# device — Open Hardware Directory > **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link. **181 device listed.** ## LILYGO T-Deck Plus ESP32-S3 handheld dev board with QWERTY keyboard, trackball, 2.8" IPS LCD, LoRa SX1262, GPS, speaker, dual microphones, and 2000mAh battery in an ABS case. [Details](https://openhardware.directory/devices/lilygo-t-deck-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-deck-plus/md) ## LILYGO T3 LoRa32 V1.6.1 ESP32-PICO-D4 development board with LoRa SX1276/SX1278 radio, 0.96\" SSD1306 OLED, microSD slot, WiFi, Bluetooth 4.2, and LiPo battery support in a compact 66×36mm form factor. [Details](https://openhardware.directory/devices/lilygo-t3-lora32-v1-6-1) | [Markdown](https://openhardware.directory/devices/lilygo-t3-lora32-v1-6-1/md) ## LILYGO T-Watch S3 Open-source ESP32-S3 smartwatch with LoRa, 1.3" 240×240 IPS touchscreen, haptic feedback, accelerometer, speaker, microphone, IR transmitter, and 1500mAh battery. Supports Meshtastic, ESPHome, Arduino, and MicroPython. [Details](https://openhardware.directory/devices/lilygo-t-watch-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-s3/md) ## LILYGO T-Display Compact ESP32-PICO-D4 development board with integrated 1.14-inch ST7789V IPS LCD (135×240, 260 PPI), WiFi, Bluetooth 4.2/BLE, and Arduino/MicroPython support. [Details](https://openhardware.directory/devices/lilygo-t-display) | [Markdown](https://openhardware.directory/devices/lilygo-t-display/md) ## LILYGO T-Beam ESP32 development board combining LoRa radio (SX1276/SX1278), u-blox NEO-6M GPS, 0.96" OLED display, and 18650 battery support — the go-to board for Meshtastic and LoRa tracking projects. [Details](https://openhardware.directory/devices/lilygo-t-beam) | [Markdown](https://openhardware.directory/devices/lilygo-t-beam/md) ## LILYGO T-Display S3 ESP32-S3 development board with 1.9-inch ST7789V TFT display (170×320), optional capacitive touch, 16MB flash, 8MB PSRAM, and USB-C. Popular for smart displays and IoT dashboards. [Details](https://openhardware.directory/devices/lilygo-t-display-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3/md) ## LILYGO T-SIM7000G ESP32 board with SIMCom SIM7000G multi-band LTE-M/NB-IoT modem, GPS, 8MB PSRAM, USB-C, and 18650 battery support — designed for global cellular IoT deployments. [Details](https://openhardware.directory/devices/lilygo-t-sim7000g) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim7000g/md) ## LILYGO T-Watch 2020 V3 Programmable ESP32 smartwatch with 1.54-inch touch IPS display, BMA423 accelerometer, PCF8563 RTC, PDM microphone, speaker, IR transmitter, and vibration motor — fully open-source and Arduino/MicroPython programmable. [Details](https://openhardware.directory/devices/lilygo-t-watch-2020-v3) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-2020-v3/md) ## LILYGO T-Higrow ESP32 plant sensor board with capacitive soil moisture, soil fertility, BH1750 light sensor, and DHT11/BME280 temperature/humidity — WiFi-connected smart plant care for gardens and greenhouses. [Details](https://openhardware.directory/devices/lilygo-t-higrow) | [Markdown](https://openhardware.directory/devices/lilygo-t-higrow/md) ## LILYGO T-QT Pro Ultra-compact ESP32-S3 board with a 0.85-inch GC9107 IPS display (128×128), 2MB PSRAM, WiFi, BLE 5.0, and USB-C — one of the smallest ESP32-S3 development boards available. [Details](https://openhardware.directory/devices/lilygo-t-qt-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-qt-pro/md) ## LILYGO T-Display S3 AMOLED ESP32-S3 board with 1.91-inch RM67162 AMOLED display (240×536), optional touch, 16MB flash, 8MB PSRAM, and USB-C — delivering vivid OLED visuals for IoT dashboards and smart displays. [Details](https://openhardware.directory/devices/lilygo-t-display-s3-amoled) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3-amoled/md) ## LILYGO T-Call SIM800 ESP32 board with SIM800L 2G GSM/GPRS modem for SMS alerts, voice calls, and cellular data — ideal for remote monitoring and IoT projects needing cellular fallback on a budget. [Details](https://openhardware.directory/devices/lilygo-t-call-sim800) | [Markdown](https://openhardware.directory/devices/lilygo-t-call-sim800/md) ## LILYGO T-Pico C3 Dual-MCU board combining RP2040 and ESP32-C3, with a 1.14-inch ST7789V display, WiFi, BLE 5.0, and Arduino/MicroPython support — bringing Raspberry Pi Pico connectivity to wireless IoT projects. [Details](https://openhardware.directory/devices/lilygo-t-pico) | [Markdown](https://openhardware.directory/devices/lilygo-t-pico/md) ## LILYGO T-Dongle S3 ESP32-S3 USB-A dongle with a 0.96-inch ST7735 color display (80×160), 16MB flash, WiFi, and BLE 5.0 — a compact plug-in development stick for IoT, media, and wireless sensor nodes. [Details](https://openhardware.directory/devices/lilygo-t-dongle-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-dongle-s3/md) ## LILYGO T-Embed ESP32-S3 all-in-one media board with 1.9-inch TFT display, rotary encoder, dual microphones, 1W speaker, 7 RGB LEDs, GROVE connector, and LiPo battery support — ideal for audio players and interactive IoT devices. [Details](https://openhardware.directory/devices/lilygo-t-embed) | [Markdown](https://openhardware.directory/devices/lilygo-t-embed/md) ## LILYGO T-Deck ESP32-S3 handheld terminal with 2.8-inch IPS display, mini QWERTY keyboard, trackball, optional SX1262 LoRa, speaker, and microphone — a self-contained portable communicator running Meshtastic and MeshCore. [Details](https://openhardware.directory/devices/lilygo-t-deck) | [Markdown](https://openhardware.directory/devices/lilygo-t-deck/md) ## LILYGO T-HMI ESP32-S3 HMI development board with a 2.8-inch resistive touchscreen, GROVE connectors, 16MB flash, 8MB PSRAM, and USB-C — designed for industrial HMI panels and interactive control interfaces. [Details](https://openhardware.directory/devices/lilygo-t-hmi) | [Markdown](https://openhardware.directory/devices/lilygo-t-hmi/md) ## LILYGO T-ETH-Lite Compact ESP32-S3 development board with wired Ethernet (W5500 SPI), WiFi, BLE, microSD slot, and optional PoE and camera shields for reliable networked IoT edge nodes. [Details](https://openhardware.directory/devices/lilygo-t-eth-lite) | [Markdown](https://openhardware.directory/devices/lilygo-t-eth-lite/md) ## LILYGO T-Watch Ultra Premium ESP32-S3 smartwatch development platform with 2.06" AMOLED touchscreen, LoRa SX1262, GNSS, NFC, MAX98357A audio, DRV2605 haptic, AXP2101 PMIC, and 1100mAh battery. [Details](https://openhardware.directory/devices/lilygo-t-watch-ultra) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-ultra/md) ## LILYGO T-Glass Wearable ESP32-S3 development board with 1.1" full-color AMOLED display in a glasses prism form factor, microphone, RTC, and touch button for head-up display applications. [Details](https://openhardware.directory/devices/lilygo-t-glass) | [Markdown](https://openhardware.directory/devices/lilygo-t-glass/md) ## LILYGO T-Halow ESP32-S3 development board with WiFi HaLow (802.11ah) sub-GHz radio for long-range IoT deployments, plus standard 2.4GHz WiFi, BLE 5.0, microSD, and 18650 battery support. [Details](https://openhardware.directory/devices/lilygo-t-halow) | [Markdown](https://openhardware.directory/devices/lilygo-t-halow/md) ## LILYGO T-Display S3 Pro Upgraded T-Display S3 with a larger 2.33" IPS touchscreen, ESP32-S3R8, OTG charging via SY6970, QWIIC ports, ambient light/proximity sensor, and optional camera module expansion via POGOpin. [Details](https://openhardware.directory/devices/lilygo-t-display-s3-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3-pro/md) ## LILYGO T-Beam Supreme Upgraded T-Beam with ESP32-S3FN8, QMI8658 6-axis IMU, LoRa SX1262, dual GPS options (L76K or u-blox), SoftRF firmware support, and multi-frequency bands for Meshtastic and aircraft tracking. [Details](https://openhardware.directory/devices/lilygo-t-beam-supreme) | [Markdown](https://openhardware.directory/devices/lilygo-t-beam-supreme/md) ## LILYGO T-Watch S3 Plus ESP32-S3 smartwatch dev board with LoRa SX1262, GNSS, BMA423 accelerometer, MAX98357A audio, DRV2605 haptic feedback, AXP2101 PMIC, and 940mAh battery for wearable LoRa projects. [Details](https://openhardware.directory/devices/lilygo-t-watch-s3-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-s3-plus/md) ## LILYGO T7 S3 Ultra-affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, USB 3.0, QWIIC/Stemma QT connector, power switch, and breadboard-compatible pinout at under $8. [Details](https://openhardware.directory/devices/lilygo-t7-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t7-s3/md) ## LILYGO T-CAN485 ESP32 development board with integrated CAN bus and RS-485 transceivers, TF card, WiFi, and BLE for industrial IoT, Modbus, and automotive OBD-II applications with 5–12V wide-range power input. [Details](https://openhardware.directory/devices/lilygo-t-can485) | [Markdown](https://openhardware.directory/devices/lilygo-t-can485/md) ## LILYGO T-QT C6 Tiny ESP32-C6 dev board with WiFi 6, BLE 5, Zigbee/Thread (802.15.4), 0.85" 128×128 touchscreen, LiPo battery charging, and breathing LED in a thumbnail-sized form factor. [Details](https://openhardware.directory/devices/lilygo-t-qt-c6) | [Markdown](https://openhardware.directory/devices/lilygo-t-qt-c6/md) ## LILYGO T-Circle S3 Compact ESP32-S3 board with a 0.75" round 160×160 TFT LCD (GC9D01N), 16MB flash, 8MB PSRAM, WiFi, and BLE 5 for wearable watchface and circular display applications. [Details](https://openhardware.directory/devices/lilygo-t-circle-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-circle-s3/md) ## LILYGO T-Energy S3 Affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, integrated 18650 battery holder, WiFi, and BLE 5.0 for battery-powered IoT sensor nodes under $10. [Details](https://openhardware.directory/devices/lilygo-t-energy-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-energy-s3/md) ## LILYGO T3 S3 ESP32-S3 LoRa development board with 0.96" OLED display, multiple LoRa module options (SX1262/SX1276/SX1280/LR1121), WiFi, BLE, and 18650 battery support for Meshtastic and IoT applications. [Details](https://openhardware.directory/devices/lilygo-t3-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t3-s3/md) ## LILYGO T-SIM7080G S3 ESP32-S3 development board with SIM7080G NB-IoT/LTE-M/GNSS module, 16MB flash, 8MB PSRAM, 18650 battery support, and USB-C connectivity for low-power IoT applications. [Details](https://openhardware.directory/devices/lilygo-t-sim7080g-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim7080g-s3/md) ## LILYGO T-Embed SI4732 ESP32-S3 board with SI4732-A10 AM/FM/SW/LW radio receiver, 1.9" IPS display, 900mAh battery, and rotary encoder for a portable software-defined radio experience. [Details](https://openhardware.directory/devices/lilygo-t-embed-si4732) | [Markdown](https://openhardware.directory/devices/lilygo-t-embed-si4732/md) ## LILYGO T7-C6 Compact ESP32-C6 development board with WiFi 6, BLE 5, and IEEE 802.15.4 (Zigbee/Thread/Matter) support, featuring 4MB flash and USB-C for next-generation IoT protocols. [Details](https://openhardware.directory/devices/lilygo-t7-c6) | [Markdown](https://openhardware.directory/devices/lilygo-t7-c6/md) ## LILYGO T-Display Bar ESP32-S3 development board with a unique wide bar-format display, 16MB flash, 8MB PSRAM, and USB-C for information display and custom UI projects. [Details](https://openhardware.directory/devices/lilygo-t-display-bar) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-bar/md) ## LILYGO T-Display AMOLED Lite Compact ESP32-S3 development board featuring a 1.47" RM67162 AMOLED display with QSPI interface, 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and battery charging support. [Details](https://openhardware.directory/devices/lilygo-t-display-amoled-lite) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-amoled-lite/md) ## LILYGO T-Display S3 AMOLED Plus Enhanced ESP32-S3 AMOLED development board with 1.91" RM67162 display, onboard RTC, PMU, SD card slot, capacitive touch, metal shielding, and external FPC antenna. [Details](https://openhardware.directory/devices/lilygo-t-display-s3-amoled-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3-amoled-plus/md) ## LILYGO T5s 2.7 inch E-Paper LILYGO T5s is an ESP32 development board with a 2.7-inch 264×176 e-paper display, onboard I2S audio (MAX98357A amplifier + ICS43434 MEMS mic), 500mA battery management, and TF card support. [Details](https://openhardware.directory/devices/lilygo-t5s-2-7inch-e-paper) | [Markdown](https://openhardware.directory/devices/lilygo-t5s-2-7inch-e-paper/md) ## LILYGO T8-C3 LILYGO T8-C3 is a compact ESP32-C3 development board featuring Wi-Fi, BLE 5.0, 4MB flash, TF card slot, and USB Type-C, requiring the T-U2T adapter for programming. [Details](https://openhardware.directory/devices/lilygo-t8-c3) | [Markdown](https://openhardware.directory/devices/lilygo-t8-c3/md) ## LILYGO T-OI Plus LILYGO T-OI Plus is a compact ESP32-C3 development board with Wi-Fi, BLE 5.0, Grove connectors, and optional 16340 battery holder, designed to fit Sonoff BASICR2 enclosures. [Details](https://openhardware.directory/devices/lilygo-t-oi-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-oi-plus/md) ## LILYGO T5 2.13inch E-Paper LILYGO T5 2.13inch E-Paper is an ESP32-D0WDQ6 V3 development board with a 2.13-inch 212×104 e-ink display supporting 4-level grayscale, 4MB flash, TF card slot, and battery management with 4 user buttons. [Details](https://openhardware.directory/devices/lilygo-t5-2-13inch-e-paper) | [Markdown](https://openhardware.directory/devices/lilygo-t5-2-13inch-e-paper/md) ## LILYGO T-01C3 LILYGO T-01C3 is an ultra-compact ESP32-C3 RISC-V module with Wi-Fi and BLE 5.0, available with or without pre-soldered pins, featuring 5.33µA deep sleep current. [Details](https://openhardware.directory/devices/lilygo-t-01c3) | [Markdown](https://openhardware.directory/devices/lilygo-t-01c3/md) ## LILYGO T-Micro32 Plus LILYGO T-Micro32 Plus is an upgraded compact ESP32 module with 8MB flash, 2MB PSRAM, expanded GPIO, and an improved RED C3 ceramic antenna for stronger wireless performance. [Details](https://openhardware.directory/devices/lilygo-t-micro32-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-micro32-plus/md) ## LILYGO T-Micro32 V2.0 LILYGO T-Micro32 V2.0 is a 45%-smaller ESP32 PICO-D4 module with integrated IPEX antenna connector, designed for space-constrained embedded product designs. [Details](https://openhardware.directory/devices/lilygo-t-micro32-v2) | [Markdown](https://openhardware.directory/devices/lilygo-t-micro32-v2/md) ## LILYGO T-Micro32 S3 LILYGO T-Micro32 S3 is an ultra-compact ESP32-S3FH4R2 module with Wi-Fi, BLE 5.0, 4MB flash, 2MB PSRAM, and dual-core Xtensa LX7 processor in a minimal footprint. [Details](https://openhardware.directory/devices/lilygo-t-micro32-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-micro32-s3/md) ## LILYGO T-Lion ESP32-WROVER development board with 0.96-inch OLED display, five-way directional button, single 18650 battery holder, 8MB PSRAM, WiFi, and BLE 4.2 — a compact handheld IoT controller in a slim form factor. [Details](https://openhardware.directory/devices/lilygo-t-lion) | [Markdown](https://openhardware.directory/devices/lilygo-t-lion/md) ## LILYGO LoRa3 (T3 LoRa32 V1.6.1) LILYGO LoRa3 (T3 LoRa32 V1.6.1) is an ESP32 development board combining Wi-Fi, BLE, and LoRa radio (SX1276/SX1278) with OLED display and TF card slot for IoT and mesh networking. [Details](https://openhardware.directory/devices/lilygo-lora3) | [Markdown](https://openhardware.directory/devices/lilygo-lora3/md) ## LILYGO T-Watch 2021 Programmable ESP32 smartwatch with 1.3-inch round GC9A01 IPS touchscreen (240×240), BMA423 accelerometer, vibration motor, RTC, WiFi, and BLE 4.2 — open-source and fully programmable with Arduino or MicroPython. [Details](https://openhardware.directory/devices/lilygo-t-watch-2021) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-2021/md) ## LILYGO T7 V1.3 Mini32 ESP32 Compact ESP32 development board (Mini32 form factor) with 4MB Flash, WiFi 802.11 b/g/n, Bluetooth 4.2, CH340C USB-to-serial, TP4054 LiPo charger, and 1.25mm JST battery connector — a classic breadboard-compatible IoT dev board. [Details](https://openhardware.directory/devices/lilygo-t7-v1-3-mini-32-esp32) | [Markdown](https://openhardware.directory/devices/lilygo-t7-v1-3-mini-32-esp32/md) ## LILYGO T-Connect Pro ESP32-S3 three-board stack with SX1262 LoRa, CAN, RS485, RS232, Ethernet (W5500), relay, capacitive touch LCD, and DC input — a versatile industrial IoT gateway with long-range wireless. [Details](https://openhardware.directory/devices/lilygo-t-connect-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-connect-pro/md) ## LILYGO T-Track ESP32-S3R8 development board with a 1.1-inch JD9613 AMOLED display (126×294), onboard trackball, 16MB flash, 8MB PSRAM, WiFi, and BLE 5 — a compact touchless navigation dev kit for creative UI and interactive IoT applications. [Details](https://openhardware.directory/devices/lilygo-t-track) | [Markdown](https://openhardware.directory/devices/lilygo-t-track/md) ## LILYGO LoRa V1.3 LILYGO LoRa V1.3 is an ESP32 development board with SX1276 LoRa radio at 868/915 MHz, optional 0.96-inch OLED display, Wi-Fi, BLE, and 4MB flash for IoT and LoRa applications. [Details](https://openhardware.directory/devices/lilygo-lora-v1-3) | [Markdown](https://openhardware.directory/devices/lilygo-lora-v1-3/md) ## LILYGO T7 Mini32 V1.5 Updated ESP32 Mini32 development board with 8MB PSRAM, 4/16MB Flash options, dual-core 240MHz, CH9102 USB-serial, WiFi, BLE 4.2, and 1.25mm JST LiPo connector in a 40×31mm breadboard-friendly footprint. [Details](https://openhardware.directory/devices/lilygo-t7-mini32-v1-5) | [Markdown](https://openhardware.directory/devices/lilygo-t7-mini32-v1-5/md) ## LILYGO T-Display K230 AI-capable development board powered by KENDRYTE K230 dual-core 64-bit RISC-V SoC running at 1.6GHz with KPU neural network accelerator, 4.1" AMOLED display, and LoRa connectivity in multiple frequency bands. [Details](https://openhardware.directory/devices/lilygo-t-display-k230) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-k230/md) ## LILYGO T4 LILYGO T4 is an ESP32 development board with 8MB PSRAM, optional 2.2 or 2.4-inch ILI9341 TFT LCD display, Wi-Fi, Bluetooth 4.2 BLE, and Li-Po battery support. [Details](https://openhardware.directory/devices/lilygo-t4) | [Markdown](https://openhardware.directory/devices/lilygo-t4/md) ## LILYGO ESP32 OLED V3.0 ESP32 development board with integrated 0.96-inch SSD1306 OLED display, 4MB Flash, 520KB SRAM, WiFi, Bluetooth dual-mode, USB-C, and onboard LiPo battery charging for compact IoT display projects. [Details](https://openhardware.directory/devices/lilygo-esp32-oled-v3-0) | [Markdown](https://openhardware.directory/devices/lilygo-esp32-oled-v3-0/md) ## LILYGO T4 S3 LILYGO T4 S3 is an ESP32-S3 development board with a 2.41-inch AMOLED touchscreen (450x600), 16MB flash, 8MB PSRAM, microSD slot, Wi-Fi, and Bluetooth 5 LE. [Details](https://openhardware.directory/devices/lilygo-t4-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t4-s3/md) ## LILYGO ESP32-S2 Pure ESP32-S2 development board with 4MB Flash, 8MB SRAM, native USB, WiFi 802.11 b/g/n, onboard LiPo charging, and multiple control buttons — a single-core Xtensa LX7 board for USB-HID and IoT applications. [Details](https://openhardware.directory/devices/lilygo-esp32-s2) | [Markdown](https://openhardware.directory/devices/lilygo-esp32-s2/md) ## LILYGO ESP32-S2 WOOR Compact ESP32-S2-WROOM module-based development board with 4MB Flash, 320KB SRAM, native USB OTG, WiFi 802.11 b/g/n, onboard LiPo charging, and BOOT/RESET buttons for USB HID and IoT prototyping. [Details](https://openhardware.directory/devices/lilygo-esp32-s2-woor) | [Markdown](https://openhardware.directory/devices/lilygo-esp32-s2-woor/md) ## LILYGO T-Bao Dual-MCU development board combining ESP32 and KENDRYTE K210 RISC-V AI processor with OV2640 camera, 1.54" IPS touchscreen, I2S audio amplifier, motor driver, 6-axis IMU, and Wi-Fi for edge AI and robotics prototyping. [Details](https://openhardware.directory/devices/lilygo-t-bao) | [Markdown](https://openhardware.directory/devices/lilygo-t-bao/md) ## M5Stack CoreS3 Third-generation M5Stack Core with ESP32-S3 dual-core 240MHz, 2.0\" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, RTC, 500mAh battery, and DinBase for mounting. [Details](https://openhardware.directory/devices/m5stack-cores3) | [Markdown](https://openhardware.directory/devices/m5stack-cores3/md) ## M5Stack Atom Lite Ultra-compact ESP32-PICO-D4 development board (24x24mm) with RGB LED, programmable button, IR transmitter, Grove port, and 6 GPIO pins. Supports Arduino, ESP-IDF, UIFlow, and MicroPython. [Details](https://openhardware.directory/devices/m5stack-atom-lite) | [Markdown](https://openhardware.directory/devices/m5stack-atom-lite/md) ## M5StickC Plus 2 Compact ESP32-PICO-V3-02 wearable dev board with 1.14" TFT LCD (135x240), 6-axis IMU (MPU6886), IR transmitter, microphone, buzzer, 200mAh battery, Wi-Fi and Bluetooth in a 48x24x13.5mm form factor. [Details](https://openhardware.directory/devices/m5stickc-plus-2) | [Markdown](https://openhardware.directory/devices/m5stickc-plus-2/md) ## M5Stack Core2 ESP32-based IoT dev kit with 2.0" IPS capacitive touch display, 16MB flash, 8MB PSRAM, built-in mic, speaker, IMU, vibration motor, and 390mAh battery in a compact stackable enclosure. [Details](https://openhardware.directory/devices/m5stack-core2) | [Markdown](https://openhardware.directory/devices/m5stack-core2/md) ## M5Stack AtomS3 Ultra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD (128x128), 6-axis IMU, 8MB flash, Wi-Fi, BLE 5.0, USB-C, and Grove port. Ideal for IoT prototyping and embedded UI projects. [Details](https://openhardware.directory/devices/m5stack-atoms3) | [Markdown](https://openhardware.directory/devices/m5stack-atoms3/md) ## Heltec WiFi LoRa 32 V4 ESP32-S3 based LoRa development board with built-in 0.96" OLED display, SX1262 LoRa transceiver, WiFi, BLE 5.0, USB-C, and LiPo battery charging. One of the most popular boards for Meshtastic. [Details](https://openhardware.directory/devices/heltec-wifi-lora-32-v4) | [Markdown](https://openhardware.directory/devices/heltec-wifi-lora-32-v4/md) ## ESP32-CAM ESP32-based camera dev board with OV2640 2MP sensor, microSD slot, WiFi, Bluetooth, 4MB flash, and 520KB SRAM. Ideal for DIY security cameras, timelapse, and computer vision projects. [Details](https://openhardware.directory/devices/esp32-cam) | [Markdown](https://openhardware.directory/devices/esp32-cam/md) ## WT32-ETH01 ESP32 module with built-in Ethernet (LAN8720A PHY), WiFi, and Bluetooth. Designed for wired IoT applications, gateways, and industrial automation where reliable network connectivity is essential. [Details](https://openhardware.directory/devices/wt32-eth01) | [Markdown](https://openhardware.directory/devices/wt32-eth01/md) ## SenseCAP Indicator D1 Dual-MCU IoT development platform featuring ESP32-S3 and RP2040 processors with a 4-inch capacitive touchscreen, WiFi, BLE, optional LoRa, and multiple Grove sensor connectors for IoT prototyping. [Details](https://openhardware.directory/devices/sensecap-indicator-d1) | [Markdown](https://openhardware.directory/devices/sensecap-indicator-d1/md) ## M5Stack Atom Echo Ultra-compact ESP32-PICO smart speaker dev kit (24x24mm) with built-in microphone, speaker, RGB LED, button, and Grove port. Ideal for voice assistant and audio streaming projects. [Details](https://openhardware.directory/devices/m5stack-atom-echo) | [Markdown](https://openhardware.directory/devices/m5stack-atom-echo/md) ## Seeed XIAO ESP32S3 Plus Ultra-compact ESP32-S3 development board with OV2640 camera, digital microphone, 8MB PSRAM, 8MB flash, WiFi 802.11 b/g/n, BLE 5.0, extended GPIO, and battery charging — ideal for AI and IoT edge projects. [Details](https://openhardware.directory/devices/xiao-esp32s3-plus) | [Markdown](https://openhardware.directory/devices/xiao-esp32s3-plus/md) ## M5Stack NanoC6 Ultra-compact ESP32-C6 dev board by M5Stack with WiFi 6, BLE 5.0, Zigbee 3.0, and Thread/Matter support. RISC-V single-core at 160MHz, USB-C, RGB LED, and button in a tiny form factor. [Details](https://openhardware.directory/devices/m5stack-nanoc6) | [Markdown](https://openhardware.directory/devices/m5stack-nanoc6/md) ## M5Stack Atom Matrix Ultra-compact ESP32-PICO dev board (24x24mm) with 5x5 RGB LED matrix, 6-axis IMU (MPU6886), IR LED, programmable button, and Grove port. Perfect for LED displays and motion sensing. [Details](https://openhardware.directory/devices/m5stack-atom-matrix) | [Markdown](https://openhardware.directory/devices/m5stack-atom-matrix/md) ## M5Stack AtomS3 Lite Ultra-compact ESP32-S3 dev board (24x24mm) by M5Stack without display. Features WiFi, BLE 5.0, 8MB flash, Grove port, RGB LED, button, and USB-C in a tiny enclosure for IoT and embedded projects. [Details](https://openhardware.directory/devices/m5stack-atoms3-lite) | [Markdown](https://openhardware.directory/devices/m5stack-atoms3-lite/md) ## DFRobot FireBeetle 2 ESP32-S3 AIoT Camera ESP32-S3 development board with integrated OV2640 camera, 16MB flash, 8MB PSRAM, WiFi and BLE connectivity. Designed for AIoT applications, computer vision, and edge AI projects. [Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-s3-aiot-camera) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-s3-aiot-camera/md) ## WT32-SC01 Plus ESP32-S3 development board with a 3.5" capacitive touch IPS LCD (480x320), 16MB flash, and 8MB PSRAM. Popular for building custom HMI/UI projects with LVGL, smart home panels, and IoT dashboards. [Details](https://openhardware.directory/devices/wt32-sc01-plus) | [Markdown](https://openhardware.directory/devices/wt32-sc01-plus/md) ## Waveshare ESP32-S3 Touch LCD 3.49 ESP32-S3 dev board with 3.49" capacitive touch IPS display, dual microphone array, 6-axis IMU, RTC, and battery support. Ideal for wearable UIs and compact IoT dashboards. [Details](https://openhardware.directory/devices/waveshare-esp32-s3-touch-lcd-3-49) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-s3-touch-lcd-3-49/md) ## Waveshare ESP32-S3 Touch LCD 7 ESP32-S3 dev board with 7" capacitive touch IPS display (800x480), CAN/RS485 interfaces, and battery support. Built for HMI panels, industrial control, and IoT dashboards. [Details](https://openhardware.directory/devices/waveshare-esp32-s3-touch-lcd-7) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-s3-touch-lcd-7/md) ## ESP32-S3 Nano Compact ESP32-S3 dev board by Waveshare in Arduino Nano form factor. Features dual-core 240MHz LX7, 16MB flash, 8MB PSRAM, WiFi, BLE 5.0, and USB-C. Drop-in ESP32-S3 upgrade for Nano-sized projects. [Details](https://openhardware.directory/devices/esp32-s3-nano) | [Markdown](https://openhardware.directory/devices/esp32-s3-nano/md) ## Denky D4 Open-source ESP32 Teleinfo reader board for French Linky energy meters. Pre-flashed with Tasmota, features USB-C, WiFi, QWIIC I2C port, and RGB LED. Reads both Standard and Historique TIC formats. [Details](https://openhardware.directory/devices/denky-d4) | [Markdown](https://openhardware.directory/devices/denky-d4/md) ## Waveshare RoArm-M1 ESP32-based 5-DOF desktop robotic arm with high-torque serial bus servos, WiFi/Bluetooth control, motion recording, inverse kinematics, and ROS 2 support. Carbon fiber and aluminum construction. [Details](https://openhardware.directory/devices/waveshare-roarm-m1) | [Markdown](https://openhardware.directory/devices/waveshare-roarm-m1/md) ## Raspberry Pi Pico W Wireless microcontroller board featuring the RP2040 dual-core Cortex-M0+ processor with built-in WiFi 4 and Bluetooth 5.2 (BLE). Supports MicroPython, CircuitPython, and C/C++ development. [Details](https://openhardware.directory/devices/raspberry-pi-pico-w) | [Markdown](https://openhardware.directory/devices/raspberry-pi-pico-w/md) ## Waveshare RP2040-Zero Ultra-compact RP2040 microcontroller board in a tiny form factor. Features dual-core Cortex-M0+ at 133 MHz, USB-C, onboard WS2812 RGB LED, and castellated pads. Raspberry Pi Pico compatible. [Details](https://openhardware.directory/devices/rp2040-zero) | [Markdown](https://openhardware.directory/devices/rp2040-zero/md) ## Waveshare RoArm-M2-S ESP32-based 4-DOF robotic arm with 360-degree base rotation, 500g payload at 300mm reach, dual-drive shoulder joint, 9-axis IMU, and ROS 2 + LeRobot compatibility. Under 850g total weight. [Details](https://openhardware.directory/devices/waveshare-roarm-m2-s) | [Markdown](https://openhardware.directory/devices/waveshare-roarm-m2-s/md) ## LOLIN D1 Mini V3 Compact WiFi development board based on the ESP8266-12F module. Features 4 MB flash, 11 digital I/O pins, Micro-USB, and a rich shield ecosystem. One of the most popular boards for IoT projects. [Details](https://openhardware.directory/devices/d1-mini-v3) | [Markdown](https://openhardware.directory/devices/d1-mini-v3/md) ## Waveshare RoArm-M3 ESP32-based 5+1 DOF robotic arm with 1kg payload, 360-degree base, dual-drive shoulder, 7 servos, 9-axis IMU, TF card slot, and ROS 2 + LeRobot support. Carbon fiber and aluminum build. [Details](https://openhardware.directory/devices/waveshare-roarm-m3) | [Markdown](https://openhardware.directory/devices/waveshare-roarm-m3/md) ## Blue Pill STM32F103C8T6 Popular low-cost development board based on the STM32F103C8T6 ARM Cortex-M3 microcontroller running at 72 MHz. Features 64 KB flash, 20 KB SRAM, and extensive peripheral support for embedded development. [Details](https://openhardware.directory/devices/blue-pill-stm32) | [Markdown](https://openhardware.directory/devices/blue-pill-stm32/md) ## DFRobot Maqueen Plus V3 Advanced micro:bit STEM robot with 8x8 matrix laser ranging, 5 line-tracking sensors with intersection recognition, magnetic encoders, PID control, and 6 RGB LEDs. Programmable via MakeCode and MicroPython. [Details](https://openhardware.directory/devices/dfrobot-maqueen-plus-v3) | [Markdown](https://openhardware.directory/devices/dfrobot-maqueen-plus-v3/md) ## DFRobot Maixduino AI Development Kit RISC-V AI development board combining the Kendryte K210 AI processor with ESP32 for WiFi/BT connectivity. Includes camera and microphone for computer vision and voice recognition applications. [Details](https://openhardware.directory/devices/dfrobot-maixduino) | [Markdown](https://openhardware.directory/devices/dfrobot-maixduino/md) ## ESP8266 ESP-01S WiFi Module Compact ESP8266-based WiFi dev board with 1MB flash, 2 GPIO pins, and 802.11 b/g/n. Runs Arduino, MicroPython, ESPHome, and Tasmota firmware for smart home and IoT projects. [Details](https://openhardware.directory/devices/esp8266-esp-01s) | [Markdown](https://openhardware.directory/devices/esp8266-esp-01s/md) ## Wemos D1 Mini (ESP8266) Compact ESP8266-based WiFi development board with 4MB flash, 11 digital I/O pins, micro-USB, and a rich shield ecosystem. The most popular board for Tasmota and ESPHome DIY home automation projects. [Details](https://openhardware.directory/devices/wemos-d1-mini-esp8266) | [Markdown](https://openhardware.directory/devices/wemos-d1-mini-esp8266/md) ## Olimex ESP32-POE Open-source ESP32 development board with built-in Ethernet, Power-over-Ethernet support, micro-SD card slot, and LiPo battery connector. Ideal for wired Tasmota nodes and industrial IoT applications. [Details](https://openhardware.directory/devices/olimex-esp32-poe) | [Markdown](https://openhardware.directory/devices/olimex-esp32-poe/md) ## makerdiary nRF52840-MDK USB Dongle Open-source multi-protocol wireless USB dongle based on the Nordic nRF52840 SoC. Supports BLE 5.4, Thread, Zigbee, 802.15.4, NFC, and USB 2.0 with UF2 drag-and-drop bootloader. Priced at $12.99. [Details](https://openhardware.directory/devices/makerdiary-nrf52840-mdk-usb-dongle) | [Markdown](https://openhardware.directory/devices/makerdiary-nrf52840-mdk-usb-dongle/md) ## BeagleConnect Freedom Open-source wireless IoT board with TI CC1352P7 dual-band radio (sub-GHz + 2.4 GHz), BLE 5.0, two mikroBUS sockets for 1,000+ Click boards, and Zephyr RTOS. Designed for long-range wireless sensor networks up to 1 km. [Details](https://openhardware.directory/devices/beagleconnect-freedom) | [Markdown](https://openhardware.directory/devices/beagleconnect-freedom/md) ## Waveshare ESP32-C6-GEEK Compact USB-A dongle development board with ESP32-C6 RISC-V MCU, 1.14\" IPS LCD, WiFi 6, BLE 5.0, Zigbee 3.0, Thread, and microSD slot for portable IoT projects. [Details](https://openhardware.directory/devices/waveshare-esp32-c6-geek) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-c6-geek/md) ## Waveshare UGV Rover Open-source 6-wheel 4WD AI robot platform with dual-controller architecture (ESP32 + Raspberry Pi), computer vision, pan-tilt camera, ESP-NOW communication, and ROS2 support for robotics education and autonomous navigation. [Details](https://openhardware.directory/devices/waveshare-ugv-rover) | [Markdown](https://openhardware.directory/devices/waveshare-ugv-rover/md) ## Waveshare WAVE ROVER Flexible 4WD mobile robot chassis with all-metal body, ESP32 controller, 0.91\" OLED, 9-axis IMU, 3S UPS power system, and open-source firmware. Supports Raspberry Pi and Jetson Nano as host computers. [Details](https://openhardware.directory/devices/waveshare-wave-rover) | [Markdown](https://openhardware.directory/devices/waveshare-wave-rover/md) ## Waveshare RaspRover Open-source 4WD AI robot with dual-controller architecture (ESP32 + Raspberry Pi), 5MP 160-degree camera, pan-tilt module, audio system, computer vision via OpenCV/MediaPipe, and ROS2 support for AI robotics education. [Details](https://openhardware.directory/devices/waveshare-rasprover) | [Markdown](https://openhardware.directory/devices/waveshare-rasprover/md) ## DFRobot FireBeetle 2 ESP32-C6 Low-cost ESP32-C6 IoT board with WiFi 6, BLE 5, Thread, Zigbee, Matter, solar panel charging with MPPT, and ultra-low 16µA deep sleep — for $5.90. [Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-c6) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-c6/md) ## DFRobot Beetle ESP32-C6 Coin-sized (25×20.5mm) ESP32-C6 wearable dev board with WiFi 6, BLE 5, Thread, Zigbee, Matter, integrated LiPo charger, and 14µA deep sleep — for $4.90. [Details](https://openhardware.directory/devices/dfrobot-beetle-esp32-c6) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-esp32-c6/md) ## Seeed Studio XIAO ESP32C6 Thumb-sized (21×17.8mm) Matter/Thread/Zigbee/WiFi 6/BLE 5.3 dev board with dual RISC-V cores, onboard antenna, 15µA deep sleep, and hardware security — for ~$5. [Details](https://openhardware.directory/devices/seeed-xiao-esp32c6) | [Markdown](https://openhardware.directory/devices/seeed-xiao-esp32c6/md) ## Adafruit ESP32-C6 Feather Open-source Feather-form-factor ESP32-C6 board with WiFi 6, BLE 5, Thread, Zigbee, STEMMA QT, NeoPixel, LiPo charging with MAX17048, and CircuitPython support — $14.95. [Details](https://openhardware.directory/devices/adafruit-esp32-c6-feather) | [Markdown](https://openhardware.directory/devices/adafruit-esp32-c6-feather/md) ## Adafruit QT Py RP2040 Tiny RP2040-based dev board in the QT Py / Seeed XIAO form factor, featuring 8MB flash, USB-C, a NeoPixel, and a STEMMA QT connector for solderless I2C sensor wiring. [Details](https://openhardware.directory/devices/adafruit-qt-py-rp2040) | [Markdown](https://openhardware.directory/devices/adafruit-qt-py-rp2040/md) ## FeatherS2 Neo ESP32-S2 ESP32-S2 Feather-format board by Unexpected Maker with 4MB flash, 2MB PSRAM, 5×5 RGB LED matrix, LiPo charging, and STEMMA QT — designed for colorful wearable and IoT projects. [Details](https://openhardware.directory/devices/feathers2-neo) | [Markdown](https://openhardware.directory/devices/feathers2-neo/md) ## Adafruit Feather RP2040 SCORPIO RP2040 Feather board with 8 consecutive 5V-level-shifted PIO outputs dedicated to NeoPixel LED strip control, 8MB flash, USB-C, and LiPo charging. [Details](https://openhardware.directory/devices/adafruit-feather-rp2040-scorpio) | [Markdown](https://openhardware.directory/devices/adafruit-feather-rp2040-scorpio/md) ## Pycom Pytrack GPS/GNSS tracking expansion board for Pycom modules with GLONASS/Galileo/QZSS support, 3-axis accelerometer, MicroSD slot, LiPo charger, USB serial, and 5 extra GPIO headers. Ultra-low 1µA deep sleep current. [Details](https://openhardware.directory/devices/pycom-pytrack) | [Markdown](https://openhardware.directory/devices/pycom-pytrack/md) ## Pycom Pysense Multi-sensor expansion board for Pycom modules featuring light, barometric pressure, humidity, temperature, and 3-axis accelerometer sensors. Includes MicroSD slot, USB serial, LiPo charger, and ultra-low 1µA deep sleep. [Details](https://openhardware.directory/devices/pycom-pysense) | [Markdown](https://openhardware.directory/devices/pycom-pysense/md) ## BBC micro:bit v1 Pocket-sized educational microcontroller with nRF51822, 5×5 LED matrix, accelerometer, magnetometer, Bluetooth LE, 2 buttons, and 19 I/O pins. Designed for teaching coding to children and beginners via MakeCode or MicroPython. [Details](https://openhardware.directory/devices/bbc-microbit-v1) | [Markdown](https://openhardware.directory/devices/bbc-microbit-v1/md) ## Raspberry Pi Pico 2W The Raspberry Pi Pico 2W is a wireless microcontroller board built on the RP2350 chip, delivering dual Cortex-M33 or RISC-V cores at 150MHz with 2.4GHz WiFi 4 (WPA3), Bluetooth 5.2, and 4MB flash — a major step up from the RP2040-based Pico W. [Details](https://openhardware.directory/devices/raspberry-pi-pico-2w) | [Markdown](https://openhardware.directory/devices/raspberry-pi-pico-2w/md) ## ESP32-C6-DevKitC-1-N8 Espressif reference development board for the ESP32-C6 with 8MB flash, Wi-Fi 6, Bluetooth 5 LE, Zigbee 3.0, Thread, RGB LED, dual USB-C ports, and full GPIO breakout. [Details](https://openhardware.directory/devices/esp32-c6-devkitc-1-n8) | [Markdown](https://openhardware.directory/devices/esp32-c6-devkitc-1-n8/md) ## Adafruit Feather RP2040 with DVI Output RP2040 Feather board with a DVI/HDMI-compatible output port for driving displays at up to 800×480, plus LiPo charging, USB-C, NeoPixel, and STEMMA QT. [Details](https://openhardware.directory/devices/adafruit-feather-rp2040-dvi) | [Markdown](https://openhardware.directory/devices/adafruit-feather-rp2040-dvi/md) ## TinyS2 ESP32-S2 Ultra-compact ESP32-S2 development board by Unexpected Maker in the TinyPICO form factor, with 4 MB flash, 2 MB PSRAM, native USB, WiFi, and LiPo charging at just 17.8 × 41 mm. [Details](https://openhardware.directory/devices/tinys2-esp32-s2) | [Markdown](https://openhardware.directory/devices/tinys2-esp32-s2/md) ## Pycom SiPy ESP32-based MicroPython development board with WiFi, Bluetooth LE, and +22dBm SigFox radio (RCZ2/RCZ4). Breadboard-compatible with ultra-low power modes, ideal for long-range sub-GHz IoT deployments. [Details](https://openhardware.directory/devices/pycom-sipy) | [Markdown](https://openhardware.directory/devices/pycom-sipy/md) ## Adafruit Feather STM32F405 Express High-speed Feather-form-factor dev board with STM32F405 ARM Cortex-M4F @ 168MHz, 1MB Flash, 192KB RAM, 2MB SPI Flash, USB-C, STEMMA QT, SD card socket, and LiPo charging. Adafruit's fastest CircuitPython board. [Details](https://openhardware.directory/devices/adafruit-feather-stm32f405-express) | [Markdown](https://openhardware.directory/devices/adafruit-feather-stm32f405-express/md) ## Adafruit Metro RP2350 with PSRAM The Adafruit Metro RP2350 with PSRAM is an Arduino Uno–footprint development board powered by the RP2350 chip, featuring 16MB flash, 520KB SRAM, and 8MB QSPI PSRAM for expanded dynamic memory — ideal for data-intensive CircuitPython and C/C++ projects. [Details](https://openhardware.directory/devices/adafruit-metro-rp2350-psram) | [Markdown](https://openhardware.directory/devices/adafruit-metro-rp2350-psram/md) ## Adafruit Feather RP2040 RFM69 868/915 MHz RP2040 Feather with integrated RFM69HCW 868/915 MHz packet radio transceiver, 8MB flash, LiPo charging, STEMMA QT, and uFL antenna connector for long-range wireless mesh networks. [Details](https://openhardware.directory/devices/adafruit-feather-rp2040-rfm69) | [Markdown](https://openhardware.directory/devices/adafruit-feather-rp2040-rfm69/md) ## Adafruit Feather RP2040 with RFM95 LoRa 915 MHz RP2040 Feather with integrated RFM95W LoRa radio at 915 MHz (SX1276), 8MB flash, up to 20 km range, LiPo charging, STEMMA QT, and uFL antenna connector. [Details](https://openhardware.directory/devices/adafruit-feather-rp2040-rfm95) | [Markdown](https://openhardware.directory/devices/adafruit-feather-rp2040-rfm95/md) ## Pycom GPy ESP32-based triple-network MicroPython board with WiFi 802.11 b/g/n, Bluetooth LE, and LTE CAT-M1/NB1 cellular. 4MB RAM, 8MB flash, 22 GPIO, breadboard-compatible. Ideal for global LTE IoT deployments. [Details](https://openhardware.directory/devices/pycom-gpy) | [Markdown](https://openhardware.directory/devices/pycom-gpy/md) ## ESP32-S3 Box Espressif AIoT development kit with ESP32-S3, a 2.4″ 320×240 capacitive touchscreen, dual microphones, speaker, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, and Pmod expansion. [Details](https://openhardware.directory/devices/esp32-s3-box) | [Markdown](https://openhardware.directory/devices/esp32-s3-box/md) ## Pycom FiPy Five-network ESP32 MicroPython board with WiFi, Bluetooth LE, LoRa, SigFox, and dual LTE-M (CAT-M1/NB1). 4MB RAM, 8MB flash, 22 GPIO. The most connected Pycom module for versatile LPWAN IoT applications. [Details](https://openhardware.directory/devices/pycom-fipy) | [Markdown](https://openhardware.directory/devices/pycom-fipy/md) ## Raspberry Pi Pico 2 The Raspberry Pi Pico 2 is an RP2350-based microcontroller board with dual ARM Cortex-M33 or RISC-V Hazard3 cores at 150MHz, 520KB SRAM, and 4MB flash. It doubles the RAM and flash of the original Pico while retaining pin compatibility — available with or without pre-soldered headers. [Details](https://openhardware.directory/devices/raspberry-pi-pico-2) | [Markdown](https://openhardware.directory/devices/raspberry-pi-pico-2/md) ## Adafruit Feather RP2040 with USB Type A Host RP2040 Feather with a dedicated USB Type-A host port powered by a 5V boost converter, enabling connection to USB devices like keyboards, mice, and MIDI controllers alongside standard USB-C programming. [Details](https://openhardware.directory/devices/adafruit-feather-rp2040-usb-host) | [Markdown](https://openhardware.directory/devices/adafruit-feather-rp2040-usb-host/md) ## ProS3[D] ESP32-S3 by Unexpected Maker The ProS3[D] is Unexpected Maker's flagship ESP32-S3 development board featuring a dual antenna system (onboard 3D high-gain + u.FL for external), an I2C battery fuel gauge, 16MB flash, 8MB PSRAM, dual 700mA LDOs, and STEMMA QT — with software-switchable RF routing. [Details](https://openhardware.directory/devices/pros3d-esp32-s3) | [Markdown](https://openhardware.directory/devices/pros3d-esp32-s3/md) ## FeatherS3[D] ESP32-S3 by Unexpected Maker The FeatherS3[D] is Unexpected Maker's Feather-form ESP32-S3 board with a dual antenna system (onboard + u.FL, software-switchable), I2C battery fuel gauge, 16MB flash, 8MB PSRAM, two STEMMA QT connectors, and LiPo charging — all in the standard Adafruit Feather footprint. [Details](https://openhardware.directory/devices/feathers3d-esp32-s3) | [Markdown](https://openhardware.directory/devices/feathers3d-esp32-s3/md) ## Adafruit My Little Hacker ESP32-S2 Child-oriented ESP32-S2 dev board with 4MB flash, 2MB PSRAM, 5 NeoPixels, microSD, I2S audio amplifier for speakers, USB-C, STEMMA QT, and AA battery or USB-C power support. [Details](https://openhardware.directory/devices/adafruit-my-little-hacker-esp32-s2) | [Markdown](https://openhardware.directory/devices/adafruit-my-little-hacker-esp32-s2/md) ## Pycom LoPy4 ESP32-based quad-network MicroPython board with WiFi, Bluetooth LE, LoRa (SX1276 868/915/433MHz), and SigFox. 4MB PSRAM, 8MB flash, 24 GPIO. Can function as a nano LoRa gateway. FCC/CE certified. [Details](https://openhardware.directory/devices/pycom-lopy4) | [Markdown](https://openhardware.directory/devices/pycom-lopy4/md) ## TinyS3 ESP32-S3 with u.FL Ultra-compact ESP32-S3 board by Unexpected Maker in TinyPICO form factor with u.FL external antenna connector, 8MB flash, 8MB PSRAM, LiPo charging, and dual-core 240 MHz. [Details](https://openhardware.directory/devices/tinys3-esp32-s3-ufl) | [Markdown](https://openhardware.directory/devices/tinys3-esp32-s3-ufl/md) ## TinyS3[D] ESP32-S3 by Unexpected Maker The TinyS3[D] is Unexpected Maker's ultra-compact ESP32-S3 board in the TinyPICO form factor, featuring a dual antenna system (onboard + u.FL, software-switchable), I2C battery fuel gauge, 8MB flash, 8MB PSRAM, LiPo charging, and 17 GPIO pins — all in a tiny castellated module. [Details](https://openhardware.directory/devices/tinys3d-esp32-s3) | [Markdown](https://openhardware.directory/devices/tinys3d-esp32-s3/md) ## FeatherS3 ESP32-S3 with u.FL Unexpected Maker's pro ESP32-S3 Feather board with u.FL external antenna connector, 16MB flash, 8MB PSRAM, dual STEMMA QT connectors, LiPo charging, and dual 700mA regulators. [Details](https://openhardware.directory/devices/feathers3-esp32-s3-ufl) | [Markdown](https://openhardware.directory/devices/feathers3-esp32-s3-ufl/md) ## ESP32-S3-DevKitC-1 Espressif official ESP32-S3 development board with ESP32-S3-WROOM-1 module, dual-core 240 MHz LX7, up to 45 GPIO, dual USB ports, and available in three memory variants: 8MB/2MB PSRAM, 8MB/8MB PSRAM, and 32MB/16MB PSRAM (WROOM-2). [Details](https://openhardware.directory/devices/esp32-s3-devkitc-1) | [Markdown](https://openhardware.directory/devices/esp32-s3-devkitc-1/md) ## Adafruit HUZZAH ESP8266 Breakout Breadboard-friendly ESP8266 WiFi breakout at 80 MHz with 802.11 b/g/n, 9 GPIO, 3.3V logic, 500mA regulator, and pre-loaded NodeMCU firmware — Adafruit's accessible entry point to ESP8266 development. [Details](https://openhardware.directory/devices/adafruit-huzzah-esp8266) | [Markdown](https://openhardware.directory/devices/adafruit-huzzah-esp8266/md) ## Raspberry Pi Zero WH Raspberry Pi Zero W with pre-soldered 40-pin GPIO headers. BCM2835 single-core 1GHz ARM11, 512MB RAM, built-in 802.11 b/g/n WiFi (BCM43143), Bluetooth LE, Mini HDMI, Micro USB, and MicroSD. No soldering required. [Details](https://openhardware.directory/devices/raspberry-pi-zero-wh) | [Markdown](https://openhardware.directory/devices/raspberry-pi-zero-wh/md) ## ProS3 ESP32-S3 with u.FL Unexpected Maker's ProS3 ESP32-S3 with u.FL external antenna, 16MB flash, 8MB PSRAM, 27 GPIO castellated headers, dual LDO regulators, LiPo charging, and STEMMA QT. [Details](https://openhardware.directory/devices/pros3-esp32-s3-ufl) | [Markdown](https://openhardware.directory/devices/pros3-esp32-s3-ufl/md) ## ESP32-S3-DevKitM-1 Espressif official ESP32-S3 development board using the compact ESP32-S3-MINI-1 module, with dual-core 240 MHz LX7, 8 MB flash, up to 45 GPIO, dual USB ports, and smaller footprint than the WROOM-1. [Details](https://openhardware.directory/devices/esp32-s3-devkitm-1) | [Markdown](https://openhardware.directory/devices/esp32-s3-devkitm-1/md) ## Adafruit Metro RP2040 Arduino-Uno-compatible development board powered by the RP2040 with 16MB QSPI flash, microSD slot, STEMMA QT, onboard NeoPixel, USB-C, and an RX/TX switch for serial flexibility. [Details](https://openhardware.directory/devices/adafruit-metro-rp2040) | [Markdown](https://openhardware.directory/devices/adafruit-metro-rp2040/md) ## ESP32-S2 Saola 1R Dev Kit Espressif official ESP32-S2-WROVER development board with dual 20-pin headers (breadboard-friendly), 8MB Flash, 2MB PSRAM, WiFi, dual Micro-USB (native USB + UART bridge), NeoPixel RGB LED, and boot/reset buttons. [Details](https://openhardware.directory/devices/esp32-s2-saola-1r-dev-kit) | [Markdown](https://openhardware.directory/devices/esp32-s2-saola-1r-dev-kit/md) ## ESP32-C3 DevKitM-01 Espressif official RISC-V ESP32-C3 dev board with ESP32-C3-MINI-1 module, 4 MB embedded SPI Flash, WiFi 4, BLE 5, Micro-USB, RGB LED, and a compact footprint for IoT prototyping. [Details](https://openhardware.directory/devices/esp32-c3-devkitm-01) | [Markdown](https://openhardware.directory/devices/esp32-c3-devkitm-01/md) ## FeatherS2 ESP32-S2 Full-featured ESP32-S2 Feather-compatible board by Unexpected Maker with 16MB Flash, 8MB QSPI PSRAM, WiFi, native USB-C, 21 GPIO, STEMMA QT, APA102 RGB LED, ambient light sensor, and dual 700mA LDOs. [Details](https://openhardware.directory/devices/feathers2-esp32-s2) | [Markdown](https://openhardware.directory/devices/feathers2-esp32-s2/md) ## Adafruit QT Py ESP32 Pico QT Py-sized classic ESP32 board with ESP32-PICO-V3-02, 8 MB flash, 2 MB PSRAM, WiFi, dual-core, Bluetooth Classic + BLE, STEMMA QT, and 13 GPIO — without native USB. [Details](https://openhardware.directory/devices/adafruit-qt-py-esp32-pico) | [Markdown](https://openhardware.directory/devices/adafruit-qt-py-esp32-pico/md) ## TinyS3 ESP32-S3 Ultra-compact ESP32-S3 dev board by Unexpected Maker in the TinyPICO form factor — dual-core 240 MHz LX7, 8 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 17 GPIO, LiPo charging at 35 × 17.8 mm. [Details](https://openhardware.directory/devices/tinys3-esp32-s3) | [Markdown](https://openhardware.directory/devices/tinys3-esp32-s3/md) ## Adafruit ItsyBitsy ESP32 PCB Antenna Compact ItsyBitsy-format ESP32 board with 8MB flash, 2MB PSRAM, PCB antenna, Wi-Fi + Bluetooth Classic + BLE, 20 GPIO, NeoPixel, STEMMA QT, and Micro-B USB. [Details](https://openhardware.directory/devices/adafruit-itsybitsy-esp32-pcb) | [Markdown](https://openhardware.directory/devices/adafruit-itsybitsy-esp32-pcb/md) ## Pycom WiPy 3.0 ESP32-based MicroPython IoT module with 802.11b/g/n WiFi, Bluetooth LE and Classic, 8MB flash, 4MB RAM, and ultra-low power ULP co-processor for deep-sleep GPIO monitoring at 25 µA. [Details](https://openhardware.directory/devices/pycom-wipy-30) | [Markdown](https://openhardware.directory/devices/pycom-wipy-30/md) ## FeatherS3 ESP32-S3 Pro ESP32-S3 Feather-form-factor board by Unexpected Maker — dual-core 240 MHz LX7, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 21 GPIO, 2× STEMMA connectors, dual LDOs, LiPo charging. [Details](https://openhardware.directory/devices/feathers3-esp32-s3) | [Markdown](https://openhardware.directory/devices/feathers3-esp32-s3/md) ## Adafruit Feather HUZZAH ESP8266 All-in-one ESP8266 WiFi Feather board at 80 MHz with 802.11 b/g/n, USB-serial (CP2104), LiPo charging, 9 GPIO, and 4MB flash — the easiest way to add WiFi to a portable battery-powered project. [Details](https://openhardware.directory/devices/adafruit-feather-huzzah-esp8266) | [Markdown](https://openhardware.directory/devices/adafruit-feather-huzzah-esp8266/md) ## Adafruit ItsyBitsy ESP32 wFL Antenna Compact ItsyBitsy-format ESP32 board with 8MB flash, 2MB PSRAM, w.FL external antenna connector, Wi-Fi + Bluetooth Classic + BLE, 20 GPIO, NeoPixel, STEMMA QT, and Micro-B USB. [Details](https://openhardware.directory/devices/adafruit-itsybitsy-esp32-wfl) | [Markdown](https://openhardware.directory/devices/adafruit-itsybitsy-esp32-wfl/md) ## Pycom LoPy 1.0 ESP32-based MicroPython module combining 802.11b/g/n WiFi, Bluetooth, and LoRa/LoRaWAN (868/915 MHz) in one board. Can act as a nano LoRa gateway and is 100% Python programmable for multi-protocol IoT deployments. [Details](https://openhardware.directory/devices/pycom-lopy-10) | [Markdown](https://openhardware.directory/devices/pycom-lopy-10/md) ## BBC micro:bit v2 Upgraded BBC micro:bit with Nordic nRF52833 Cortex-M4F, Bluetooth 5.1, 5×5 LED matrix, 2 buttons, capacitive touch logo, built-in speaker and MEMS microphone, edge connector, and low-power mode. Same form factor as v1. [Details](https://openhardware.directory/devices/bbc-micro-bit-v2) | [Markdown](https://openhardware.directory/devices/bbc-micro-bit-v2/md) ## ProS3 ESP32-S3 Unexpected Maker's ultimate ESP32-S3 dev board — dual-core 240 MHz LX7, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 27 GPIO, 2× LDOs, castellated headers, STEMMA, LiPo charging, JTAG. [Details](https://openhardware.directory/devices/pros3-esp32-s3) | [Markdown](https://openhardware.directory/devices/pros3-esp32-s3/md) ## Adafruit Metro RP2350 Arduino-Uno-compatible board with RP2350, dual ARM Cortex-M33 at 150 MHz, 520KB SRAM, 16MB QSPI flash, microSD, HSTX port, 23 GPIO on headers, NeoPixel, STEMMA QT, and USB-C. [Details](https://openhardware.directory/devices/adafruit-metro-rp2350) | [Markdown](https://openhardware.directory/devices/adafruit-metro-rp2350/md) ## Adafruit QT Py ESP32-C3 Tiny RISC-V ESP32-C3 dev board in the QT Py / Seeed XIAO footprint with 4 MB flash, WiFi, BLE 5 with Mesh, STEMMA QT, 13 GPIO, 5 ADC inputs, and USB-C — no native USB. [Details](https://openhardware.directory/devices/adafruit-qt-py-esp32-c3) | [Markdown](https://openhardware.directory/devices/adafruit-qt-py-esp32-c3/md) ## Arduino Zero 32-bit ARM Cortex-M0+ Arduino in UNO form factor with ATSAMD21G18 at 48 MHz, 256KB flash, 32KB SRAM, onboard EDBG debugger, dual USB ports, 12-bit ADC/DAC — designed for IoT, wearables, and robotics. [Details](https://openhardware.directory/devices/arduino-zero) | [Markdown](https://openhardware.directory/devices/arduino-zero/md) ## Adafruit HUZZAH32 ESP32 Breakout Minimal ESP32 breakout board with dual-core Xtensa LX6 at 240MHz, 520KB SRAM, 4MB flash, WiFi 802.11 b/g/n, Bluetooth Classic + BLE, 12 ADC, 2 DAC. No USB converter or battery charger — requires external FTDI/CP2104 for programming. [Details](https://openhardware.directory/devices/adafruit-huzzah32-esp32-breakout) | [Markdown](https://openhardware.directory/devices/adafruit-huzzah32-esp32-breakout/md) ## ESP32-S3 Box Lite Espressif AIoT dev kit — ESP32-S3, 2.4″ 320×240 display, dual MEMS microphones, speaker, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, Pmod expansion — the dock-free Lite sibling of the ESP32-S3 Box. [Details](https://openhardware.directory/devices/esp32-s3-box-lite) | [Markdown](https://openhardware.directory/devices/esp32-s3-box-lite/md) ## ESP32-S2 WROOM Module The ESP32-S2 WROOM is an Espressif WiFi module with a single-core Xtensa LX7 at 240MHz, 4MB flash, 320KB SRAM, built-in PCB antenna, native USB OTG, and rich peripheral support — a cost-effective WiFi-only module (no Bluetooth) with USB capabilities for IoT and embedded designs. [Details](https://openhardware.directory/devices/esp32-s2-wroom-module) | [Markdown](https://openhardware.directory/devices/esp32-s2-wroom-module/md) ## Adafruit Feather RP2040 Feather-form-factor board with Raspberry Pi RP2040 dual-core Cortex-M0+ @ 133MHz, 264KB SRAM, 8MB Flash, 21 GPIO, 4 ADC, 2 PIO peripherals, USB-C with UF2 bootloader, STEMMA QT, and LiPo charging. Runs CircuitPython and MicroPython. [Details](https://openhardware.directory/devices/adafruit-feather-rp2040) | [Markdown](https://openhardware.directory/devices/adafruit-feather-rp2040/md) ## Adafruit ItsyBitsy RP2040 Tiny 36×18mm breadboard-friendly board with Raspberry Pi RP2040 dual-core Cortex-M0+ @ 133MHz, 264KB SRAM, 8MB Flash, 23 GPIO, 4 ADC, 2 PIO peripherals, and Micro-USB. Runs CircuitPython and MicroPython. [Details](https://openhardware.directory/devices/adafruit-itsybitsy-rp2040) | [Markdown](https://openhardware.directory/devices/adafruit-itsybitsy-rp2040/md) ## Adafruit HUZZAH32 – ESP32 Feather ESP32 dual-core 240 MHz Feather board with 802.11b/g/n WiFi, Bluetooth 4.2 Classic and BLE, 4MB flash, 520KB SRAM, 12 ADC channels, 2 DACs, capacitive touch, and built-in LiPo charger. [Details](https://openhardware.directory/devices/adafruit-huzzah32-esp32) | [Markdown](https://openhardware.directory/devices/adafruit-huzzah32-esp32/md) ## ESP32-C6 DevKitC-1-N8 Official Espressif development board featuring the ESP32-C6 — a RISC-V single-core MCU with WiFi 6, BLE 5.0, Zigbee 3.0, Thread 1.3, and native Matter support. 8MB flash, USB-C JTAG/serial. [Details](https://openhardware.directory/devices/esp32-c6-devkitc-1) | [Markdown](https://openhardware.directory/devices/esp32-c6-devkitc-1/md) ## Pycom LoPy The Pycom LoPy is a compact triple-network MicroPython-programmable board featuring ESP32 with built-in WiFi, BLE 4.2, and LoRa (SX1272) on 868/915 MHz — ideal for IoT mesh networking and asset tracking. [Details](https://openhardware.directory/devices/pycom-lopy) | [Markdown](https://openhardware.directory/devices/pycom-lopy/md) ## Adafruit ItsyBitsy ESP32 Ultra-compact ESP32 development board in the ItsyBitsy form factor with WiFi, Bluetooth Classic + BLE, USB-C, and LiPo charging — perfect for space-constrained wireless projects. [Details](https://openhardware.directory/devices/adafruit-itsybitsy-esp32) | [Markdown](https://openhardware.directory/devices/adafruit-itsybitsy-esp32/md) ## Pycom WiPy 3.0 The Pycom WiPy 3.0 is a compact MicroPython-programmable ESP32 board with WiFi 802.11 b/g/n and Bluetooth BLE 4.2, designed for low-power wireless IoT applications and smart-home prototyping. [Details](https://openhardware.directory/devices/pycom-wipy-3) | [Markdown](https://openhardware.directory/devices/pycom-wipy-3/md) ## Adafruit HUZZAH32 ESP32 Feather Board Adafruit's Feather-format ESP32 board with dual-core Xtensa LX6 @ 240MHz, WiFi b/g/n, Bluetooth Classic + BLE 4.2, built-in LiPo charger, and Feather-compatible pin layout. Great all-around wireless IoT platform. [Details](https://openhardware.directory/devices/adafruit-huzzah32-esp32-feather) | [Markdown](https://openhardware.directory/devices/adafruit-huzzah32-esp32-feather/md) ## Adafruit Feather ESP32-S3 Feather-format ESP32-S3 board with native USB, WiFi, BLE 5.0, 8MB flash, LiPo charging, and full Feather ecosystem compatibility — a capable wireless development platform for CircuitPython and Arduino projects. [Details](https://openhardware.directory/devices/adafruit-feather-esp32-s3) | [Markdown](https://openhardware.directory/devices/adafruit-feather-esp32-s3/md) ## M5Stack FIRE V2.7 Feature-rich ESP32 IoT dev kit with 2.0" IPS display, 8MB PSRAM, 16MB flash, MPU6886 IMU, BMM150 magnetometer, 10x SK6812 RGB LEDs, microphone, speaker, microSD, 500mAh battery, and M5GO charging base. [Details](https://openhardware.directory/devices/m5stack-fire-v2-7) | [Markdown](https://openhardware.directory/devices/m5stack-fire-v2-7/md) ## M5Stack Basic Core V2.7 Compact ESP32 IoT dev kit with 2.0" IPS LCD (320x240), 16MB flash, microSD, speaker, 110mAh battery, and three Grove ports in a stackable 54mm square enclosure. [Details](https://openhardware.directory/devices/m5stack-basic-core-v2-7) | [Markdown](https://openhardware.directory/devices/m5stack-basic-core-v2-7/md) ## Heltec WiFi Kit 8 ESP8266-based IoT development board by Heltec with built-in 0.91-inch OLED display, Li-Po battery management, and WiFi connectivity in a compact 50.9x18.2mm form factor. [Details](https://openhardware.directory/devices/heltec-wifi-kit-8) | [Markdown](https://openhardware.directory/devices/heltec-wifi-kit-8/md) ## M5Stack CoreS3 Lite ESP32-S3 IoT controller with 2.0" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, 200mAh battery, and Grove expansion ports. [Details](https://openhardware.directory/devices/m5stack-cores3-lite) | [Markdown](https://openhardware.directory/devices/m5stack-cores3-lite/md) ## M5Stack Station-Bat Industrial ESP32 controller with 1.14" IPS LCD, 6 Grove ports, INA3221 power monitor, MPU6886 IMU, RTC, 7x SK6812 LEDs, dual 18650 battery holders, USB-A power output, and 16MB flash. [Details](https://openhardware.directory/devices/m5stack-station-bat) | [Markdown](https://openhardware.directory/devices/m5stack-station-bat/md) ## M5Stack StamPLC ESP32-S3 industrial PLC controller with 1.14" IPS LCD, 4 relays, 8 opto-isolated inputs, RS-485, CAN bus, INA226 power monitor, RTC, buzzer, microSD, and DIN-rail mounting in a compact enclosure. [Details](https://openhardware.directory/devices/m5stack-stamplc) | [Markdown](https://openhardware.directory/devices/m5stack-stamplc/md) ## M5Stack AtomS3R Ultra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD, BMI270 IMU, BMM150 magnetometer, 8MB PSRAM, IR transmitter, LP5562 RGB LED driver, and Grove port for IoT and robotics. [Details](https://openhardware.directory/devices/m5stack-atoms3r) | [Markdown](https://openhardware.directory/devices/m5stack-atoms3r/md) ## Heltec ESP32-C3 Arduino Development Board Ultra-compact RISC-V development board with ESP32-C3FN4, WiFi, BLE 5.0, integrated battery management, and USB-C — ideal for low-power IoT sensor nodes and wireless prototyping. [Details](https://openhardware.directory/devices/heltec-esp32-c3) | [Markdown](https://openhardware.directory/devices/heltec-esp32-c3/md) ## Heltec Vision Master T190 ESP32-S3 development board with optional SX1262 LoRa module and 1.9-inch TFT color display. Supports Meshtastic, LoRaWAN, Arduino, MicroPython, and features integrated battery management with 18uA deep sleep. [Details](https://openhardware.directory/devices/heltec-vision-master-t190) | [Markdown](https://openhardware.directory/devices/heltec-vision-master-t190/md) ## Arduino UNO R4 WiFi Arduino's flagship UNO board upgraded with Renesas RA4M1 ARM Cortex-M4F at 48MHz, ESP32-S3 WiFi/BLE 5.0, built-in 12×8 LED matrix, 12-bit DAC, CAN bus, op-amp, and Qwiic connector — all in the classic UNO form factor at 5V. [Details](https://openhardware.directory/devices/arduino-uno-r4-wifi) | [Markdown](https://openhardware.directory/devices/arduino-uno-r4-wifi/md) ## Arduino UNO R4 Minima The affordable entry to Arduino's R4 generation — Renesas RA4M1 ARM Cortex-M4F at 48MHz with 256KB flash, 32KB SRAM, 12-bit DAC, CAN bus, op-amp, and USB-C in the classic UNO form factor at 5V. No wireless, pure microcontroller power. [Details](https://openhardware.directory/devices/arduino-uno-r4-minima) | [Markdown](https://openhardware.directory/devices/arduino-uno-r4-minima/md) ## Arduino Nano ESP32 Arduino Nano form factor powered by ESP32-S3 with WiFi 802.11 b/g/n, Bluetooth LE 5.0, dual-core Xtensa LX7 at 240MHz, 8MB flash, 512KB SRAM, USB-C, and HID support — Arduino's compact IoT powerhouse with MicroPython support. [Details](https://openhardware.directory/devices/arduino-nano-esp32) | [Markdown](https://openhardware.directory/devices/arduino-nano-esp32/md) ## Arduino GIGA R1 WiFi Arduino's most powerful board — dual-core STM32H747XI with Cortex-M7 at 480MHz + Cortex-M4 at 240MHz, 2MB flash, 1MB RAM, WiFi, Bluetooth, 76 GPIO, USB-A + USB-C, 3.5mm audio jack, camera connector, and CAN bus in Mega/Due form factor. [Details](https://openhardware.directory/devices/arduino-giga-r1-wifi) | [Markdown](https://openhardware.directory/devices/arduino-giga-r1-wifi/md) ## Arduino Nano RP2040 Connect Nano form factor board with RP2040 dual-core Cortex-M0+ at 133MHz, 16MB flash, 264KB SRAM, WiFi 802.11 b/g/n and BLE via u-blox NINA-W102, built-in 6-axis IMU and microphone, 22 digital I/O with 20 PWM channels. [Details](https://openhardware.directory/devices/arduino-nano-rp2040-connect) | [Markdown](https://openhardware.directory/devices/arduino-nano-rp2040-connect/md) ## Arduino Nano R4 The newest Arduino Nano — Renesas RA4M1 ARM Cortex-M4F at 48MHz with 256KB flash, 32KB SRAM, Qwiic connector, RGB LED, castellated pins, and USB-C in an ultra-compact 43×17mm form factor. No wireless, pure embedded power. [Details](https://openhardware.directory/devices/arduino-nano-r4) | [Markdown](https://openhardware.directory/devices/arduino-nano-r4/md) ## Arduino UNO Q Arduino's first Linux-capable UNO — Qualcomm Dragonwing QRB2210 quad-core Cortex-A53 + STM32U585 real-time co-processor, 2GB/4GB RAM, 16GB eMMC, WiFi 5, Bluetooth 5.1, 8×13 LED matrix, USB-C, and AI-ready with Arduino App Lab in the classic UNO form factor. [Details](https://openhardware.directory/devices/arduino-uno-q) | [Markdown](https://openhardware.directory/devices/arduino-uno-q/md) ## Arduino Portenta X8 Industrial-grade Linux SoM with NXP i.MX 8M Mini quad-core Cortex-A53 at 1.8GHz + STM32H747 dual-core Cortex-M7/M4, 2GB RAM, WiFi/BLE, NXP SE050 hardware security, Docker containers, and OTA updates for edge computing. [Details](https://openhardware.directory/devices/arduino-portenta-x8) | [Markdown](https://openhardware.directory/devices/arduino-portenta-x8/md) ## Arduino Portenta C33 Cost-effective Portenta module with Renesas RA6M5 ARM Cortex-M33 at 200MHz, 2MB flash, 512KB SRAM, WiFi/BLE, hardware security, and Portenta/MKR compatibility — bringing industrial IoT capabilities at a fraction of the X8 price. [Details](https://openhardware.directory/devices/arduino-portenta-c33) | [Markdown](https://openhardware.directory/devices/arduino-portenta-c33/md) ## Arduino Nicla Vision Tiny 22.86mm AI vision module with STM32H747 dual-core Cortex-M7/M4, 2MP camera, WiFi/BLE, 6-axis IMU, microphone, and time-of-flight sensor — runs TinyML image recognition and OpenMV/MicroPython at the edge. [Details](https://openhardware.directory/devices/arduino-nicla-vision) | [Markdown](https://openhardware.directory/devices/arduino-nicla-vision/md)