ESPHome

ESP32-PICO-D4 development board with LoRa SX1276/SX1278 radio, 0.96\" SSD1306 OLED, microSD slot, WiFi, Bluetooth 4.2, and LiPo battery support in a compact 66×36mm form factor.

Open-source ESP32-S3 smartwatch with LoRa, 1.3" 240×240 IPS touchscreen, haptic feedback, accelerometer, speaker, microphone, IR transmitter, and 1500mAh battery. Supports Meshtastic, ESPHome, Arduino

Compact ESP32-PICO-D4 development board with integrated 1.14-inch ST7789V IPS LCD (135×240, 260 PPI), WiFi, Bluetooth 4.2/BLE, and Arduino/MicroPython support.

ESP32 development board combining LoRa radio (SX1276/SX1278), u-blox NEO-6M GPS, 0.96" OLED display, and 18650 battery support — the go-to board for Meshtastic and LoRa tracking projects.

Ultra-compact ESP32-S3 board with a 0.85-inch GC9107 IPS display (128×128), 2MB PSRAM, WiFi, BLE 5.0, and USB-C — one of the smallest ESP32-S3 development boards available.

ESP32-S3 development board with 1.9-inch ST7789V TFT display (170×320), optional capacitive touch, 16MB flash, 8MB PSRAM, and USB-C. Popular for smart displays and IoT dashboards.

ESP32 board with SIMCom SIM7000G multi-band LTE-M/NB-IoT modem, GPS, 8MB PSRAM, USB-C, and 18650 battery support — designed for global cellular IoT deployments.

ESP32 plant sensor board with capacitive soil moisture, soil fertility, BH1750 light sensor, and DHT11/BME280 temperature/humidity — WiFi-connected smart plant care for gardens and greenhouses.

ESP32-S3 board with 1.91-inch RM67162 AMOLED display (240×536), optional touch, 16MB flash, 8MB PSRAM, and USB-C — delivering vivid OLED visuals for IoT dashboards and smart displays.

ESP32 board with SIM800L 2G GSM/GPRS modem for SMS alerts, voice calls, and cellular data — ideal for remote monitoring and IoT projects needing cellular fallback on a budget.

ESP32-S3 USB-A dongle with a 0.96-inch ST7735 color display (80×160), 16MB flash, WiFi, and BLE 5.0 — a compact plug-in development stick for IoT, media, and wireless sensor nodes.

LILYGO T-Micro32 Plus is an upgraded compact ESP32 module with 8MB flash, 2MB PSRAM, expanded GPIO, and an improved RED C3 ceramic antenna for stronger wireless performance.

ESP32-S3 all-in-one media board with 1.9-inch TFT display, rotary encoder, dual microphones, 1W speaker, 7 RGB LEDs, GROVE connector, and LiPo battery support — ideal for audio players and interactive

ESP32-S3 board with a circular 2.1\" or 2.8\" ST7701S RGB display (480×480) and capacitive touch — perfect for smart home controllers, round-display clocks, and interactive dashboards.

ESP32-S3 camera development board with OV2640 2MP sensor, 0.96-inch OLED display, 16MB flash, 8MB PSRAM, WiFi, and BLE 5.0 — a ready-to-use platform for WiFi streaming cameras and computer vision proj

ESP32 board with LAN8720 10/100 Mbps Ethernet, Power-over-Ethernet (PoE 36–57V), WiFi, and BLE 4.2 — ideal for wired IoT gateways, industrial automation, and network-connected data loggers.

ESP32-S3 HMI development board with a 2.8-inch resistive touchscreen, GROVE connectors, 16MB flash, 8MB PSRAM, and USB-C — designed for industrial HMI panels and interactive control interfaces.

Compact ESP32-S3 development board with wired Ethernet (W5500 SPI), WiFi, BLE, microSD slot, and optional PoE and camera shields for reliable networked IoT edge nodes.

Ultra-affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, USB 3.0, QWIIC/Stemma QT connector, power switch, and breadboard-compatible pinout at under $8.

ESP32 development board with integrated CAN bus and RS-485 transceivers, TF card, WiFi, and BLE for industrial IoT, Modbus, and automotive OBD-II applications with 5–12V wide-range power input.

Tiny ESP32-C6 dev board with WiFi 6, BLE 5, Zigbee/Thread (802.15.4), 0.85" 128×128 touchscreen, LiPo battery charging, and breathing LED in a thumbnail-sized form factor.

ESP32-S3 board with 6 onboard relays, 16MB flash, 8MB PSRAM, WiFi, and BLE for ESPHome smart home automation, controlling lights, appliances, and HVAC systems.

Affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, integrated 18650 battery holder, WiFi, and BLE 5.0 for battery-powered IoT sensor nodes under $10.

Smart rotary encoder controller based on ESP32-C6 with WiFi 6, BLE 5, Zigbee/Thread, 4 RGB LEDs, buzzer, and magnetic Hall-effect knob for wireless volume control and smart home automation.

Dual-MCU smart panel (ESP32-S3 + ESP32-H2) with 4" 480×480 IPS LCD (ST7701S), WiFi, BLE, native Zigbee/Thread/Matter via H2 co-processor, and optional RS485/CAN FD expansion for wall-mounted smart hom

LILYGO T5s is an ESP32 development board with a 2.7-inch 264×176 e-paper display, onboard I2S audio (MAX98357A amplifier + ICS43434 MEMS mic), 500mA battery management, and TF card support.

LILYGO T8-C3 is a compact ESP32-C3 development board featuring Wi-Fi, BLE 5.0, 4MB flash, TF card slot, and USB Type-C, requiring the T-U2T adapter for programming.

LILYGO T-OI Plus is a compact ESP32-C3 development board with Wi-Fi, BLE 5.0, Grove connectors, and optional 16340 battery holder, designed to fit Sonoff BASICR2 enclosures.

LILYGO T5 2.13inch E-Paper is an ESP32-D0WDQ6 V3 development board with a 2.13-inch 212×104 e-ink display supporting 4-level grayscale, 4MB flash, TF card slot, and battery management with 4 user butt

ESP32 development board with 4 onboard HRS4H-S-DC5V relays, 4MB flash, 8MB PSRAM, WiFi, BLE 4.2, and optocoupler-isolated GPIO expansion — designed for wireless remote switch control of AC/DC loads.

LILYGO T-01C3 is an ultra-compact ESP32-C3 RISC-V module with Wi-Fi and BLE 5.0, available with or without pre-soldered pins, featuring 5.33µA deep sleep current.

LILYGO T-Micro32 V2.0 is a 45%-smaller ESP32 PICO-D4 module with integrated IPEX antenna connector, designed for space-constrained embedded product designs.

LILYGO T4 is an ESP32 development board with 8MB PSRAM, optional 2.2 or 2.4-inch ILI9341 TFT LCD display, Wi-Fi, Bluetooth 4.2 BLE, and Li-Po battery support.

LILYGO T-Micro32 S3 is an ultra-compact ESP32-S3FH4R2 module with Wi-Fi, BLE 5.0, 4MB flash, 2MB PSRAM, and dual-core Xtensa LX7 processor in a minimal footprint.

ESP32 development board with LAN8720 Ethernet, 16MB flash, 8MB PSRAM, WS2812 RGB LED, SIM/TF card slots, and T-PCIE expansion support for industrial IoT, wired networking, and CAN bus applications.

LILYGO T3 S3 E-Paper is an ESP32-S3 LoRa development board with a 2.13-inch 250×122 e-paper display (DEPG0213BN), 4MB flash, 2MB PSRAM, WiFi, BLE 5, SX1262 LoRa transceiver, and LiPo battery support.

Compact ESP32 development board (Mini32 form factor) with 4MB Flash, WiFi 802.11 b/g/n, Bluetooth 4.2, CH340C USB-to-serial, TP4054 LiPo charger, and 1.25mm JST battery connector — a classic breadboar

Updated ESP32 Mini32 development board with 8MB PSRAM, 4/16MB Flash options, dual-core 240MHz, CH9102 USB-serial, WiFi, BLE 4.2, and 1.25mm JST LiPo connector in a 40×31mm breadboard-friendly footprin

ESP32 development board with integrated 0.96-inch SSD1306 OLED display, 4MB Flash, 520KB SRAM, WiFi, Bluetooth dual-mode, USB-C, and onboard LiPo battery charging for compact IoT display projects.

ESP8266 development board with 1.3-inch SH1106 OLED display, 8 digital I/O pins, CH9102 USB-serial, 3.3V operation, WiFi 802.11 b/g/n, and JST 1.25mm LiPo connector — supports ESPHome and Tasmota firm

Open-source ESP32-based ventilation controller for Ducobox Silent/Focus and Orcon MVS-15xx systems with optional CO2, humidity, VOC, and NOx sensors, fully compatible with ESPHome and Home Assistant.

ESP32-WROVER-E development board with LAN8720 Ethernet, IEEE 802.3 af/at Power over Ethernet (5V@4A, 44–57V input), 16MB flash, 8MB PSRAM, WiFi, BLE 4.2, and expandable LCD interface for wired IoT gat

LILYGO T4 S3 is an ESP32-S3 development board with a 2.41-inch AMOLED touchscreen (450x600), 16MB flash, 8MB PSRAM, microSD slot, Wi-Fi, and Bluetooth 5 LE.

ESP32-WROVER-E development board with 8 optocoupler-isolated 5V relay channels (HRS4H-S-DC5V), Wi-Fi, BLE 4.2, 8MB PSRAM, and support for DC 12–24V power input for industrial automation.

Dual-MCU Zigbee development board combining ESP32-C3 (WiFi/BLE) and Telink TLSR8258 (Zigbee/BLE Mesh) — both run simultaneously for bridging Zigbee sensor networks to WiFi/cloud platforms.

Open-source ESP32 Teleinfo reader board for French Linky energy meters. Pre-flashed with Tasmota, features USB-C, WiFi, QWIIC I2C port, and RGB LED. Reads both Standard and Historique TIC formats.

ESP32-S2-based WiFi fan controller with 4 independent PWM outputs, integrated HDC1080 temperature and humidity sensor, Qwiic expansion, and native Home Assistant integration via ESPHome.

ESP32-based camera dev board with OV2640 2MP sensor, microSD slot, WiFi, Bluetooth, 4MB flash, and 520KB SRAM. Ideal for DIY security cameras, timelapse, and computer vision projects.

ESP32 module with built-in Ethernet (LAN8720A PHY), WiFi, and Bluetooth. Designed for wired IoT applications, gateways, and industrial automation where reliable network connectivity is essential.

Ultra-compact ESP32-PICO smart speaker dev kit (24x24mm) with built-in microphone, speaker, RGB LED, button, and Grove port. Ideal for voice assistant and audio streaming projects.

Ultra-compact ESP32-C6 dev board by M5Stack with WiFi 6, BLE 5.0, Zigbee 3.0, and Thread/Matter support. RISC-V single-core at 160MHz, USB-C, RGB LED, and button in a tiny form factor.

Ultra-compact ESP32-PICO dev board (24x24mm) with 5x5 RGB LED matrix, 6-axis IMU (MPU6886), IR LED, programmable button, and Grove port. Perfect for LED displays and motion sensing.

Ultra-compact ESP32-S3 dev board (24x24mm) by M5Stack without display. Features WiFi, BLE 5.0, 8MB flash, Grove port, RGB LED, button, and USB-C in a tiny enclosure for IoT and embedded projects.

ESP32-S3 development board with a 3.5" capacitive touch IPS LCD (480x320), 16MB flash, and 8MB PSRAM. Popular for building custom HMI/UI projects with LVGL, smart home panels, and IoT dashboards.

Open-source ESP32-S3 camera board with PoE, microSD, and Stemma QT designed for AI-powered utility meter reading using the AI-on-the-edge-device firmware with TensorFlow Lite inference.

ESP32-S3 smart speaker dev kit with ES7210 audio codec, NS4168 amplifier, dual MEMS microphones, and RGB LED. Designed for Home Assistant voice assistant, ESPHome, and audio streaming projects.

WiFi smart switch based on ESP8285, widely used in the open-source home automation community. Easily flashable with Tasmota or ESPHome for local-only smart home control without cloud dependency.

Compact WiFi development board based on the ESP8266-12F module. Features 4 MB flash, 11 digital I/O pins, Micro-USB, and a rich shield ecosystem. One of the most popular boards for IoT projects.

ESP32-C6 based 2-channel AC relay module with WiFi 6, Zigbee 3.0, and Thread support. Compact relay board compatible with Arduino and ESPHome for smart home AC switching up to 10A per channel.

ESP32-C6 based WiFi smart switch for single live wire AC power control. Supports WiFi 6 and Zigbee 3.0, fits standard wall boxes for home automation.

Compact ESP8266-based WiFi dev board with 1MB flash, 2 GPIO pins, and 802.11 b/g/n. Runs Arduino, MicroPython, ESPHome, and Tasmota firmware for smart home and IoT projects.

ESP32 + DW3000 UWB development board for centimeter-accurate indoor positioning and ranging. Supports UWB channels 5 and 9, FiRa compatible, Apple U1 interoperable. WiFi and Bluetooth for data relay.

ESP32 audio development board with TAS5805M I2S Class-D amplifier delivering 2x23W stereo output, designed for multi-room audio, network streaming, and smart home integration.

ESPHome-native indoor air quality sensor with PM1.0/PM2.5/PM4/PM10, CO2, VOC, NOx, temperature, humidity, pressure, light, and sound monitoring. Designed for Home Assistant with full local control and

Open-source ESP-based communication PCB for local monitoring and control of Panasonic Aquarea heat pumps via MQTT and HTTP, with Home Assistant integration and S0 energy metering support.

ESP32-C3 based WiFi/BLE smart relay module with 16A switching capacity, dry contact input, and compact DIN-rail or in-wall form factor. Flashable with Tasmota or ESPHome for local smart home control.

Compact ESP8266-based WiFi development board with 4MB flash, 11 digital I/O pins, micro-USB, and a rich shield ecosystem. The most popular board for Tasmota and ESPHome DIY home automation projects.

ESP32-based smart wall switch with 3.5-inch capacitive touchscreen, dual relay outputs, temperature sensor, and buzzer. Flashable with Tasmota for custom LVGL/Berry interfaces and Home Assistant integ

Ultra-compact ESP32-C3 WiFi smart switch module with 10A relay, detached switch mode, and the smallest form factor in its class. Fits any wall box. Flashable with Tasmota for local control.

ESP32-based dual-relay WiFi/BLE smart switch with per-channel power monitoring via ADE7953, cover/shutter control mode, and 10A per channel. Flashable with Tasmota for local roller blind and dual ligh

Open-source Feather-form-factor ESP32-C6 board with WiFi 6, BLE 5, Thread, Zigbee, STEMMA QT, NeoPixel, LiPo charging with MAX17048, and CircuitPython support — $14.95.

Open-source ESP32 development board with built-in Ethernet, Power-over-Ethernet support, micro-SD card slot, and LiPo battery connector. Ideal for wired Tasmota nodes and industrial IoT applications.

Compact USB-A dongle development board with ESP32-C6 RISC-V MCU, 1.14\" IPS LCD, WiFi 6, BLE 5.0, Zigbee 3.0, Thread, and microSD slot for portable IoT projects.

Ultra-compact castellated ESP32-H2 development board with BLE 5.2, Zigbee 3.0, Thread 1.3, and Matter support. USB-C powered with WS2812 RGB LED, 15 GPIO pins, and 4MB flash in a tiny 23.5 x 15.2mm fo

Pico-form-factor development board with ESP32-P4 RISC-V dual-core at 400MHz, 100Mbps Ethernet via IP101 PHY, 32MB PSRAM, 32MB flash, MIPI-DSI/CSI interfaces, onboard ES8311 audio codec with amplifier,

Open-source hardware evaluation board with ESP32-C6, 4 mains-rated relays, 4 opto-isolated inputs, and WiFi 6/Thread/Zigbee/Matter connectivity for home and industrial automation.

Breadboard-friendly open-source ESP32-C6 dev board with WiFi 6, Thread, Zigbee, BLE 5, built-in LiPo charger, and dual USB-C — all for under €9.

Ultra-affordable open-source ESP32-H2 dev board for Thread, Zigbee, and Matter — BLE 5, LiPo charging, Qwiic/Stemma, dual USB-C, for €5.95.

Low-cost ESP32-C6 IoT board with WiFi 6, BLE 5, Thread, Zigbee, Matter, solar panel charging with MPPT, and ultra-low 16µA deep sleep — for $5.90.

Coin-sized (25×20.5mm) ESP32-C6 wearable dev board with WiFi 6, BLE 5, Thread, Zigbee, Matter, integrated LiPo charger, and 14µA deep sleep — for $4.90.

Thumb-sized (21×17.8mm) Matter/Thread/Zigbee/WiFi 6/BLE 5.3 dev board with dual RISC-V cores, onboard antenna, 15µA deep sleep, and hardware security — for ~$5.

ESP32-S3 industrial PLC controller with 1.14" IPS LCD, 4 relays, 8 opto-isolated inputs, RS-485, CAN bus, INA226 power monitor, RTC, buzzer, microSD, and DIN-rail mounting in a compact enclosure.

Ultra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD, BMI270 IMU, BMM150 magnetometer, 8MB PSRAM, IR transmitter, LP5562 RGB LED driver, and Grove port for IoT and robotics.

Breadboard-friendly ESP8266 WiFi breakout at 80 MHz with 802.11 b/g/n, 9 GPIO, 3.3V logic, 500mA regulator, and pre-loaded NodeMCU firmware — Adafruit's accessible entry point to ESP8266 development.

All-in-one ESP8266 WiFi Feather board at 80 MHz with 802.11 b/g/n, USB-serial (CP2104), LiPo charging, 9 GPIO, and 4MB flash — the easiest way to add WiFi to a portable battery-powered project.

The Adafruit MagTag is an ESP32-S2 WiFi e-paper IoT display board featuring a 2.9" 296×128 grayscale e-ink screen, 4 NeoPixels, LIS3DH accelerometer, 4 user buttons, STEMMA QT, USB-C, LiPo charging, a

Adafruit's Feather-format ESP32 board with dual-core Xtensa LX6 @ 240MHz, WiFi b/g/n, Bluetooth Classic + BLE 4.2, built-in LiPo charger, and Feather-compatible pin layout. Great all-around wireless I

Feature-rich ESP32 IoT dev kit with 2.0" IPS display, 8MB PSRAM, 16MB flash, MPU6886 IMU, BMM150 magnetometer, 10x SK6812 RGB LEDs, microphone, speaker, microSD, 500mAh battery, and M5GO charging base

Compact ESP32 IoT dev kit with 2.0" IPS LCD (320x240), 16MB flash, microSD, speaker, 110mAh battery, and three Grove ports in a stackable 54mm square enclosure.

ESP32-S3 IoT controller with 2.0" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, 200mAh battery, and Grove expansion port

Ultra-compact RISC-V development board with ESP32-C3FN4, WiFi, BLE 5.0, integrated battery management, and USB-C — ideal for low-power IoT sensor nodes and wireless prototyping.