# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**11 device listed.**

## BeagleBone AI-64

Powerful open-source AI/ML single board computer featuring TI TDA4VM SoC with dual Arm Cortex-A72 at 2.0 GHz, 8 TOPS deep-learning accelerator, C7x DSP, 4GB LPDDR4, 16GB eMMC, USB 3.0, Gigabit Ethernet, and BeagleBone cape compatibility.

[Details](https://openhardware.directory/devices/beaglebone-ai-64) | [Markdown](https://openhardware.directory/devices/beaglebone-ai-64/md)

## BeagleBone Black

Low-cost, community-supported ARM Cortex-A8 development platform with 512MB DDR3L, 4GB eMMC, HDMI, USB, 10/100M Ethernet, 2x PRUs, and expandable via BeagleBone capes. Boots Linux in under 10 seconds.

[Details](https://openhardware.directory/devices/beaglebone-black) | [Markdown](https://openhardware.directory/devices/beaglebone-black/md)

## BeagleBone Black Industrial

Industrial-rated BeagleBone Black with extended temperature range (-40°C to +85°C), TI Sitara AM3358 ARM Cortex-A8 at 1 GHz, full cape and software compatibility, for harsh environment deployments.

[Details](https://openhardware.directory/devices/beaglebone-black-industrial) | [Markdown](https://openhardware.directory/devices/beaglebone-black-industrial/md)

## BeagleV-Ahead

Open-source RISC-V single board computer with Alibaba T-Head TH1520 quad-core Xuantie C910 at 2GHz, 4 TOPS NPU, 4GB LPDDR4, 16GB eMMC, WiFi/Bluetooth, Gigabit Ethernet, micro-HDMI, and BeagleBone cape headers.

[Details](https://openhardware.directory/devices/beaglev-ahead) | [Markdown](https://openhardware.directory/devices/beaglev-ahead/md)

## BeagleV-Fire

RISC-V + FPGA single board computer powered by Microchip PolarFire MPFS025T with 4x RV64GC U54 cores at 667MHz, 23K FPGA logic elements, 2GB LPDDR4, 16GB eMMC, Gigabit Ethernet, M.2 E-Key, and BeagleBone cape headers.

[Details](https://openhardware.directory/devices/beaglev-fire) | [Markdown](https://openhardware.directory/devices/beaglev-fire/md)

## BigTreeTech BTT Pi V1.2

Single board computer by BigTreeTech with Allwinner H616 quad-core Cortex-A53, 1GB DDR3L RAM, WiFi, 100Mbps Ethernet, and 40-pin GPIO. Drop-in Raspberry Pi CM4 alternative for Klipper 3D printing.

[Details](https://openhardware.directory/devices/bigtreetech-btt-pi-v1-2) | [Markdown](https://openhardware.directory/devices/bigtreetech-btt-pi-v1-2/md)

## BigTreeTech CB2

Compute module by BigTreeTech powered by Rockchip RK3566 quad-core Cortex-A55 at 1.8GHz, 2GB/4GB LPDDR4, 32GB eMMC, Gigabit Ethernet, WiFi 5 (802.11ac), and Bluetooth 5.2. CM4-form-factor.

[Details](https://openhardware.directory/devices/bigtreetech-cb2) | [Markdown](https://openhardware.directory/devices/bigtreetech-cb2/md)

## BigTreeTech PAD 7

7-inch all-in-one 3D printer control panel with 1024x600 IPS touchscreen, pre-installed CB1 core board running Klipper, Ethernet, WiFi, 3x USB 2.0, CAN bus, and built-in speaker.

[Details](https://openhardware.directory/devices/bigtreetech-pad-7) | [Markdown](https://openhardware.directory/devices/bigtreetech-pad-7/md)

## Libre Computer Alta

Libre Computer Alta (AML-A311D-CC) — Amlogic A311D hexa-core SBC with 4GB LPDDR4, 5 TOPS NPU, Mali-G52 GPU, 4× USB 3.0, Gigabit Ethernet with PoE, and 4K HDR HDMI 2.0 in a Pi-compatible form factor.

[Details](https://openhardware.directory/devices/libre-computer-alta) | [Markdown](https://openhardware.directory/devices/libre-computer-alta/md)

## Libre Computer Renegade Elite

Libre Computer Renegade Elite (ROC-RK3399-PC) — Rockchip RK3399 SBC with dual Cortex-A72 + quad Cortex-A53, 4GB LPDDR4, M.2 PCIe, DisplayPort 1.2, HDMI 2.0, and UEFI BIOS in a 120×72mm form factor.

[Details](https://openhardware.directory/devices/libre-computer-renegade-elite) | [Markdown](https://openhardware.directory/devices/libre-computer-renegade-elite/md)

## Libre Computer Solitude

Libre Computer Solitude (AML-S905D3-CC) — Amlogic S905D3 quad-core Cortex-A55 SBC with 2/4GB LPDDR4, 1.2 TOPS NPU, 4× USB 3.0, Gigabit Ethernet with PoE, and 4K HDR HDMI 2.0 in a Pi-compatible layout.

[Details](https://openhardware.directory/devices/libre-computer-solitude) | [Markdown](https://openhardware.directory/devices/libre-computer-solitude/md)