# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**221 device listed.**

## LILYGO T5 E-Paper S3 Pro Lite

A pocket-sized ESP32-S3 development board with a 4.7-inch capacitive touchscreen e-paper display (960×540, 16 grayscale), anti-glare glass, warm-toned backlight, MagSafe wireless charging, and comprehensive battery management.

[Details](https://openhardware.directory/devices/lilygo-t5-e-paper-s3-pro-lite) | [Markdown](https://openhardware.directory/devices/lilygo-t5-e-paper-s3-pro-lite/md)

## LILYGO T-Display

Compact ESP32-PICO-D4 development board with integrated 1.14-inch ST7789V IPS LCD (135×240, 260 PPI), WiFi, Bluetooth 4.2/BLE, and Arduino/MicroPython support.

[Details](https://openhardware.directory/devices/lilygo-t-display) | [Markdown](https://openhardware.directory/devices/lilygo-t-display/md)

## LILYGO T-Display S3

ESP32-S3 development board with 1.9-inch ST7789V TFT display (170×320), optional capacitive touch, 16MB flash, 8MB PSRAM, and USB-C. Popular for smart displays and IoT dashboards.

[Details](https://openhardware.directory/devices/lilygo-t-display-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3/md)

## LILYGO T-Watch 2020 V3

Programmable ESP32 smartwatch with 1.54-inch touch IPS display, BMA423 accelerometer, PCF8563 RTC, PDM microphone, speaker, IR transmitter, and vibration motor — fully open-source and Arduino/MicroPython programmable.

[Details](https://openhardware.directory/devices/lilygo-t-watch-2020-v3) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-2020-v3/md)

## LILYGO T-Higrow

ESP32 plant sensor board with capacitive soil moisture, soil fertility, BH1750 light sensor, and DHT11/BME280 temperature/humidity — WiFi-connected smart plant care for gardens and greenhouses.

[Details](https://openhardware.directory/devices/lilygo-t-higrow) | [Markdown](https://openhardware.directory/devices/lilygo-t-higrow/md)

## LILYGO T-QT Pro

Ultra-compact ESP32-S3 board with a 0.85-inch GC9107 IPS display (128×128), 2MB PSRAM, WiFi, BLE 5.0, and USB-C — one of the smallest ESP32-S3 development boards available.

[Details](https://openhardware.directory/devices/lilygo-t-qt-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-qt-pro/md)

## LILYGO T-Display S3 AMOLED

ESP32-S3 board with 1.91-inch RM67162 AMOLED display (240×536), optional touch, 16MB flash, 8MB PSRAM, and USB-C — delivering vivid OLED visuals for IoT dashboards and smart displays.

[Details](https://openhardware.directory/devices/lilygo-t-display-s3-amoled) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3-amoled/md)

## LILYGO T-Call SIM800

ESP32 board with SIM800L 2G GSM/GPRS modem for SMS alerts, voice calls, and cellular data — ideal for remote monitoring and IoT projects needing cellular fallback on a budget.

[Details](https://openhardware.directory/devices/lilygo-t-call-sim800) | [Markdown](https://openhardware.directory/devices/lilygo-t-call-sim800/md)

## LILYGO T-Pico C3

Dual-MCU board combining RP2040 and ESP32-C3, with a 1.14-inch ST7789V display, WiFi, BLE 5.0, and Arduino/MicroPython support — bringing Raspberry Pi Pico connectivity to wireless IoT projects.

[Details](https://openhardware.directory/devices/lilygo-t-pico) | [Markdown](https://openhardware.directory/devices/lilygo-t-pico/md)

## LILYGO T-Dongle S3

ESP32-S3 USB-A dongle with a 0.96-inch ST7735 color display (80×160), 16MB flash, WiFi, and BLE 5.0 — a compact plug-in development stick for IoT, media, and wireless sensor nodes.

[Details](https://openhardware.directory/devices/lilygo-t-dongle-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-dongle-s3/md)

## LILYGO T-Embed

ESP32-S3 all-in-one media board with 1.9-inch TFT display, rotary encoder, dual microphones, 1W speaker, 7 RGB LEDs, GROVE connector, and LiPo battery support — ideal for audio players and interactive IoT devices.

[Details](https://openhardware.directory/devices/lilygo-t-embed) | [Markdown](https://openhardware.directory/devices/lilygo-t-embed/md)

## LILYGO T-RGB

ESP32-S3 board with a circular 2.1\" or 2.8\" ST7701S RGB display (480×480) and capacitive touch — perfect for smart home controllers, round-display clocks, and interactive dashboards.

[Details](https://openhardware.directory/devices/lilygo-t-rgb) | [Markdown](https://openhardware.directory/devices/lilygo-t-rgb/md)

## LILYGO T-Camera S3

ESP32-S3 camera development board with OV2640 2MP sensor, 0.96-inch OLED display, 16MB flash, 8MB PSRAM, WiFi, and BLE 5.0 — a ready-to-use platform for WiFi streaming cameras and computer vision projects.

[Details](https://openhardware.directory/devices/lilygo-t-camera-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-camera-s3/md)

## LILYGO T-Internet-POE

ESP32 board with LAN8720 10/100 Mbps Ethernet, Power-over-Ethernet (PoE 36–57V), WiFi, and BLE 4.2 — ideal for wired IoT gateways, industrial automation, and network-connected data loggers.

[Details](https://openhardware.directory/devices/lilygo-t-internet-poe) | [Markdown](https://openhardware.directory/devices/lilygo-t-internet-poe/md)

## LILYGO T-HMI

ESP32-S3 HMI development board with a 2.8-inch resistive touchscreen, GROVE connectors, 16MB flash, 8MB PSRAM, and USB-C — designed for industrial HMI panels and interactive control interfaces.

[Details](https://openhardware.directory/devices/lilygo-t-hmi) | [Markdown](https://openhardware.directory/devices/lilygo-t-hmi/md)

## LILYGO T-ETH-Lite

Compact ESP32-S3 development board with wired Ethernet (W5500 SPI), WiFi, BLE, microSD slot, and optional PoE and camera shields for reliable networked IoT edge nodes.

[Details](https://openhardware.directory/devices/lilygo-t-eth-lite) | [Markdown](https://openhardware.directory/devices/lilygo-t-eth-lite/md)

## LILYGO T-Glass

Wearable ESP32-S3 development board with 1.1" full-color AMOLED display in a glasses prism form factor, microphone, RTC, and touch button for head-up display applications.

[Details](https://openhardware.directory/devices/lilygo-t-glass) | [Markdown](https://openhardware.directory/devices/lilygo-t-glass/md)

## LILYGO T-Display S3 Pro

Upgraded T-Display S3 with a larger 2.33" IPS touchscreen, ESP32-S3R8, OTG charging via SY6970, QWIIC ports, ambient light/proximity sensor, and optional camera module expansion via POGOpin.

[Details](https://openhardware.directory/devices/lilygo-t-display-s3-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3-pro/md)

## LILYGO T-Watch S3 Plus

ESP32-S3 smartwatch dev board with LoRa SX1262, GNSS, BMA423 accelerometer, MAX98357A audio, DRV2605 haptic feedback, AXP2101 PMIC, and 940mAh battery for wearable LoRa projects.

[Details](https://openhardware.directory/devices/lilygo-t-watch-s3-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-s3-plus/md)

## LILYGO T-Embed CC1101

ESP32-S3 multi-protocol RF tool with CC1101 sub-GHz transceiver (300–928 MHz), 13.56 MHz RFID, IR transmit/receive, 1.9" IPS display, and rotary encoder for RF analysis and replay attacks.

[Details](https://openhardware.directory/devices/lilygo-t-embed-cc1101) | [Markdown](https://openhardware.directory/devices/lilygo-t-embed-cc1101/md)

## LILYGO T7 S3

Ultra-affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, USB 3.0, QWIIC/Stemma QT connector, power switch, and breadboard-compatible pinout at under $8.

[Details](https://openhardware.directory/devices/lilygo-t7-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t7-s3/md)

## LILYGO T-CAN485

ESP32 development board with integrated CAN bus and RS-485 transceivers, TF card, WiFi, and BLE for industrial IoT, Modbus, and automotive OBD-II applications with 5–12V wide-range power input.

[Details](https://openhardware.directory/devices/lilygo-t-can485) | [Markdown](https://openhardware.directory/devices/lilygo-t-can485/md)

## LILYGO T-QT C6

Tiny ESP32-C6 dev board with WiFi 6, BLE 5, Zigbee/Thread (802.15.4), 0.85" 128×128 touchscreen, LiPo battery charging, and breathing LED in a thumbnail-sized form factor.

[Details](https://openhardware.directory/devices/lilygo-t-qt-c6) | [Markdown](https://openhardware.directory/devices/lilygo-t-qt-c6/md)

## LILYGO T-Circle S3

Compact ESP32-S3 board with a 0.75" round 160×160 TFT LCD (GC9D01N), 16MB flash, 8MB PSRAM, WiFi, and BLE 5 for wearable watchface and circular display applications.

[Details](https://openhardware.directory/devices/lilygo-t-circle-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-circle-s3/md)

## LILYGO T-Relay S3

ESP32-S3 board with 6 onboard relays, 16MB flash, 8MB PSRAM, WiFi, and BLE for ESPHome smart home automation, controlling lights, appliances, and HVAC systems.

[Details](https://openhardware.directory/devices/lilygo-t-relay-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-relay-s3/md)

## LILYGO T-Energy S3

Affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, integrated 18650 battery holder, WiFi, and BLE 5.0 for battery-powered IoT sensor nodes under $10.

[Details](https://openhardware.directory/devices/lilygo-t-energy-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-energy-s3/md)

## LILYGO T-Knob

Smart rotary encoder controller based on ESP32-C6 with WiFi 6, BLE 5, Zigbee/Thread, 4 RGB LEDs, buzzer, and magnetic Hall-effect knob for wireless volume control and smart home automation.

[Details](https://openhardware.directory/devices/lilygo-t-knob) | [Markdown](https://openhardware.directory/devices/lilygo-t-knob/md)

## LILYGO T-Panel S3

Dual-MCU smart panel (ESP32-S3 + ESP32-H2) with 4" 480×480 IPS LCD (ST7701S), WiFi, BLE, native Zigbee/Thread/Matter via H2 co-processor, and optional RS485/CAN FD expansion for wall-mounted smart home controllers.

[Details](https://openhardware.directory/devices/lilygo-t-panel-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-panel-s3/md)

## LILYGO T-Embed SI4732

ESP32-S3 board with SI4732-A10 AM/FM/SW/LW radio receiver, 1.9" IPS display, 900mAh battery, and rotary encoder for a portable software-defined radio experience.

[Details](https://openhardware.directory/devices/lilygo-t-embed-si4732) | [Markdown](https://openhardware.directory/devices/lilygo-t-embed-si4732/md)

## LILYGO T7-C6

Compact ESP32-C6 development board with WiFi 6, BLE 5, and IEEE 802.15.4 (Zigbee/Thread/Matter) support, featuring 4MB flash and USB-C for next-generation IoT protocols.

[Details](https://openhardware.directory/devices/lilygo-t7-c6) | [Markdown](https://openhardware.directory/devices/lilygo-t7-c6/md)

## LILYGO T-Display Bar

ESP32-S3 development board with a unique wide bar-format display, 16MB flash, 8MB PSRAM, and USB-C for information display and custom UI projects.

[Details](https://openhardware.directory/devices/lilygo-t-display-bar) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-bar/md)

## LILYGO T5 2.13inch E-Paper

LILYGO T5 2.13inch E-Paper is an ESP32-D0WDQ6 V3 development board with a 2.13-inch 212×104 e-ink display supporting 4-level grayscale, 4MB flash, TF card slot, and battery management with 4 user buttons.

[Details](https://openhardware.directory/devices/lilygo-t5-2-13inch-e-paper) | [Markdown](https://openhardware.directory/devices/lilygo-t5-2-13inch-e-paper/md)

## LILYGO T-01C3

LILYGO T-01C3 is an ultra-compact ESP32-C3 RISC-V module with Wi-Fi and BLE 5.0, available with or without pre-soldered pins, featuring 5.33µA deep sleep current.

[Details](https://openhardware.directory/devices/lilygo-t-01c3) | [Markdown](https://openhardware.directory/devices/lilygo-t-01c3/md)

## LILYGO T-Wrist E-Paper

LILYGO T-Wrist E-Paper is an ESP32-based wearable development board with a 1.54-inch 200×200 e-paper display, vibration motor, optional GPS (LG77 GNSS), WiFi, Bluetooth 4.2, and 3D-printable watch shell.

[Details](https://openhardware.directory/devices/lilygo-t-wrist-e-paper) | [Markdown](https://openhardware.directory/devices/lilygo-t-wrist-e-paper/md)

## LILYGO T-Mini E-Paper S3

LILYGO T-Mini E-Paper S3 is a compact ESP32-S3 board with a 1.02-inch 128×80 e-paper display, 4MB flash, 2MB PSRAM, WiFi, BLE 5, TF card slot, and support for 18350 battery. Available in 868MHz and 915MHz variants.

[Details](https://openhardware.directory/devices/lilygo-t-mini-epaper-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-mini-epaper-s3/md)

## LILYGO T-Micro32 S3

LILYGO T-Micro32 S3 is an ultra-compact ESP32-S3FH4R2 module with Wi-Fi, BLE 5.0, 4MB flash, 2MB PSRAM, and dual-core Xtensa LX7 processor in a minimal footprint.

[Details](https://openhardware.directory/devices/lilygo-t-micro32-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-micro32-s3/md)

## LILYGO T7 V1.3 Mini32 ESP32

Compact ESP32 development board (Mini32 form factor) with 4MB Flash, WiFi 802.11 b/g/n, Bluetooth 4.2, CH340C USB-to-serial, TP4054 LiPo charger, and 1.25mm JST battery connector — a classic breadboard-compatible IoT dev board.

[Details](https://openhardware.directory/devices/lilygo-t7-v1-3-mini-32-esp32) | [Markdown](https://openhardware.directory/devices/lilygo-t7-v1-3-mini-32-esp32/md)

## LILYGO T-Track

ESP32-S3R8 development board with a 1.1-inch JD9613 AMOLED display (126×294), onboard trackball, 16MB flash, 8MB PSRAM, WiFi, and BLE 5 — a compact touchless navigation dev kit for creative UI and interactive IoT applications.

[Details](https://openhardware.directory/devices/lilygo-t-track) | [Markdown](https://openhardware.directory/devices/lilygo-t-track/md)

## LILYGO T7 Mini32 V1.5

Updated ESP32 Mini32 development board with 8MB PSRAM, 4/16MB Flash options, dual-core 240MHz, CH9102 USB-serial, WiFi, BLE 4.2, and 1.25mm JST LiPo connector in a 40×31mm breadboard-friendly footprint.

[Details](https://openhardware.directory/devices/lilygo-t7-mini32-v1-5) | [Markdown](https://openhardware.directory/devices/lilygo-t7-mini32-v1-5/md)

## LILYGO ESP32 OLED V3.0

ESP32 development board with integrated 0.96-inch SSD1306 OLED display, 4MB Flash, 520KB SRAM, WiFi, Bluetooth dual-mode, USB-C, and onboard LiPo battery charging for compact IoT display projects.

[Details](https://openhardware.directory/devices/lilygo-esp32-oled-v3-0) | [Markdown](https://openhardware.directory/devices/lilygo-esp32-oled-v3-0/md)

## LILYGO T-Vending

ESP32-S3-WROOM-1 development board with MAX13487E RS-485 transceiver, T-PCIE SIM expansion slot, Grove connector, WiFi, and BLE — designed for vending machine control and industrial RS-485 communication applications.

[Details](https://openhardware.directory/devices/lilygo-t-vending) | [Markdown](https://openhardware.directory/devices/lilygo-t-vending/md)

## LILYGO T-PoE Pro

ESP32-WROVER-E development board with LAN8720 Ethernet, IEEE 802.3 af/at Power over Ethernet (5V@4A, 44–57V input), 16MB flash, 8MB PSRAM, WiFi, BLE 4.2, and expandable LCD interface for wired IoT gateway applications.

[Details](https://openhardware.directory/devices/lilygo-t-poe-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-poe-pro/md)

## LILYGO T4 S3

LILYGO T4 S3 is an ESP32-S3 development board with a 2.41-inch AMOLED touchscreen (450x600), 16MB flash, 8MB PSRAM, microSD slot, Wi-Fi, and Bluetooth 5 LE.

[Details](https://openhardware.directory/devices/lilygo-t4-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t4-s3/md)

## LILYGO ESP32-S2

Pure ESP32-S2 development board with 4MB Flash, 8MB SRAM, native USB, WiFi 802.11 b/g/n, onboard LiPo charging, and multiple control buttons — a single-core Xtensa LX7 board for USB-HID and IoT applications.

[Details](https://openhardware.directory/devices/lilygo-esp32-s2) | [Markdown](https://openhardware.directory/devices/lilygo-esp32-s2/md)

## LILYGO ESP32-S2 WOOR

Compact ESP32-S2-WROOM module-based development board with 4MB Flash, 320KB SRAM, native USB OTG, WiFi 802.11 b/g/n, onboard LiPo charging, and BOOT/RESET buttons for USB HID and IoT prototyping.

[Details](https://openhardware.directory/devices/lilygo-esp32-s2-woor) | [Markdown](https://openhardware.directory/devices/lilygo-esp32-s2-woor/md)

## LILYGO T-Touch Bar

ESP32-S3 touch-sensitive bar display board with 8MB PSRAM, 16MB Flash, Wi-Fi, and Bluetooth 5, available in LED and AMOLED display variants for building custom HMI panels, smart home controls, and interactive displays.

[Details](https://openhardware.directory/devices/lilygo-t-touch-bar) | [Markdown](https://openhardware.directory/devices/lilygo-t-touch-bar/md)

## LILYGO T-RS S3

ESP32-S3 industrial communication board with isolated RS-232 and RS-485 modules (3000V isolation), 7–24V DC input via DB9 connector, Wi-Fi, and Bluetooth 5 LE for Modbus and industrial serial networking applications.

[Details](https://openhardware.directory/devices/lilygo-t-rs-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-rs-s3/md)

## LILYGO T-Bao

Dual-MCU development board combining ESP32 and KENDRYTE K210 RISC-V AI processor with OV2640 camera, 1.54" IPS touchscreen, I2S audio amplifier, motor driver, 6-axis IMU, and Wi-Fi for edge AI and robotics prototyping.

[Details](https://openhardware.directory/devices/lilygo-t-bao) | [Markdown](https://openhardware.directory/devices/lilygo-t-bao/md)

## M5Stack CoreS3

Third-generation M5Stack Core with ESP32-S3 dual-core 240MHz, 2.0\" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, RTC, 500mAh battery, and DinBase for mounting.

[Details](https://openhardware.directory/devices/m5stack-cores3) | [Markdown](https://openhardware.directory/devices/m5stack-cores3/md)

## M5StickC Plus 2

Compact ESP32-PICO-V3-02 wearable dev board with 1.14" TFT LCD (135x240), 6-axis IMU (MPU6886), IR transmitter, microphone, buzzer, 200mAh battery, Wi-Fi and Bluetooth in a 48x24x13.5mm form factor.

[Details](https://openhardware.directory/devices/m5stickc-plus-2) | [Markdown](https://openhardware.directory/devices/m5stickc-plus-2/md)

## M5Stack Core2

ESP32-based IoT dev kit with 2.0" IPS capacitive touch display, 16MB flash, 8MB PSRAM, built-in mic, speaker, IMU, vibration motor, and 390mAh battery in a compact stackable enclosure.

[Details](https://openhardware.directory/devices/m5stack-core2) | [Markdown](https://openhardware.directory/devices/m5stack-core2/md)

## M5Stack AtomS3

Ultra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD (128x128), 6-axis IMU, 8MB flash, Wi-Fi, BLE 5.0, USB-C, and Grove port. Ideal for IoT prototyping and embedded UI projects.

[Details](https://openhardware.directory/devices/m5stack-atoms3) | [Markdown](https://openhardware.directory/devices/m5stack-atoms3/md)

## M5Stack Dial

ESP32-S3 smart rotary knob with 1.28" round GC9A01 touch display (240x240), rotary encoder, RFID reader (WS1850S), RTC (BM8563), buzzer, and 2 Grove ports for IoT control interfaces.

[Details](https://openhardware.directory/devices/m5stack-dial) | [Markdown](https://openhardware.directory/devices/m5stack-dial/md)

## SenseCAP Indicator D1

Dual-MCU IoT development platform featuring ESP32-S3 and RP2040 processors with a 4-inch capacitive touchscreen, WiFi, BLE, optional LoRa, and multiple Grove sensor connectors for IoT prototyping.

[Details](https://openhardware.directory/devices/sensecap-indicator-d1) | [Markdown](https://openhardware.directory/devices/sensecap-indicator-d1/md)

## M5Stack Atom Echo

Ultra-compact ESP32-PICO smart speaker dev kit (24x24mm) with built-in microphone, speaker, RGB LED, button, and Grove port. Ideal for voice assistant and audio streaming projects.

[Details](https://openhardware.directory/devices/m5stack-atom-echo) | [Markdown](https://openhardware.directory/devices/m5stack-atom-echo/md)

## Seeed XIAO ESP32S3 Plus

Ultra-compact ESP32-S3 development board with OV2640 camera, digital microphone, 8MB PSRAM, 8MB flash, WiFi 802.11 b/g/n, BLE 5.0, extended GPIO, and battery charging — ideal for AI and IoT edge projects.

[Details](https://openhardware.directory/devices/xiao-esp32s3-plus) | [Markdown](https://openhardware.directory/devices/xiao-esp32s3-plus/md)

## M5Stack NanoC6

Ultra-compact ESP32-C6 dev board by M5Stack with WiFi 6, BLE 5.0, Zigbee 3.0, and Thread/Matter support. RISC-V single-core at 160MHz, USB-C, RGB LED, and button in a tiny form factor.

[Details](https://openhardware.directory/devices/m5stack-nanoc6) | [Markdown](https://openhardware.directory/devices/m5stack-nanoc6/md)

## M5Stack Atom Matrix

Ultra-compact ESP32-PICO dev board (24x24mm) with 5x5 RGB LED matrix, 6-axis IMU (MPU6886), IR LED, programmable button, and Grove port. Perfect for LED displays and motion sensing.

[Details](https://openhardware.directory/devices/m5stack-atom-matrix) | [Markdown](https://openhardware.directory/devices/m5stack-atom-matrix/md)

## M5Stack AtomS3 Lite

Ultra-compact ESP32-S3 dev board (24x24mm) by M5Stack without display. Features WiFi, BLE 5.0, 8MB flash, Grove port, RGB LED, button, and USB-C in a tiny enclosure for IoT and embedded projects.

[Details](https://openhardware.directory/devices/m5stack-atoms3-lite) | [Markdown](https://openhardware.directory/devices/m5stack-atoms3-lite/md)

## DFRobot FireBeetle 2 ESP32-S3 AIoT Camera

ESP32-S3 development board with integrated OV2640 camera, 16MB flash, 8MB PSRAM, WiFi and BLE connectivity. Designed for AIoT applications, computer vision, and edge AI projects.

[Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-s3-aiot-camera) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-s3-aiot-camera/md)

## WT32-SC01 Plus

ESP32-S3 development board with a 3.5" capacitive touch IPS LCD (480x320), 16MB flash, and 8MB PSRAM. Popular for building custom HMI/UI projects with LVGL, smart home panels, and IoT dashboards.

[Details](https://openhardware.directory/devices/wt32-sc01-plus) | [Markdown](https://openhardware.directory/devices/wt32-sc01-plus/md)

## M5Stack Atom Echo S3R

ESP32-S3 smart speaker dev kit with ES7210 audio codec, NS4168 amplifier, dual MEMS microphones, and RGB LED. Designed for Home Assistant voice assistant, ESPHome, and audio streaming projects.

[Details](https://openhardware.directory/devices/m5stack-atom-echo-s3r) | [Markdown](https://openhardware.directory/devices/m5stack-atom-echo-s3r/md)

## ESP32-S3 Nano

Compact ESP32-S3 dev board by Waveshare in Arduino Nano form factor. Features dual-core 240MHz LX7, 16MB flash, 8MB PSRAM, WiFi, BLE 5.0, and USB-C. Drop-in ESP32-S3 upgrade for Nano-sized projects.

[Details](https://openhardware.directory/devices/esp32-s3-nano) | [Markdown](https://openhardware.directory/devices/esp32-s3-nano/md)

## Sonoff BasicR2

WiFi smart switch based on ESP8285, widely used in the open-source home automation community. Easily flashable with Tasmota or ESPHome for local-only smart home control without cloud dependency.

[Details](https://openhardware.directory/devices/sonoff-basicr2) | [Markdown](https://openhardware.directory/devices/sonoff-basicr2/md)

## ESP32 WiFi Fancontroller

ESP32-S2-based WiFi fan controller with 4 independent PWM outputs, integrated HDC1080 temperature and humidity sensor, Qwiic expansion, and native Home Assistant integration via ESPHome.

[Details](https://openhardware.directory/devices/esp32-wifi-fancontroller) | [Markdown](https://openhardware.directory/devices/esp32-wifi-fancontroller/md)

## OpenEPaperLink Access Point C6+S3

Open-source dual-MCU access point for wirelessly managing e-paper tags. ESP32-C6 handles WiFi connectivity while ESP32-S3 serves as a 2.4GHz RF transceiver for IEEE 802.15.4 communication with electronic shelf labels.

[Details](https://openhardware.directory/devices/openepaperlink-access-point-c6-s3) | [Markdown](https://openhardware.directory/devices/openepaperlink-access-point-c6-s3/md)

## Open AIR Mini

Open-source ESP32-based ventilation controller for Ducobox Silent/Focus and Orcon MVS-15xx systems with optional CO2, humidity, VOC, and NOx sensors, fully compatible with ESPHome and Home Assistant.

[Details](https://openhardware.directory/devices/open-air-mini) | [Markdown](https://openhardware.directory/devices/open-air-mini/md)

## Waveshare RoArm-M1

ESP32-based 5-DOF desktop robotic arm with high-torque serial bus servos, WiFi/Bluetooth control, motion recording, inverse kinematics, and ROS 2 support. Carbon fiber and aluminum construction.

[Details](https://openhardware.directory/devices/waveshare-roarm-m1) | [Markdown](https://openhardware.directory/devices/waveshare-roarm-m1/md)

## Raspberry Pi Pico W

Wireless microcontroller board featuring the RP2040 dual-core Cortex-M0+ processor with built-in WiFi 4 and Bluetooth 5.2 (BLE). Supports MicroPython, CircuitPython, and C/C++ development.

[Details](https://openhardware.directory/devices/raspberry-pi-pico-w) | [Markdown](https://openhardware.directory/devices/raspberry-pi-pico-w/md)

## Waveshare RoArm-M2-S

ESP32-based 4-DOF robotic arm with 360-degree base rotation, 500g payload at 300mm reach, dual-drive shoulder joint, 9-axis IMU, and ROS 2 + LeRobot compatibility. Under 850g total weight.

[Details](https://openhardware.directory/devices/waveshare-roarm-m2-s) | [Markdown](https://openhardware.directory/devices/waveshare-roarm-m2-s/md)

## Waveshare UGV Beast

Open-source ROS2 AI robot with tracked chassis, Raspberry Pi 4B/5, ESP32 sub-controller, 5MP camera with pan-tilt, IMU, and support for LiDAR expansion. Programmable via Python, OpenCV, and ROS2.

[Details](https://openhardware.directory/devices/waveshare-ugv-beast) | [Markdown](https://openhardware.directory/devices/waveshare-ugv-beast/md)

## DFRobot Maqueen Plus V3

Advanced micro:bit STEM robot with 8x8 matrix laser ranging, 5 line-tracking sensors with intersection recognition, magnetic encoders, PID control, and 6 RGB LEDs. Programmable via MakeCode and MicroPython.

[Details](https://openhardware.directory/devices/dfrobot-maqueen-plus-v3) | [Markdown](https://openhardware.directory/devices/dfrobot-maqueen-plus-v3/md)

## ACEBOTT QD001 Smart Robot Car

ESP32-powered 4WD mecanum wheel robot car kit with ultrasonic, IR, and line-tracking sensors. Programmable via Arduino, ACECode, and Python. Expandable with camera, AI, tank, robot arm, and GPS packs.

[Details](https://openhardware.directory/devices/acebott-qd001-smart-robot-car) | [Markdown](https://openhardware.directory/devices/acebott-qd001-smart-robot-car/md)

## Raspberry Pi 5

The latest Raspberry Pi single-board computer featuring a BCM2712 quad-core Cortex-A76 processor at 2.4GHz, PCIe 2.0, dual 4K HDMI output, USB 3.0, and available in 2GB, 4GB, 8GB, and 16GB RAM configurations.

[Details](https://openhardware.directory/devices/raspberry-pi-5) | [Markdown](https://openhardware.directory/devices/raspberry-pi-5/md)

## Waveshare GPM280

A portable retro gaming console based on Raspberry Pi Compute Module 3+ Lite with a 2.8-inch IPS display (640x480), 1500mAh battery, Wi-Fi ROM updates, and a compact 136.4x67.5mm form factor.

[Details](https://openhardware.directory/devices/waveshare-gpm280) | [Markdown](https://openhardware.directory/devices/waveshare-gpm280/md)

## DFRobot Maixduino AI Development Kit

RISC-V AI development board combining the Kendryte K210 AI processor with ESP32 for WiFi/BT connectivity. Includes camera and microphone for computer vision and voice recognition applications.

[Details](https://openhardware.directory/devices/dfrobot-maixduino) | [Markdown](https://openhardware.directory/devices/dfrobot-maixduino/md)

## Seeed XIAO 2-Channel WiFi AC Relay

ESP32-C6 based 2-channel AC relay module with WiFi 6, Zigbee 3.0, and Thread support. Compact relay board compatible with Arduino and ESPHome for smart home AC switching up to 10A per channel.

[Details](https://openhardware.directory/devices/seeed-xiao-2-channel-wifi-ac-relay) | [Markdown](https://openhardware.directory/devices/seeed-xiao-2-channel-wifi-ac-relay/md)

## M5Stack Single Live Wire WiFi Smart Switch

ESP32-C6 based WiFi smart switch for single live wire AC power control. Supports WiFi 6 and Zigbee 3.0, fits standard wall boxes for home automation.

[Details](https://openhardware.directory/devices/m5stack-wifi-smart-switch) | [Markdown](https://openhardware.directory/devices/m5stack-wifi-smart-switch/md)

## ESP8266 ESP-01S WiFi Module

Compact ESP8266-based WiFi dev board with 1MB flash, 2 GPIO pins, and 802.11 b/g/n. Runs Arduino, MicroPython, ESPHome, and Tasmota firmware for smart home and IoT projects.

[Details](https://openhardware.directory/devices/esp8266-esp-01s) | [Markdown](https://openhardware.directory/devices/esp8266-esp-01s/md)

## M5Stack Air Quality Kit v1.1

ESP32-S3 based air quality monitor with SEN55 particulate/VOC sensor, SCD40 CO2 sensor, 1.54" e-ink display, 600mAh battery, and Grove connector.

[Details](https://openhardware.directory/devices/m5stack-air-quality-kit) | [Markdown](https://openhardware.directory/devices/m5stack-air-quality-kit/md)

## M5Stack UnitV2 AI Camera

Linux-based standalone AI camera with SigmaStar SSD202D dual-core Cortex-A7, GC4653 4MP sensor, 128MB RAM, WiFi, and USB-C. Runs Python and V-Training for edge AI.

[Details](https://openhardware.directory/devices/m5stack-unitv2-ai-camera) | [Markdown](https://openhardware.directory/devices/m5stack-unitv2-ai-camera/md)

## WiFi Devboard for Flipper Zero

ESP32-S2-based WiFi development board for Flipper Zero enabling wireless firmware updates, Black Magic Probe debugging over USB and WiFi, and WiFi pentesting with PMKID capture and deauth capabilities.

[Details](https://openhardware.directory/devices/flipper-zero-wifi-devboard) | [Markdown](https://openhardware.directory/devices/flipper-zero-wifi-devboard/md)

## Flipper Zero

Portable open-source multi-tool for hardware exploration, combining Sub-GHz, NFC, RFID 125kHz, infrared, iButton, BLE, and GPIO in a pocket-sized device with a 1.4" monochrome LCD.

[Details](https://openhardware.directory/devices/flipper-zero) | [Markdown](https://openhardware.directory/devices/flipper-zero/md)

## Bee Data Logger

ESP32-S3 based data logging board with DS3231 RTC, microSD card slot, dual STEMMA/Qwiic connectors, and LiPo charging. Achieves ~21µA deep sleep current. Open source hardware with Arduino and CircuitPython support.

[Details](https://openhardware.directory/devices/bee-data-logger) | [Markdown](https://openhardware.directory/devices/bee-data-logger/md)

## UkieLab WiFi Weather Station 7.5"

A smart WiFi-enabled weather station with a 7.5\" e-ink display showing current conditions, humidity, pressure, and 4-day forecasts via Apple Weather. Available in USB-powered or battery-powered versions with optional CO2 sensor.

[Details](https://openhardware.directory/devices/ukielab-wifi-weather-station-75) | [Markdown](https://openhardware.directory/devices/ukielab-wifi-weather-station-75/md)

## Makerfabs ESP32 UWB Pro with Display

ESP32-WROVER development board with Decawave DWM1000 UWB module for centimeter-accurate indoor positioning and ranging, featuring a 1.3\" OLED display and LiPo battery charging.

[Details](https://openhardware.directory/devices/makerfabs-esp32-uwb-pro-with-display) | [Markdown](https://openhardware.directory/devices/makerfabs-esp32-uwb-pro-with-display/md)

## Evil Crow RF V2

Open-source RF security research tool with ESP32, dual CC1101 sub-GHz transceivers (300-928MHz), and NRF24L01 2.4GHz module for penetration testing, signal analysis, and replay attacks.

[Details](https://openhardware.directory/devices/evil-crow-rf-v2) | [Markdown](https://openhardware.directory/devices/evil-crow-rf-v2/md)

## Airlytix ES1

ESPHome-native indoor air quality sensor with PM1.0/PM2.5/PM4/PM10, CO2, VOC, NOx, temperature, humidity, pressure, light, and sound monitoring. Designed for Home Assistant with full local control and open YAML configuration.

[Details](https://openhardware.directory/devices/airlytix-es1) | [Markdown](https://openhardware.directory/devices/airlytix-es1/md)

## HeishaMon Communication PCB

Open-source ESP-based communication PCB for local monitoring and control of Panasonic Aquarea heat pumps via MQTT and HTTP, with Home Assistant integration and S0 energy metering support.

[Details](https://openhardware.directory/devices/heishamon-communication-pcb) | [Markdown](https://openhardware.directory/devices/heishamon-communication-pcb/md)

## Armachat FLIP

Pocket-sized open-source LoRa mesh messenger with ESP32-S3, RFM95 radio, 2.8" IPS display, and 36-key QWERTY keyboard. Runs Meshtastic and CircuitPython firmware for off-grid text communication.

[Details](https://openhardware.directory/devices/armachat-flip) | [Markdown](https://openhardware.directory/devices/armachat-flip/md)

## CircuitMess ClockStar 2.0

DIY smartwatch kit powered by ESP32 with ST7735S display, 6-axis IMU, Bluetooth connectivity, and programmable via CircuitBlocks visual coding environment.

[Details](https://openhardware.directory/devices/circuitmess-clockstar-2-0) | [Markdown](https://openhardware.directory/devices/circuitmess-clockstar-2-0/md)

## CircuitMess NASA Artemis Watch 2.0

NASA-themed programmable smartwatch powered by ESP32-S3 with BLE 5.0, 6-axis IMU, ST7735S display, and activity tracking. Pre-assembled and ready to code.

[Details](https://openhardware.directory/devices/circuitmess-nasa-artemis-watch-2-0) | [Markdown](https://openhardware.directory/devices/circuitmess-nasa-artemis-watch-2-0/md)

## CircuitMess Chatter 2.0

DIY encrypted LoRa communicator kit building a pair of devices for off-grid text messaging up to 2km range. Features ESP32, LLCC68 LoRa radio, and 160×128 TFT display.

[Details](https://openhardware.directory/devices/circuitmess-chatter-2-0) | [Markdown](https://openhardware.directory/devices/circuitmess-chatter-2-0/md)

## CircuitMess ByteBoi 2.0

DIY retro game console kit powered by ESP32 with TFT color display, speaker, microSD card slot, and RGB LED. Build it, play pre-loaded games, then code your own.

[Details](https://openhardware.directory/devices/circuitmess-byteboi-2-0) | [Markdown](https://openhardware.directory/devices/circuitmess-byteboi-2-0/md)

## CircuitMess NASA Mars Perseverance Rover

NASA-themed DIY robotics kit with ESP32-S3, camera, dual DC motors, 3 servos, and WiFi/BLE. Build a programmable Mars Rover replica with robotic arm and live video feed.

[Details](https://openhardware.directory/devices/circuitmess-nasa-mars-perseverance-rover) | [Markdown](https://openhardware.directory/devices/circuitmess-nasa-mars-perseverance-rover/md)

## Olimex ESP32-POE

Open-source ESP32 development board with built-in Ethernet, Power-over-Ethernet support, micro-SD card slot, and LiPo battery connector. Ideal for wired Tasmota nodes and industrial IoT applications.

[Details](https://openhardware.directory/devices/olimex-esp32-poe) | [Markdown](https://openhardware.directory/devices/olimex-esp32-poe/md)

## DFRobot Beetle ESP32-C3

Coin-sized ESP32-C3 RISC-V IoT development board with WiFi, BLE 5.0, integrated LiPo charging, 13 GPIO pins, and USB-C in a 25x20.5mm form factor.

[Details](https://openhardware.directory/devices/dfrobot-beetle-esp32-c3) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-esp32-c3/md)

## Pine64 PineTime

Open-source smartwatch built on the Nordic nRF52832 SoC with 1.3-inch IPS touchscreen, heart rate sensor, accelerometer, and week-long battery life. Runs InfiniTime, Wasp-OS, or Zephyr firmware. Priced from $27.

[Details](https://openhardware.directory/devices/pine64-pinetime) | [Markdown](https://openhardware.directory/devices/pine64-pinetime/md)

## DFRobot FireBeetle 2 ESP32-C5 Development Kit

ESP32-C5 RISC-V development kit with dual-band WiFi 6 (2.4/5GHz), BLE 5, Zigbee 3.0, Thread 1.3, and Matter support. Features solar charging, 21uA deep sleep, IO expansion board, and 18 digital I/O pins at just $8.90.

[Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-c5) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-c5/md)

## nice!nano v2 Wireless Keyboard Controller

Pro Micro drop-in replacement wireless keyboard controller built on the nRF52840 with BLE 5.0, onboard LiPo charger, mid-mount USB-C, and UF2 bootloader. The most popular controller for ZMK wireless split keyboards at $25.

[Details](https://openhardware.directory/devices/nice-nano-v2-wireless-keyboard-controller) | [Markdown](https://openhardware.directory/devices/nice-nano-v2-wireless-keyboard-controller/md)

## DFRobot Beetle ESP32

Compact ESP32 dual-core development board with WiFi, Bluetooth 4.2, sewable I/O pads, and wearable-friendly 35x34mm form factor for IoT and e-textile projects.

[Details](https://openhardware.directory/devices/dfrobot-beetle-esp32) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-esp32/md)

## DFRobot FireBeetle 2 ESP32-E

Compact ESP32-E IoT microcontroller with WiFi 802.11 b/g/n, Bluetooth 4.2, 18 digital I/O, 11 analog inputs, 7 touch pins, 2 DACs, onboard WS2812 RGB LED, GDI display interface, and lithium battery charging in a tiny 25.4x60mm form factor.

[Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-e) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-e/md)

## LuckFox Omni3576

Rockchip RK3576 octa-core edge computing SBC with 6 TOPS NPU, dual Gigabit Ethernet, WiFi 6, dual MIPI CSI camera inputs, HDMI 2.1 4K@120Hz output, and M.2 NVMe slot. Supports Debian, Ubuntu, Android 14, and Buildroot.

[Details](https://openhardware.directory/devices/waveshare-luckfox-omni3576) | [Markdown](https://openhardware.directory/devices/waveshare-luckfox-omni3576/md)

## DFRobot FireBeetle 2 ESP32-P4 AI Development Kit

ESP32-P4 dual-core RISC-V AI development kit with hardware H.264 encoding at 1080p@30fps, MIPI CSI/DSI camera and display interfaces, ESP32-C6 WiFi 6 coprocessor, 32MB PSRAM, 16MB flash, PDM microphone, and IO expansion board.

[Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-p4-kit) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-p4-kit/md)

## Waveshare RP2350B-Plus-W

Compact Pico-form-factor development board featuring the Raspberry Pi RP2350B dual-architecture MCU with WiFi and Bluetooth 5.2 via the Raspberry Pi Radio Module 2, 16MB flash, 26 GPIO pins, and USB-C connectivity.

[Details](https://openhardware.directory/devices/waveshare-rp2350b-plus-w) | [Markdown](https://openhardware.directory/devices/waveshare-rp2350b-plus-w/md)

## DFRobot FireBeetle 2 ESP32-P4 AI Vision Board

ESP32-P4 dual-core RISC-V AI vision board at 360MHz with hardware H.264/JPEG encoding, MIPI CSI/DSI interfaces, ESP32-C6 WiFi 6 coprocessor, 32MB PSRAM, 16MB flash, PDM microphone, TF card slot, and 24 GPIO pins in a compact 25.4x60mm form factor.

[Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-p4) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-p4/md)

## D-Robotics RDK X3

AI-focused single board computer with 5 TOPS NPU, quad-core ARM Cortex-A53, 4GB LPDDR4, dual MIPI CSI cameras, and ROS2 support for robotics and edge AI.

[Details](https://openhardware.directory/devices/d-robotics-rdk-x3) | [Markdown](https://openhardware.directory/devices/d-robotics-rdk-x3/md)

## DFRobot FireBeetle 2 ESP32-S3 (N4)

ESP32-S3 dual-core IoT microcontroller with AI acceleration, WiFi 802.11 b/g/n, BLE 5.0, 26 GPIO pins, 20 ADC channels, USB 2.0 OTG, GDI display interface, lithium battery charging, and stamp-hole PCB design in a 25.4x60mm form factor.

[Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-s3-n4) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-s3-n4/md)

## D-Robotics RDK X5

High-performance AI SBC with 10 TOPS NPU, octa-core ARM Cortex-A55, 8GB LPDDR4, WiFi 6, 4x USB 3.0, dual MIPI CSI, CAN FD, and ROS2 support for advanced robotics.

[Details](https://openhardware.directory/devices/d-robotics-rdk-x5) | [Markdown](https://openhardware.directory/devices/d-robotics-rdk-x5/md)

## DFRobot UNIHIKER K10

All-in-one AI coding board for STEM education with ESP32-S3, 2.8-inch touchscreen, 2MP camera, microphone, speaker, environmental sensors, WiFi, Bluetooth 5, and pre-loaded AI models for vision, voice, and TinyML.

[Details](https://openhardware.directory/devices/dfrobot-unihiker-k10) | [Markdown](https://openhardware.directory/devices/dfrobot-unihiker-k10/md)

## DFRobot Beetle BLE

Ultra-compact Arduino Uno-compatible board with BLE 4.0 (CC2540), ATmega328P, sewable gold-plated I/O pads, and wireless programming in a 28.8x33.1mm wearable form factor.

[Details](https://openhardware.directory/devices/dfrobot-beetle-ble) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-ble/md)

## DFRobot FireBeetle 328P BLE 4.1

Low-power Arduino-compatible board with ATmega328P and Dialog BLE 4.1 chip, featuring 14 digital I/O, 6 analog inputs, wireless OTA programming, 25uA deep sleep, onboard LiPo charging, and dual interrupt wakeup in a compact 58x29mm form factor.

[Details](https://openhardware.directory/devices/dfrobot-firebeetle-328p-ble) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-328p-ble/md)

## DFRobot FireBeetle ESP32

Compact ESP32 IoT microcontroller with dual-core Xtensa LX6 at 240MHz, WiFi 802.11 b/g/n, Bluetooth 4.2, 16MB flash, 520KB SRAM, 10 digital I/O, 5 analog inputs, onboard LiPo charging, 10uA deep sleep, and 250+ tutorials.

[Details](https://openhardware.directory/devices/dfrobot-firebeetle-esp32) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-esp32/md)

## DFRobot ESP32-S3 AI Camera

ESP32-S3 AI camera module with 2MP wide-angle night vision sensor, I2S speaker and microphone, ambient light sensor, WiFi/BLE 5.0, and edge AI inference support in a 42x42mm package.

[Details](https://openhardware.directory/devices/dfrobot-esp32-s3-ai-camera) | [Markdown](https://openhardware.directory/devices/dfrobot-esp32-s3-ai-camera/md)

## DFRobot FireBeetle ESP8266

Compact ESP8266 WiFi IoT microcontroller with Tensilica L106 at 80/160MHz, 16MB flash, 50KB SRAM, 10 digital I/O, onboard LiPo charging, 46uA low-power mode, OTA updates, and Arduino/MicroPython support at just $7.50.

[Details](https://openhardware.directory/devices/dfrobot-firebeetle-esp8266) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-esp8266/md)

## Waveshare ESP32-P4-WIFI6

Pico-form-factor development board combining the ESP32-P4 RISC-V dual-core at 400MHz with an ESP32-C6 co-processor for WiFi 6 and Bluetooth 5 LE. Features 32MB PSRAM, 32MB flash, MIPI-DSI/CSI, onboard audio, microSD, and USB 2.0 OTG HS.

[Details](https://openhardware.directory/devices/waveshare-esp32-p4-wifi6) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-p4-wifi6/md)

## Waveshare ESP32-P4-WIFI6-DEV-KIT

Full-featured ESP32-P4 development board with WiFi 6 and Bluetooth 5 LE via ESP32-C6, 100Mbps Ethernet, PoE header, 3.5mm headphone jack, USB OTG HS switchable host/device, 16MB flash, 32MB PSRAM, MIPI-DSI/CSI, and 28 GPIOs.

[Details](https://openhardware.directory/devices/waveshare-esp32-p4-wifi6-dev-kit) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-p4-wifi6-dev-kit/md)

## VisionFive2 Lite

Compact RISC-V SBC with StarFive JH7110S quad-core 64-bit processor @ 1.25GHz, up to 8GB LPDDR4, onboard WiFi 6 and Bluetooth 5.4, Gigabit Ethernet, HDMI 2.0, M.2 NVMe slot, MIPI CSI camera, 40-pin GPIO, and USB 3.0. Supports Debian, Fedora, OpenWrt, and other Linux distributions.

[Details](https://openhardware.directory/devices/waveshare-visionfive2-lite) | [Markdown](https://openhardware.directory/devices/waveshare-visionfive2-lite/md)

## Arduino Nano Matter

Ultra-compact Matter/Thread/BLE development board based on Silicon Labs MGM240S, bringing official Matter support to the beloved Arduino Nano form factor at 45×18mm.

[Details](https://openhardware.directory/devices/arduino-nano-matter) | [Markdown](https://openhardware.directory/devices/arduino-nano-matter/md)

## Olimex ESP32-C6-EVB

Open-source hardware evaluation board with ESP32-C6, 4 mains-rated relays, 4 opto-isolated inputs, and WiFi 6/Thread/Zigbee/Matter connectivity for home and industrial automation.

[Details](https://openhardware.directory/devices/olimex-esp32-c6-evb) | [Markdown](https://openhardware.directory/devices/olimex-esp32-c6-evb/md)

## SparkFun Thing Plus Matter - MGM240P

Feather-compatible Matter/Thread/Zigbee/BLE dev board based on Silicon Labs MGM240P with Qwiic, LiPo charging, microSD, and +20dBm radio range.

[Details](https://openhardware.directory/devices/sparkfun-thing-plus-matter-mgm240p) | [Markdown](https://openhardware.directory/devices/sparkfun-thing-plus-matter-mgm240p/md)

## Olimex ESP32-C6-DevKit-Lipo

Breadboard-friendly open-source ESP32-C6 dev board with WiFi 6, Thread, Zigbee, BLE 5, built-in LiPo charger, and dual USB-C — all for under €9.

[Details](https://openhardware.directory/devices/olimex-esp32-c6-devkit-lipo) | [Markdown](https://openhardware.directory/devices/olimex-esp32-c6-devkit-lipo/md)

## Olimex ESP32-H2-DevKit-LiPo

Ultra-affordable open-source ESP32-H2 dev board for Thread, Zigbee, and Matter — BLE 5, LiPo charging, Qwiic/Stemma, dual USB-C, for €5.95.

[Details](https://openhardware.directory/devices/olimex-esp32-h2-devkit-lipo) | [Markdown](https://openhardware.directory/devices/olimex-esp32-h2-devkit-lipo/md)

## DFRobot FireBeetle 2 ESP32-C6

Low-cost ESP32-C6 IoT board with WiFi 6, BLE 5, Thread, Zigbee, Matter, solar panel charging with MPPT, and ultra-low 16µA deep sleep — for $5.90.

[Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-c6) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-c6/md)

## DFRobot Beetle ESP32-C6

Coin-sized (25×20.5mm) ESP32-C6 wearable dev board with WiFi 6, BLE 5, Thread, Zigbee, Matter, integrated LiPo charger, and 14µA deep sleep — for $4.90.

[Details](https://openhardware.directory/devices/dfrobot-beetle-esp32-c6) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-esp32-c6/md)

## Adafruit ESP32-C6 Feather

Open-source Feather-form-factor ESP32-C6 board with WiFi 6, BLE 5, Thread, Zigbee, STEMMA QT, NeoPixel, LiPo charging with MAX17048, and CircuitPython support — $14.95.

[Details](https://openhardware.directory/devices/adafruit-esp32-c6-feather) | [Markdown](https://openhardware.directory/devices/adafruit-esp32-c6-feather/md)

## M5Stack NanoH2

Ultra-compact ESP32-H2 dev module with Thread 1.4, Zigbee 3.0, Matter, and BLE 5 — featuring a Grove port, IR transmitter, and RGB LED in a stamp-sized 23.5×12mm form factor.

[Details](https://openhardware.directory/devices/m5stack-nanoh2) | [Markdown](https://openhardware.directory/devices/m5stack-nanoh2/md)

## Espressif ESP Thread Border Router

Official Espressif dual-SoC development board combining ESP32-S3 (host) and ESP32-H2 (radio co-processor) to build Thread 1.3 border routers and Zigbee gateways with Matter support over WiFi.

[Details](https://openhardware.directory/devices/espressif-esp-thread-border-router) | [Markdown](https://openhardware.directory/devices/espressif-esp-thread-border-router/md)

## Radxa Rock 5B

High-performance Rockchip RK3588 SBC from Radxa with up to 32GB LPDDR4X, NVMe M.2, WiFi 6, 2.5GbE, and USB-C PD power — a flagship Linux board in the Raspberry Pi 4 form factor.

[Details](https://openhardware.directory/devices/radxa-rock-5b) | [Markdown](https://openhardware.directory/devices/radxa-rock-5b/md)

## Radxa Rock 5 ITX

Mini-ITX single-board computer powered by Rockchip RK3588 with 16GB LPDDR4X, dual NVMe slots, dual 2.5GbE, PCIe x4, ATX power, and WiFi 6 — a true desktop motherboard replacement.

[Details](https://openhardware.directory/devices/radxa-rock-5-itx) | [Markdown](https://openhardware.directory/devices/radxa-rock-5-itx/md)

## Radxa Rock 4D

Mid-range Rockchip RK3576 SBC from Radxa with up to 8GB LPDDR4X, NVMe M.2, WiFi 6, Gigabit Ethernet, and USB 3.0 — a capable Linux board in a compact footprint.

[Details](https://openhardware.directory/devices/radxa-rock-4d) | [Markdown](https://openhardware.directory/devices/radxa-rock-4d/md)

## Banana Pi M7

Banana Pi M7 is a high-performance SBC powered by the Rockchip RK3588 octa-core SoC with up to 32GB LPDDR4X, NVMe SSD support, WiFi 6, dual 2.5GbE, and USB-C PD power.

[Details](https://openhardware.directory/devices/bananapi-m7) | [Markdown](https://openhardware.directory/devices/bananapi-m7/md)

## Banana Pi M2S

Banana Pi M2S is a hexa-core SBC powered by the Amlogic S922X SoC with 4GB DDR4, 16GB eMMC, WiFi 5, Bluetooth 5.0, four USB 3.0 ports, and Gigabit Ethernet.

[Details](https://openhardware.directory/devices/bananapi-m2s) | [Markdown](https://openhardware.directory/devices/bananapi-m2s/md)

## Radxa Zero 3W

Credit-card sized Rockchip RK3566 SBC with up to 4GB LPDDR4, eMMC, microSD, WiFi 5, Bluetooth 5.0, and USB-C OTG — a compact headless Linux board with no Ethernet port.

[Details](https://openhardware.directory/devices/radxa-zero-3) | [Markdown](https://openhardware.directory/devices/radxa-zero-3/md)

## Banana Pi M2 Pro

Banana Pi M2 Pro is a compact SBC powered by the Amlogic S905X3 with 2GB DDR4, 16GB eMMC, WiFi 5, Bluetooth 5.0, three USB 3.0 ports, and USB-C power input.

[Details](https://openhardware.directory/devices/bananapi-m2-pro) | [Markdown](https://openhardware.directory/devices/bananapi-m2-pro/md)

## Banana Pi CM4 IO

Banana Pi CM4 IO is an SBC carrier board for the BPI-CM4 compute module, featuring RK3566, 4GB LPDDR4, 32GB eMMC, WiFi 5, PCIe, HDMI, and Gigabit Ethernet.

[Details](https://openhardware.directory/devices/bananapi-cm4-io) | [Markdown](https://openhardware.directory/devices/bananapi-cm4-io/md)

## Banana Pi F3

Banana Pi F3 is a RISC-V single-board computer powered by the SpacemiT K1 octa-core SoC with 4GB/8GB LPDDR4X, 16GB/32GB eMMC, WiFi 6, Bluetooth 5.2, and Gigabit Ethernet.

[Details](https://openhardware.directory/devices/bananapi-f3) | [Markdown](https://openhardware.directory/devices/bananapi-f3/md)

## Banana Pi M2+

Banana Pi M2+ is a compact SBC powered by the Allwinner H3 quad-core SoC with 1GB DDR3, 8GB eMMC, 802.11n WiFi, Bluetooth 4.0, four USB 2.0 ports, and micro-USB power.

[Details](https://openhardware.directory/devices/bananapi-m2-plus) | [Markdown](https://openhardware.directory/devices/bananapi-m2-plus/md)

## Banana Pi M4 Zero

Banana Pi M4 Zero is a compact Zero-form-factor SBC powered by the Rockchip RK3528 quad-core SoC with up to 4GB DDR4, 16GB eMMC, WiFi 5, Bluetooth 5.0, and USB-C power.

[Details](https://openhardware.directory/devices/bananapi-m4-zero) | [Markdown](https://openhardware.directory/devices/bananapi-m4-zero/md)

## Radxa Rockpi E

Compact Rockchip RK3328 SBC with up to 4GB DDR4, eMMC, microSD, Gigabit + Fast Ethernet, USB 3.0, optional WiFi/BT, and USB-C power — a versatile small Linux board for networking and IoT.

[Details](https://openhardware.directory/devices/radxa-rockpi-e) | [Markdown](https://openhardware.directory/devices/radxa-rockpi-e/md)

## BeaglePlay

Versatile open-source SBC by BeagleBoard.org featuring the TI AM625 SoC, 2GB LPDDR4, 16GB eMMC, WiFi 5, Bluetooth 5.0, 802.15.4 sub-GHz radio, and Gigabit Ethernet for IoT and home automation.

[Details](https://openhardware.directory/devices/beagleplay) | [Markdown](https://openhardware.directory/devices/beagleplay/md)

## Radxa Rockpi S

Tiny Rockchip RK3308 quad-core SBC with up to 512MB DDR3, 8GB eMMC, microSD, 100Mbps Ethernet, USB 2.0, optional WiFi/BT, and USB-C — a miniature Linux board for audio and IoT projects.

[Details](https://openhardware.directory/devices/radxa-rockpi-s) | [Markdown](https://openhardware.directory/devices/radxa-rockpi-s/md)

## BeagleY-AI

Raspberry Pi HAT-compatible edge AI SBC by BeagleBoard.org, powered by the TI AM67A SoC with 4 TOPS neural accelerator, 4GB LPDDR4, 16GB eMMC, WiFi, and Gigabit Ethernet.

[Details](https://openhardware.directory/devices/beagley-ai) | [Markdown](https://openhardware.directory/devices/beagley-ai/md)

## Tinker Board / S

Raspberry Pi form factor SBC by ASUS featuring the Rockchip RK3288 SoC, 2GB LPDDR3, WiFi 802.11n+Bluetooth 4.0, Gigabit Ethernet, and 4× USB 2.0. The S model adds 16GB eMMC.

[Details](https://openhardware.directory/devices/tinkerboard) | [Markdown](https://openhardware.directory/devices/tinkerboard/md)

## Helios64

Open-source 5-bay NAS server board by Kobol, powered by the Rockchip RK3399 SoC, 4GB LPDDR4, eMMC, WiFi 5+BT 5.0, 2.5GbE, 5× SATA, and 12V DC — a high-performance personal cloud storage platform.

[Details](https://openhardware.directory/devices/helios64) | [Markdown](https://openhardware.directory/devices/helios64/md)

## JetHub D1 / D1+

DIN-rail mountable Linux IoT hub by JetHome, powered by the Amlogic S905W2 SoC with up to 4GB DDR4, 16GB eMMC, WiFi 5, Bluetooth 5.0, Gigabit Ethernet, and 12V DC — designed for home automation and industrial IoT.

[Details](https://openhardware.directory/devices/jethub-d1) | [Markdown](https://openhardware.directory/devices/jethub-d1/md)

## JetHub H1

DIN-rail mountable Linux IoT hub by JetHome, powered by the Amlogic S905W SoC with 2GB DDR4, 8GB eMMC, WiFi 802.11n, Bluetooth 4.0, Gigabit Ethernet, and 12V DC — compact smart home controller for panel installation.

[Details](https://openhardware.directory/devices/jethub-h1) | [Markdown](https://openhardware.directory/devices/jethub-h1/md)

## Adafruit Feather M0 Bluefruit LE

ARM Cortex-M0+ dev board with Bluetooth LE (nRF51822) in the compact Feather form factor. Features 256KB flash, 32KB RAM, native USB, and a built-in LiPo charger for wireless wearable and IoT projects.

[Details](https://openhardware.directory/devices/adafruit-feather-m0-bluefruit-le) | [Markdown](https://openhardware.directory/devices/adafruit-feather-m0-bluefruit-le/md)

## Adafruit Feather M0 WiFi (ATSAMD21 + ATWINC1500)

ARM Cortex-M0+ Feather board with ATWINC1500 802.11 b/g/n WiFi, 256KB flash, 32KB RAM, 10 analog inputs, and built-in LiPo charger. FCC-certified WiFi for IoT and connected projects.

[Details](https://openhardware.directory/devices/adafruit-feather-m0-wifi) | [Markdown](https://openhardware.directory/devices/adafruit-feather-m0-wifi/md)

## Seeeduino Cloud

Arduino Yun-compatible board combining ATmega32u4 with a Dragino HE Linux WiFi module running OpenWRT. Features 802.11 b/g/n WiFi, Ethernet, 14 digital I/O pins, and USB host for IoT gateway applications.

[Details](https://openhardware.directory/devices/seeeduino-cloud) | [Markdown](https://openhardware.directory/devices/seeeduino-cloud/md)

## Raspberry Pi 4 Model B

Flagship Raspberry Pi SBC with BCM2711 quad-core Cortex-A72 @ 1.5GHz, dual-band WiFi, Gigabit Ethernet, dual micro-HDMI 4K outputs, USB 3.0, and USB-C power. Available in 1GB, 2GB, 4GB, and 8GB LPDDR4 RAM variants.

[Details](https://openhardware.directory/devices/raspberry-pi-4-model-b) | [Markdown](https://openhardware.directory/devices/raspberry-pi-4-model-b/md)

## ESP32-C6-WROOM-1-N4 Module

Espressif ESP32-C6 WROOM module with 4MB flash and PCB antenna, supporting Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread — for soldering onto custom IoT hardware.

[Details](https://openhardware.directory/devices/esp32-c6-wroom-1-n4) | [Markdown](https://openhardware.directory/devices/esp32-c6-wroom-1-n4/md)

## ESP32-C6-WROOM-1-N8 Module

Espressif ESP32-C6 WROOM module with 8MB flash and PCB antenna, supporting Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread — for soldering onto custom IoT hardware.

[Details](https://openhardware.directory/devices/esp32-c6-wroom-1-n8) | [Markdown](https://openhardware.directory/devices/esp32-c6-wroom-1-n8/md)

## ESP32-C6-DevKitC-1-N8

Espressif reference development board for the ESP32-C6 with 8MB flash, Wi-Fi 6, Bluetooth 5 LE, Zigbee 3.0, Thread, RGB LED, dual USB-C ports, and full GPIO breakout.

[Details](https://openhardware.directory/devices/esp32-c6-devkitc-1-n8) | [Markdown](https://openhardware.directory/devices/esp32-c6-devkitc-1-n8/md)

## Circuit Playground Bluefruit

Round educational microcontroller with Nordic nRF52840 (64MHz Cortex-M4F + BLE), 10 NeoPixels, accelerometer, microphone, light sensor, speaker, 8 alligator-clip I/O pads, and USB. Runs CircuitPython, MakeCode, and Arduino.

[Details](https://openhardware.directory/devices/circuit-playground-bluefruit) | [Markdown](https://openhardware.directory/devices/circuit-playground-bluefruit/md)

## Raspberry Pi 500

The Raspberry Pi 500 is an all-in-one desktop computer built into a compact keyboard, packing a quad-core Cortex-A76 at 2.4GHz, 8GB LPDDR4X RAM, 32GB microSD, dual-band WiFi 5, Bluetooth 5.0, and a 40-pin GPIO header into a single plug-and-go device.

[Details](https://openhardware.directory/devices/raspberry-pi-500) | [Markdown](https://openhardware.directory/devices/raspberry-pi-500/md)

## Adafruit Feather nRF52 Pro

Bluetooth 5.0 LE Feather board with nRF52832 ARM Cortex M4F at 64MHz, 512KB flash, 64KB SRAM, Apache Mynewt bootloader, SWD debug port, and built-in LiPo charging. For advanced BLE 5.0 open-source applications.

[Details](https://openhardware.directory/devices/adafruit-feather-nrf52-pro) | [Markdown](https://openhardware.directory/devices/adafruit-feather-nrf52-pro/md)

## ESP32-S2 HMI DevKit 1

Espressif ESP32-S2-WROVER HMI development kit with a 4.3″ 800×480 capacitive touchscreen, onboard IMU, microphone, speaker, microSD, IR, and RGB LEDs — designed for smart-home panel prototyping.

[Details](https://openhardware.directory/devices/esp32-s2-hmi-devkit-1) | [Markdown](https://openhardware.directory/devices/esp32-s2-hmi-devkit-1/md)

## Adafruit PyPortal Titano

Large-screen IoT display board with ATSAMD51J20 + ESP32 WiFi coprocessor, 3.5" 320×480 resistive touchscreen TFT, 8MB Flash, microSD, speaker, and USB-C. Designed for Python-powered internet-connected dashboards.

[Details](https://openhardware.directory/devices/adafruit-pyportal-titano) | [Markdown](https://openhardware.directory/devices/adafruit-pyportal-titano/md)

## Arduino MKR1000

Compact Arduino board with SAMD21 ARM Cortex-M0+ and ATSAMW25 integrated WiFi (802.11 b/g/n) with cryptochip and SSL support. Built-in LiPo charger, 8 digital I/O, and 7 analog inputs in a slim 65mm form factor.

[Details](https://openhardware.directory/devices/arduino-mkr1000) | [Markdown](https://openhardware.directory/devices/arduino-mkr1000/md)

## ESP32-S3 Box

Espressif AIoT development kit with ESP32-S3, a 2.4″ 320×240 capacitive touchscreen, dual microphones, speaker, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, and Pmod expansion.

[Details](https://openhardware.directory/devices/esp32-s3-box) | [Markdown](https://openhardware.directory/devices/esp32-s3-box/md)

## ESP32-H2-DevKitM-1-N4S

Espressif development board for the ESP32-H2 with Bluetooth 5 LE, Zigbee 3.0, Thread, and Matter support, 4MB flash, USB-C, RGB LED, and full GPIO breakout — no Wi-Fi.

[Details](https://openhardware.directory/devices/esp32-h2-devkitm-1-n4s) | [Markdown](https://openhardware.directory/devices/esp32-h2-devkitm-1-n4s/md)

## Adafruit ItsyBitsy nRF52840 Express

Tiny breadboard-friendly Bluetooth LE board with Nordic nRF52840 Cortex-M4F @ 64MHz, 1MB Flash, 256KB RAM, 2MB QSPI Flash, 21 GPIO, and native USB — all in a 36×17.6mm footprint. Supports CircuitPython and Arduino.

[Details](https://openhardware.directory/devices/adafruit-itsybitsy-nrf52840-express) | [Markdown](https://openhardware.directory/devices/adafruit-itsybitsy-nrf52840-express/md)

## ESP32-H2-MINI-1 Module

Espressif ESP32-H2 MINI module with 4MB flash and PCB antenna, supporting Bluetooth 5 LE, Zigbee 3.0, Thread, and Matter — a compact bare module for custom PCB designs without Wi-Fi.

[Details](https://openhardware.directory/devices/esp32-h2-mini-1) | [Markdown](https://openhardware.directory/devices/esp32-h2-mini-1/md)

## Raspberry Pi Zero 2 W

Credit-card-tiny Linux SBC with a quad-core Cortex-A53 at 1 GHz, 512 MB RAM, 2.4 GHz WiFi, Bluetooth 4.2, a 40-pin GPIO header footprint, mini HDMI, and a CSI camera connector.

[Details](https://openhardware.directory/devices/raspberry-pi-zero-2-w) | [Markdown](https://openhardware.directory/devices/raspberry-pi-zero-2-w/md)

## Adafruit Feather nRF52840 Sense

Sensor-rich BLE Feather with Nordic nRF52840 (64MHz Cortex-M4F), 6 onboard sensors (9-DoF IMU, magnetometer, proximity/light, PDM mic, humidity, barometric pressure), 21 GPIO, and FCC/IC/TELEC certified.

[Details](https://openhardware.directory/devices/adafruit-feather-nrf52840-sense) | [Markdown](https://openhardware.directory/devices/adafruit-feather-nrf52840-sense/md)

## ESP32-S3-DevKitC-1

Espressif official ESP32-S3 development board with ESP32-S3-WROOM-1 module, dual-core 240 MHz LX7, up to 45 GPIO, dual USB ports, and available in three memory variants: 8MB/2MB PSRAM, 8MB/8MB PSRAM, and 32MB/16MB PSRAM (WROOM-2).

[Details](https://openhardware.directory/devices/esp32-s3-devkitc-1) | [Markdown](https://openhardware.directory/devices/esp32-s3-devkitc-1/md)

## Adafruit HUZZAH ESP8266 Breakout

Breadboard-friendly ESP8266 WiFi breakout at 80 MHz with 802.11 b/g/n, 9 GPIO, 3.3V logic, 500mA regulator, and pre-loaded NodeMCU firmware — Adafruit's accessible entry point to ESP8266 development.

[Details](https://openhardware.directory/devices/adafruit-huzzah-esp8266) | [Markdown](https://openhardware.directory/devices/adafruit-huzzah-esp8266/md)

## ESP32-S2-WROVER Module

Bare WiFi module with Espressif ESP32-S2 single-core Xtensa LX7 @ 240MHz, 4MB Flash, 2MB PSRAM, 802.11b/g/n, native USB 1.1 OTG, and SMD pads. Intended for integration onto custom PCBs, not a standalone dev board.

[Details](https://openhardware.directory/devices/esp32-s2-wrover-module) | [Markdown](https://openhardware.directory/devices/esp32-s2-wrover-module/md)

## ESP32-S3-DevKitM-1

Espressif official ESP32-S3 development board using the compact ESP32-S3-MINI-1 module, with dual-core 240 MHz LX7, 8 MB flash, up to 45 GPIO, dual USB ports, and smaller footprint than the WROOM-1.

[Details](https://openhardware.directory/devices/esp32-s3-devkitm-1) | [Markdown](https://openhardware.directory/devices/esp32-s3-devkitm-1/md)

## Raspberry Pi 500+

The Raspberry Pi 500+ is a premium all-in-one keyboard computer with the Raspberry Pi 5 processor, 16GB LPDDR4X RAM, 256GB internal NVMe SSD, mechanical Gateron KS-33 switches with RGB, dual-band WiFi 5, Bluetooth 5.0, and a 40-pin GPIO header — a complete high-performance desktop in a keyboard.

[Details](https://openhardware.directory/devices/raspberry-pi-500-plus) | [Markdown](https://openhardware.directory/devices/raspberry-pi-500-plus/md)

## ESP32-C3-DevKit-RUST-2

Espressif RISC-V dev board optimized for Rust programming, featuring ESP32-C3-MINI-1 with 4MB flash, Wi-Fi, BT5, onboard ICM-42670-P IMU, SHTC3 temperature/humidity sensor, and USB-C.

[Details](https://openhardware.directory/devices/esp32-c3-devkit-rust-2) | [Markdown](https://openhardware.directory/devices/esp32-c3-devkit-rust-2/md)

## ESP32-S2 Saola 1R Dev Kit

Espressif official ESP32-S2-WROVER development board with dual 20-pin headers (breadboard-friendly), 8MB Flash, 2MB PSRAM, WiFi, dual Micro-USB (native USB + UART bridge), NeoPixel RGB LED, and boot/reset buttons.

[Details](https://openhardware.directory/devices/esp32-s2-saola-1r-dev-kit) | [Markdown](https://openhardware.directory/devices/esp32-s2-saola-1r-dev-kit/md)

## ESP32-S2 Kaluga Dev Kit

Espressif's multimedia-focused ESP32-S2 evaluation platform bundling four extension boards: audio player, capacitive touch panel, 3.2" LCD display, and camera module. Designed to showcase ESP32-S2 human-computer interaction features.

[Details](https://openhardware.directory/devices/esp32-s2-kaluga-dev-kit) | [Markdown](https://openhardware.directory/devices/esp32-s2-kaluga-dev-kit/md)

## ESP32-S3 Korvo 2 Audio Dev Board

Espressif audio and multimedia development board with ESP32-S3, dual-microphone array for far-field wake-word detection, camera support, LCD interface, microSD, and Wi-Fi + BLE.

[Details](https://openhardware.directory/devices/esp32-s3-korvo-2) | [Markdown](https://openhardware.directory/devices/esp32-s3-korvo-2/md)

## ESP32-C3 DevKitM-01

Espressif official RISC-V ESP32-C3 dev board with ESP32-C3-MINI-1 module, 4 MB embedded SPI Flash, WiFi 4, BLE 5, Micro-USB, RGB LED, and a compact footprint for IoT prototyping.

[Details](https://openhardware.directory/devices/esp32-c3-devkitm-01) | [Markdown](https://openhardware.directory/devices/esp32-c3-devkitm-01/md)

## Espressif ESP32-S3-BOX-3

Open-source AIoT development kit with ESP32-S3, 2.4" touchscreen, dual microphones, speaker, Wi-Fi, BLE, Matter support, 16MB flash, 16MB PSRAM, and a high-density expansion connector.

[Details](https://openhardware.directory/devices/esp32-s3-box-3) | [Markdown](https://openhardware.directory/devices/esp32-s3-box-3/md)

## Espressif ESP32-S3-BOX-3B

ESP32-S3-BOX-3 bundle kit including the AIoT dev board with 2.4" touchscreen, dual mics, speaker, plus the DOCK stand, RGB LED module, USB-C cable, and Dupont wires.

[Details](https://openhardware.directory/devices/esp32-s3-box-3b) | [Markdown](https://openhardware.directory/devices/esp32-s3-box-3b/md)

## FeatherS2 ESP32-S2

Full-featured ESP32-S2 Feather-compatible board by Unexpected Maker with 16MB Flash, 8MB QSPI PSRAM, WiFi, native USB-C, 21 GPIO, STEMMA QT, APA102 RGB LED, ambient light sensor, and dual 700mA LDOs.

[Details](https://openhardware.directory/devices/feathers2-esp32-s2) | [Markdown](https://openhardware.directory/devices/feathers2-esp32-s2/md)

## Adafruit Metro ESP32-S2

Arduino Uno-compatible WiFi dev board with ESP32-S2 single-core @ 240MHz, 4MB Flash, 2MB PSRAM, native USB-C, STEMMA QT, LiPoly charging, MAX17048 fuel gauge, barrel jack, and UNO shield compatibility.

[Details](https://openhardware.directory/devices/adafruit-metro-esp32-s2) | [Markdown](https://openhardware.directory/devices/adafruit-metro-esp32-s2/md)

## Adafruit ItsyBitsy ESP32 PCB Antenna

Compact ItsyBitsy-format ESP32 board with 8MB flash, 2MB PSRAM, PCB antenna, Wi-Fi + Bluetooth Classic + BLE, 20 GPIO, NeoPixel, STEMMA QT, and Micro-B USB.

[Details](https://openhardware.directory/devices/adafruit-itsybitsy-esp32-pcb) | [Markdown](https://openhardware.directory/devices/adafruit-itsybitsy-esp32-pcb/md)

## Adafruit Feather HUZZAH ESP8266

All-in-one ESP8266 WiFi Feather board at 80 MHz with 802.11 b/g/n, USB-serial (CP2104), LiPo charging, 9 GPIO, and 4MB flash — the easiest way to add WiFi to a portable battery-powered project.

[Details](https://openhardware.directory/devices/adafruit-feather-huzzah-esp8266) | [Markdown](https://openhardware.directory/devices/adafruit-feather-huzzah-esp8266/md)

## BBC micro:bit v2

Upgraded BBC micro:bit with Nordic nRF52833 Cortex-M4F, Bluetooth 5.1, 5×5 LED matrix, 2 buttons, capacitive touch logo, built-in speaker and MEMS microphone, edge connector, and low-power mode. Same form factor as v1.

[Details](https://openhardware.directory/devices/bbc-micro-bit-v2) | [Markdown](https://openhardware.directory/devices/bbc-micro-bit-v2/md)

## Adafruit Feather nRF52840 Express

Feather board with nRF52840 ARM Cortex-M4F at 64MHz, BLE 5.0, native USB (CDC/HID/MIDI/MSC), 1MB flash, 256KB SRAM, 2MB QSPI flash, 21 GPIO, SWD debug, and LiPo charging. Supports Arduino and CircuitPython.

[Details](https://openhardware.directory/devices/adafruit-feather-nrf52840-express) | [Markdown](https://openhardware.directory/devices/adafruit-feather-nrf52840-express/md)

## Adafruit HUZZAH32 ESP32 Breakout

Minimal ESP32 breakout board with dual-core Xtensa LX6 at 240MHz, 520KB SRAM, 4MB flash, WiFi 802.11 b/g/n, Bluetooth Classic + BLE, 12 ADC, 2 DAC. No USB converter or battery charger — requires external FTDI/CP2104 for programming.

[Details](https://openhardware.directory/devices/adafruit-huzzah32-esp32-breakout) | [Markdown](https://openhardware.directory/devices/adafruit-huzzah32-esp32-breakout/md)

## Adafruit MagTag

The Adafruit MagTag is an ESP32-S2 WiFi e-paper IoT display board featuring a 2.9" 296×128 grayscale e-ink screen, 4 NeoPixels, LIS3DH accelerometer, 4 user buttons, STEMMA QT, USB-C, LiPo charging, and a deep-sleep current of ~250µA — ideal for low-power battery-driven IoT displays.

[Details](https://openhardware.directory/devices/adafruit-magtag) | [Markdown](https://openhardware.directory/devices/adafruit-magtag/md)

## ESP32-S3 Box Lite

Espressif AIoT dev kit — ESP32-S3, 2.4″ 320×240 display, dual MEMS microphones, speaker, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, Pmod expansion — the dock-free Lite sibling of the ESP32-S3 Box.

[Details](https://openhardware.directory/devices/esp32-s3-box-lite) | [Markdown](https://openhardware.directory/devices/esp32-s3-box-lite/md)

## Arduino MKR WiFi 1010

Compact IoT Arduino with SAMD21 Cortex-M0+ @ 48MHz, u-blox NINA-W102 WiFi + Bluetooth module, ATECC508 crypto chip, 256KB Flash, 32KB SRAM, USB full-speed, LiPo charging, and MKR shield compatibility.

[Details](https://openhardware.directory/devices/arduino-mkr-wifi-1010) | [Markdown](https://openhardware.directory/devices/arduino-mkr-wifi-1010/md)

## ESP32-S2 WROOM Module

The ESP32-S2 WROOM is an Espressif WiFi module with a single-core Xtensa LX7 at 240MHz, 4MB flash, 320KB SRAM, built-in PCB antenna, native USB OTG, and rich peripheral support — a cost-effective WiFi-only module (no Bluetooth) with USB capabilities for IoT and embedded designs.

[Details](https://openhardware.directory/devices/esp32-s2-wroom-module) | [Markdown](https://openhardware.directory/devices/esp32-s2-wroom-module/md)

## Raspberry Pi Zero W

Ultra-compact single-board computer with BCM2835 ARM11 at 1 GHz, 512MB RAM, built-in 802.11b/g/n WiFi (BCM43143), Bluetooth 4.1 LE, mini HDMI, microSD, camera connector, and 40-pin GPIO header in a 65mm × 30mm footprint.

[Details](https://openhardware.directory/devices/raspberry-pi-zero-w) | [Markdown](https://openhardware.directory/devices/raspberry-pi-zero-w/md)

## Adafruit HUZZAH32 – ESP32 Feather

ESP32 dual-core 240 MHz Feather board with 802.11b/g/n WiFi, Bluetooth 4.2 Classic and BLE, 4MB flash, 520KB SRAM, 12 ADC channels, 2 DACs, capacitive touch, and built-in LiPo charger.

[Details](https://openhardware.directory/devices/adafruit-huzzah32-esp32) | [Markdown](https://openhardware.directory/devices/adafruit-huzzah32-esp32/md)

## Adafruit Feather nRF52 Bluefruit LE (nRF52832)

nRF52832 ARM Cortex-M4F Feather board with native Bluetooth 5 LE at 64 MHz, 512KB flash, 64KB RAM, 8 analog inputs, 12 PWM channels, and built-in LiPo charger. FCC/IC/TELEC certified for production BLE products.

[Details](https://openhardware.directory/devices/adafruit-feather-nrf52832) | [Markdown](https://openhardware.directory/devices/adafruit-feather-nrf52832/md)

## ESP32-C6 DevKitC-1-N8

Official Espressif development board featuring the ESP32-C6 — a RISC-V single-core MCU with WiFi 6, BLE 5.0, Zigbee 3.0, Thread 1.3, and native Matter support. 8MB flash, USB-C JTAG/serial.

[Details](https://openhardware.directory/devices/esp32-c6-devkitc-1) | [Markdown](https://openhardware.directory/devices/esp32-c6-devkitc-1/md)

## ESP32-H2 DevKitM-1-N4S

Official Espressif development board for the ESP32-H2 — a RISC-V MCU purpose-built for 802.15.4 wireless protocols: BLE 5.3, Zigbee 3.0, Thread 1.3, and Matter. No WiFi. 4MB flash, USB-C with CH343P.

[Details](https://openhardware.directory/devices/esp32-h2-devkitm-1) | [Markdown](https://openhardware.directory/devices/esp32-h2-devkitm-1/md)

## Adafruit ItsyBitsy ESP32

Ultra-compact ESP32 development board in the ItsyBitsy form factor with WiFi, Bluetooth Classic + BLE, USB-C, and LiPo charging — perfect for space-constrained wireless projects.

[Details](https://openhardware.directory/devices/adafruit-itsybitsy-esp32) | [Markdown](https://openhardware.directory/devices/adafruit-itsybitsy-esp32/md)

## Adafruit Matrix Portal S3

ESP32-S3 board designed to drive HUB75 LED matrix panels directly, with built-in WiFi, BLE 5.0, native USB, STEMMA QT connector, and two user buttons — ideal for dynamic digital signage and LED art displays.

[Details](https://openhardware.directory/devices/adafruit-matrix-portal-s3) | [Markdown](https://openhardware.directory/devices/adafruit-matrix-portal-s3/md)

## Adafruit Feather ESP32-S3

Feather-format ESP32-S3 board with native USB, WiFi, BLE 5.0, 8MB flash, LiPo charging, and full Feather ecosystem compatibility — a capable wireless development platform for CircuitPython and Arduino projects.

[Details](https://openhardware.directory/devices/adafruit-feather-esp32-s3) | [Markdown](https://openhardware.directory/devices/adafruit-feather-esp32-s3/md)

## M5Stack Basic Core V2.7

Compact ESP32 IoT dev kit with 2.0" IPS LCD (320x240), 16MB flash, microSD, speaker, 110mAh battery, and three Grove ports in a stackable 54mm square enclosure.

[Details](https://openhardware.directory/devices/m5stack-basic-core-v2-7) | [Markdown](https://openhardware.directory/devices/m5stack-basic-core-v2-7/md)

## M5Stack Station-Bat

Industrial ESP32 controller with 1.14" IPS LCD, 6 Grove ports, INA3221 power monitor, MPU6886 IMU, RTC, 7x SK6812 LEDs, dual 18650 battery holders, USB-A power output, and 16MB flash.

[Details](https://openhardware.directory/devices/m5stack-station-bat) | [Markdown](https://openhardware.directory/devices/m5stack-station-bat/md)

## M5Stack StamPLC

ESP32-S3 industrial PLC controller with 1.14" IPS LCD, 4 relays, 8 opto-isolated inputs, RS-485, CAN bus, INA226 power monitor, RTC, buzzer, microSD, and DIN-rail mounting in a compact enclosure.

[Details](https://openhardware.directory/devices/m5stack-stamplc) | [Markdown](https://openhardware.directory/devices/m5stack-stamplc/md)

## Heltec MeshPocket

Qi2 magnetic wireless charging power bank with integrated Meshtastic mesh networking node, featuring nRF52840 BLE + SX1262 LoRa radio and a 2.13" e-ink display. Available in 5000mAh and 10000mAh configurations.

[Details](https://openhardware.directory/devices/heltec-meshpocket) | [Markdown](https://openhardware.directory/devices/heltec-meshpocket/md)

## Heltec ESP32-C3 Arduino Development Board

Ultra-compact RISC-V development board with ESP32-C3FN4, WiFi, BLE 5.0, integrated battery management, and USB-C — ideal for low-power IoT sensor nodes and wireless prototyping.

[Details](https://openhardware.directory/devices/heltec-esp32-c3) | [Markdown](https://openhardware.directory/devices/heltec-esp32-c3/md)

## Heltec HT-DE01 Multi Size E-Ink Drive Board

A compact universal e-ink driver board based on ESP32-S3FN8 with WiFi and Bluetooth connectivity, 24-pin FFC interface compatible with most e-ink displays, USB-C and LiPo battery support, and Arduino development environment.

[Details](https://openhardware.directory/devices/heltec-ht-de01) | [Markdown](https://openhardware.directory/devices/heltec-ht-de01/md)

## Heltec HT-M00 Dual Channel LoRa Gateway

A compact, low-cost dual-channel LoRaWAN gateway based on ESP32 and dual SX1276 transceivers, designed for indoor LoRa coverage of 1500-2000 square meters with support for SF7-SF12 spreading factors and LoRaWAN Class A/C protocols.

[Details](https://openhardware.directory/devices/heltec-ht-m00) | [Markdown](https://openhardware.directory/devices/heltec-ht-m00/md)

## Arduino UNO R4 WiFi

Arduino's flagship UNO board upgraded with Renesas RA4M1 ARM Cortex-M4F at 48MHz, ESP32-S3 WiFi/BLE 5.0, built-in 12×8 LED matrix, 12-bit DAC, CAN bus, op-amp, and Qwiic connector — all in the classic UNO form factor at 5V.

[Details](https://openhardware.directory/devices/arduino-uno-r4-wifi) | [Markdown](https://openhardware.directory/devices/arduino-uno-r4-wifi/md)

## Arduino Nano ESP32

Arduino Nano form factor powered by ESP32-S3 with WiFi 802.11 b/g/n, Bluetooth LE 5.0, dual-core Xtensa LX7 at 240MHz, 8MB flash, 512KB SRAM, USB-C, and HID support — Arduino's compact IoT powerhouse with MicroPython support.

[Details](https://openhardware.directory/devices/arduino-nano-esp32) | [Markdown](https://openhardware.directory/devices/arduino-nano-esp32/md)

## Arduino GIGA R1 WiFi

Arduino's most powerful board — dual-core STM32H747XI with Cortex-M7 at 480MHz + Cortex-M4 at 240MHz, 2MB flash, 1MB RAM, WiFi, Bluetooth, 76 GPIO, USB-A + USB-C, 3.5mm audio jack, camera connector, and CAN bus in Mega/Due form factor.

[Details](https://openhardware.directory/devices/arduino-giga-r1-wifi) | [Markdown](https://openhardware.directory/devices/arduino-giga-r1-wifi/md)

## Arduino Nano 33 BLE Sense Rev2

Sensor-packed Nano board with nRF52840 ARM Cortex-M4F at 64MHz, BLE 5.0, 9-axis IMU, microphone, temperature, humidity, pressure, light, and gesture sensors — designed for TinyML and edge AI projects in a 45×18mm form factor.

[Details](https://openhardware.directory/devices/arduino-nano-33-ble-sense-rev2) | [Markdown](https://openhardware.directory/devices/arduino-nano-33-ble-sense-rev2/md)

## Arduino Nano RP2040 Connect

Nano form factor board with RP2040 dual-core Cortex-M0+ at 133MHz, 16MB flash, 264KB SRAM, WiFi 802.11 b/g/n and BLE via u-blox NINA-W102, built-in 6-axis IMU and microphone, 22 digital I/O with 20 PWM channels.

[Details](https://openhardware.directory/devices/arduino-nano-rp2040-connect) | [Markdown](https://openhardware.directory/devices/arduino-nano-rp2040-connect/md)

## Arduino UNO Q

Arduino's first Linux-capable UNO — Qualcomm Dragonwing QRB2210 quad-core Cortex-A53 + STM32U585 real-time co-processor, 2GB/4GB RAM, 16GB eMMC, WiFi 5, Bluetooth 5.1, 8×13 LED matrix, USB-C, and AI-ready with Arduino App Lab in the classic UNO form factor.

[Details](https://openhardware.directory/devices/arduino-uno-q) | [Markdown](https://openhardware.directory/devices/arduino-uno-q/md)

## Arduino Stella

Arduino's Ultra-Wideband (UWB) board with nRF52840 ARM Cortex-M4F, Truesense DCU040 UWB module, BLE 5.0, and NFC — enabling centimeter-accurate indoor positioning, asset tracking, and secure proximity interactions.

[Details](https://openhardware.directory/devices/arduino-stella) | [Markdown](https://openhardware.directory/devices/arduino-stella/md)

## Arduino Nicla Voice

Tiny 22.86mm AI voice module with nRF52840 BLE 5.0, Syntiant NDP120 neural decision processor, MEMS microphone, 6-axis IMU, and magnetometer — runs always-on voice recognition and audio anomaly detection at ultra-low power.

[Details](https://openhardware.directory/devices/arduino-nicla-voice) | [Markdown](https://openhardware.directory/devices/arduino-nicla-voice/md)

## Arduino Nicla Vision

Tiny 22.86mm AI vision module with STM32H747 dual-core Cortex-M7/M4, 2MP camera, WiFi/BLE, 6-axis IMU, microphone, and time-of-flight sensor — runs TinyML image recognition and OpenMV/MicroPython at the edge.

[Details](https://openhardware.directory/devices/arduino-nicla-vision) | [Markdown](https://openhardware.directory/devices/arduino-nicla-vision/md)

## Arduino Nicla Sense ME

Compact 22.86mm sensor module with nRF52840 BLE 5.0 and four Bosch sensors — 9-axis IMU with AI, barometric pressure, temperature/humidity, and gas/CO2 detection. Edge AI-powered environmental and motion sensing in a coin-sized package.

[Details](https://openhardware.directory/devices/arduino-nicla-sense-me) | [Markdown](https://openhardware.directory/devices/arduino-nicla-sense-me/md)

## Arduino Opta WiFi

Industrial micro PLC with STM32H747 dual-core Cortex-M7/M4, WiFi, BLE, Ethernet, 4\u00d72.3kW relays, Modbus TCP/RTU, hardware security, DIN rail mount, and IEC 61131-3 PLC programming — co-developed with Finder for real industrial automation.

[Details](https://openhardware.directory/devices/arduino-opta-wifi) | [Markdown](https://openhardware.directory/devices/arduino-opta-wifi/md)

## BigTreeTech BTT Pi V1.2

Single board computer by BigTreeTech with Allwinner H616 quad-core Cortex-A53, 1GB DDR3L RAM, WiFi, 100Mbps Ethernet, and 40-pin GPIO. Drop-in Raspberry Pi CM4 alternative for Klipper 3D printing.

[Details](https://openhardware.directory/devices/bigtreetech-btt-pi-v1-2) | [Markdown](https://openhardware.directory/devices/bigtreetech-btt-pi-v1-2/md)

## BigTreeTech CB2

Compute module by BigTreeTech powered by Rockchip RK3566 quad-core Cortex-A55 at 1.8GHz, 2GB/4GB LPDDR4, 32GB eMMC, Gigabit Ethernet, WiFi 5 (802.11ac), and Bluetooth 5.2. CM4-form-factor.

[Details](https://openhardware.directory/devices/bigtreetech-cb2) | [Markdown](https://openhardware.directory/devices/bigtreetech-cb2/md)

## BigTreeTech Panda Touch

5-inch 800x480 IPS WiFi touchscreen for Bambu Lab X1, P1, and A1 series 3D printers. ESP32-S3 based, 16MB flash, 8MB PSRAM, built-in battery for portable use, supports up to 4 printers simultaneously.

[Details](https://openhardware.directory/devices/bigtreetech-panda-touch) | [Markdown](https://openhardware.directory/devices/bigtreetech-panda-touch/md)

## BigTreeTech K-Touch

5-inch 800x480 IPS WiFi touchscreen controller for Klipper printers. ESP32-S3 based, 16MB flash, 8MB PSRAM, built-in battery for 30 minutes portable use, supports up to 50 Klipper printers.

[Details](https://openhardware.directory/devices/bigtreetech-k-touch) | [Markdown](https://openhardware.directory/devices/bigtreetech-k-touch/md)

## BigTreeTech KNOMI 2

1.28-inch round 240x240 LCD display for Voron StealthBurner toolhead. ESP32 MCU with WiFi and Bluetooth LE, shows print status, temperatures, and progress with customizable animated UI.

[Details](https://openhardware.directory/devices/bigtreetech-knomi-2) | [Markdown](https://openhardware.directory/devices/bigtreetech-knomi-2/md)

## BigTreeTech Panda Knomi

1.28-inch round 240x240 display for Bambu Lab A1, X1, and P1 series printers. ESP32 MCU with 2.4GHz WiFi, customizable GIF animations, shows print status and temperatures wirelessly.

[Details](https://openhardware.directory/devices/bigtreetech-panda-knomi) | [Markdown](https://openhardware.directory/devices/bigtreetech-panda-knomi/md)