I2S

ESP32-S3 handheld dev board with QWERTY keyboard, trackball, 2.8" IPS LCD, LoRa SX1262, GPS, speaker, dual microphones, and 2000mAh battery in an ABS case.

Open-source ESP32-S3 smartwatch with LoRa, 1.3" 240×240 IPS touchscreen, haptic feedback, accelerometer, speaker, microphone, IR transmitter, and 1500mAh battery. Supports Meshtastic, ESPHome, Arduino

Programmable ESP32 smartwatch with 1.54-inch touch IPS display, BMA423 accelerometer, PCF8563 RTC, PDM microphone, speaker, IR transmitter, and vibration motor — fully open-source and Arduino/MicroPyt

ESP32-S3 all-in-one media board with 1.9-inch TFT display, rotary encoder, dual microphones, 1W speaker, 7 RGB LEDs, GROVE connector, and LiPo battery support — ideal for audio players and interactive

ESP32-S3 handheld terminal with 2.8-inch IPS display, mini QWERTY keyboard, trackball, optional SX1262 LoRa, speaker, and microphone — a self-contained portable communicator running Meshtastic and Mes

Premium ESP32-S3 smartwatch development platform with 2.06" AMOLED touchscreen, LoRa SX1262, GNSS, NFC, MAX98357A audio, DRV2605 haptic, AXP2101 PMIC, and 1100mAh battery.

Compact LoRa pager with ESP32-S3, 2.33" touchscreen, QWERTY keyboard, u-blox GNSS, BHI260AP AI IMU, ES8311 audio codec, RFID/NFC, and foldable antenna for off-grid messaging.

ESP32-S3 smartwatch dev board with LoRa SX1262, GNSS, BMA423 accelerometer, MAX98357A audio, DRV2605 haptic feedback, AXP2101 PMIC, and 940mAh battery for wearable LoRa projects.

ESP32-WROVER-E development board with SIM7070G NB-IoT/LTE-M/GPRS modem, GPS, Wi-Fi, Bluetooth 4.2, MicroSD, and solar charging input for ultra-low-power IoT applications.

Compact ESP32 development board combining a physical keyboard with a 1.14" IPS display, USB-C charging, multiple interfaces, and optional 2800mAh battery in shell configuration.

LILYGO T5s is an ESP32 development board with a 2.7-inch 264×176 e-paper display, onboard I2S audio (MAX98357A amplifier + ICS43434 MEMS mic), 500mA battery management, and TF card support.

ESP32-based development board with SIM7600E-H 4G LTE Cat-4 modem, GPS, Wi-Fi, Bluetooth, 18650 battery holder with solar charging, and dual USB-C ports for high-speed IoT connectivity.

ESP32 development board with 4 onboard HRS4H-S-DC5V relays, 4MB flash, 8MB PSRAM, WiFi, BLE 4.2, and optocoupler-isolated GPIO expansion — designed for wireless remote switch control of AC/DC loads.

Enhanced T-Echo with nRF52840, SX1262 LoRa, L76K GPS, BHI260AP IMU, 2400mAh battery, 1.54-inch e-paper display, vibration motor, buzzer, and 1/4-inch mount — Meshtastic-ready with extended runtime.

LILYGO T-Wrist E-Paper is an ESP32-based wearable development board with a 1.54-inch 200×200 e-paper display, vibration motor, optional GPS (LG77 GNSS), WiFi, Bluetooth 4.2, and 3D-printable watch she

ESP32-WROVER-E development board with A7670E LTE Cat-1 modem supporting voice calls, SMS, and GPS positioning. Available with multiple regional frequency variants for global 4G deployments.

ESP32-S3 camera development board with mPCIe slot for LILYGO T-PCIE SIM cellular modules, supporting OV2640 or OV5640 cameras, 16MB flash, 8MB PSRAM, TF card, and I2S microphone for connected vision a

ESP32-WROVER-E development board with A7608E-H LTE Cat-1 modem supporting voice, SMS, GPS, and multi-band LTE-FDD/TDD connectivity for Europe with 18650 battery support.

ESP32 development board with LAN8720 Ethernet, 16MB flash, 8MB PSRAM, WS2812 RGB LED, SIM/TF card slots, and T-PCIE expansion support for industrial IoT, wired networking, and CAN bus applications.

ESP32-WROVER development board with 0.96-inch OLED display, five-way directional button, single 18650 battery holder, 8MB PSRAM, WiFi, and BLE 4.2 — a compact handheld IoT controller in a slim form fa

ESP32-S3 camera development board with 8MB PSRAM, 16MB Flash, onboard microphone, MAX98357A I2S amplifier, speaker output, and choice of OV2640 or OV5640 camera sensor for audio-visual IoT application

Programmable ESP32 smartwatch with 1.3-inch round GC9A01 IPS touchscreen (240×240), BMA423 accelerometer, vibration motor, RTC, WiFi, and BLE 4.2 — open-source and fully programmable with Arduino or M

Compact ESP32 development board (Mini32 form factor) with 4MB Flash, WiFi 802.11 b/g/n, Bluetooth 4.2, CH340C USB-to-serial, TP4054 LiPo charger, and 1.25mm JST battery connector — a classic breadboar

High-performance ESP32-P4 development board with dual-core 360MHz RISC-V, 4.1" AMOLED or 4.05" TFT touchscreen, 2MP camera, SX1262 LoRa, GPS, 9-axis IMU, and ESP32-C6 for Wi-Fi 6 and Bluetooth 5.

Compact ESP32-S2-WROOM module-based development board with 4MB Flash, 320KB SRAM, native USB OTG, WiFi 802.11 b/g/n, onboard LiPo charging, and BOOT/RESET buttons for USB HID and IoT prototyping.

Updated ESP32 Mini32 development board with 8MB PSRAM, 4/16MB Flash options, dual-core 240MHz, CH9102 USB-serial, WiFi, BLE 4.2, and 1.25mm JST LiPo connector in a 40×31mm breadboard-friendly footprin

Pure ESP32-S2 development board with 4MB Flash, 8MB SRAM, native USB, WiFi 802.11 b/g/n, onboard LiPo charging, and multiple control buttons — a single-core Xtensa LX7 board for USB-HID and IoT applic

ESP32-WROVER-E development board with 8 optocoupler-isolated 5V relay channels (HRS4H-S-DC5V), Wi-Fi, BLE 4.2, 8MB PSRAM, and support for DC 12–24V power input for industrial automation.

ESP32-S3 LoRa voice kit with MAX98357A speaker, MSM261S4030HOR microphone, vibration motor, RTC, 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, and SX1262/SX1276/SX1280 radio options — designed for LoR

ESP32 development board with SIM800L 2G GSM/GPRS cellular modem, Wi-Fi, Bluetooth 4.2, USB-C charging, and Li-Po battery connector for IoT devices requiring SMS and GPRS data connectivity.

Dual-MCU development board combining ESP32 and KENDRYTE K210 RISC-V AI processor with OV2640 camera, 1.54" IPS touchscreen, I2S audio amplifier, motor driver, 6-axis IMU, and Wi-Fi for edge AI and rob

Third-generation M5Stack Core with ESP32-S3 dual-core 240MHz, 2.0\" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, RTC, 5

ESP32-based IoT dev kit with 2.0" IPS capacitive touch display, 16MB flash, 8MB PSRAM, built-in mic, speaker, IMU, vibration motor, and 390mAh battery in a compact stackable enclosure.

Credit-card-sized ESP32-S3 handheld computer with 56-key mechanical keyboard, 1.14" IPS display, BMI270 IMU, ES8311 audio codec, 1W speaker, MEMS microphone, IR transmitter, 1750mAh battery, Grove I2C

Open-source Raspberry Pi audio HAT featuring TAS5825M Class-D amplifier with integrated DSP, delivering 32W per channel at 8 ohms. Includes 15-band parametric EQ, FIR filtering, DRC, IR input, and onb

ESP32-S3 smart speaker dev kit with ES7210 audio codec, NS4168 amplifier, dual MEMS microphones, and RGB LED. Designed for Home Assistant voice assistant, ESPHome, and audio streaming projects.

RISC-V AI development board combining the Kendryte K210 AI processor with ESP32 for WiFi/BT connectivity. Includes camera and microphone for computer vision and voice recognition applications.

ESP32 audio development board with TAS5805M I2S Class-D amplifier delivering 2x23W stereo output, designed for multi-room audio, network streaming, and smart home integration.

ESPHome-native indoor air quality sensor with PM1.0/PM2.5/PM4/PM10, CO2, VOC, NOx, temperature, humidity, pressure, light, and sound monitoring. Designed for Home Assistant with full local control and

NASA-themed DIY robotics kit with ESP32-S3, camera, dual DC motors, 3 servos, and WiFi/BLE. Build a programmable Mars Rover replica with robotic arm and live video feed.

Compact Pico-form-factor development board based on the ESP32-P4 RISC-V dual-core processor at 400MHz with 32MB PSRAM, 32MB flash, MIPI-DSI/CSI interfaces, onboard ES8311 audio codec with NS4150B ampl

High-performance compact board with ATSAMD51 Cortex M4F at 120MHz, 192KB RAM, 512KB flash, 2MB SPI flash, dual 12-bit DAC/ADC, 18 PWM outputs, AES-256 crypto, and native USB. Measures 36mm × 18mm.

Gigabit + 2.5G dual Ethernet base board for Raspberry Pi Compute Module 5 with M.2 NVMe slot, dual HDMI 4K output, dual MIPI interfaces, wide 7-36V input, EEPROM, and encryption chip for industrial Io

Compact castellated ESP32-S3 development board with Semtech LR1121 multi-band LoRa transceiver supporting Sub-GHz and 2.4GHz bands, WiFi, BLE 5.0, and Meshtastic compatibility in a 41x21mm form factor

ESP32-S3 AIoT camera board with 5MP OV5640 autofocus camera, dual-microphone array with noise cancellation, ES8311 audio codec, NS4150B speaker amplifier, battery charging, and display/camera expansio

Pico-form-factor development board combining the ESP32-P4 RISC-V dual-core at 400MHz with an ESP32-C6 co-processor for WiFi 6 and Bluetooth 5 LE. Features 32MB PSRAM, 32MB flash, MIPI-DSI/CSI, onboard

ESP32-S3 AI smart speaker development board with dual-microphone array, ES8311 audio codec, 7 surround RGB LEDs, RTC, camera and LCD expansion interfaces, and LiPo battery support for voice assistant

Pico-form-factor development board with ESP32-P4 RISC-V dual-core at 400MHz, 100Mbps Ethernet via IP101 PHY, 32MB PSRAM, 32MB flash, MIPI-DSI/CSI interfaces, onboard ES8311 audio codec with amplifier,

Full-featured ESP32-P4 development board with WiFi 6 and Bluetooth 5 LE via ESP32-C6, 100Mbps Ethernet, PoE header, 3.5mm headphone jack, USB OTG HS switchable host/device, 16MB flash, 32MB PSRAM, MIP

ESP32-P4 development board with WiFi 6 and Bluetooth 5 LE via ESP32-C6, 100Mbps PoE Ethernet via IP101GRI, IPEX external antenna, USB Type-A OTG HS, 32MB PSRAM, 16MB flash, MIPI-DSI/CSI, onboard audio

Low-cost ESP32-C6 IoT board with WiFi 6, BLE 5, Thread, Zigbee, Matter, solar panel charging with MPPT, and ultra-low 16µA deep sleep — for $5.90.

Coin-sized (25×20.5mm) ESP32-C6 wearable dev board with WiFi 6, BLE 5, Thread, Zigbee, Matter, integrated LiPo charger, and 14µA deep sleep — for $4.90.

Espressif ESP32-C6 WROOM module with 8MB flash and PCB antenna, supporting Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread — for soldering onto custom IoT hardware.

Espressif ESP32-C6 WROOM module with 4MB flash and PCB antenna, supporting Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread — for soldering onto custom IoT hardware.

ESP32-S2 Feather-format board by Unexpected Maker with 4MB flash, 2MB PSRAM, 5×5 RGB LED matrix, LiPo charging, and STEMMA QT — designed for colorful wearable and IoT projects.

Flagship Raspberry Pi SBC with BCM2711 quad-core Cortex-A72 @ 1.5GHz, dual-band WiFi, Gigabit Ethernet, dual micro-HDMI 4K outputs, USB 3.0, and USB-C power. Available in 1GB, 2GB, 4GB, and 8GB LPDDR4

Espressif reference development board for the ESP32-C6 with 8MB flash, Wi-Fi 6, Bluetooth 5 LE, Zigbee 3.0, Thread, RGB LED, dual USB-C ports, and full GPIO breakout.

Espressif development board for the ESP32-H2 with Bluetooth 5 LE, Zigbee 3.0, Thread, and Matter support, 4MB flash, USB-C, RGB LED, and full GPIO breakout — no Wi-Fi.

Tiny breadboard-friendly Bluetooth LE board with Nordic nRF52840 Cortex-M4F @ 64MHz, 1MB Flash, 256KB RAM, 2MB QSPI Flash, 21 GPIO, and native USB — all in a 36×17.6mm footprint. Supports CircuitPytho

Espressif ESP32-H2 MINI module with 4MB flash and PCB antenna, supporting Bluetooth 5 LE, Zigbee 3.0, Thread, and Matter — a compact bare module for custom PCB designs without Wi-Fi.

Sensor-rich BLE Feather with Nordic nRF52840 (64MHz Cortex-M4F), 6 onboard sensors (9-DoF IMU, magnetometer, proximity/light, PDM mic, humidity, barometric pressure), 21 GPIO, and FCC/IC/TELEC certifi

Child-oriented ESP32-S2 dev board with 4MB flash, 2MB PSRAM, 5 NeoPixels, microSD, I2S audio amplifier for speakers, USB-C, STEMMA QT, and AA battery or USB-C power support.

High-performance microcontroller with NXP i.MX RT1062 ARM Cortex-M7 @ 600MHz, 1MB RAM, 2MB Flash, 100Mbps Ethernet PHY, SD card, 55 GPIO, dual 480Mbps USB, and 3 CAN Bus. Expanded Teensy 4.0 sibling.

Ultra-compact ESP32-S3 board by Unexpected Maker in TinyPICO form factor with u.FL external antenna connector, 8MB flash, 8MB PSRAM, LiPo charging, and dual-core 240 MHz.

Unexpected Maker's pro ESP32-S3 Feather board with u.FL external antenna connector, 16MB flash, 8MB PSRAM, dual STEMMA QT connectors, LiPo charging, and dual 700mA regulators.

Raspberry Pi Zero W with pre-soldered 40-pin GPIO headers. BCM2835 single-core 1GHz ARM11, 512MB RAM, built-in 802.11 b/g/n WiFi (BCM43143), Bluetooth LE, Mini HDMI, Micro USB, and MicroSD. No solderi

Bare WiFi module with Espressif ESP32-S2 single-core Xtensa LX7 @ 240MHz, 4MB Flash, 2MB PSRAM, 802.11b/g/n, native USB 1.1 OTG, and SMD pads. Intended for integration onto custom PCBs, not a standalo

Unexpected Maker's ProS3 ESP32-S3 with u.FL external antenna, 16MB flash, 8MB PSRAM, 27 GPIO castellated headers, dual LDO regulators, LiPo charging, and STEMMA QT.

Bare WiFi module with ESP32-S2 Xtensa LX7 @ 240MHz, 4MB Flash, 2MB PSRAM, 802.11b/g/n, native USB OTG, and a uFL connector for an external antenna. Drop-in variant of the WROVER for improved RF range.

Espressif RISC-V dev board optimized for Rust programming, featuring ESP32-C3-MINI-1 with 4MB flash, Wi-Fi, BT5, onboard ICM-42670-P IMU, SHTC3 temperature/humidity sensor, and USB-C.

Espressif official ESP32-S2-WROVER development board with dual 20-pin headers (breadboard-friendly), 8MB Flash, 2MB PSRAM, WiFi, dual Micro-USB (native USB + UART bridge), NeoPixel RGB LED, and boot/r

High-performance Feather with ATSAMD51J19 Cortex M4F at 120MHz, 192KB RAM, 512KB flash, 2MB SPI flash, dual 12-bit DAC/ADC, AES-256 hardware crypto, LiPo charging, 21 GPIO, and native USB HID. Feather

Espressif's multimedia-focused ESP32-S2 evaluation platform bundling four extension boards: audio player, capacitive touch panel, 3.2" LCD display, and camera module. Designed to showcase ESP32-S2 hum

Espressif audio and multimedia development board with ESP32-S3, dual-microphone array for far-field wake-word detection, camera support, LCD interface, microSD, and Wi-Fi + BLE.

Open-source AIoT development kit with ESP32-S3, 2.4" touchscreen, dual microphones, speaker, Wi-Fi, BLE, Matter support, 16MB flash, 16MB PSRAM, and a high-density expansion connector.

CAN-bus-capable Feather with ATSAME51J19 ARM Cortex-M4F @ 120MHz, built-in CAN transceiver + 5V booster, USB-C, 21 GPIO, 2MB SPI Flash, dual DAC, and LiPo charging. Ideal for automotive and industrial

ESP32-S3-BOX-3 bundle kit including the AIoT dev board with 2.4" touchscreen, dual mics, speaker, plus the DOCK stand, RGB LED module, USB-C cable, and Dupont wires.

ESP32-S3 Feather board with 8MB flash, w.FL external antenna connector (MHF3/IPEX3), native USB-C, MAX17048 battery monitor, LiPo charging, NeoPixel, and STEMMA QT.

Compact ItsyBitsy-format ESP32 board with 8MB flash, 2MB PSRAM, PCB antenna, Wi-Fi + Bluetooth Classic + BLE, 20 GPIO, NeoPixel, STEMMA QT, and Micro-B USB.

ESP32-based MicroPython IoT module with 802.11b/g/n WiFi, Bluetooth LE and Classic, 8MB flash, 4MB RAM, and ultra-low power ULP co-processor for deep-sleep GPIO monitoring at 25 µA.

Compact ItsyBitsy-format ESP32 board with 8MB flash, 2MB PSRAM, w.FL external antenna connector, Wi-Fi + Bluetooth Classic + BLE, 20 GPIO, NeoPixel, STEMMA QT, and Micro-B USB.

ESP32-based MicroPython module combining 802.11b/g/n WiFi, Bluetooth, and LoRa/LoRaWAN (868/915 MHz) in one board. Can act as a nano LoRa gateway and is 100% Python programmable for multi-protocol IoT

The Adafruit Monster M4SK is a wearable dual-display Halloween mask board powered by ATSAMD51 Cortex-M4F at 120MHz with 8MB flash, two 240×240 IPS TFT eye displays, stereo audio, microphone, STEMMA co

Arduino Uno-compatible board with ATSAMD51J19 Cortex M4F at 120MHz, ESP32 AirLift WiFi co-processor with TLS/SSL, 512KB flash, 192KB RAM, 2MB QSPI flash, 25 GPIO, dual DAC/ADC, and native USB. Arduino

Tiny RISC-V ESP32-C3 dev board in the QT Py / Seeed XIAO footprint with 4 MB flash, WiFi, BLE 5 with Mesh, STEMMA QT, 13 GPIO, 5 ADC inputs, and USB-C — no native USB.

Industrial-grade embedded computer module with BCM2711 quad-core Cortex-A72 @ 1.5GHz, 1–8GB LPDDR4 RAM, optional 8–32GB eMMC and optional dual-band WiFi + Bluetooth 5.0. Available in 32 hardware varia

Feather board with nRF52840 ARM Cortex-M4F at 64MHz, BLE 5.0, native USB (CDC/HID/MIDI/MSC), 1MB flash, 256KB SRAM, 2MB QSPI flash, 21 GPIO, SWD debug, and LiPo charging. Supports Arduino and CircuitP

Official reference carrier board for the Raspberry Pi Compute Module 4. Exposes dual HDMI 2.0, Gigabit Ethernet, 2× USB 2.0, PCIe x1, dual camera/display FPC, microSD slot (for CM4 Lite), RTC, HAT hea

Arduino Mega-form-factor board with ATSAMD51P20 Cortex M4F at 120MHz, 1MB flash, 256KB RAM, 8MB QSPI flash, 70 GPIO pins, SD card slot, 8 SERCOM, 22 PWM outputs, dual DAC/ADC, AES-256, and native USB.

Arduino-compatible development board with ATSAMD51 ARM Cortex-M4F at 120 MHz, 512KB flash, 192KB RAM, 2MB QSPI flash, dual 1 MSPS DACs, crypto engine, NeoPixel, and native USB. CircuitPython and Ardui

Minimal ESP32 breakout board with dual-core Xtensa LX6 at 240MHz, 520KB SRAM, 4MB flash, WiFi 802.11 b/g/n, Bluetooth Classic + BLE, 12 ADC, 2 DAC. No USB converter or battery charger — requires exter

The ESP32-S2 WROOM is an Espressif WiFi module with a single-core Xtensa LX7 at 240MHz, 4MB flash, 320KB SRAM, built-in PCB antenna, native USB OTG, and rich peripheral support — a cost-effective WiFi

ESP32 dual-core 240 MHz Feather board with 802.11b/g/n WiFi, Bluetooth 4.2 Classic and BLE, 4MB flash, 520KB SRAM, 12 ADC channels, 2 DACs, capacitive touch, and built-in LiPo charger.

ESP8266-based IoT development board by Heltec with built-in 0.91-inch OLED display, Li-Po battery management, and WiFi connectivity in a compact 50.9x18.2mm form factor.

ESP32-S3 IoT controller with 2.0" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, 200mAh battery, and Grove expansion port

ESP32-S3-based IoT development board with built-in 0.96" OLED display, lithium battery management, WiFi and Bluetooth 5.0 connectivity, and USB-C interface in a compact 50mm form factor.

RISC-V SBC with quad-core T-Head TH1520 @ 1.85GHz, up to 16GB LPDDR4X, 4 TOPS NPU, WiFi 5/BT 5.2, 4K HDMI, Vulkan GPU. Credit card-sized form factor.

First RVA23-compliant RISC-V SBC with octa-core SpacemiT K3 @ 2.4GHz, up to 32GB LPDDR5, 60 TOPS AI accelerator, WiFi 6/BT 5.2, 10GbE SFP+, real-time processor.