Open Hardware Directory

Upgraded ESP32-S3R2 + SX1262 LoRa dev board with 2MB PSRAM, 16MB flash, 0.96" OLED, switchable FPC/IPEX 2.4G antenna, GNSS interface, and solar input. Meshtastic and LoRaWAN ready.

ESP32 development board combining LoRa radio (SX1276/SX1278), u-blox NEO-6M GPS, 0.96" OLED display, and 18650 battery support — the go-to board for Meshtastic and LoRa tracking projects.

ESP32-S3 industrial communication board with three RS485 ports and one CAN bus — enables multi-protocol data switching for automation, sensor networks, and legacy equipment integration.

Feather-format ESP32-S3 board with native USB, WiFi, BLE 5.0, 8MB flash, LiPo charging, and full Feather ecosystem compatibility — a capable wireless development platform for CircuitPython and Arduino

Open-source voltage glitching tool for hardware security research, based on Raspberry Pi Pico 2 (RP2350) with dual high-power MOSFETs, 4 selectable voltage levels, and adjustable Schmitt trigger input

ESP32-S3 three-board stack with SX1262 LoRa, CAN, RS485, RS232, Ethernet (W5500), relay, capacitive touch LCD, and DC input — a versatile industrial IoT gateway with long-range wireless.

Ultra-compact open-source Linux SBC by BeagleBoard.org, powered by the TI AM625 SoC with 512MB LPDDR4, USB-C OTG, and microSD — designed for deeply embedded projects where minimal size matters.

Miniaturised collector's Arduino UNO with ATmega328P at 16 MHz in a 34.2 × 26.7 mm form factor with USB-C, individually numbered and signed by Arduino's founders.

All-metal modular drive-by-wire 4WD robot chassis with ESP32-S3 controller, hub motors with built-in FOC control, CNC metal suspension, LIN bus communication, IP32 protection, and 12 kg payload capaci

Ultra-compact castellated ESP32-H2 development board with BLE 5.2, Zigbee 3.0, Thread 1.3, and Matter support. USB-C powered with WS2812 RGB LED, 15 GPIO pins, and 4MB flash in a tiny 23.5 x 15.2mm fo

ESP32-S3 based air quality monitor with SEN55 particulate/VOC sensor, SCD40 CO2 sensor, 1.54" e-ink display, 600mAh battery, and Grove connector.

64-core RISC-V workstation mATX motherboard with SOPHON SG2042 @ 2GHz, up to 128GB DDR4 ECC, PCIe 4.0 x16, 5x SATA, 8x USB 3.0, dual 2.5GbE for native RISC-V development.

ESP32-based triple-network MicroPython board with WiFi 802.11 b/g/n, Bluetooth LE, and LTE CAT-M1/NB1 cellular. 4MB RAM, 8MB flash, 22 GPIO, breadboard-compatible. Ideal for global LTE IoT deployments

Open-source smartwatch built on the Nordic nRF52832 SoC with 1.3-inch IPS touchscreen, heart rate sensor, accelerometer, and week-long battery life. Runs InfiniTime, Wasp-OS, or Zephyr firmware. Price

Compact ESP32-S2-WROOM module-based development board with 4MB Flash, 320KB SRAM, native USB OTG, WiFi 802.11 b/g/n, onboard LiPo charging, and BOOT/RESET buttons for USB HID and IoT prototyping.

Compact Pico-form-factor development board based on the ESP32-P4 RISC-V dual-core processor at 400MHz with 32MB PSRAM, 32MB flash, MIPI-DSI/CSI interfaces, onboard ES8311 audio codec with NS4150B ampl

Enhanced RK3328 dual-GbE router with quad-core Cortex-A53 at 1.4GHz, 1GB DDR4, 32GB eMMC onboard, dual Gigabit Ethernet, optional WiFi, and metal case — the R2S upgrade with built-in storage for relia

Flexible addressable RGB LED matrix panel with I2C control and Gravity connector, available in 8x8, 8x32, and 16x16 configurations for visual displays and lighting projects.

Texas Instruments AM62x Sitara low-power evaluation board with quad-core Cortex-A53, 1GB LPDDR4, microSD, 100Mbps Ethernet, USB-C, and 5V USB-C power — the LP variant optimized for ultra-low-power HMI

Solar-capable power management module based on CN3065 for charging an 18650 Li-ion battery via Micro USB, solar panel input (5.3V+), or BAT input, with 5V/1A USB output for powering devices up to 1A c

AI-capable development board powered by KENDRYTE K230 dual-core 64-bit RISC-V SoC running at 1.6GHz with KPU neural network accelerator, 4.1" AMOLED display, and LoRa connectivity in multiple frequenc

Raspberry Pi form factor SBC by ASUS featuring the Rockchip RK3288 SoC, 2GB LPDDR3, WiFi 802.11n+Bluetooth 4.0, Gigabit Ethernet, and 4× USB 2.0. The S model adds 16GB eMMC.

Fanless Rockchip RK3568J gateway and router board with dual 2.5GbE, 4x USB 3.0, mini-PCIe with SIM slot, M.2 NVMe, and 2GB/4GB LPDDR4 — designed for networking and industrial IoT.

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM95 LoRa radio at 868/915 MHz. Spread-spectrum LoRa modulation for multi-kilometre range, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

ESP32 board with SIM800L 2G GSM/GPRS modem for SMS alerts, voice calls, and cellular data — ideal for remote monitoring and IoT projects needing cellular fallback on a budget.