Open Hardware Directory

Ultra-compact ESP32-S3 dev board (24x24mm) with 0.85" IPS LCD (128x128), 6-axis IMU, 8MB flash, Wi-Fi, BLE 5.0, USB-C, and Grove port. Ideal for IoT prototyping and embedded UI projects.

Compact ESP8266 WiFi IoT microcontroller with Tensilica L106 at 80/160MHz, 16MB flash, 50KB SRAM, 10 digital I/O, onboard LiPo charging, 46uA low-power mode, OTA updates, and Arduino/MicroPython suppo

Large-screen IoT display board with ATSAMD51J20 + ESP32 WiFi coprocessor, 3.5" 320×480 resistive touchscreen TFT, 8MB Flash, microSD, speaker, and USB-C. Designed for Python-powered internet-connected

ESP32-S3 dual-core IoT microcontroller with AI acceleration, WiFi 802.11 b/g/n, BLE 5.0, 26 GPIO pins, 20 ADC channels, USB 2.0 OTG, GDI display interface, lithium battery charging, and stamp-hole PCB

Round educational microcontroller with Nordic nRF52840 (64MHz Cortex-M4F + BLE), 10 NeoPixels, accelerometer, microphone, light sensor, speaker, 8 alligator-clip I/O pads, and USB. Runs CircuitPython,

ESP32-based dual-relay WiFi/BLE smart switch with per-channel power monitoring via ADE7953, cover/shutter control mode, and 10A per channel. Flashable with Tasmota for local roller blind and dual ligh

High-performance Rockchip RK3588S edge gateway with 8GB LPDDR4X, 4x Gigabit Ethernet ports (RTL8367RB switch), PCIe expansion, USB 3.0, HDMI, and 12V DC power — built for demanding network and edge AI

DFRobot solar energy harvesting and battery management module with MPPT for 12V lead-acid batteries. Designed for outdoor IoT deployments, environmental monitoring stations, and off-grid solar-powered

LILYGO T-OI Plus is a compact ESP32-C3 development board with Wi-Fi, BLE 5.0, Grove connectors, and optional 16340 battery holder, designed to fit Sonoff BASICR2 enclosures.

LILYGO T5 E-Paper S3 Pro is an ESP32-S3 board with a 4.7-inch 16-greyscale e-paper display, SX1262 LoRa, touch input, RTC, BQ25896/BQ27220 battery management, 16MB flash, 8MB PSRAM, and optional GPS.

ESP32-S3 USB-A dongle with a 0.96-inch ST7735 color display (80×160), 16MB flash, WiFi, and BLE 5.0 — a compact plug-in development stick for IoT, media, and wireless sensor nodes.

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM69HCW sub-GHz radio at 433 MHz. Up to +20 dBm TX power, AES-128 encryption, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

Credit-card sized Rockchip RK3566 SBC with up to 4GB LPDDR4, eMMC, microSD, WiFi 5, Bluetooth 5.0, and USB-C OTG — a compact headless Linux board with no Ethernet port.

Enhanced ESP32-S3 two-way radio board with SA868 UHF/VHF module, L76K GNSS, 1.3" OLED, AXP2102 PMIC, WS2812 RGB LED, TF card, and PPT button for APRS and walkie-talkie applications.

Open-source ESP32 Teleinfo reader board for French Linky energy meters. Pre-flashed with Tasmota, features USB-C, WiFi, QWIIC I2C port, and RGB LED. Reads both Standard and Historique TIC formats.

Ultra-compact ESP32-H2 dev module with Thread 1.4, Zigbee 3.0, Matter, and BLE 5 — featuring a Grove port, IR transmitter, and RGB LED in a stamp-sized 23.5×12mm form factor.

Ultra-compact LoRa/LoRaWAN module based on the ASR6502 SoC (ARM Cortex-M0+ @ 48MHz + SX1262), designed for SMT integration into custom IoT sensor nodes with 3.5uA deep sleep current.

Color 1.77-inch TFT LCD display module with 128x160 pixel resolution and ST7735 driver. SPI interface for fast refresh rates, capable of displaying full-color graphics, images, and UI elements.

Smart rotary encoder controller based on ESP32-C6 with WiFi 6, BLE 5, Zigbee/Thread, 4 RGB LEDs, buzzer, and magnetic Hall-effect knob for wireless volume control and smart home automation.

Simplified T-Echo with nRF52840, SX1262 LoRa, and optional L76K GPS — a low-cost, low-power LoRa node and Meshtastic-compatible board for off-grid mesh networking.

LILYGO T-Beam BPF is an ESP32-S3 LoRa development board variant featuring an onboard Band Pass Filter for improved RF selectivity, designed for the 144–148 MHz amateur radio band with GPS and OLED dis

Tiny 31×15mm Arduino-compatible microcontroller with ATtiny85 at 8–16 MHz, 5V logic, 8KB flash, 3 GPIO pins, and Micro USB — the 5V variant for interfacing with 5V sensors and NeoPixel LEDs.

The FeatherS3[D] is Unexpected Maker's Feather-form ESP32-S3 board with a dual antenna system (onboard + u.FL, software-switchable), I2C battery fuel gauge, 16MB flash, 8MB PSRAM, two STEMMA QT connec

5-inch 800x480 IPS HDMI capacitive touchscreen display. Compatible with Raspberry Pi, BTT SBCs, and any HDMI source. USB-C data port, 3.5mm audio jack, 5-point touch, auto-driver on PC.

Compact ItsyBitsy-format ESP32 board with 8MB flash, 2MB PSRAM, w.FL external antenna connector, Wi-Fi + Bluetooth Classic + BLE, 20 GPIO, NeoPixel, STEMMA QT, and Micro-B USB.