Open Hardware Directory

Five-network ESP32 MicroPython board with WiFi, Bluetooth LE, LoRa, SigFox, and dual LTE-M (CAT-M1/NB1). 4MB RAM, 8MB flash, 22 GPIO. The most connected Pycom module for versatile LPWAN IoT applicatio

Affordable single-board computer with the Amlogic S905D3 quad-core SoC, up to 4GB DDR4 RAM, Wi-Fi 5, Gigabit Ethernet, and USB-C PD power — supported by Armbian.

LILYGO T5s is an ESP32 development board with a 2.7-inch 264×176 e-paper display, onboard I2S audio (MAX98357A amplifier + ICS43434 MEMS mic), 500mA battery management, and TF card support.

4-port USB 2.0 hub for Klipper-based 3D printers with dual 24V/5V power input support. Expands a single USB host port to connect multiple peripherals like ADXL345, EBB boards, and cameras simultaneous

ESP32 development board with integrated CAN bus and RS-485 transceivers, TF card, WiFi, and BLE for industrial IoT, Modbus, and automotive OBD-II applications with 5–12V wide-range power input.

Banana Pi M4 Zero is a compact Zero-form-factor SBC powered by the Rockchip RK3528 quad-core SoC with up to 4GB DDR4, 16GB eMMC, WiFi 5, Bluetooth 5.0, and USB-C power.

Pico-sized RISC-V SBC powered by the Bouffalo Lab BL808 triple-core SoC with WiFi, BLE 5.0, and Zigbee. Features 64MB PSRAM, up to 16MB flash, microSD slot, USB-C with MIPI-CSI camera support, and 26

LILYGO T-01C3 is an ultra-compact ESP32-C3 RISC-V module with Wi-Fi and BLE 5.0, available with or without pre-soldered pins, featuring 5.33µA deep sleep current.

Ultra-low power LoRa/LoRaWAN development board based on the ASR6502 SiP (ARM Cortex-M0+ @ 48MHz + SX1262), with USB-C, solar panel support, and 3.5uA deep sleep current. Ideal for remote environmental

ESP32-S3 Feather board with 8MB flash, w.FL external antenna connector (MHF3/IPEX3), native USB-C, MAX17048 battery monitor, LiPo charging, NeoPixel, and STEMMA QT.

Popular RK3399 dual-GbE router board with 2x Cortex-A72 + 4x Cortex-A53, 4GB LPDDR4, dual Gigabit Ethernet, 2x USB 3.0, metal case option, and OpenWrt/FriendlyWrt support — the go-to affordable open-s

All-in-one AI coding board for STEM education with ESP32-S3, 2.8-inch touchscreen, 2MP camera, microphone, speaker, environmental sensors, WiFi, Bluetooth 5, and pre-loaded AI models for vision, voice

Ultra-compact ESP32-S3 development board with OV2640 camera, digital microphone, 8MB PSRAM, 8MB flash, WiFi 802.11 b/g/n, BLE 5.0, extended GPIO, and battery charging — ideal for AI and IoT edge proje

ATmega32u4 Feather board with RFM69HCW sub-GHz radio supporting 868/915 MHz with up to +20 dBm transmit power, AES-128 encryption, and 100mA LiPo charger for long-range IoT sensor networks.

Open-source smart thermostat based on Raspberry Pi Zero W with 3.5\" touchscreen, BME280 sensor, and silent solid-state relays. Fully local control with no cloud dependency, MQTT support, and Home Ass

The ODROID HC4 is a NAS-focused single-board computer from Hardkernel with the Amlogic S905X3 SoC, 4GB DDR4 RAM, and two direct-connect SATA ports for dual-drive storage. It is purpose-built for home

Compact 8-channel LoRaWAN gateway based on ESP32 and SX1303 + SX1250, with WiFi and Ethernet backhaul, 1.8-inch TFT display, and aluminum housing. Supports LoRaWAN Class A/C, TTN, and ChirpStack.

Credit-card-sized ESP32-S3 handheld computer with 56-key mechanical keyboard, 1.14" IPS display, BMI270 IMU, ES8311 audio codec, 1W speaker, MEMS microphone, IR transmitter, 1750mAh battery, Grove I2C

Full-featured ESP32-P4 development board with WiFi 6 and Bluetooth 5 LE via ESP32-C6, 100Mbps Ethernet, PoE header, 3.5mm headphone jack, USB OTG HS switchable host/device, 16MB flash, 32MB PSRAM, MIP

High-performance compact board with ATSAMD51 Cortex M4F at 120MHz, 192KB RAM, 512KB flash, 2MB SPI flash, dual 12-bit DAC/ADC, 18 PWM outputs, AES-256 crypto, and native USB. Measures 36mm × 18mm.

NEMA 17 (42mm) stepper motor closed-loop driver board with OLED display. Uses encoder feedback to eliminate missed steps and improve high-speed 3D printer and CNC motor performance.

ESP32-S3 LoRa voice kit with MAX98357A speaker, MSM261S4030HOR microphone, vibration motor, RTC, 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, and SX1262/SX1276/SX1280 radio options — designed for LoR

Ultra-compact ESP32-S3 dev board by Unexpected Maker in the TinyPICO form factor — dual-core 240 MHz LX7, 8 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 17 GPIO, LiPo charging at 35 × 17.8 mm.

Rockchip RK3576 SO-DIMM compute module with octa-core A72+A53, 6 TOPS NPU, Mali G52 GPU, up to 8GB LPDDR4X, 64GB eMMC, triple display output (HDMI 2.1 + eDP + MIPI DSI), triple camera input, dual Giga

ESP32 desktop gadget with a 1.54-inch transparent blue OLED display, IR receiver, touch control, Wi-Fi, and Bluetooth. Ships with factory firmware featuring a clock, games, and animations.