5V + LiPo

ESP32-PICO-D4 development board with LoRa SX1276/SX1278 radio, 0.96\" SSD1306 OLED, microSD slot, WiFi, Bluetooth 4.2, and LiPo battery support in a compact 66×36mm form factor.

A pocket-sized ESP32-S3 development board with a 4.7-inch capacitive touchscreen e-paper display (960×540, 16 grayscale), anti-glare glass, warm-toned backlight, MagSafe wireless charging, and compreh

Open-source ESP32-S3 smartwatch with LoRa, 1.3" 240×240 IPS touchscreen, haptic feedback, accelerometer, speaker, microphone, IR transmitter, and 1500mAh battery. Supports Meshtastic, ESPHome, Arduino

Compact ESP32-PICO-D4 development board with integrated 1.14-inch ST7789V IPS LCD (135×240, 260 PPI), WiFi, Bluetooth 4.2/BLE, and Arduino/MicroPython support.

ESP32 development board combining LoRa radio (SX1276/SX1278), u-blox NEO-6M GPS, 0.96" OLED display, and 18650 battery support — the go-to board for Meshtastic and LoRa tracking projects.

Ultra-compact ESP32-S3 board with a 0.85-inch GC9107 IPS display (128×128), 2MB PSRAM, WiFi, BLE 5.0, and USB-C — one of the smallest ESP32-S3 development boards available.

ESP32-S3 development board with 1.9-inch ST7789V TFT display (170×320), optional capacitive touch, 16MB flash, 8MB PSRAM, and USB-C. Popular for smart displays and IoT dashboards.

ESP32 board with SIMCom SIM7000G multi-band LTE-M/NB-IoT modem, GPS, 8MB PSRAM, USB-C, and 18650 battery support — designed for global cellular IoT deployments.

Programmable ESP32 smartwatch with 1.54-inch touch IPS display, BMA423 accelerometer, PCF8563 RTC, PDM microphone, speaker, IR transmitter, and vibration motor — fully open-source and Arduino/MicroPyt

ESP32 plant sensor board with capacitive soil moisture, soil fertility, BH1750 light sensor, and DHT11/BME280 temperature/humidity — WiFi-connected smart plant care for gardens and greenhouses.

ESP32-S3 board with 1.91-inch RM67162 AMOLED display (240×536), optional touch, 16MB flash, 8MB PSRAM, and USB-C — delivering vivid OLED visuals for IoT dashboards and smart displays.

ESP32 board with SIM800L 2G GSM/GPRS modem for SMS alerts, voice calls, and cellular data — ideal for remote monitoring and IoT projects needing cellular fallback on a budget.

ESP32-S3 all-in-one media board with 1.9-inch TFT display, rotary encoder, dual microphones, 1W speaker, 7 RGB LEDs, GROVE connector, and LiPo battery support — ideal for audio players and interactive

ESP32-S3 board with a circular 2.1\" or 2.8\" ST7701S RGB display (480×480) and capacitive touch — perfect for smart home controllers, round-display clocks, and interactive dashboards.

nRF52840 + SX1262 LoRa + L76K GPS all-in-one board with 1.54-inch e-paper display, 850mAh battery, Thread, Zigbee, and BLE 5.0 — runs Meshtastic, SoftRF, and custom NRF firmware out of the box.

ESP32-S3 handheld terminal with 2.8-inch IPS display, mini QWERTY keyboard, trackball, optional SX1262 LoRa, speaker, and microphone — a self-contained portable communicator running Meshtastic and Mes

ESP32-S3 HMI development board with a 2.8-inch resistive touchscreen, GROVE connectors, 16MB flash, 8MB PSRAM, and USB-C — designed for industrial HMI panels and interactive control interfaces.

Premium ESP32-S3 smartwatch development platform with 2.06" AMOLED touchscreen, LoRa SX1262, GNSS, NFC, MAX98357A audio, DRV2605 haptic, AXP2101 PMIC, and 1100mAh battery.

Wearable ESP32-S3 development board with 1.1" full-color AMOLED display in a glasses prism form factor, microphone, RTC, and touch button for head-up display applications.

ESP32-S3 development board with a 1.64" ICNA3311 AMOLED display at 280×456 resolution, 16MB Flash, 8MB PSRAM, Wi-Fi and Bluetooth 5 LE connectivity.

Compact LoRa pager with ESP32-S3, 2.33" touchscreen, QWERTY keyboard, u-blox GNSS, BHI260AP AI IMU, ES8311 audio codec, RFID/NFC, and foldable antenna for off-grid messaging.

ESP32-S3 smartwatch dev board with LoRa SX1262, GNSS, BMA423 accelerometer, MAX98357A audio, DRV2605 haptic feedback, AXP2101 PMIC, and 940mAh battery for wearable LoRa projects.

Enhanced ESP32-S3 AMOLED development board with 1.91" RM67162 display, onboard RTC, PMU, SD card slot, capacitive touch, metal shielding, and external FPC antenna.

ESP32-S3 keyboard terminal with 3.1" e-paper touchscreen, LoRa SX1262, GPS, BHI260AP AI IMU, PCM5102A/ES8311 audio, 1400mAh battery, and optional 4G LTE (A7682E) for off-grid terminal applications.

ESP32-S3 multi-protocol RF tool with CC1101 sub-GHz transceiver (300–928 MHz), 13.56 MHz RFID, IR transmit/receive, 1.9" IPS display, and rotary encoder for RF analysis and replay attacks.

Tiny ESP32-C6 dev board with WiFi 6, BLE 5, Zigbee/Thread (802.15.4), 0.85" 128×128 touchscreen, LiPo battery charging, and breathing LED in a thumbnail-sized form factor.

Compact ESP32-S3 board with a 0.75" round 160×160 TFT LCD (GC9D01N), 16MB flash, 8MB PSRAM, WiFi, and BLE 5 for wearable watchface and circular display applications.

ESP32-S3 board with SI4732-A10 AM/FM/SW/LW radio receiver, 1.9" IPS display, 900mAh battery, and rotary encoder for a portable software-defined radio experience.

Compact ESP32-S3 development board featuring a 1.47" RM67162 AMOLED display with QSPI interface, 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and battery charging support.

Compact ESP32 development board combining a physical keyboard with a 1.14" IPS display, USB-C charging, multiple interfaces, and optional 2800mAh battery in shell configuration.

LILYGO T5s is an ESP32 development board with a 2.7-inch 264×176 e-paper display, onboard I2S audio (MAX98357A amplifier + ICS43434 MEMS mic), 500mA battery management, and TF card support.

LILYGO T8-C3 is a compact ESP32-C3 development board featuring Wi-Fi, BLE 5.0, 4MB flash, TF card slot, and USB Type-C, requiring the T-U2T adapter for programming.

ESP32-S3 development board with an elongated 3.4" capacitive touch TFT LCD (180×640 resolution), 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and optional enclosure variant.

LILYGO T5 2.13inch E-Paper is an ESP32-D0WDQ6 V3 development board with a 2.13-inch 212×104 e-ink display supporting 4-level grayscale, 4MB flash, TF card slot, and battery management with 4 user butt

Enhanced T-Echo with nRF52840, SX1262 LoRa, L76K GPS, BHI260AP IMU, 2400mAh battery, 1.54-inch e-paper display, vibration motor, buzzer, and 1/4-inch mount — Meshtastic-ready with extended runtime.

Compact ESP32-C3 keyboard terminal with a built-in 0.99" display, Wi-Fi, Bluetooth 4.2, 400mAh battery, and a 3D-printed shell for portable wireless input applications.

LILYGO T-Wrist E-Paper is an ESP32-based wearable development board with a 1.54-inch 200×200 e-paper display, vibration motor, optional GPS (LG77 GNSS), WiFi, Bluetooth 4.2, and 3D-printable watch she

Simplified T-Echo with nRF52840, SX1262 LoRa, and optional L76K GPS — a low-cost, low-power LoRa node and Meshtastic-compatible board for off-grid mesh networking.

LILYGO T4 is an ESP32 development board with 8MB PSRAM, optional 2.2 or 2.4-inch ILI9341 TFT LCD display, Wi-Fi, Bluetooth 4.2 BLE, and Li-Po battery support.

LILYGO T3 S3 E-Paper is an ESP32-S3 LoRa development board with a 2.13-inch 250×122 e-paper display (DEPG0213BN), 4MB flash, 2MB PSRAM, WiFi, BLE 5, SX1262 LoRa transceiver, and LiPo battery support.

LILYGO LoRa3 (T3 LoRa32 V1.6.1) is an ESP32 development board combining Wi-Fi, BLE, and LoRa radio (SX1276/SX1278) with OLED display and TF card slot for IoT and mesh networking.

Programmable ESP32 smartwatch with 1.3-inch round GC9A01 IPS touchscreen (240×240), BMA423 accelerometer, vibration motor, RTC, WiFi, and BLE 4.2 — open-source and fully programmable with Arduino or M

Compact ESP32-PICO-D4 camera board with OV2640 2MP sensor, 0.91-inch SSD1306 OLED display, fisheye or normal lens options, WiFi, BLE, and LiPo battery support — a minimal wireless camera module for Io

Compact ESP32 development board (Mini32 form factor) with 4MB Flash, WiFi 802.11 b/g/n, Bluetooth 4.2, CH340C USB-to-serial, TP4054 LiPo charger, and 1.25mm JST battery connector — a classic breadboar

LILYGO T5 E-Paper S3 Pro is an ESP32-S3 board with a 4.7-inch 16-greyscale e-paper display, SX1262 LoRa, touch input, RTC, BQ25896/BQ27220 battery management, 16MB flash, 8MB PSRAM, and optional GPS.

Compact ESP32-S2-WROOM module-based development board with 4MB Flash, 320KB SRAM, native USB OTG, WiFi 802.11 b/g/n, onboard LiPo charging, and BOOT/RESET buttons for USB HID and IoT prototyping.

LILYGO LoRa V1.3 is an ESP32 development board with SX1276 LoRa radio at 868/915 MHz, optional 0.96-inch OLED display, Wi-Fi, BLE, and 4MB flash for IoT and LoRa applications.

Updated ESP32 Mini32 development board with 8MB PSRAM, 4/16MB Flash options, dual-core 240MHz, CH9102 USB-serial, WiFi, BLE 4.2, and 1.25mm JST LiPo connector in a 40×31mm breadboard-friendly footprin

ESP32 development board with integrated 0.96-inch SSD1306 OLED display, 4MB Flash, 520KB SRAM, WiFi, Bluetooth dual-mode, USB-C, and onboard LiPo battery charging for compact IoT display projects.

ESP8266 development board with 1.3-inch SH1106 OLED display, 8 digital I/O pins, CH9102 USB-serial, 3.3V operation, WiFi 802.11 b/g/n, and JST 1.25mm LiPo connector — supports ESPHome and Tasmota firm

Pure ESP32-S2 development board with 4MB Flash, 8MB SRAM, native USB, WiFi 802.11 b/g/n, onboard LiPo charging, and multiple control buttons — a single-core Xtensa LX7 board for USB-HID and IoT applic

ESP32-S3 LoRa development board (hardware revision V1.3) with 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, WiFi, BLE 5.0, and support for SX1262/SX1276/SX1280/LR1121 radio modules at 433/868/915MHz a

ESP32 LoRa development board with a Temperature Compensated Crystal Oscillator (TCXO) for enhanced LoRa frequency stability, 0.96-inch SSD1306 OLED display, 4MB Flash, WiFi, BLE 4.2, TF card slot, and

STM32WL55CCU6 LoRa development board with dual Cortex-M4 + M0+ cores, built-in LoRa/FSK/MSK radio at 433/868/915MHz, 0.96-inch SSD1315 OLED, 256KB Flash, 64KB RAM, and open-source Arduino/STM32CubeIDE

ESP32-S3 LoRa voice kit with MAX98357A speaker, MSM261S4030HOR microphone, vibration motor, RTC, 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, and SX1262/SX1276/SX1280 radio options — designed for LoR

ESP32 development board with SIM800L 2G GSM/GPRS cellular modem, Wi-Fi, Bluetooth 4.2, USB-C charging, and Li-Po battery connector for IoT devices requiring SMS and GPRS data connectivity.

ESP32-S3 e-paper development board with 4.7-inch 540×960 16-grayscale display (EDO47TC1), Wi-Fi, Bluetooth 5.0, PCF8563 RTC, 16MB flash, 8MB PSRAM, and optional capacitive touch overlay.

Enhanced ESP32-S3 handheld with CC1101 sub-GHz radio, nRF24L01 2.4GHz radio, 1.9" IPS LCD, IR transceiver, 16MB flash, 8MB SRAM. Upgraded version of T-Embed CC1101 with added 2.4GHz wireless module.

ESP32-WROVER development board with Decawave DWM1000 UWB module for centimeter-accurate indoor positioning and ranging, featuring a 1.3\" OLED display and LiPo battery charging.

ESP32-S3 based LoRa development board with built-in 0.96" OLED display, SX1262 LoRa transceiver, WiFi, BLE 5.0, USB-C, and LiPo battery charging. One of the most popular boards for Meshtastic.

A smart WiFi-enabled weather station with a 7.5\" e-ink display showing current conditions, humidity, pressure, and 4-day forecasts via Apple Weather. Available in USB-powered or battery-powered versi

Compact Meshtastic LoRa transceiver with nRF52840, SX1262, 1.54\" e-paper display, GPS, and 1200mAh battery for off-grid mesh communication.

Pro Micro drop-in replacement wireless keyboard controller built on the nRF52840 with BLE 5.0, onboard LiPo charger, mid-mount USB-C, and UF2 bootloader. The most popular controller for ZMK wireless s

Compact ESP32-E IoT microcontroller with WiFi 802.11 b/g/n, Bluetooth 4.2, 18 digital I/O, 11 analog inputs, 7 touch pins, 2 DACs, onboard WS2812 RGB LED, GDI display interface, and lithium battery ch

ESP32-S3 dual-core IoT microcontroller with AI acceleration, WiFi 802.11 b/g/n, BLE 5.0, 26 GPIO pins, 20 ADC channels, USB 2.0 OTG, GDI display interface, lithium battery charging, and stamp-hole PCB

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM96 LoRa radio at 433 MHz. Spread-spectrum modulation for long-range links, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

A Raspberry Pi Zero form-factor development board based on the RP2040 dual-core Cortex-M0+ MCU with 16MB flash, Mini HDMI (DVI) output via PIO bitbanging, USB-C, PIO-USB host port, microSD card slot,

ARM Cortex-M0+ Feather board with ATWINC1500 802.11 b/g/n WiFi, 256KB flash, 32KB RAM, 10 analog inputs, and built-in LiPo charger. FCC-certified WiFi for IoT and connected projects.

ARM Cortex-M0+ dev board with Bluetooth LE (nRF51822) in the compact Feather form factor. Features 256KB flash, 32KB RAM, native USB, and a built-in LiPo charger for wireless wearable and IoT projects

ESP32-S2 Feather-format board by Unexpected Maker with 4MB flash, 2MB PSRAM, 5×5 RGB LED matrix, LiPo charging, and STEMMA QT — designed for colorful wearable and IoT projects.

Variant of the Feather M0 WiFi (ATSAMD21 + ATWINC1500) with a u.FL antenna connector instead of a PCB trace antenna, allowing use of an external antenna for improved WiFi range.

RP2040 Feather board with 8 consecutive 5V-level-shifted PIO outputs dedicated to NeoPixel LED strip control, 8MB flash, USB-C, and LiPo charging.

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM69HCW sub-GHz radio at 868/915 MHz. Up to +20 dBm TX power, AES-128 encryption, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

ATmega32u4 Feather board with RFM69HCW sub-GHz radio supporting 868/915 MHz with up to +20 dBm transmit power, AES-128 encryption, and 100mA LiPo charger for long-range IoT sensor networks.

ATmega32u4 Feather board with RFM69HCW sub-GHz radio at 433 MHz with up to +20 dBm transmit power, AES-128 encryption, and built-in LiPo charger for long-range sensor networks in the 433 MHz ISM band.

Feather-format ESP32-S2 board with 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, LiPoly charging, and MAX17048 battery monitor — WiFi IoT in the Feather ecosystem.

RP2040 Feather board with a DVI/HDMI-compatible output port for driving displays at up to 800×480, plus LiPo charging, USB-C, NeoPixel, and STEMMA QT.

Ultra-compact ESP32-S2 development board by Unexpected Maker in the TinyPICO form factor, with 4 MB flash, 2 MB PSRAM, native USB, WiFi, and LiPo charging at just 17.8 × 41 mm.

ATmega32u4 Feather board with RFM95W SX1276 LoRa radio for 868/915 MHz long-range communication. Achieves 2+ km range, supports spreading factors SF6-SF12, and includes a built-in LiPo charger.

RP2040 Feather with integrated RFM69HCW 868/915 MHz packet radio transceiver, 8MB flash, LiPo charging, STEMMA QT, and uFL antenna connector for long-range wireless mesh networks.

ATmega32u4 Feather board with RFM96W SX1278 LoRa radio for 433 MHz long-range communication. Achieves 2+ km range with quarter-wave antennas, supports LoRaWAN, and includes a built-in LiPo charger.

RP2040 Feather with integrated RFM95W LoRa radio at 915 MHz (SX1276), 8MB flash, up to 20 km range, LiPo charging, STEMMA QT, and uFL antenna connector.

RP2040 Feather with a dedicated USB Type-A host port powered by a 5V boost converter, enabling connection to USB devices like keyboards, mice, and MIDI controllers alongside standard USB-C programming

ESP32-S2 Feather with an onboard BME280 temperature, humidity, and barometric pressure sensor, plus 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, and LiPoly charging.

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM69HCW sub-GHz radio at 433 MHz. Up to +20 dBm TX power, AES-128 encryption, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

Ultra-compact ESP32-S3 board by Unexpected Maker in TinyPICO form factor with u.FL external antenna connector, 8MB flash, 8MB PSRAM, LiPo charging, and dual-core 240 MHz.

Unexpected Maker's pro ESP32-S3 Feather board with u.FL external antenna connector, 16MB flash, 8MB PSRAM, dual STEMMA QT connectors, LiPo charging, and dual 700mA regulators.

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM95W SX1276 LoRa radio for 868/915 MHz. Achieves 2+ km range, supports LoRaWAN, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

Unexpected Maker's ProS3 ESP32-S3 with u.FL external antenna, 16MB flash, 8MB PSRAM, 27 GPIO castellated headers, dual LDO regulators, LiPo charging, and STEMMA QT.

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM96W SX1278 LoRa radio for 433 MHz. Achieves 2+ km range, supports LoRaWAN, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

Feather-format ESP32-S3 dual-core 240 MHz board with 8 MB flash, native USB-C, BLE, WiFi, STEMMA QT, LiPoly charging, and MAX17048 — no PSRAM variant for leaner memory budgets.

ESP32-S3 Feather board with 8MB flash, w.FL external antenna connector (MHF3/IPEX3), native USB-C, MAX17048 battery monitor, LiPo charging, NeoPixel, and STEMMA QT.

Ultra-compact ESP32-S3 dev board by Unexpected Maker in the TinyPICO form factor — dual-core 240 MHz LX7, 8 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 17 GPIO, LiPo charging at 35 × 17.8 mm.

Pro ESP32-S3 Feather-form-factor board by Unexpected Maker — dual-core 240 MHz LX7, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 21 GPIO, 2× STEMMA connectors, dual LDOs, LiPo charging.

Unexpected Maker's ultimate ESP32-S3 dev board — dual-core 240 MHz LX7, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 27 GPIO, 2× LDOs, castellated headers, STEMMA, LiPo charging, JTAG.

Feather-format ESP32-S3 board with 4 MB flash and 2 MB PSRAM, dual-core 240 MHz, native USB-C, BLE 5, WiFi, STEMMA QT, LiPoly charging, and MAX17048 battery monitor.

Arduino UNO-compatible Metro board with ESP32-S3 dual-core 240 MHz, 16 MB flash, 8 MB Octal PSRAM, WiFi, BLE 5, native USB-C, STEMMA QT, LiPoly charging, and JTAG debug header.

ATSAMD21G18 ARM Cortex-M0+ Feather board with 2MB SPI flash for CircuitPython code storage, built-in NeoPixel, 256KB flash, 32KB RAM, native USB, and 100mA LiPo charger. The dedicated CircuitPython Fe

ESP32 dual-core 240 MHz Feather board with 802.11b/g/n WiFi, Bluetooth 4.2 Classic and BLE, 4MB flash, 520KB SRAM, 12 ADC channels, 2 DACs, capacitive touch, and built-in LiPo charger.

nRF52832 ARM Cortex-M4F Feather board with native Bluetooth 5 LE at 64 MHz, 512KB flash, 64KB RAM, 8 analog inputs, 12 PWM channels, and built-in LiPo charger. FCC/IC/TELEC certified for production BL

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM69HCW sub-GHz radio at 868/915 MHz. Up to +20 dBm TX power, AES-128 encryption, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM95 LoRa radio at 868/915 MHz. Spread-spectrum LoRa modulation for multi-kilometre range, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

Compact ESP32-S3 + SX1262 LoRa development board with WiFi, BLE 5.0, and integrated battery management. Meshtastic and LoRaWAN compatible, with a slim stick form factor ideal for IoT sensor nodes and