8MB PSRAM

Compact ESP32-S3 development board with wired Ethernet (W5500 SPI), WiFi, BLE, microSD slot, and optional PoE and camera shields for reliable networked IoT edge nodes.

Premium ESP32-S3 smartwatch development platform with 2.06" AMOLED touchscreen, LoRa SX1262, GNSS, NFC, MAX98357A audio, DRV2605 haptic, AXP2101 PMIC, and 1100mAh battery.

ESP32-S3 development board with WiFi HaLow (802.11ah) sub-GHz radio for long-range IoT deployments, plus standard 2.4GHz WiFi, BLE 5.0, microSD, and 18650 battery support.

Upgraded T-Display S3 with a larger 2.33" IPS touchscreen, ESP32-S3R8, OTG charging via SY6970, QWIIC ports, ambient light/proximity sensor, and optional camera module expansion via POGOpin.

ESP32-S3 development board with a 1.64" ICNA3311 AMOLED display at 280×456 resolution, 16MB Flash, 8MB PSRAM, Wi-Fi and Bluetooth 5 LE connectivity.

ESP32-S3 walkie-talkie development board with SA868 UHF/VHF radio module, 0.96" OLED display, rotary encoder, WiFi, BLE, and 18650 battery support for two-way radio projects.

Upgraded T-Beam with ESP32-S3FN8, QMI8658 6-axis IMU, LoRa SX1262, dual GPS options (L76K or u-blox), SoftRF firmware support, and multi-frequency bands for Meshtastic and aircraft tracking.

Compact LoRa pager with ESP32-S3, 2.33" touchscreen, QWERTY keyboard, u-blox GNSS, BHI260AP AI IMU, ES8311 audio codec, RFID/NFC, and foldable antenna for off-grid messaging.

ESP32-S3 smartwatch dev board with LoRa SX1262, GNSS, BMA423 accelerometer, MAX98357A audio, DRV2605 haptic feedback, AXP2101 PMIC, and 940mAh battery for wearable LoRa projects.

Enhanced ESP32-S3 AMOLED development board with 1.91" RM67162 display, onboard RTC, PMU, SD card slot, capacitive touch, metal shielding, and external FPC antenna.

ESP32-S3 keyboard terminal with 3.1" e-paper touchscreen, LoRa SX1262, GPS, BHI260AP AI IMU, PCM5102A/ES8311 audio, 1400mAh battery, and optional 4G LTE (A7682E) for off-grid terminal applications.

Enhanced ESP32-S3 two-way radio board with SA868 UHF/VHF module, L76K GNSS, 1.3" OLED, AXP2102 PMIC, WS2812 RGB LED, TF card, and PPT button for APRS and walkie-talkie applications.

ESP32-S3 multi-protocol RF tool with CC1101 sub-GHz transceiver (300–928 MHz), 13.56 MHz RFID, IR transmit/receive, 1.9" IPS display, and rotary encoder for RF analysis and replay attacks.

Ultra-affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, USB 3.0, QWIIC/Stemma QT connector, power switch, and breadboard-compatible pinout at under $8.

Compact ESP32-S3 board with a 0.75" round 160×160 TFT LCD (GC9D01N), 16MB flash, 8MB PSRAM, WiFi, and BLE 5 for wearable watchface and circular display applications.

ESP32-S3 board with 6 onboard relays, 16MB flash, 8MB PSRAM, WiFi, and BLE for ESPHome smart home automation, controlling lights, appliances, and HVAC systems.

Affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, integrated 18650 battery holder, WiFi, and BLE 5.0 for battery-powered IoT sensor nodes under $10.

Dual-MCU smart panel (ESP32-S3 + ESP32-H2) with 4" 480×480 IPS LCD (ST7701S), WiFi, BLE, native Zigbee/Thread/Matter via H2 co-processor, and optional RS485/CAN FD expansion for wall-mounted smart hom

ESP32-S3 development board with SIM7080G NB-IoT/LTE-M/GNSS module, 16MB flash, 8MB PSRAM, 18650 battery support, and USB-C connectivity for low-power IoT applications.

ESP32-WROVER-E development board with SIM7070G NB-IoT/LTE-M/GPRS modem, GPS, Wi-Fi, Bluetooth 4.2, MicroSD, and solar charging input for ultra-low-power IoT applications.

ESP32-S3 board with SI4732-A10 AM/FM/SW/LW radio receiver, 1.9" IPS display, 900mAh battery, and rotary encoder for a portable software-defined radio experience.

ESP32-S3 development board with a unique wide bar-format display, 16MB flash, 8MB PSRAM, and USB-C for information display and custom UI projects.

Compact ESP32-S3 development board featuring a 1.47" RM67162 AMOLED display with QSPI interface, 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and battery charging support.

LILYGO T-FPGA is a development board combining an ESP32-S3 microcontroller with a Gowin GW1NSR-4C FPGA chip, enabling flexible hardware logic design alongside Wi-Fi and Bluetooth connectivity.

Advanced ESP32-S3 programmable keyboard board with 4 built-in 0.85" TFT displays, 14 RGB LEDs, rotary encoder, STM32 co-processor, magnetic connectors for daisy-chaining up to 6 units.

ESP32-S3 development board with an elongated 3.4" capacitive touch TFT LCD (180×640 resolution), 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and optional enclosure variant.

ESP32-based development board with SIM7600E-H 4G LTE Cat-4 modem, GPS, Wi-Fi, Bluetooth, 18650 battery holder with solar charging, and dual USB-C ports for high-speed IoT connectivity.

ESP32 development board with 4 onboard HRS4H-S-DC5V relays, 4MB flash, 8MB PSRAM, WiFi, BLE 4.2, and optocoupler-isolated GPIO expansion — designed for wireless remote switch control of AC/DC loads.

ESP32-WROVER-E development board with A7670E LTE Cat-1 modem supporting voice calls, SMS, and GPS positioning. Available with multiple regional frequency variants for global 4G deployments.

LILYGO T4 is an ESP32 development board with 8MB PSRAM, optional 2.2 or 2.4-inch ILI9341 TFT LCD display, Wi-Fi, Bluetooth 4.2 BLE, and Li-Po battery support.

ESP32-S3 camera development board with mPCIe slot for LILYGO T-PCIE SIM cellular modules, supporting OV2640 or OV5640 cameras, 16MB flash, 8MB PSRAM, TF card, and I2S microphone for connected vision a

ESP32-S3 smart rotary encoder knob with 1.2-inch round AMOLED display, capacitive touch, buzzer, vibration motor, and dual Qwiic connectors — ideal for smart home control and media interfaces.

ESP32-WROVER-E development board with A7608E-H LTE Cat-1 modem supporting voice, SMS, GPS, and multi-band LTE-FDD/TDD connectivity for Europe with 18650 battery support.

LILYGO T-TWR Rev2.1 is an ESP32-S3 based programmable walkie-talkie board featuring the SA868 UHF/VHF radio module, GPS, OLED display, and battery support for amateur radio applications.

ESP32 development board with LAN8720 Ethernet, 16MB flash, 8MB PSRAM, WS2812 RGB LED, SIM/TF card slots, and T-PCIE expansion support for industrial IoT, wired networking, and CAN bus applications.

ESP32-WROVER development board with 0.96-inch OLED display, five-way directional button, single 18650 battery holder, 8MB PSRAM, WiFi, and BLE 4.2 — a compact handheld IoT controller in a slim form fa

ESP32-S3 industrial communication board with three RS485 ports and one CAN bus — enables multi-protocol data switching for automation, sensor networks, and legacy equipment integration.

ESP32-S3 camera development board with 8MB PSRAM, 16MB Flash, onboard microphone, MAX98357A I2S amplifier, speaker output, and choice of OV2640 or OV5640 camera sensor for audio-visual IoT application

LILYGO T5 E-Paper S3 Pro is an ESP32-S3 board with a 4.7-inch 16-greyscale e-paper display, SX1262 LoRa, touch input, RTC, BQ25896/BQ27220 battery management, 16MB flash, 8MB PSRAM, and optional GPS.

ESP32-S3 three-board stack with SX1262 LoRa, CAN, RS485, RS232, Ethernet (W5500), relay, capacitive touch LCD, and DC input — a versatile industrial IoT gateway with long-range wireless.

ESP32-S3R8 development board with a 1.1-inch JD9613 AMOLED display (126×294), onboard trackball, 16MB flash, 8MB PSRAM, WiFi, and BLE 5 — a compact touchless navigation dev kit for creative UI and int

Updated ESP32 Mini32 development board with 8MB PSRAM, 4/16MB Flash options, dual-core 240MHz, CH9102 USB-serial, WiFi, BLE 4.2, and 1.25mm JST LiPo connector in a 40×31mm breadboard-friendly footprin

LILYGO T-2CAN is an ESP32-S3 development board featuring dual CAN bus interfaces via two TWAI controllers, Wi-Fi, Bluetooth 5 LE, and wide DC input range for automotive and industrial applications.

ESP32-S3-WROOM-1 development board with MAX13487E RS-485 transceiver, T-PCIE SIM expansion slot, Grove connector, WiFi, and BLE — designed for vending machine control and industrial RS-485 communicati

ESP32-WROVER-E development board with LAN8720 Ethernet, IEEE 802.3 af/at Power over Ethernet (5V@4A, 44–57V input), 16MB flash, 8MB PSRAM, WiFi, BLE 4.2, and expandable LCD interface for wired IoT gat

LILYGO T4 S3 is an ESP32-S3 development board with a 2.41-inch AMOLED touchscreen (450x600), 16MB flash, 8MB PSRAM, microSD slot, Wi-Fi, and Bluetooth 5 LE.

ESP32 + SX1276 LoRa T-Beam variant optimized for the Helium IoT network — with NEO-6M GPS, AXP2101 PMU, and 18650 battery support for portable LoRaWAN network mapping and sensor nodes.

LILYGO T-Beam BPF is an ESP32-S3 LoRa development board variant featuring an onboard Band Pass Filter for improved RF selectivity, designed for the 144–148 MHz amateur radio band with GPS and OLED dis

High-end ESP32-S3 Ethernet development board with W5500 SPI Ethernet, Power-over-Ethernet support, 16MB flash, 8MB PSRAM, and modular LoRa/LTE expansion shield system.

LILYGO T-Beam 1W is an ESP32-S3 LoRa development board featuring a 1-watt LoRa power amplifier for significantly extended transmission range, with GPS support, AXP2101 PMU, and 18650 battery compatibi

Compact USB dongle with ESP32-C5 featuring dual-band WiFi 6 (2.4/5GHz), Bluetooth 5, 802.15.4, 0.96-inch LCD, TF card slot, and 16MB flash — the first LILYGO dongle with WiFi 6 support.

ESP32-WROVER-E development board with 8 optocoupler-isolated 5V relay channels (HRS4H-S-DC5V), Wi-Fi, BLE 4.2, 8MB PSRAM, and support for DC 12–24V power input for industrial automation.

ESP32-P4 high-performance board with ESP32-C6 WiFi HaLow (802.11ah), 16MB flash, 8MB PSRAM, H.264 1080P video processing, MIPI-CSI/DSI, and BLE 5 — designed for long-range sub-GHz WiFi IoT application

ESP32-S3 touch-sensitive bar display board with 8MB PSRAM, 16MB Flash, Wi-Fi, and Bluetooth 5, available in LED and AMOLED display variants for building custom HMI panels, smart home controls, and int

ESP32 development board with SIM800L 2G GSM/GPRS cellular modem, Wi-Fi, Bluetooth 4.2, USB-C charging, and Li-Po battery connector for IoT devices requiring SMS and GPRS data connectivity.

Dual-MCU development board combining ESP32 and KENDRYTE K210 RISC-V AI processor with OV2640 camera, 1.54" IPS touchscreen, I2S audio amplifier, motor driver, 6-axis IMU, and Wi-Fi for edge AI and rob

ESP32-S3 e-paper development board with 4.7-inch 540×960 16-grayscale display (EDO47TC1), Wi-Fi, Bluetooth 5.0, PCF8563 RTC, 16MB flash, 8MB PSRAM, and optional capacitive touch overlay.

ESP32-S3 dev board with 7" capacitive touch IPS display (800x480), CAN/RS485 interfaces, and battery support. Built for HMI panels, industrial control, and IoT dashboards.

Third-generation M5Stack Core with ESP32-S3 dual-core 240MHz, 2.0\" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, RTC, 5

ESP32-based IoT dev kit with 2.0" IPS capacitive touch display, 16MB flash, 8MB PSRAM, built-in mic, speaker, IMU, vibration motor, and 390mAh battery in a compact stackable enclosure.

ESP32-S3 smart rotary knob with 1.28" round GC9A01 touch display (240x240), rotary encoder, RFID reader (WS1850S), RTC (BM8563), buzzer, and 2 Grove ports for IoT control interfaces.

Dual-MCU IoT development platform featuring ESP32-S3 and RP2040 processors with a 4-inch capacitive touchscreen, WiFi, BLE, optional LoRa, and multiple Grove sensor connectors for IoT prototyping.

Ultra-compact ESP32-PICO smart speaker dev kit (24x24mm) with built-in microphone, speaker, RGB LED, button, and Grove port. Ideal for voice assistant and audio streaming projects.

Ultra-compact ESP32-S3 development board with OV2640 camera, digital microphone, 8MB PSRAM, 8MB flash, WiFi 802.11 b/g/n, BLE 5.0, extended GPIO, and battery charging — ideal for AI and IoT edge proje

Ultra-compact ESP32-PICO dev board (24x24mm) with 5x5 RGB LED matrix, 6-axis IMU (MPU6886), IR LED, programmable button, and Grove port. Perfect for LED displays and motion sensing.

ESP32-S3 development board with integrated OV2640 camera, 16MB flash, 8MB PSRAM, WiFi and BLE connectivity. Designed for AIoT applications, computer vision, and edge AI projects.

ESP32-S3 development board with a 3.5" capacitive touch IPS LCD (480x320), 16MB flash, and 8MB PSRAM. Popular for building custom HMI/UI projects with LVGL, smart home panels, and IoT dashboards.

ESP32-S3 smart speaker dev kit with ES7210 audio codec, NS4168 amplifier, dual MEMS microphones, and RGB LED. Designed for Home Assistant voice assistant, ESPHome, and audio streaming projects.

ESP32-S3 dev board with 3.49" capacitive touch IPS display, dual microphone array, 6-axis IMU, RTC, and battery support. Ideal for wearable UIs and compact IoT dashboards.

Compact ESP32-S3 dev board by Waveshare in Arduino Nano form factor. Features dual-core 240MHz LX7, 16MB flash, 8MB PSRAM, WiFi, BLE 5.0, and USB-C. Drop-in ESP32-S3 upgrade for Nano-sized projects.

ESP32-S3 based multi-mode BLE detection and security research tool with integrated piezo buzzer, MMCX antenna connector, and seven swappable firmware modes for surveillance detection, drone tracking,

All-in-one robotics development board with ESP32-S3 (16MB flash, 8MB PSRAM), four-channel 2.5A motor driver, OV2640 camera, WiFi, Bluetooth 5, microSD, and GDI display connector for building smart rob

ESP32-S3 AI camera module with 2MP wide-angle night vision sensor, I2S speaker and microphone, ambient light sensor, WiFi/BLE 5.0, and edge AI inference support in a 42x42mm package.

ESP32-S3 AIoT camera board with 5MP OV5640 autofocus camera, dual-microphone array with noise cancellation, ES8311 audio codec, NS4150B speaker amplifier, battery charging, and display/camera expansio

ESP32-S3 AI smart speaker development board with dual-microphone array, ES8311 audio codec, 7 surround RGB LEDs, RTC, camera and LCD expansion interfaces, and LiPo battery support for voice assistant

Industrial ESP32-S3 controller with 8-channel optocoupler-isolated digital inputs (5-36V), 8-channel Darlington outputs (500mA each), PoE Ethernet (W5500), isolated RS-485 and CAN bus, RTC, and DIN ra

Ultra-compact ESP32-S3 board by Unexpected Maker in TinyPICO form factor with u.FL external antenna connector, 8MB flash, 8MB PSRAM, LiPo charging, and dual-core 240 MHz.

Unexpected Maker's pro ESP32-S3 Feather board with u.FL external antenna connector, 16MB flash, 8MB PSRAM, dual STEMMA QT connectors, LiPo charging, and dual 700mA regulators.

Unexpected Maker's ProS3 ESP32-S3 with u.FL external antenna, 16MB flash, 8MB PSRAM, 27 GPIO castellated headers, dual LDO regulators, LiPo charging, and STEMMA QT.

Feature-rich ESP32 IoT dev kit with 2.0" IPS display, 8MB PSRAM, 16MB flash, MPU6886 IMU, BMM150 magnetometer, 10x SK6812 RGB LEDs, microphone, speaker, microSD, 500mAh battery, and M5GO charging base