Filter by board/chip type
92 categories · 781 devices total
A general-purpose development board designed for prototyping, learning, and building custom firmware projects.
Single board computer running a full Linux operating system
Standalone wireless or compute module designed for integration into custom PCBs.
Development board based on the Espressif ESP32 Xtensa LX6 SoC with Wi-Fi 802.11 b/g/n and Bluetooth 4.2.
Development board based on the Espressif ESP32-S3 dual-core Xtensa LX7 SoC with Wi-Fi, BLE 5, and USB OTG.
Sensor-focused module or breakout board for measuring physical or environmental quantities.
A compact development board built around a microcontroller, providing GPIO, USB, and common peripheral interfaces for embedded projects.
Adafruit Feather form factor — a standardized 50.8×22.8 mm board with LiPo charging, USB, and FeatherWing accessory compatibility.
Development board based on the Espressif ESP32-S2 single-core Xtensa LX7 SoC with native USB OTG and Wi-Fi 802.11 b/g/n.
Complete single-board computer capable of running Linux or RTOS.
A compact, connector-based SBC variant designed for integration into custom carrier boards. No exposed USB or HDMI ports; all connectivity via high-density board-to-board connectors.
Purpose-built IoT controller board designed for a specific application such as HVAC control, smart switching, or appliance automation.
DIN-rail mountable industrial control board with relay outputs, digital inputs, and communication interfaces for automation applications.
Development board based on the Espressif ESP32-C3 RISC-V SoC with Wi-Fi 802.11 b/g/n and Bluetooth 5 LE.
Hardware security research and penetration testing tool designed for fault injection, voltage glitching, or side-channel analysis.
A Data Transfer Unit — a sealed, ready-to-deploy device that bridges wired protocols (RS485, RS232) to wireless networks (LoRa, cellular).
Field-Programmable Gate Array development board for custom digital logic design, hardware prototyping, and soft-core processor implementation.
Purpose-built IoT board with integrated sensor interface for specific data acquisition tasks
Flight controller board designed for drones, multicopters, and fixed-wing aircraft stabilization
Printed circuit board designed as a drop-in replacement or standalone keyboard controller, typically supporting hot-swap switches and standard case mounting.
A LoRaWAN gateway device that receives packets from LoRa end-nodes and forwards them to a network server over WiFi, Ethernet, or cellular backhaul.
Hardware Attached on Top (HAT) expansion board for Raspberry Pi, following the standard 40-pin GPIO header and mechanical specification.
Development board built around Raspberry Pi's RP2350 microcontroller, featuring dual Cortex-M33 or RISC-V Hazard3 cores at 150MHz.
A wearable computing device in watch form factor with display, sensors, and wireless connectivity.
Development board based on the Espressif ESP8266 single-core Tensilica L106 SoC with integrated Wi-Fi 802.11 b/g/n.
KVM-over-USB or KVM-over-IP devices for remote keyboard, video, and mouse control of computers.
A microcontroller board designed for beginners and classroom use, with built-in sensors, LEDs, and easy-to-use programming environments.
Handheld or portable gaming device with display, buttons, and speaker for playing retro or custom games.
An all-in-one computer integrated into a keyboard form factor, combining processing hardware with a built-in keyboard for a compact desktop experience.
Programmable macro keypad with mechanical switches for custom shortcuts and automation.
Programmable robot kit with motors, sensors, and wireless control. Designed for building autonomous or remote-controlled robots.
Castellated-pad module designed for SMT soldering onto carrier boards.
A standalone display module without an integrated microcontroller, intended to be connected to an external MCU.
Development board based on the Espressif ESP32-P4 high-performance dual-core RISC-V SoC at 360MHz with large PSRAM, MIPI camera, and ESP32-C6 for Wi-Fi 6 and Bluetooth 5.
Dedicated PCB for controlling one or more fans via PWM with temperature monitoring and smart home integration.
Development board based on the Canaan KENDRYTE K230 dual-core 64-bit RISC-V SoC at 1.6GHz with integrated KPU AI accelerator, GPU, VPU, and H.264/H.265 encode/decode for edge AI applications.
A dedicated power management or battery charging module providing regulated voltage output, battery management, or energy harvesting capabilities without an integrated application MCU.
Development board based on an STMicroelectronics STM32 ARM Cortex-M microcontroller for embedded and IoT applications.
Wireless access point or hub device that coordinates and communicates with remote tags, sensors, or endpoints over RF.
A compact board designed primarily for tracking the location of assets, vehicles, or animals using GNSS and long-range wireless communication.
Development board designed primarily for audio applications, with integrated DAC, amplifier, or codec for driving speakers or headphones.
Purpose-built PCB designed for interfacing and communicating with external equipment such as heat pumps, HVAC systems, or industrial controllers.
Wireless communication device for sending and receiving messages over radio, LoRa, or other protocols without internet connectivity.
A fully assembled, ready-to-use consumer product with enclosure and polished user experience. No soldering or programming required.
A standardized small satellite development kit following the CubeSat form factor (1U = 10x10x10cm), designed for education and experimentation.
Unassembled electronics kit requiring user assembly. Includes all components and step-by-step instructions for building the device from scratch.
Hardware evaluation board for prototyping and testing specific chips or modules.
Add-on module that extends the capabilities of a host device with additional hardware features.
A handheld gaming device with display, controls, and programmable microcontroller, capable of running games and interactive programs.
Portable handheld device with integrated keyboard and display designed for text messaging over radio
An all-in-one IoT board with integrated touchscreen display, WiFi connectivity, and a microcontroller — designed for building internet-connected dashboards and GUIs.
A LoRa/LoRaWAN gateway device that bridges LoRa radio nodes to IP networks, enabling long-range IoT connectivity.
Integrated LoRa transceiver device designed and pre-configured for the Meshtastic mesh networking protocol. Typically includes display, GPS, and battery in a compact enclosure.
Portable multi-function device combining multiple wireless protocols and hardware interfaces
A portable battery pack form factor that also integrates communication or IoT capabilities.
Network router or IoT gateway device that bridges different network protocols and provides connectivity to downstream devices.
A wall-mounted or panel-mounted device with integrated display and touch screen for smart home control or industrial HMI applications.
A connected thermostat for controlling heating, ventilation, and air conditioning systems with touchscreen and wireless interfaces.
A radio transceiver capable of both transmitting and receiving RF signals on one or more frequency bands.
A device designed to bridge between different wireless protocols such as WiFi, Bluetooth, and LoRa, enclosed in an aluminum shell for deployment.