display, Li-Po battery management, and WiFi connectivity in a compact 50.9x18.2mm form factor.
M5Stack Station-Bat
Industrial ControllerIndustrial ESP32 controller with 1.14" IPS LCD, 6 Grove ports, INA3221 power monitor, MPU6886 IMU, RTC, 7x SK6812 LEDs, dual 18650 battery holders, USB-A power output, and 16MB flash.
Heltec Sufficient IoT Hub
SBCLinux-based IoT hub with Allwinner T113-S3 dual-core ARM Cortex-A7 SoC, LoRa (SX1262), WiFi, Ethernet, and optional LTE. Runs Debian 10 with a dedicated IoT OS, CLI, and web UI for no-code device mana
Heltec CubeCell AM02 Module Plus
moduleUltra-compact LoRa/LoRaWAN module based on the ASR6502 SoC (ARM Cortex-M0+ @ 48MHz + SX1262), designed for SMT integration into custom IoT sensor nodes with 3.5uA deep sleep current.
Heltec HT-HC32 Wi-Fi HaLow Camera
Dev BoardESP32-S3 development board with integrated camera and Wi-Fi HaLow (802.11ah) module for long-range wireless video transmission up to 1-2km at speeds up to 32 Mbps. Features USB-C, SD card slot, and Li
Heltec MeshPocket
Power BankQi2 magnetic wireless charging power bank with integrated Meshtastic mesh networking node, featuring nRF52840 BLE + SX1262 LoRa radio and a 2.13" e-ink display. Available in 5000mAh and 10000mAh confi
Heltec CubeCell AB01 Dev-Board (V2)
Dev BoardUltra-low power LoRa/LoRaWAN development board based on the ASR6502 SiP (ARM Cortex-M0+ @ 48MHz + SX1262), with USB-C, solar panel support, and 3.5uA deep sleep current. Ideal for remote environmental
Heltec CubeCell 1/2AA Node (HTCC-AB02A)
Ultra-low-power LoRa/LoRaWAN development node based on the ASR6502 SoC (ARM Cortex-M0+ @ 48MHz + SX1262), with a built-in 1/2AA battery holder, 3.5uA deep sleep, and Arduino compatibility. Ideal for r
Heltec WiFi Kit 32 (V3)
Dev BoardESP32-S3-based IoT development board with built-in 0.96" OLED display, lithium battery management, WiFi and Bluetooth 5.0 connectivity, and USB-C interface in a compact 50mm form factor.
Heltec HRI-485X
DTUIndustrial RS-485 wireless converter with ESP32, LoRa SX1262, Ethernet, and ESPHome support. Converts RS-485/Modbus serial data to LoRa, LoRaWAN, LTE, or Ethernet for long-range industrial IoT communi
Heltec HT-DE01 Multi Size E-Ink Drive Board
A compact universal e-ink driver board based on ESP32-S3FN8 with WiFi and Bluetooth connectivity, 24-pin FFC interface compatible with most e-ink displays, USB-C and LiPo battery support, and Arduino
Heltec HT-CT62
moduleUltra-compact ESP32-C3 + SX1262 LoRa/LoRaWAN module with WiFi and BLE, designed for SMT integration into IoT devices. Features 10uA deep sleep, +21dBm TX power, and Meshtastic compatibility in a tiny
Heltec Wireless Bridge
Wireless BridgeESP32 + SX1276 LoRa multi-protocol bridge in an aluminum enclosure, converting between WiFi, Bluetooth, and LoRa with 8MB flash and 8MB PSRAM.
Heltec HT-M00S Single Channel LoRa Gateway
Lorawan GatewayA compact, wall-mountable single-channel LoRaWAN gateway based on the HT-CT62 module (ESP32-C3 + SX1262). Designed for indoor use with a built-in PCB antenna, it can listen to over a dozen LoRa nodes
Heltec Capsule Sensor V3
Ultra-compact IP65 waterproof LoRa sensor capsule with ESP32-S3, SX1262 LoRa, GNSS, temperature/humidity, barometric pressure, and 3-axis accelerometer. Meshtastic-compatible with 250mAh battery and o
BeagleV-Fire
Single Board ComputerRISC-V + FPGA single board computer powered by Microchip PolarFire MPFS025T with 4x RV64GC U54 cores at 667MHz, 23K FPGA logic elements, 2GB LPDDR4, 16GB eMMC, Gigabit Ethernet, M.2 E-Key, and BeagleB
Heltec Wireless Stick V3
Compact ESP32-S3 development board with integrated SX1262 LoRa transceiver and 0.49-inch OLED display. Supports Meshtastic, LoRaWAN, WiFi, and BLE 5.0 in a breadboard-friendly form factor with battery
CubeCell AM01 Module V2 (HTCC-AM01)
moduleUltra-compact 18x18mm LoRa/LoRaWAN module based on the ASR6502 SiP with integrated ARM Cortex-M0+ MCU and Semtech SX1262 transceiver. Features 3.5uA deep sleep, Arduino compatibility, and CE/FCC certi
Heltec Vision Master E213
ESP32-S3 development board with 2.13-inch E-Paper display and optional SX1262 LoRa radio, supporting Meshtastic, LoRaWAN, Arduino, and MicroPython. Features WiFi, BLE 5.0, ultra-low 20uA deep sleep, l
Heltec Vision Master E290
ESP32-S3 development board with 2.9-inch e-ink display and optional SX1262 LoRa radio, featuring Raspberry Pi GPIO header, Meshtastic support, and 18uA deep sleep for battery-powered IoT and mesh netw
Heltec Wireless Paper
ESP32-S3 + SX1262 LoRa E-Ink development board with 2.13" e-paper display, WiFi, BLE 5.0, and LoRa connectivity. Designed for electronic shelf labels, Meshtastic mesh nodes, and low-power IoT sensor d
Heltec Mesh Node T114
Compact nRF52840 + SX1262 LoRa development board with BLE 5.0, optional 1.14" TFT display and L76K GPS module. Designed for Meshtastic mesh networking, LoRaWAN, and battery-powered IoT deployments wit
Heltec HT-M02 Edge LoRa Gateway (V2)
Lorawan GatewayIP66 waterproof edge computing LoRaWAN gateway with Rockchip RK3566 quad-core Cortex-A55 SoC, SX1303+SX1250 8-channel LoRa concentrator, 2GB DDR4, 32GB eMMC, pre-installed Debian Linux with Docker, an
CubeCell Dev-Board Plus (HTCC-AB02)
Heltec CubeCell HTCC-AB02 is an ultra-low-power LoRa/LoRaWAN development board based on the ASR6502 SoC (ARM Cortex-M0+ with integrated SX1262), featuring a 0.96" OLED display, solar panel input, and
Heltec HT-H7608 V2
Router GatewayWiFi HaLow (802.11ah) router and IoT gateway with 2.4GHz dual-band, up to 1km+ range, mesh networking, Ethernet, and OpenWrt-compatible MT7628 SoC.
Heltec Turtle Board
Ultra-low-power LoRa development board with STM32L432KC ARM Cortex-M4 MCU and SX1276 transceiver, capable of 10-year battery life on AAA cells using the RadioShuttle peer-to-peer protocol.
BeagleBone AI-64
Single Board ComputerPowerful open-source AI/ML single board computer featuring TI TDA4VM SoC with dual Arm Cortex-A72 at 2.0 GHz, 8 TOPS deep-learning accelerator, C7x DSP, 4GB LPDDR4, 16GB eMMC, USB 3.0, Gigabit Etherne
BeagleBone Black
Single Board ComputerLow-cost, community-supported ARM Cortex-A8 development platform with 512MB DDR3L, 4GB eMMC, HDMI, USB, 10/100M Ethernet, 2x PRUs, and expandable via BeagleBone capes. Boots Linux in under 10 seconds.
BeagleBone Black Industrial
Single Board ComputerIndustrial-rated BeagleBone Black with extended temperature range (-40°C to +85°C), TI Sitara AM3358 ARM Cortex-A8 at 1 GHz, full cape and software compatibility, for harsh environment deployments.
Arduino UNO R4 WiFi
Dev BoardArduino's flagship UNO board upgraded with Renesas RA4M1 ARM Cortex-M4F at 48MHz, ESP32-S3 WiFi/BLE 5.0, built-in 12×8 LED matrix, 12-bit DAC, CAN bus, op-amp, and Qwiic connector — all in the classic
Arduino UNO R4 Minima
Dev BoardThe affordable entry to Arduino's R4 generation — Renesas RA4M1 ARM Cortex-M4F at 48MHz with 256KB flash, 32KB SRAM, 12-bit DAC, CAN bus, op-amp, and USB-C in the classic UNO form factor at 5V. No wir
Arduino Nano ESP32
Dev BoardArduino Nano form factor powered by ESP32-S3 with WiFi 802.11 b/g/n, Bluetooth LE 5.0, dual-core Xtensa LX7 at 240MHz, 8MB flash, 512KB SRAM, USB-C, and HID support — Arduino's compact IoT powerhouse
Arduino Nano Every
Dev BoardCompact 45×18mm Arduino Nano with ATMega4809 at 20MHz — 48KB flash, 6KB SRAM, 5V logic, 14 digital I/O (5 PWM), 8 analog inputs, and USB-C. A modern, affordable 8-bit board for embedded projects and b
Arduino GIGA R1 WiFi
Dev BoardArduino's most powerful board — dual-core STM32H747XI with Cortex-M7 at 480MHz + Cortex-M4 at 240MHz, 2MB flash, 1MB RAM, WiFi, Bluetooth, 76 GPIO, USB-A + USB-C, 3.5mm audio jack, camera connector, a
Arduino Nano 33 BLE Sense Rev2
Dev BoardSensor-packed Nano board with nRF52840 ARM Cortex-M4F at 64MHz, BLE 5.0, 9-axis IMU, microphone, temperature, humidity, pressure, light, and gesture sensors — designed for TinyML and edge AI projects
Arduino Nano RP2040 Connect
Dev BoardNano form factor board with RP2040 dual-core Cortex-M0+ at 133MHz, 16MB flash, 264KB SRAM, WiFi 802.11 b/g/n and BLE via u-blox NINA-W102, built-in 6-axis IMU and microphone, 22 digital I/O with 20 PW
Arduino Nano R4
Dev BoardThe newest Arduino Nano — Renesas RA4M1 ARM Cortex-M4F at 48MHz with 256KB flash, 32KB SRAM, Qwiic connector, RGB LED, castellated pins, and USB-C in an ultra-compact 43×17mm form factor. No wireless,
Arduino UNO Q
sbcArduino's first Linux-capable UNO — Qualcomm Dragonwing QRB2210 quad-core Cortex-A53 + STM32U585 real-time co-processor, 2GB/4GB RAM, 16GB eMMC, WiFi 5, Bluetooth 5.1, 8×13 LED matrix, USB-C, and AI-r
Arduino Uno Rev3
Dev BoardThe original Arduino UNO — the world's most popular development board with ATmega328P at 16MHz, 32KB flash, 2KB SRAM, 14 digital I/O (6 PWM), 6 analog inputs, USB-B, and 5V operation. The gateway to e
Arduino Nano
Dev BoardThe classic breadboard-friendly Arduino — ATmega328P at 16MHz, 32KB flash, 2KB SRAM, 14 digital I/O (6 PWM), 8 analog inputs, Mini-B USB, and 5V operation in a tiny 45×18mm form factor. The compact or
Arduino Stella
Dev BoardArduino's Ultra-Wideband (UWB) board with nRF52840 ARM Cortex-M4F, Truesense DCU040 UWB module, BLE 5.0, and NFC — enabling centimeter-accurate indoor positioning, asset tracking, and secure proximity
Arduino MKR WAN 1310
Dev BoardLoRa-enabled IoT board with SAMD21 ARM Cortex-M0+ at 48MHz, Murata CMWX1ZZABZ LoRa module, ECC508 crypto chip, 2MB SPI flash, onboard LiPo charger, and 104\u00b5A low-power mode — designed for long-ra
Arduino Portenta C33
Compute ModuleCost-effective Portenta module with Renesas RA6M5 ARM Cortex-M33 at 200MHz, 2MB flash, 512KB SRAM, WiFi/BLE, hardware security, and Portenta/MKR compatibility — bringing industrial IoT capabilities at
NanoPi R2S
sbcBudget dual-GbE router board with RK3328 quad-core Cortex-A53 at 1.3GHz, 1GB DDR4, native + USB 3.0 Gigabit Ethernet, and USB-C power — the most affordable open-source OpenWrt router platform at just
NanoPC-T6 Plus
sbcFriendlyElec's flagship RK3588 SBC with 4x Cortex-A76 + 4x Cortex-A53 at 2.4GHz, up to 32GB LPDDR5, NVMe M.2, dual 2.5GbE, dual HDMI out + HDMI in, 6 TOPS NPU, 8K video, 40-pin GPIO, and USB-C PD powe
NanoPi R6S
sbcHigh-performance RK3588S router board with 8GB LPDDR4X, 32GB eMMC, native Gigabit + dual 2.5GbE, HDMI 2.1 (8K), USB 3.0, and 6 TOPS NPU — ideal for OpenWrt/FriendlyWrt router, NAS, and edge computing.
NanoPi M5
sbcMid-range RK3576 SBC with 4x Cortex-A72 + 4x Cortex-A53 at 2.2GHz, up to 8GB RAM, dual Gigabit Ethernet, M.2 NVMe, HDMI 4K, 6 TOPS NPU, MIPI-CSI/DSI, 30-pin GPIO, and USB-C PD in a compact 90×62mm for
NanoPi R4S
sbcPopular RK3399 dual-GbE router board with 2x Cortex-A72 + 4x Cortex-A53, 4GB LPDDR4, dual Gigabit Ethernet, 2x USB 3.0, metal case option, and OpenWrt/FriendlyWrt support — the go-to affordable open-s
BigTreeTech SKR Pro V1.1
3D Printer Control Board32-bit 3D printer control board powered by STM32F407ZGT6 @ 168MHz. Supports 6 stepper drivers, triple extruder, dual Z, 12–24V input. Compatible with Marlin and Klipper firmware.
NanoPi Zero2
sbcUltra-compact 45\u00d745mm Linux SBC with RK3528A quad-core Cortex-A53 at 1.8GHz, up to 2GB RAM, Gigabit Ethernet, M.2 WiFi slot, USB 2.0, 30-pin GPIO, and 4K HDMI — starting at just $18.
BigTreeTech SKR V1.4 Turbo
3D Printer Control Board32-bit 3D printer control board with LPC1769 @ 120MHz. Supports 5 stepper driver sockets, dual Z, 12–24V, TMC2209 UART. Popular Marlin and Klipper compatible upgrade board.
BigTreeTech SKR Mini E3 V1.2
3D Printer Control BoardUltra-quiet 32-bit 3D printer board with 4 integrated TMC2209 UART stepper drivers. STM32F103RCT6 @ 72MHz. Direct drop-in replacement for Ender 3. Supports Marlin and Klipper.
BigTreeTech Octopus Pro V1.1
3D Printer Control BoardHigh-voltage 3D printer control board with STM32H723ZE MCU, 8 stepper driver slots supporting up to 60V motor power, CAN bus, PT100/PT1000 support, and Marlin/Klipper/RRF firmware.
BigTreeTech Octopus Max EZ V1.0
3D Printer Control BoardHigh-end 32-bit 3D printer control board with STM32H723ZET6 MCU at 550MHz, 10 EZ-socket stepper driver slots, CAN bus, eFuse protection, and Marlin/Klipper firmware support.
BigTreeTech SKR Mini E3 V2.0
3D Printer Control BoardImproved 32-bit control board with 4 integrated TMC2209 UART drivers, dual Z ports, and STM32F103RCT6 @ 72MHz. Drop-in upgrade for Ender 3, CR-10S, Ender 5. Marlin and Klipper ready.
BigTreeTech SKR Mini E3 V3.0
3D Printer Control BoardLatest 32-bit SKR Mini E3 with STM32G0B1RET6 @ 64MHz, 4 integrated TMC2209 UART drivers, USB-C, and CAN bus support. Compact Ender 3 drop-in upgrade. Marlin and Klipper compatible.
NanoPi R5S-LTS
sbcRK3568B2 router board with quad-core Cortex-A55 at 2.0GHz, up to 4GB RAM, 32GB eMMC, native GbE + dual 2.5GbE, M.2 PCIe, 2x USB 3.0, HDMI 4K, and USB-C PD — the mid-range OpenWrt router with long-term
BigTreeTech BTT Pi V1.2
Single Board ComputerSingle board computer by BigTreeTech with Allwinner H616 quad-core Cortex-A53, 1GB DDR3L RAM, WiFi, 100Mbps Ethernet, and 40-pin GPIO. Drop-in Raspberry Pi CM4 alternative for Klipper 3D printing.
BigTreeTech Manta M8P V1.1
3D Printer Control Board8-axis Klipper-native 3D printer control board with STM32G0B1VET6 MCU, BTB connector for CM4/CB1, CAN bus, eFuse protection, Ethernet, and selectable CNC fan voltage.
BigTreeTech SKR Pico V1.0
3D Printer Control BoardCompact 32-bit 3D printer control board powered by RP2040 @ 133MHz. Designed for Voron 0.1 and small printers. 4 TMC2209 sockets, USB-C, 12–24V input. Klipper and Marlin compatible.
NanoPi R5C
sbcCompact dual 2.5GbE router with RK3568B2 quad-core Cortex-A55 at 2.0GHz, up to 4GB RAM, dual USB 3.2, HDMI, M.2, and 0.8 TOPS NPU in a tiny 58\u00d758mm form factor — the small-footprint 2.5G OpenWrt
NanoPi R6C
sbcRK3588S router board with 4x Cortex-A76 + 4x Cortex-A53, up to 8GB RAM, 32GB eMMC, native GbE + 2.5GbE, M.2 NVMe, HDMI 8K, 6 TOPS NPU, and USB-C PD — the mid-range RK3588S router with NVMe storage sup
BigTreeTech CB2
Single Board ComputerCompute module by BigTreeTech powered by Rockchip RK3566 quad-core Cortex-A55 at 1.8GHz, 2GB/4GB LPDDR4, 32GB eMMC, Gigabit Ethernet, WiFi 5 (802.11ac), and Bluetooth 5.2. CM4-form-factor.
BigTreeTech SKR 3
3D Printer Control BoardHigh-performance 32-bit 3D printer board with STM32H743VI @ 480MHz, 5 driver slots, CAN bus, FDCAN, WiFi module support, 12–24V, 10A bed output. Marlin, Klipper, and RepRapFirmware compatible.
BigTreeTech Octopus V1.1
3D Printer Control Board32-bit 3D printer control board with STM32F446ZET6 MCU, 8 stepper driver slots (9 outputs), CAN bus via RJ11, USB-C, WiFi header, and support for Marlin and Klipper firmware.
NanoPC-T6 LTS
sbcLong-term support RK3588 SBC with 4x Cortex-A76 + 4x Cortex-A53 at 2.4GHz, up to 16GB LPDDR4X, NVMe PCIe 3.0 x4, dual 2.5GbE, dual HDMI, MIPI-CSI/DSI, 6 TOPS NPU, and 40-pin GPIO — the LTS variant for
BigTreeTech SKR 3 EZ
3D Printer Control BoardAdvanced 32-bit 3D printer board with STM32H743VI @ 480MHz and EZ driver system (tool-free). 5 EZ driver slots, CAN/FDCAN, WiFi module support, 10A bed, 12–24V. Marlin, Klipper, RRF ready.
BigTreeTech PAD 7
Single Board Computer7-inch all-in-one 3D printer control panel with 1024x600 IPS touchscreen, pre-installed CB1 core board running Klipper, Ethernet, WiFi, 3x USB 2.0, CAN bus, and built-in speaker.
NanoPi M6
sbcRK3588S SBC with 4x Cortex-A76 + 4x Cortex-A53 at 2.4GHz, up to 32GB LPDDR5, M.2 NVMe, Gigabit Ethernet, HDMI 2.1 (8K), dual MIPI-DSI/CSI, 6 TOPS NPU, and USB-C PD — FriendlyElec's compact RK3588S des
BigTreeTech Manta M4P V1.0
3D Printer Control BoardKlipper-native 3D printer control board with STM32G0B0RE MCU and BTB connector for Raspberry Pi CM4 or BTT CB1, 4 stepper driver slots, Ethernet, USB-C, and CAN bus support.
NanoPi R2S Plus
sbcEnhanced RK3328 dual-GbE router with quad-core Cortex-A53 at 1.4GHz, 1GB DDR4, 32GB eMMC onboard, dual Gigabit Ethernet, optional WiFi, and metal case — the R2S upgrade with built-in storage for relia
BigTreeTech Manta E3EZ V1.0
3D Printer Control BoardKlipper-ready 3D printer control board for Ender 3/5 with STM32G0B1 MCU, BTB connector for CM4/CB1, 5 EZ stepper slots, CAN bus, and direct Ender 3 compatibility.
BigTreeTech SKRat V1.0
3D Printer Control BoardCompact 32-bit 3D printer control board with STM32G0B1VET6 MCU, 5 stepper driver slots, CAN-FD bus, USB-C, and support for both Marlin and Klipper firmware.
BIQU RGBDuino UNO V1.2
microcontrollerArduino UNO-compatible development board based on ATmega328P-AU at 16MHz/5V, featuring RGB LED indicators. Available in Geek Duck (V1.1) and Jenny (V1.2) variants for maker and education projects.
BigTreeTech ESP8266 WiFi Module
Wireless ModuleESP8266-based WiFi transceiver expansion module for BTT 3D printer control boards. Available in ESP12S and ESP-07 variants, enabling wireless connectivity and remote control via serial UART.
BigTreeTech S42C V1.0 Closed Loop Stepper Driver
Motor DriverNEMA 17 (42mm) stepper motor closed-loop driver board with OLED display. Uses encoder feedback to eliminate missed steps and improve high-speed 3D printer and CNC motor performance.
BigTreeTech EBB 36/42 CAN Bus Toolhead Board
Toolhead BoardCAN bus toolhead board for 36/42mm stepper extruders. Features STM32G0B1 MCU, onboard TMC2209, ADXL345 accelerometer, PT100/PT1000 support, and USB/CAN connectivity for Klipper 3D printers.
BigTreeTech EBB SB2209 CAN Toolhead Board (RP2040)
Toolhead BoardToolhead board designed for the Voron StealthBurner. Powered by RP2040, supports CAN and USB, includes TMC2209, ADXL345 accelerometer, and PT100/PT1000 for Klipper 3D printers.
BigTreeTech MMB CAN V2.0 Multi-Material Control Board
Expansion BoardCAN bus control board for the Enraged Rabbit Carrot Feeder (ERCF) multi-material system. Features STM32G0B1 MCU, 4 EZ stepper driver slots, USB/CAN connectivity, and full Klipper support.
BigTreeTech BTT RRF WiFi V1.0 Module
Wireless ModuleESP8266-based WiFi expansion module for RepRapFirmware (Duet-style) boards. Adds wireless connectivity to BTT SKR V1.3, SKR V1.4 Turbo, and compatible boards running RRF or Marlin firmware.
BigTreeTech Scylla V1.0
Cnc ControllerSTM32H723-based CNC engraving machine control board with 4x TMC2160 drivers (24-56V/4.7A RMS), RepRapFirmware support, ESP32 WiFi, USB-C, RS-485, CAN bus, VFD spindle control, and relay output.
Libre Computer Alta
Single Board ComputerLibre Computer Alta (AML-A311D-CC) — Amlogic A311D hexa-core SBC with 4GB LPDDR4, 5 TOPS NPU, Mali-G52 GPU, 4× USB 3.0, Gigabit Ethernet with PoE, and 4K HDR HDMI 2.0 in a Pi-compatible form factor.
Libre Computer Renegade Elite
Single Board ComputerLibre Computer Renegade Elite (ROC-RK3399-PC) — Rockchip RK3399 SBC with dual Cortex-A72 + quad Cortex-A53, 4GB LPDDR4, M.2 PCIe, DisplayPort 1.2, HDMI 2.0, and UEFI BIOS in a 120×72mm form factor.
Libre Computer Solitude
Single Board ComputerLibre Computer Solitude (AML-S905D3-CC) — Amlogic S905D3 quad-core Cortex-A55 SBC with 2/4GB LPDDR4, 1.2 TOPS NPU, 4× USB 3.0, Gigabit Ethernet with PoE, and 4K HDR HDMI 2.0 in a Pi-compatible layout.
Milk-V Mars
SBCCredit card-sized RISC-V SBC with quad-core StarFive JH7110 @ 1.5GHz, up to 8GB LPDDR4, Gigabit Ethernet with PoE, 40-pin GPIO, 4K HDMI. Raspberry Pi form factor.
Milk-V Duo S
SBCCompact RISC-V/ARM dev board with SG2000 SoC, 512MB RAM, optional WiFi 6/BT5, dual MIPI CSI cameras, 0.5 TOPS TPU. Runs Linux and RTOS simultaneously.
Milk-V Meles
SBCRISC-V SBC with quad-core T-Head TH1520 @ 1.85GHz, up to 16GB LPDDR4X, 4 TOPS NPU, WiFi 5/BT 5.2, 4K HDMI, Vulkan GPU. Credit card-sized form factor.
Milk-V Jupiter2
SBCFirst RVA23-compliant RISC-V SBC with octa-core SpacemiT K3 @ 2.4GHz, up to 32GB LPDDR5, 60 TOPS AI accelerator, WiFi 6/BT 5.2, 10GbE SFP+, real-time processor.
Milk-V Megrez
Mini ITXMini-ITX RISC-V board with quad-core SiFive P550 @ 1.8GHz (ESWIN EIC7700X), up to 32GB LPDDR5, 19.95 TOPS NPU, 8K video codec, PCIe x8 slot, SATA3.
Pine64 Oz64
sbcRISC-V and ARM dual-ISA single board computer powered by the Sophgo SG2000 SoC with 512MB DDR3, WiFi 6, BLE 5.2, 10/100 Ethernet, dual MIPI-CSI camera ports, and 0.5 TOPS NPU. Hardware switch selects
Get notified when new devices are added.
More to explore — popular traits shared by devices with Bus Interfaces: UART.