SPI

ESP32-S3 handheld dev board with QWERTY keyboard, trackball, 2.8" IPS LCD, LoRa SX1262, GPS, speaker, dual microphones, and 2000mAh battery in an ABS case.

ESP32-PICO-D4 development board with LoRa SX1276/SX1278 radio, 0.96\" SSD1306 OLED, microSD slot, WiFi, Bluetooth 4.2, and LiPo battery support in a compact 66×36mm form factor.

A pocket-sized ESP32-S3 development board with a 4.7-inch capacitive touchscreen e-paper display (960×540, 16 grayscale), anti-glare glass, warm-toned backlight, MagSafe wireless charging, and compreh

Ultra-compact ESP32 development board with W5500 SPI Ethernet, 0.96" OLED display, Wi-Fi, Bluetooth 4.2, and USB-C. Only 29.5×23mm for embedded IoT gateway projects.

Open-source ESP32-S3 smartwatch with LoRa, 1.3" 240×240 IPS touchscreen, haptic feedback, accelerometer, speaker, microphone, IR transmitter, and 1500mAh battery. Supports Meshtastic, ESPHome, Arduino

Compact ESP32-PICO-D4 development board with integrated 1.14-inch ST7789V IPS LCD (135×240, 260 PPI), WiFi, Bluetooth 4.2/BLE, and Arduino/MicroPython support.

ESP32 development board combining LoRa radio (SX1276/SX1278), u-blox NEO-6M GPS, 0.96" OLED display, and 18650 battery support — the go-to board for Meshtastic and LoRa tracking projects.

Ultra-compact ESP32-S3 board with a 0.85-inch GC9107 IPS display (128×128), 2MB PSRAM, WiFi, BLE 5.0, and USB-C — one of the smallest ESP32-S3 development boards available.

ESP32-S3 development board with 1.9-inch ST7789V TFT display (170×320), optional capacitive touch, 16MB flash, 8MB PSRAM, and USB-C. Popular for smart displays and IoT dashboards.

ESP32 board with SIMCom SIM7000G multi-band LTE-M/NB-IoT modem, GPS, 8MB PSRAM, USB-C, and 18650 battery support — designed for global cellular IoT deployments.

Programmable ESP32 smartwatch with 1.54-inch touch IPS display, BMA423 accelerometer, PCF8563 RTC, PDM microphone, speaker, IR transmitter, and vibration motor — fully open-source and Arduino/MicroPyt

Open-source ESP32-S3 device that detects FAA Remote ID drone broadcasts and BLE devices, reporting alerts over the Meshtastic LoRa mesh network. Uses XIAO ESP32-S3 + Heltec V3.

ESP32-S3 board with 1.91-inch RM67162 AMOLED display (240×536), optional touch, 16MB flash, 8MB PSRAM, and USB-C — delivering vivid OLED visuals for IoT dashboards and smart displays.

ESP32 board with SIM800L 2G GSM/GPRS modem for SMS alerts, voice calls, and cellular data — ideal for remote monitoring and IoT projects needing cellular fallback on a budget.

Dual-MCU board combining RP2040 and ESP32-C3, with a 1.14-inch ST7789V display, WiFi, BLE 5.0, and Arduino/MicroPython support — bringing Raspberry Pi Pico connectivity to wireless IoT projects.

ESP32-S3 USB-A dongle with a 0.96-inch ST7735 color display (80×160), 16MB flash, WiFi, and BLE 5.0 — a compact plug-in development stick for IoT, media, and wireless sensor nodes.

LILYGO T-Micro32 Plus is an upgraded compact ESP32 module with 8MB flash, 2MB PSRAM, expanded GPIO, and an improved RED C3 ceramic antenna for stronger wireless performance.

ESP32-S3 all-in-one media board with 1.9-inch TFT display, rotary encoder, dual microphones, 1W speaker, 7 RGB LEDs, GROVE connector, and LiPo battery support — ideal for audio players and interactive

ESP32-S3 board with a circular 2.1\" or 2.8\" ST7701S RGB display (480×480) and capacitive touch — perfect for smart home controllers, round-display clocks, and interactive dashboards.

nRF52840 + SX1262 LoRa + L76K GPS all-in-one board with 1.54-inch e-paper display, 850mAh battery, Thread, Zigbee, and BLE 5.0 — runs Meshtastic, SoftRF, and custom NRF firmware out of the box.

ESP32 board with LAN8720 10/100 Mbps Ethernet, Power-over-Ethernet (PoE 36–57V), WiFi, and BLE 4.2 — ideal for wired IoT gateways, industrial automation, and network-connected data loggers.

ESP32-S3 handheld terminal with 2.8-inch IPS display, mini QWERTY keyboard, trackball, optional SX1262 LoRa, speaker, and microphone — a self-contained portable communicator running Meshtastic and Mes

ESP32-S3 HMI development board with a 2.8-inch resistive touchscreen, GROVE connectors, 16MB flash, 8MB PSRAM, and USB-C — designed for industrial HMI panels and interactive control interfaces.

Compact ESP32-S3 development board with wired Ethernet (W5500 SPI), WiFi, BLE, microSD slot, and optional PoE and camera shields for reliable networked IoT edge nodes.

LILYGO T-Lora Dual is a compact board featuring dual LR1121 multi-band LoRa radios supporting both sub-GHz and 2.4 GHz bands, with ExpressLRS support for long-range RC and telemetry applications.

Premium ESP32-S3 smartwatch development platform with 2.06" AMOLED touchscreen, LoRa SX1262, GNSS, NFC, MAX98357A audio, DRV2605 haptic, AXP2101 PMIC, and 1100mAh battery.

Wearable ESP32-S3 development board with 1.1" full-color AMOLED display in a glasses prism form factor, microphone, RTC, and touch button for head-up display applications.

ESP32-S3 development board with WiFi HaLow (802.11ah) sub-GHz radio for long-range IoT deployments, plus standard 2.4GHz WiFi, BLE 5.0, microSD, and 18650 battery support.

Upgraded T-Display S3 with a larger 2.33" IPS touchscreen, ESP32-S3R8, OTG charging via SY6970, QWIIC ports, ambient light/proximity sensor, and optional camera module expansion via POGOpin.

ESP32-S3 development board with a 1.64" ICNA3311 AMOLED display at 280×456 resolution, 16MB Flash, 8MB PSRAM, Wi-Fi and Bluetooth 5 LE connectivity.

Upgraded T-Beam with ESP32-S3FN8, QMI8658 6-axis IMU, LoRa SX1262, dual GPS options (L76K or u-blox), SoftRF firmware support, and multi-frequency bands for Meshtastic and aircraft tracking.

Compact LoRa pager with ESP32-S3, 2.33" touchscreen, QWERTY keyboard, u-blox GNSS, BHI260AP AI IMU, ES8311 audio codec, RFID/NFC, and foldable antenna for off-grid messaging.

ESP32-S3 smartwatch dev board with LoRa SX1262, GNSS, BMA423 accelerometer, MAX98357A audio, DRV2605 haptic feedback, AXP2101 PMIC, and 940mAh battery for wearable LoRa projects.

Enhanced ESP32-S3 AMOLED development board with 1.91" RM67162 display, onboard RTC, PMU, SD card slot, capacitive touch, metal shielding, and external FPC antenna.

ESP32-S3 keyboard terminal with 3.1" e-paper touchscreen, LoRa SX1262, GPS, BHI260AP AI IMU, PCM5102A/ES8311 audio, 1400mAh battery, and optional 4G LTE (A7682E) for off-grid terminal applications.

ESP32-S3 multi-protocol RF tool with CC1101 sub-GHz transceiver (300–928 MHz), 13.56 MHz RFID, IR transmit/receive, 1.9" IPS display, and rotary encoder for RF analysis and replay attacks.

Ultra-affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, USB 3.0, QWIIC/Stemma QT connector, power switch, and breadboard-compatible pinout at under $8.

ESP32 development board with integrated CAN bus and RS-485 transceivers, TF card, WiFi, and BLE for industrial IoT, Modbus, and automotive OBD-II applications with 5–12V wide-range power input.

Tiny ESP32-C6 dev board with WiFi 6, BLE 5, Zigbee/Thread (802.15.4), 0.85" 128×128 touchscreen, LiPo battery charging, and breathing LED in a thumbnail-sized form factor.

Compact ESP32-S3 board with a 0.75" round 160×160 TFT LCD (GC9D01N), 16MB flash, 8MB PSRAM, WiFi, and BLE 5 for wearable watchface and circular display applications.

Affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, integrated 18650 battery holder, WiFi, and BLE 5.0 for battery-powered IoT sensor nodes under $10.

Dual-MCU smart panel (ESP32-S3 + ESP32-H2) with 4" 480×480 IPS LCD (ST7701S), WiFi, BLE, native Zigbee/Thread/Matter via H2 co-processor, and optional RS485/CAN FD expansion for wall-mounted smart hom

ESP32-S3 LoRa development board with 0.96" OLED display, multiple LoRa module options (SX1262/SX1276/SX1280/LR1121), WiFi, BLE, and 18650 battery support for Meshtastic and IoT applications.

ESP32-WROVER-E development board with SIM7070G NB-IoT/LTE-M/GPRS modem, GPS, Wi-Fi, Bluetooth 4.2, MicroSD, and solar charging input for ultra-low-power IoT applications.

Compact ESP32-S3 development board featuring a 1.47" RM67162 AMOLED display with QSPI interface, 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and battery charging support.

LILYGO T5 V2.3.1 is a 2.13-inch e-paper display module with SSD1680 driver, supporting 212×104 black-and-white output via SPI. Ultra-low power design retains the image without any power supply.

Compact ESP32 development board combining a physical keyboard with a 1.14" IPS display, USB-C charging, multiple interfaces, and optional 2800mAh battery in shell configuration.

LILYGO T5s is an ESP32 development board with a 2.7-inch 264×176 e-paper display, onboard I2S audio (MAX98357A amplifier + ICS43434 MEMS mic), 500mA battery management, and TF card support.

LILYGO T8-C3 is a compact ESP32-C3 development board featuring Wi-Fi, BLE 5.0, 4MB flash, TF card slot, and USB Type-C, requiring the T-U2T adapter for programming.

LILYGO T-FPGA is a development board combining an ESP32-S3 microcontroller with a Gowin GW1NSR-4C FPGA chip, enabling flexible hardware logic design alongside Wi-Fi and Bluetooth connectivity.

Advanced ESP32-S3 programmable keyboard board with 4 built-in 0.85" TFT displays, 14 RGB LEDs, rotary encoder, STM32 co-processor, magnetic connectors for daisy-chaining up to 6 units.

LILYGO T-Lora C6 is a compact LoRa development board combining the ESP32-C6 module with SX1262 radio, supporting Wi-Fi 6, Bluetooth 5 LE, Zigbee, Thread, and sub-GHz LoRa communication.

LILYGO T-OI Plus is a compact ESP32-C3 development board with Wi-Fi, BLE 5.0, Grove connectors, and optional 16340 battery holder, designed to fit Sonoff BASICR2 enclosures.

ESP32-S3 development board with an elongated 3.4" capacitive touch TFT LCD (180×640 resolution), 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and optional enclosure variant.

LILYGO T5 2.13inch E-Paper is an ESP32-D0WDQ6 V3 development board with a 2.13-inch 212×104 e-ink display supporting 4-level grayscale, 4MB flash, TF card slot, and battery management with 4 user butt

ESP32-based development board with SIM7600E-H 4G LTE Cat-4 modem, GPS, Wi-Fi, Bluetooth, 18650 battery holder with solar charging, and dual USB-C ports for high-speed IoT connectivity.

LILYGO T-Radar is a radar sensor expansion module based on the Acconeer A121 pulsed coherent radar, designed for presence detection and distance measurement with LILYGO motherboards.

ESP32 development board with 4 onboard HRS4H-S-DC5V relays, 4MB flash, 8MB PSRAM, WiFi, BLE 4.2, and optocoupler-isolated GPIO expansion — designed for wireless remote switch control of AC/DC loads.

Enhanced T-Echo with nRF52840, SX1262 LoRa, L76K GPS, BHI260AP IMU, 2400mAh battery, 1.54-inch e-paper display, vibration motor, buzzer, and 1/4-inch mount — Meshtastic-ready with extended runtime.

LILYGO T-01C3 is an ultra-compact ESP32-C3 RISC-V module with Wi-Fi and BLE 5.0, available with or without pre-soldered pins, featuring 5.33µA deep sleep current.

Compact ESP32-C3 keyboard terminal with a built-in 0.99" display, Wi-Fi, Bluetooth 4.2, 400mAh battery, and a 3D-printed shell for portable wireless input applications.

LILYGO T-Wrist E-Paper is an ESP32-based wearable development board with a 1.54-inch 200×200 e-paper display, vibration motor, optional GPS (LG77 GNSS), WiFi, Bluetooth 4.2, and 3D-printable watch she

ESP32 development board with VGA video output, dual PS/2 ports for keyboard and mouse, 4MB flash, and the FabGL graphics library — a retro computing platform for VGA terminal emulators and classic gam

Open-source dual-MCU access point for wirelessly managing e-paper tags. ESP32-C6 handles WiFi connectivity while ESP32-S3 serves as a 2.4GHz RF transceiver for IEEE 802.15.4 communication with electro

ESP32 development board combining 4-channel HX711 load cell amplifiers with LoRa SX1262 radio (868/915 MHz) for wireless weight measurement and IoT scale applications over long-range LoRa networks.

Simplified T-Echo with nRF52840, SX1262 LoRa, and optional L76K GPS — a low-cost, low-power LoRa node and Meshtastic-compatible board for off-grid mesh networking.

ESP32-WROVER-E development board with A7670E LTE Cat-1 modem supporting voice calls, SMS, and GPS positioning. Available with multiple regional frequency variants for global 4G deployments.

LILYGO T-Micro32 V2.0 is a 45%-smaller ESP32 PICO-D4 module with integrated IPEX antenna connector, designed for space-constrained embedded product designs.

LILYGO T-Mini E-Paper S3 is a compact ESP32-S3 board with a 1.02-inch 128×80 e-paper display, 4MB flash, 2MB PSRAM, WiFi, BLE 5, TF card slot, and support for 18350 battery. Available in 868MHz and 91

LILYGO T4 is an ESP32 development board with 8MB PSRAM, optional 2.2 or 2.4-inch ILI9341 TFT LCD display, Wi-Fi, Bluetooth 4.2 BLE, and Li-Po battery support.

ESP32-S3 camera development board with mPCIe slot for LILYGO T-PCIE SIM cellular modules, supporting OV2640 or OV5640 cameras, 16MB flash, 8MB PSRAM, TF card, and I2S microphone for connected vision a

ESP32-S3 smart rotary encoder knob with 1.2-inch round AMOLED display, capacitive touch, buzzer, vibration motor, and dual Qwiic connectors — ideal for smart home control and media interfaces.

LILYGO T-Micro32 S3 is an ultra-compact ESP32-S3FH4R2 module with Wi-Fi, BLE 5.0, 4MB flash, 2MB PSRAM, and dual-core Xtensa LX7 processor in a minimal footprint.

ESP32-WROVER-E development board with A7608E-H LTE Cat-1 modem supporting voice, SMS, GPS, and multi-band LTE-FDD/TDD connectivity for Europe with 18650 battery support.

LILYGO T-TWR Rev2.1 is an ESP32-S3 based programmable walkie-talkie board featuring the SA868 UHF/VHF radio module, GPS, OLED display, and battery support for amateur radio applications.

ESP32 development board with LAN8720 Ethernet, 16MB flash, 8MB PSRAM, WS2812 RGB LED, SIM/TF card slots, and T-PCIE expansion support for industrial IoT, wired networking, and CAN bus applications.

LILYGO T3 S3 E-Paper is an ESP32-S3 LoRa development board with a 2.13-inch 250×122 e-paper display (DEPG0213BN), 4MB flash, 2MB PSRAM, WiFi, BLE 5, SX1262 LoRa transceiver, and LiPo battery support.

ESP32-WROVER development board with 0.96-inch OLED display, five-way directional button, single 18650 battery holder, 8MB PSRAM, WiFi, and BLE 4.2 — a compact handheld IoT controller in a slim form fa

ESP32-S3 industrial communication board with three RS485 ports and one CAN bus — enables multi-protocol data switching for automation, sensor networks, and legacy equipment integration.

ESP32-S3 camera development board with 8MB PSRAM, 16MB Flash, onboard microphone, MAX98357A I2S amplifier, speaker output, and choice of OV2640 or OV5640 camera sensor for audio-visual IoT application

LILYGO LoRa3 (T3 LoRa32 V1.6.1) is an ESP32 development board combining Wi-Fi, BLE, and LoRa radio (SX1276/SX1278) with OLED display and TF card slot for IoT and mesh networking.

Programmable ESP32 smartwatch with 1.3-inch round GC9A01 IPS touchscreen (240×240), BMA423 accelerometer, vibration motor, RTC, WiFi, and BLE 4.2 — open-source and fully programmable with Arduino or M

ESP32-S3-based development board with SIM7670G LTE Cat-1 modem, integrated GPS, Wi-Fi, Bluetooth 5, MicroSD, solar charging input, and 16 MB flash for high-performance IoT and asset tracking applicati

Compact ESP32-PICO-D4 camera board with OV2640 2MP sensor, 0.91-inch SSD1306 OLED display, fisheye or normal lens options, WiFi, BLE, and LiPo battery support — a minimal wireless camera module for Io

LILYGO T-MixRF is a multi-protocol RF development board combining SX1262 LoRa sub-GHz radio with CC1101 FSK/OOK transceiver for versatile wireless protocol support and RF experimentation.

Open-source voltage glitching tool for hardware security research, based on Raspberry Pi Pico 2 (RP2350) with dual high-power MOSFETs, 4 selectable voltage levels, and adjustable Schmitt trigger input

Compact ESP32 development board (Mini32 form factor) with 4MB Flash, WiFi 802.11 b/g/n, Bluetooth 4.2, CH340C USB-to-serial, TP4054 LiPo charger, and 1.25mm JST battery connector — a classic breadboar

LILYGO T5 E-Paper S3 Pro is an ESP32-S3 board with a 4.7-inch 16-greyscale e-paper display, SX1262 LoRa, touch input, RTC, BQ25896/BQ27220 battery management, 16MB flash, 8MB PSRAM, and optional GPS.

High-performance ESP32-P4 development board with dual-core 360MHz RISC-V, 4.1" AMOLED or 4.05" TFT touchscreen, 2MP camera, SX1262 LoRa, GPS, 9-axis IMU, and ESP32-C6 for Wi-Fi 6 and Bluetooth 5.

ESP32-S3 three-board stack with SX1262 LoRa, CAN, RS485, RS232, Ethernet (W5500), relay, capacitive touch LCD, and DC input — a versatile industrial IoT gateway with long-range wireless.

Compact ESP32-S2-WROOM module-based development board with 4MB Flash, 320KB SRAM, native USB OTG, WiFi 802.11 b/g/n, onboard LiPo charging, and BOOT/RESET buttons for USB HID and IoT prototyping.

ESP32-S3R8 development board with a 1.1-inch JD9613 AMOLED display (126×294), onboard trackball, 16MB flash, 8MB PSRAM, WiFi, and BLE 5 — a compact touchless navigation dev kit for creative UI and int

LILYGO LoRa V1.3 is an ESP32 development board with SX1276 LoRa radio at 868/915 MHz, optional 0.96-inch OLED display, Wi-Fi, BLE, and 4MB flash for IoT and LoRa applications.

Updated ESP32 Mini32 development board with 8MB PSRAM, 4/16MB Flash options, dual-core 240MHz, CH9102 USB-serial, WiFi, BLE 4.2, and 1.25mm JST LiPo connector in a 40×31mm breadboard-friendly footprin

AI-capable development board powered by KENDRYTE K230 dual-core 64-bit RISC-V SoC running at 1.6GHz with KPU neural network accelerator, 4.1" AMOLED display, and LoRa connectivity in multiple frequenc

LILYGO T-2CAN is an ESP32-S3 development board featuring dual CAN bus interfaces via two TWAI controllers, Wi-Fi, Bluetooth 5 LE, and wide DC input range for automotive and industrial applications.

Compact breakout board for the Bosch BHI260AP AI-powered IMU, featuring a 6-axis accelerometer and gyroscope with an onboard programmable AI neural network co-processor for motion pattern recognition

ESP32 development board with integrated 0.96-inch SSD1306 OLED display, 4MB Flash, 520KB SRAM, WiFi, Bluetooth dual-mode, USB-C, and onboard LiPo battery charging for compact IoT display projects.

ESP32-S3-WROOM-1 development board with MAX13487E RS-485 transceiver, T-PCIE SIM expansion slot, Grove connector, WiFi, and BLE — designed for vending machine control and industrial RS-485 communicati

Breakout module for the InvenSense ICM-20948 9-axis MEMS IMU, combining a 3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer with an onboard Digital Motion Processor for real-time motion

ESP8266 development board with 1.3-inch SH1106 OLED display, 8 digital I/O pins, CH9102 USB-serial, 3.3V operation, WiFi 802.11 b/g/n, and JST 1.25mm LiPo connector — supports ESPHome and Tasmota firm

ESP32-WROVER-E development board with LAN8720 Ethernet, IEEE 802.3 af/at Power over Ethernet (5V@4A, 44–57V input), 16MB flash, 8MB PSRAM, WiFi, BLE 4.2, and expandable LCD interface for wired IoT gat

LILYGO T4 S3 is an ESP32-S3 development board with a 2.41-inch AMOLED touchscreen (450x600), 16MB flash, 8MB PSRAM, microSD slot, Wi-Fi, and Bluetooth 5 LE.

ESP32 + SX1276 LoRa T-Beam variant optimized for the Helium IoT network — with NEO-6M GPS, AXP2101 PMU, and 18650 battery support for portable LoRaWAN network mapping and sensor nodes.

Pure ESP32-S2 development board with 4MB Flash, 8MB SRAM, native USB, WiFi 802.11 b/g/n, onboard LiPo charging, and multiple control buttons — a single-core Xtensa LX7 board for USB-HID and IoT applic

LILYGO T-Beam BPF is an ESP32-S3 LoRa development board variant featuring an onboard Band Pass Filter for improved RF selectivity, designed for the 144–148 MHz amateur radio band with GPS and OLED dis

High-end ESP32-S3 Ethernet development board with W5500 SPI Ethernet, Power-over-Ethernet support, 16MB flash, 8MB PSRAM, and modular LoRa/LTE expansion shield system.

LILYGO T-Beam 1W is an ESP32-S3 LoRa development board featuring a 1-watt LoRa power amplifier for significantly extended transmission range, with GPS support, AXP2101 PMU, and 18650 battery compatibi

ESP32-S3 LoRa development board (hardware revision V1.3) with 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, WiFi, BLE 5.0, and support for SX1262/SX1276/SX1280/LR1121 radio modules at 433/868/915MHz a

Compact USB dongle with ESP32-C5 featuring dual-band WiFi 6 (2.4/5GHz), Bluetooth 5, 802.15.4, 0.96-inch LCD, TF card slot, and 16MB flash — the first LILYGO dongle with WiFi 6 support.

ESP32 LoRa development board with a Temperature Compensated Crystal Oscillator (TCXO) for enhanced LoRa frequency stability, 0.96-inch SSD1306 OLED display, 4MB Flash, WiFi, BLE 4.2, TF card slot, and

ESP32-WROVER-E development board with 8 optocoupler-isolated 5V relay channels (HRS4H-S-DC5V), Wi-Fi, BLE 4.2, 8MB PSRAM, and support for DC 12–24V power input for industrial automation.

LILYGO T3 S3 LR1121 is an ESP32-S3 development board with a Semtech LR1121 multi-band transceiver supporting sub-GHz (830–940 MHz) and 2.4 GHz LoRa, plus a 0.96" OLED display and microSD card slot.

STM32WL55CCU6 LoRa development board with dual Cortex-M4 + M0+ cores, built-in LoRa/FSK/MSK radio at 433/868/915MHz, 0.96-inch SSD1315 OLED, 256KB Flash, 64KB RAM, and open-source Arduino/STM32CubeIDE

ESP32-P4 high-performance board with ESP32-C6 WiFi HaLow (802.11ah), 16MB flash, 8MB PSRAM, H.264 1080P video processing, MIPI-CSI/DSI, and BLE 5 — designed for long-range sub-GHz WiFi IoT application

ESP32-S3 LoRa voice kit with MAX98357A speaker, MSM261S4030HOR microphone, vibration motor, RTC, 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, and SX1262/SX1276/SX1280 radio options — designed for LoR

ESP32-S3 touch-sensitive bar display board with 8MB PSRAM, 16MB Flash, Wi-Fi, and Bluetooth 5, available in LED and AMOLED display variants for building custom HMI panels, smart home controls, and int

Dual-MCU Zigbee development board combining ESP32-C3 (WiFi/BLE) and Telink TLSR8258 (Zigbee/BLE Mesh) — both run simultaneously for bridging Zigbee sensor networks to WiFi/cloud platforms.

ESP32 development board with SIM7600 LTE Cat-4 modem (150Mbps DL), GPS, 18650 battery holder with solar charging interface, and dual USB-C ports for high-speed cellular IoT applications.

OSHWA-certified open-source ultrasound development kit built around the Raspberry Pi Pico (RP2040). Features a 60 Msps 10-bit ADC, AD8331 time-gain amplifier, and three-level bipolar pulser for NDT an

ESP32 development board with SIM800L 2G GSM/GPRS cellular modem, Wi-Fi, Bluetooth 4.2, USB-C charging, and Li-Po battery connector for IoT devices requiring SMS and GPRS data connectivity.

Compact ESP32-PICO-V3-02 board with rotary encoder, WS2812 RGB LED ring, Wi-Fi, BLE 4.2, 8MB flash, and 2MB PSRAM. Ideal for knob-based UI controllers and volume/parameter controls.

Dual-MCU development board combining ESP32 and KENDRYTE K210 RISC-V AI processor with OV2640 camera, 1.54" IPS touchscreen, I2S audio amplifier, motor driver, 6-axis IMU, and Wi-Fi for edge AI and rob

ESP32-S3 e-paper development board with 4.7-inch 540×960 16-grayscale display (EDO47TC1), Wi-Fi, Bluetooth 5.0, PCF8563 RTC, 16MB flash, 8MB PSRAM, and optional capacitive touch overlay.

Open-source flight controller board with RP2350B MCU, 10-DOF sensor suite (gyro, accelerometer, barometer, magnetometer), INA226 battery monitor, microSD with 4-bit SDIO, and DC-DC converter. 50.7x41.

USB-A dongle form factor board with ESP32-S2, 1.14-inch ST7789V IPS LCD, Wi-Fi, OTG, TF card slot, and Grove connector. Predecessor to the T-Dongle S3 series, ideal for portable USB IoT devices.

Enhanced ESP32-S3 handheld with CC1101 sub-GHz radio, nRF24L01 2.4GHz radio, 1.9" IPS LCD, IR transceiver, 16MB flash, 8MB SRAM. Upgraded version of T-Embed CC1101 with added 2.4GHz wireless module.

An ultra-compact Linux SBC powered by Rockchip RK3308B with quad-core Cortex-A35 at 1.3GHz, 512MB DDR3, 8GB eMMC, 100M Ethernet, optional Wi-Fi 6 and PoE, and an integrated audio codec with 8-channel

ESP32-WROVER development board with Decawave DWM1000 UWB module for centimeter-accurate indoor positioning and ranging, featuring a 1.3\" OLED display and LiPo battery charging.

ESP32-S3 dev board with 7" capacitive touch IPS display (800x480), CAN/RS485 interfaces, and battery support. Built for HMI panels, industrial control, and IoT dashboards.

Third-generation M5Stack Core with ESP32-S3 dual-core 240MHz, 2.0\" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, RTC, 5

Ultra-compact ESP32-PICO-D4 development board (24x24mm) with RGB LED, programmable button, IR transmitter, Grove port, and 6 GPIO pins. Supports Arduino, ESP-IDF, UIFlow, and MicroPython.

Compact ESP32-PICO-V3-02 wearable dev board with 1.14" TFT LCD (135x240), 6-axis IMU (MPU6886), IR transmitter, microphone, buzzer, 200mAh battery, Wi-Fi and Bluetooth in a 48x24x13.5mm form factor.

ESP32-based IoT dev kit with 2.0" IPS capacitive touch display, 16MB flash, 8MB PSRAM, built-in mic, speaker, IMU, vibration motor, and 390mAh battery in a compact stackable enclosure.

Credit-card-sized ESP32-S3 handheld computer with 56-key mechanical keyboard, 1.14" IPS display, BMI270 IMU, ES8311 audio codec, 1W speaker, MEMS microphone, IR transmitter, 1750mAh battery, Grove I2C

Ultra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD (128x128), 6-axis IMU, 8MB flash, Wi-Fi, BLE 5.0, USB-C, and Grove port. Ideal for IoT prototyping and embedded UI projects.