Open Hardware Directory

Ultra-compact Matter/Thread/BLE development board based on Silicon Labs MGM240S, bringing official Matter support to the beloved Arduino Nano form factor at 45×18mm.

ESP32-S3R8 development board with a 1.1-inch JD9613 AMOLED display (126×294), onboard trackball, 16MB flash, 8MB PSRAM, WiFi, and BLE 5 — a compact touchless navigation dev kit for creative UI and int

Popular 0.96-inch monochrome OLED display with 128x64 pixel resolution and SSD1306 driver IC. I2C interface with wide library support, the go-to display for Arduino and ESP32 projects.

Ultra-compact ESP32 development board with W5500 SPI Ethernet, 0.96" OLED display, Wi-Fi, Bluetooth 4.2, and USB-C. Only 29.5×23mm for embedded IoT gateway projects.

WiFi HaLow (802.11ah) router and IoT gateway with 2.4GHz dual-band, up to 1km+ range, mesh networking, Ethernet, and OpenWrt-compatible MT7628 SoC.

Li-Ion/LiPo battery charging module based on the TP4056 IC with built-in battery protection circuit. Mini USB 5V input, 1A charging current. Essential for portable and battery-powered IoT projects.

ESP32-S3 keyboard terminal with 3.1" e-paper touchscreen, LoRa SX1262, GPS, BHI260AP AI IMU, PCM5102A/ES8311 audio, 1400mAh battery, and optional 4G LTE (A7682E) for off-grid terminal applications.

Open-source 5-bay NAS server board by Kobol, powered by the Rockchip RK3399 SoC, 4GB LPDDR4, eMMC, WiFi 5+BT 5.0, 2.5GbE, 5× SATA, and 12V DC — a high-performance personal cloud storage platform.

ESP32 development board with integrated 0.96-inch SSD1306 OLED display, 4MB Flash, 520KB SRAM, WiFi, Bluetooth dual-mode, USB-C, and onboard LiPo battery charging for compact IoT display projects.

Espressif's multimedia-focused ESP32-S2 evaluation platform bundling four extension boards: audio player, capacitive touch panel, 3.2" LCD display, and camera module. Designed to showcase ESP32-S2 hum

Raspberry Pi Zero-shaped development board with RP2350B MCU, 16MB flash, mini-HDMI DVI output, microSD card slot, PIO-USB port, lithium battery header, and 40-pin Raspberry Pi HAT-compatible GPIO head

Tiny 22.86mm AI vision module with STM32H747 dual-core Cortex-M7/M4, 2MP camera, WiFi/BLE, 6-axis IMU, microphone, and time-of-flight sensor — runs TinyML image recognition and OpenMV/MicroPython at t

RISC-V + FPGA single board computer powered by Microchip PolarFire MPFS025T with 4x RV64GC U54 cores at 667MHz, 23K FPGA logic elements, 2GB LPDDR4, 16GB eMMC, Gigabit Ethernet, M.2 E-Key, and BeagleB

ESP32-S3 based LoRa development board with built-in 0.96" OLED display, SX1262 LoRa transceiver, WiFi, BLE 5.0, USB-C, and LiPo battery charging. One of the most popular boards for Meshtastic.

Open-source 1U CubeSat educational kit powered by Arduino Pro Mini with LoRa communication, multi-sensor payload (IMU, barometer, GPS, temperature), solar-powered EPS, and ground station dashboard for

LILYGO T-MixRF is a multi-protocol RF development board combining SX1262 LoRa sub-GHz radio with CC1101 FSK/OOK transceiver for versatile wireless protocol support and RF experimentation.

Compact ItsyBitsy-format ESP32 board with 8MB flash, 2MB PSRAM, PCB antenna, Wi-Fi + Bluetooth Classic + BLE, 20 GPIO, NeoPixel, STEMMA QT, and Micro-B USB.

Compact 32-bit 3D printer control board with STM32G0B1VET6 MCU, 5 stepper driver slots, CAN-FD bus, USB-C, and support for both Marlin and Klipper firmware.

Palm-sized x86 SBC with Intel N150 quad-core (up to 3.6GHz), 16GB LPDDR5, 128GB eMMC, RP2040 co-processor, Gigabit Ethernet, HDMI 2.1, and Windows 11 IoT Enterprise — in the classic LattePanda V1 form

Tiny Rockchip RK3308 quad-core SBC with up to 512MB DDR3, 8GB eMMC, microSD, 100Mbps Ethernet, USB 2.0, optional WiFi/BT, and USB-C — a miniature Linux board for audio and IoT projects.

High-voltage 3D printer control board with STM32H723ZE MCU, 8 stepper driver slots supporting up to 60V motor power, CAN bus, PT100/PT1000 support, and Marlin/Klipper/RRF firmware.

Tiny RP2040-based dev board in the QT Py / Seeed XIAO form factor, featuring 8MB flash, USB-C, a NeoPixel, and a STEMMA QT connector for solderless I2C sensor wiring.

ATmega32u4 Feather board with RFM96W SX1278 LoRa radio for 433 MHz long-range communication. Achieves 2+ km range with quarter-wave antennas, supports LoRaWAN, and includes a built-in LiPo charger.

1.28-inch round 240x240 LCD display for Voron StealthBurner toolhead. ESP32 MCU with WiFi and Bluetooth LE, shows print status, temperatures, and progress with customizable animated UI.

ESP32-S3 all-in-one media board with 1.9-inch TFT display, rotary encoder, dual microphones, 1W speaker, 7 RGB LEDs, GROVE connector, and LiPo battery support — ideal for audio players and interactive