# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**7 device listed.**

## BigTreeTech BTT Pi V1.2

Single board computer by BigTreeTech with Allwinner H616 quad-core Cortex-A53, 1GB DDR3L RAM, WiFi, 100Mbps Ethernet, and 40-pin GPIO. Drop-in Raspberry Pi CM4 alternative for Klipper 3D printing.

[Details](https://openhardware.directory/devices/bigtreetech-btt-pi-v1-2) | [Markdown](https://openhardware.directory/devices/bigtreetech-btt-pi-v1-2/md)

## BigTreeTech CB2

Compute module by BigTreeTech powered by Rockchip RK3566 quad-core Cortex-A55 at 1.8GHz, 2GB/4GB LPDDR4, 32GB eMMC, Gigabit Ethernet, WiFi 5 (802.11ac), and Bluetooth 5.2. CM4-form-factor.

[Details](https://openhardware.directory/devices/bigtreetech-cb2) | [Markdown](https://openhardware.directory/devices/bigtreetech-cb2/md)

## BigTreeTech PAD 7

7-inch all-in-one 3D printer control panel with 1024x600 IPS touchscreen, pre-installed CB1 core board running Klipper, Ethernet, WiFi, 3x USB 2.0, CAN bus, and built-in speaker.

[Details](https://openhardware.directory/devices/bigtreetech-pad-7) | [Markdown](https://openhardware.directory/devices/bigtreetech-pad-7/md)

## BigTreeTech Panda Touch

5-inch 800x480 IPS WiFi touchscreen for Bambu Lab X1, P1, and A1 series 3D printers. ESP32-S3 based, 16MB flash, 8MB PSRAM, built-in battery for portable use, supports up to 4 printers simultaneously.

[Details](https://openhardware.directory/devices/bigtreetech-panda-touch) | [Markdown](https://openhardware.directory/devices/bigtreetech-panda-touch/md)

## BigTreeTech K-Touch

5-inch 800x480 IPS WiFi touchscreen controller for Klipper printers. ESP32-S3 based, 16MB flash, 8MB PSRAM, built-in battery for 30 minutes portable use, supports up to 50 Klipper printers.

[Details](https://openhardware.directory/devices/bigtreetech-k-touch) | [Markdown](https://openhardware.directory/devices/bigtreetech-k-touch/md)

## BigTreeTech KNOMI 2

1.28-inch round 240x240 LCD display for Voron StealthBurner toolhead. ESP32 MCU with WiFi and Bluetooth LE, shows print status, temperatures, and progress with customizable animated UI.

[Details](https://openhardware.directory/devices/bigtreetech-knomi-2) | [Markdown](https://openhardware.directory/devices/bigtreetech-knomi-2/md)

## BigTreeTech Panda Knomi

1.28-inch round 240x240 display for Bambu Lab A1, X1, and P1 series printers. ESP32 MCU with 2.4GHz WiFi, customizable GIF animations, shows print status and temperatures wirelessly.

[Details](https://openhardware.directory/devices/bigtreetech-panda-knomi) | [Markdown](https://openhardware.directory/devices/bigtreetech-panda-knomi/md)