Open Hardware Directory

Compact 0.91-inch monochrome OLED display module with 128x32 pixel resolution and SSD1306 driver. Communicates over I2C interface, ideal for small status readouts and embedded projects.

ESP8266-based WiFi expansion module for RepRapFirmware (Duet-style) boards. Adds wireless connectivity to BTT SKR V1.3, SKR V1.4 Turbo, and compatible boards running RRF or Marlin firmware.

ESP32 + DW3000 UWB development board for centimeter-accurate indoor positioning and ranging. Supports UWB channels 5 and 9, FiRa compatible, Apple U1 interoperable. WiFi and Bluetooth for data relay.

Zigbee 3.0 two-way smart switch in a tiny form factor that fits behind existing wall switches. Supports external switch input and works with Home Assistant, SmartThings, and other Zigbee hubs.

Open source USB-to-serial adapter and ESP32 programmer featuring a genuine Silabs CP2102N chip, USB-C connector, auto-reset circuitry, 3.3V 500mA regulator, and ESD/overcurrent protection.

Handheld gaming console and dev board powered by ATSAMD51J19 (120MHz Cortex-M4F) with a 1.8" TFT display, 5 NeoPixels, accelerometer, and Feather-compatible headers. Runs MakeCode Arcade, CircuitPytho

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM96W SX1278 LoRa radio for 433 MHz. Achieves 2+ km range, supports LoRaWAN, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

Industrial-grade embedded computer module with BCM2711 quad-core Cortex-A72 @ 1.5GHz, 1–8GB LPDDR4 RAM, optional 8–32GB eMMC and optional dual-band WiFi + Bluetooth 5.0. Available in 32 hardware varia

NASA-themed DIY robotics kit with ESP32-S3, camera, dual DC motors, 3 servos, and WiFi/BLE. Build a programmable Mars Rover replica with robotic arm and live video feed.

ESP32-based MicroPython IoT module with 802.11b/g/n WiFi, Bluetooth LE and Classic, 8MB flash, 4MB RAM, and ultra-low power ULP co-processor for deep-sleep GPIO monitoring at 25 µA.

Popular low-cost development board based on the STM32F103C8T6 ARM Cortex-M3 microcontroller running at 72 MHz. Features 64 KB flash, 20 KB SRAM, and extensive peripheral support for embedded developme

ATSAMD21G18 ARM Cortex-M0+ Feather board with 2MB SPI flash for CircuitPython code storage, built-in NeoPixel, 256KB flash, 32KB RAM, native USB, and 100mA LiPo charger. The dedicated CircuitPython Fe

ESP32-C6 based WiFi smart switch for single live wire AC power control. Supports WiFi 6 and Zigbee 3.0, fits standard wall boxes for home automation.

Raspberry Pi HAT-compatible edge AI SBC by BeagleBoard.org, powered by the TI AM67A SoC with 4 TOPS neural accelerator, 4GB LPDDR4, 16GB eMMC, WiFi, and Gigabit Ethernet.

Texas Instruments SK-AM62B Starter Kit — dual-core Cortex-A53 Sitara developer evaluation board for industrial HMI and IoT applications, running Armbian Linux.

ESP32-WROVER-E development board with SIM7070G NB-IoT/LTE-M/GPRS modem, GPS, Wi-Fi, Bluetooth 4.2, MicroSD, and solar charging input for ultra-low-power IoT applications.

Compact ESP32-PICO-D4 development board with integrated 1.14-inch ST7789V IPS LCD (135×240, 260 PPI), WiFi, Bluetooth 4.2/BLE, and Arduino/MicroPython support.

ESP32-S3 development board with 1.9-inch ST7789V TFT display (170×320), optional capacitive touch, 16MB flash, 8MB PSRAM, and USB-C. Popular for smart displays and IoT dashboards.

ESP32-C5 RISC-V development kit with dual-band WiFi 6 (2.4/5GHz), BLE 5, Zigbee 3.0, Thread 1.3, and Matter support. Features solar charging, 21uA deep sleep, IO expansion board, and 18 digital I/O pi

All-in-one ATmega32u4 learning board with 10 NeoPixels, LIS3DH accelerometer, microphone, speaker, light and temperature sensors, and 8 capacitive touch pads in a circular 2-inch form factor.

64-core RISC-V workstation mATX motherboard with SOPHON SG2042 @ 2GHz, up to 128GB DDR4 ECC, PCIe 4.0 x16, 5x SATA, 8x USB 3.0, dual 2.5GbE for native RISC-V development.

Open-source KVM-over-USB device for controlling headless computers from your laptop. Features HDMI capture up to 1080p 25fps, virtual keyboard/mouse via USB HID, and a browser-based interface requirin

RK3568B2 router board with quad-core Cortex-A55 at 2.0GHz, up to 4GB RAM, 32GB eMMC, native GbE + dual 2.5GbE, M.2 PCIe, 2x USB 3.0, HDMI 4K, and USB-C PD — the mid-range OpenWrt router with long-term

Wireless microcontroller board featuring the RP2040 dual-core Cortex-M0+ processor with built-in WiFi 4 and Bluetooth 5.2 (BLE). Supports MicroPython, CircuitPython, and C/C++ development.

Compact LoRa pager with ESP32-S3, 2.33" touchscreen, QWERTY keyboard, u-blox GNSS, BHI260AP AI IMU, ES8311 audio codec, RFID/NFC, and foldable antenna for off-grid messaging.