# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**8 device listed.**

## ESP32-S2-WROVER Module

Bare WiFi module with Espressif ESP32-S2 single-core Xtensa LX7 @ 240MHz, 4MB Flash, 2MB PSRAM, 802.11b/g/n, native USB 1.1 OTG, and SMD pads. Intended for integration onto custom PCBs, not a standalone dev board.

[Details](https://openhardware.directory/devices/esp32-s2-wrover-module) | [Markdown](https://openhardware.directory/devices/esp32-s2-wrover-module/md)

## ESP32-S2-WROVER-I Module with uFL

Bare WiFi module with ESP32-S2 Xtensa LX7 @ 240MHz, 4MB Flash, 2MB PSRAM, 802.11b/g/n, native USB OTG, and a uFL connector for an external antenna. Drop-in variant of the WROVER for improved RF range.

[Details](https://openhardware.directory/devices/esp32-s2-wrover-i-module-with-ufl) | [Markdown](https://openhardware.directory/devices/esp32-s2-wrover-i-module-with-ufl/md)

## ESP32-S2 Saola 1R Dev Kit

Espressif official ESP32-S2-WROVER development board with dual 20-pin headers (breadboard-friendly), 8MB Flash, 2MB PSRAM, WiFi, dual Micro-USB (native USB + UART bridge), NeoPixel RGB LED, and boot/reset buttons.

[Details](https://openhardware.directory/devices/esp32-s2-saola-1r-dev-kit) | [Markdown](https://openhardware.directory/devices/esp32-s2-saola-1r-dev-kit/md)

## ESP32-S2 Kaluga Dev Kit

Espressif's multimedia-focused ESP32-S2 evaluation platform bundling four extension boards: audio player, capacitive touch panel, 3.2" LCD display, and camera module. Designed to showcase ESP32-S2 human-computer interaction features.

[Details](https://openhardware.directory/devices/esp32-s2-kaluga-dev-kit) | [Markdown](https://openhardware.directory/devices/esp32-s2-kaluga-dev-kit/md)

## FeatherS2 ESP32-S2

Full-featured ESP32-S2 Feather-compatible board by Unexpected Maker with 16MB Flash, 8MB QSPI PSRAM, WiFi, native USB-C, 21 GPIO, STEMMA QT, APA102 RGB LED, ambient light sensor, and dual 700mA LDOs.

[Details](https://openhardware.directory/devices/feathers2-esp32-s2) | [Markdown](https://openhardware.directory/devices/feathers2-esp32-s2/md)

## Adafruit Metro ESP32-S2

Arduino Uno-compatible WiFi dev board with ESP32-S2 single-core @ 240MHz, 4MB Flash, 2MB PSRAM, native USB-C, STEMMA QT, LiPoly charging, MAX17048 fuel gauge, barrel jack, and UNO shield compatibility.

[Details](https://openhardware.directory/devices/adafruit-metro-esp32-s2) | [Markdown](https://openhardware.directory/devices/adafruit-metro-esp32-s2/md)

## Adafruit MagTag

The Adafruit MagTag is an ESP32-S2 WiFi e-paper IoT display board featuring a 2.9" 296×128 grayscale e-ink screen, 4 NeoPixels, LIS3DH accelerometer, 4 user buttons, STEMMA QT, USB-C, LiPo charging, and a deep-sleep current of ~250µA — ideal for low-power battery-driven IoT displays.

[Details](https://openhardware.directory/devices/adafruit-magtag) | [Markdown](https://openhardware.directory/devices/adafruit-magtag/md)

## ESP32-S2 WROOM Module

The ESP32-S2 WROOM is an Espressif WiFi module with a single-core Xtensa LX7 at 240MHz, 4MB flash, 320KB SRAM, built-in PCB antenna, native USB OTG, and rich peripheral support — a cost-effective WiFi-only module (no Bluetooth) with USB capabilities for IoT and embedded designs.

[Details](https://openhardware.directory/devices/esp32-s2-wroom-module) | [Markdown](https://openhardware.directory/devices/esp32-s2-wroom-module/md)