Klipper

32-bit 3D printer control board powered by STM32F407ZGT6 @ 168MHz. Supports 6 stepper drivers, triple extruder, dual Z, 12–24V input. Compatible with Marlin and Klipper firmware.

32-bit 3D printer control board with LPC1769 @ 120MHz. Supports 5 stepper driver sockets, dual Z, 12–24V, TMC2209 UART. Popular Marlin and Klipper compatible upgrade board.

Ultra-quiet 32-bit 3D printer board with 4 integrated TMC2209 UART stepper drivers. STM32F103RCT6 @ 72MHz. Direct drop-in replacement for Ender 3. Supports Marlin and Klipper.

High-voltage 3D printer control board with STM32H723ZE MCU, 8 stepper driver slots supporting up to 60V motor power, CAN bus, PT100/PT1000 support, and Marlin/Klipper/RRF firmware.

High-end 32-bit 3D printer control board with STM32H723ZET6 MCU at 550MHz, 10 EZ-socket stepper driver slots, CAN bus, eFuse protection, and Marlin/Klipper firmware support.

Improved 32-bit control board with 4 integrated TMC2209 UART drivers, dual Z ports, and STM32F103RCT6 @ 72MHz. Drop-in upgrade for Ender 3, CR-10S, Ender 5. Marlin and Klipper ready.

Latest 32-bit SKR Mini E3 with STM32G0B1RET6 @ 64MHz, 4 integrated TMC2209 UART drivers, USB-C, and CAN bus support. Compact Ender 3 drop-in upgrade. Marlin and Klipper compatible.

Single board computer by BigTreeTech with Allwinner H616 quad-core Cortex-A53, 1GB DDR3L RAM, WiFi, 100Mbps Ethernet, and 40-pin GPIO. Drop-in Raspberry Pi CM4 alternative for Klipper 3D printing.

8-axis Klipper-native 3D printer control board with STM32G0B1VET6 MCU, BTB connector for CM4/CB1, CAN bus, eFuse protection, Ethernet, and selectable CNC fan voltage.

Compact 32-bit 3D printer control board powered by RP2040 @ 133MHz. Designed for Voron 0.1 and small printers. 4 TMC2209 sockets, USB-C, 12–24V input. Klipper and Marlin compatible.

Compute module by BigTreeTech powered by Rockchip RK3566 quad-core Cortex-A55 at 1.8GHz, 2GB/4GB LPDDR4, 32GB eMMC, Gigabit Ethernet, WiFi 5 (802.11ac), and Bluetooth 5.2. CM4-form-factor.

High-performance 32-bit 3D printer board with STM32H743VI @ 480MHz, 5 driver slots, CAN bus, FDCAN, WiFi module support, 12–24V, 10A bed output. Marlin, Klipper, and RepRapFirmware compatible.

32-bit 3D printer control board with STM32F446ZET6 MCU, 8 stepper driver slots (9 outputs), CAN bus via RJ11, USB-C, WiFi header, and support for Marlin and Klipper firmware.

Advanced 32-bit 3D printer board with STM32H743VI @ 480MHz and EZ driver system (tool-free). 5 EZ driver slots, CAN/FDCAN, WiFi module support, 10A bed, 12–24V. Marlin, Klipper, RRF ready.

7-inch all-in-one 3D printer control panel with 1024x600 IPS touchscreen, pre-installed CB1 core board running Klipper, Ethernet, WiFi, 3x USB 2.0, CAN bus, and built-in speaker.

3.5-inch dual-mode 3D printer display with STM32 processor supporting both touchscreen TFT mode and classic 12864 LCD mode. Compatible with Marlin and most BIGTREETECH control boards.

Klipper-native 3D printer control board with STM32G0B0RE MCU and BTB connector for Raspberry Pi CM4 or BTT CB1, 4 stepper driver slots, Ethernet, USB-C, and CAN bus support.

3.5-inch dual-mode display designed as a direct replacement for the Ender 3 stock LCD. STM32 based with touchscreen TFT and 12864 emulation modes, supports SD and USB printing.

Larger-format dual-mode 3D printer displays in 4.3-inch, 5-inch, and 7-inch variants. STM32-based with touchscreen TFT and 12864 LCD emulation modes, SD/USB printing, compatible with Marlin.

Klipper-ready 3D printer control board for Ender 3/5 with STM32G0B1 MCU, BTB connector for CM4/CB1, 5 EZ stepper slots, CAN bus, and direct Ender 3 compatibility.

3.5-inch 480x320 SPI touchscreen display for 3D printers, designed for CB1-based boards. Uses ILI9488 SPI LCD driver and NS2009 I2C touch controller, includes an IO2CAN module option.

Compact 32-bit 3D printer control board with STM32G0B1VET6 MCU, 5 stepper driver slots, CAN-FD bus, USB-C, and support for both Marlin and Klipper firmware.

4.3-inch 800x480 IPS capacitive touchscreen expansion board for BTT Pi, CB1, CB2, and Raspberry Pi CM4. Connects via 40-pin GPIO DPI interface with GT911 touch controller for Klipper UI.

ESP8266-based WiFi transceiver expansion module for BTT 3D printer control boards. Available in ESP12S and ESP-07 variants, enabling wireless connectivity and remote control via serial UART.

5-inch 800x480 IPS HDMI capacitive touchscreen display. Compatible with Raspberry Pi, BTT SBCs, and any HDMI source. USB-C data port, 3.5mm audio jack, 5-point touch, auto-driver on PC.

7-inch 1024x600 IPS HDMI capacitive touchscreen display. Universal compatibility with Raspberry Pi, BTT SBCs, and any HDMI source. USB-C touch, 3.5mm audio output, 5-point touch, 160° viewing angle.

NEMA 17 (42mm) stepper motor closed-loop driver board with OLED display. Uses encoder feedback to eliminate missed steps and improve high-speed 3D printer and CNC motor performance.

CAN bus toolhead board for 36/42mm stepper extruders. Features STM32G0B1 MCU, onboard TMC2209, ADXL345 accelerometer, PT100/PT1000 support, and USB/CAN connectivity for Klipper 3D printers.

5-inch 800x480 IPS WiFi touchscreen for Bambu Lab X1, P1, and A1 series 3D printers. ESP32-S3 based, 16MB flash, 8MB PSRAM, built-in battery for portable use, supports up to 4 printers simultaneously.

RP2040-based ADXL345 accelerometer board for Klipper input shaping and resonance compensation on 3D printers. Connects via USB Type-C with ESD protection. Board size: 33.25 × 15.5mm.

Toolhead board designed for the Voron StealthBurner. Powered by RP2040, supports CAN and USB, includes TMC2209, ADXL345 accelerometer, and PT100/PT1000 for Klipper 3D printers.

5-inch 800x480 IPS WiFi touchscreen controller for Klipper printers. ESP32-S3 based, 16MB flash, 8MB PSRAM, built-in battery for 30 minutes portable use, supports up to 50 Klipper printers.

Compact automatic bed leveling probe for 3D printers including Ender-3, B1, and H2 extruder platforms. Supports Voron Stealthburner, EVA, and other popular toolhead mounts. Open source hardware.

CAN bus control board for the Enraged Rabbit Carrot Feeder (ERCF) multi-material system. Features STM32G0B1 MCU, 4 EZ stepper driver slots, USB/CAN connectivity, and full Klipper support.

1.28-inch round 240x240 LCD display for Voron StealthBurner toolhead. ESP32 MCU with WiFi and Bluetooth LE, shows print status, temperatures, and progress with customizable animated UI.

Eddy current inductive bed leveling probe for Klipper 3D printers. Offers 0.5μm precision, rapid bed mesh scanning, temperature compensation (USB), and works as Z-endstop. Mounts on standard Voron X c

1.28-inch round 240x240 display for Bambu Lab A1, X1, and P1 series printers. ESP32 MCU with 2.4GHz WiFi, customizable GIF animations, shows print status and temperatures wirelessly.

4-port USB 2.0 hub for Klipper-based 3D printers with dual 24V/5V power input support. Expands a single USB host port to connect multiple peripherals like ADXL345, EBB boards, and cameras simultaneous

Supercapacitor-based power loss recovery module for Klipper 3D printers. Provides ~13 seconds of 5W backup power via dual 2.7V 20F supercaps, enabling safe shutdown on power failure.

CAN bus power distribution and expansion board for BigTreeTech toolhead boards. Provides multiple 24V + CAN pass-through ports to daisy-chain toolhead boards in Klipper 3D printer setups.

RP2040-based handheld button board with 7 mechanical switches and RGB NeoPixel LEDs for manual control of Klipper 3D printers. Triggers homing, heating, motor disable and other macros via USB.