Open Hardware

Open Hardware Directory

Find Devices Flashable with Your Own Firmware.

Build your own ideas using ready-made boards — no electrical engineering degree required. Flash your firmware, customise the hardware, and make it do exactly what you want.

 

Popular searches

781devices

Adafruit PyGamer

Handheld Gaming
Adafruit PyGamer

Handheld gaming console and dev board powered by ATSAMD51J19 (120MHz Cortex-M4F) with a 1.8" TFT display, 5 NeoPixels, accelerometer, and Feather-compatible headers. Runs MakeCode Arcade, CircuitPytho

ARM Cortex-M4F @ 120MHz (ATSAMD51J19)192KB512KB + 8MB QSPIWiFi falseBLE falseZigbee falseEthernet false
~$45View

LILYGO T-Bat

Power Module
LILYGO T-Bat

Solar-capable power management module based on CN3065 for charging an 18650 Li-ion battery via Micro USB, solar panel input (5.3V+), or BAT input, with 5V/1A USB output for powering devices up to 1A c

CN3065 (Power Management IC)nonenone

Orange Pi 4 LTS

Orange Pi 4 LTS

The Orange Pi 4 LTS is a capable single-board computer based on the Rockchip RK3399 hexa-core SoC, featuring 4GB LPDDR4 RAM, 16GB eMMC, integrated Wi-Fi and Bluetooth, and Gigabit Ethernet — a solid l

Rockchip RK3399 — 2x Cortex-A72 @ 1.8GHz + 4x Cortex-A53 @ 1.4GHz4GB LPDDR416GB eMMCWiFi 802.11 b/g/n/acBLE BLE 5.0Ethernet Gigabit Ethernet
~$55View

Pycom Pytrack

IoT Sensor Board
Pycom Pytrack

GPS/GNSS tracking expansion board for Pycom modules with GLONASS/Galileo/QZSS support, 3-axis accelerometer, MicroSD slot, LiPo charger, USB serial, and 5 extra GPIO headers. Ultra-low 1µA deep sleep

N/A (expansion board — CPU provided by attached Pycom module)N/A (provided by host module)N/A (provided by host module)
~$50View

ESP32-C6-WROOM-1-N4 Module

module
ESP32-C6-WROOM-1-N4 Module

Espressif ESP32-C6 WROOM module with 4MB flash and PCB antenna, supporting Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread — for soldering onto custom IoT hardware.

ESP32-C6512KB SRAM4MBWiFi 802.11ax (Wi-Fi 6)BLE BLE 5.0Zigbee 3.0

Khadas Edge 2

Khadas Edge 2

Ultra-thin 82×57.5×5.7mm RK3588S SBC with WiFi 6, Bluetooth 5.0, USB-C DisplayPort, four independent display outputs, and a 6 TOPS NPU — the thinnest RK3588S single-board computer available.

ARM Cortex-A76 ×4 @ 2.25GHz + Cortex-A55 ×4 @ 1.8GHz8GB / 16GB LPDDR4X32GB / 64GB eMMC 5.1WiFi 802.11 a/b/g/n/ac/ax (WiFi 6), 2×2 MIMO (AP6275P)BLE Bluetooth 5.0 (AP6275P)
~$230View

Raspberry Pi Pico 2W

rp2350
Raspberry Pi Pico 2W

The Raspberry Pi Pico 2W is a wireless microcontroller board built on the RP2350 chip, delivering dual Cortex-M33 or RISC-V cores at 150MHz with 2.4GHz WiFi 4 (WPA3), Bluetooth 5.2, and 4MB flash — a

Dual ARM Cortex-M33 or dual RISC-V Hazard3 @ 150MHz (RP2350)520KB SRAM4MBWiFi 2.4GHz 802.11n (WiFi 4) WPA3BLE Bluetooth 5.2 Classic + BLE

LuckFox Pico

Linux Sbc
LuckFox Pico

Ultra-compact Linux SBC (51x21mm) based on Rockchip RV1103 with ARM Cortex-A7 @ 1.2GHz, RISC-V MCU co-processor, 0.5 TOPS NPU, ISP 3.2, 64MB DDR2, MIPI CSI camera, and 24 GPIO pins in a Pico form fact

Rockchip RV110364MB DDR2microSD (TF)24 GPIOEthernet 10/100 Mbps

CUBEEK CubeSat Educational Kit

Cubesat Kit
CUBEEK CubeSat Educational Kit

Open-source 1U CubeSat educational kit powered by Arduino Pro Mini with LoRa communication, multi-sensor payload (IMU, barometer, GPS, temperature), solar-powered EPS, and ground station dashboard for

ATmega328P @ 16MHz2KB SRAM32KBWiFi falseBLE falseZigbee falseEthernet false
~$220View

BigTreeTech PAD 7

Single Board Computer
BigTreeTech PAD 7

7-inch all-in-one 3D printer control panel with 1024x600 IPS touchscreen, pre-installed CB1 core board running Klipper, Ethernet, WiFi, 3x USB 2.0, CAN bus, and built-in speaker.

Allwinner H616 Quad-core Cortex-A53 @ 1.5GHz (CB1)1GB DDR3LNone (32GB microSD included)40-pin (via CB1) GPIOWiFiEthernet

LILYGO T-Display S3 AMOLED 1.64

ESP32 S3
LILYGO T-Display S3 AMOLED 1.64

ESP32-S3 development board with a 1.64" ICNA3311 AMOLED display at 280×456 resolution, 16MB Flash, 8MB PSRAM, Wi-Fi and Bluetooth 5 LE connectivity.

ESP32-S3R816MBWiFi 802.11 b/g/n 2.4 GHzBLE BLE 5.0
~$23View

DFRobot Beetle RP2040

DFRobot Beetle RP2040

Compact RP2040 dual-core ARM Cortex-M0+ development board with USB-C, 8 GPIO pins, and beginner-friendly immersion gold pads in a 27x20mm form factor.

ARM Cortex-M0+ dual-core @ 133MHz264KB SRAM2MB

LILYGO T-Display S3 Long

ESP32 S3
LILYGO T-Display S3 Long

ESP32-S3 development board with an elongated 3.4" capacitive touch TFT LCD (180×640 resolution), 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and optional enclosure variant.

ESP32-S3R816MBWiFi 802.11 b/g/n 2.4 GHzBLE Bluetooth 5.0 + Mesh
~$29View

Adafruit Metro RP2040

Dev Board
Adafruit Metro RP2040

Arduino-Uno-compatible development board powered by the RP2040 with 16MB QSPI flash, microSD slot, STEMMA QT, onboard NeoPixel, USB-C, and an RX/TX switch for serial flexibility.

RP2040264 KB16MB
~$15View

Waveshare DDSM315 Direct Drive Servo Motor

module
Waveshare DDSM315 Direct Drive Servo Motor

High-speed 315 RPM direct drive servo motor with RS485 bus, 12-bit encoder, and IP54 waterproof rating — ideal for RC cars, mobile robots, and DIY robotics platforms.

N/A (integrated servo controller)N/AN/A
~$60View

Raspberry Pi CM4 IO Board

Dev Board
Raspberry Pi CM4 IO Board

Official reference carrier board for the Raspberry Pi Compute Module 4. Exposes dual HDMI 2.0, Gigabit Ethernet, 2× USB 2.0, PCIe x1, dual camera/display FPC, microSD slot (for CM4 Lite), RTC, HAT hea

none (no onboard MCU; requires CM4 module)N/A (provided by CM4)N/A (provided by CM4)WiFi false (provided by CM4 module if WiFi variant)BLE false (provided by CM4 module if WiFi variant)Zigbee falseEthernet Gigabit Ethernet (RJ45, PoE-capable with HAT)
~$35View

Clearfog PRO

Linux Sbc
Clearfog PRO

Industrial-grade network computing SBC by SolidRun, powered by the Marvell Armada 388 SoC, 1GB DDR3, 4GB eMMC, dual Gigabit Ethernet + SFP, mPCIe, SATA, and 12V DC power for router and NAS application

Dual-core Cortex-A9 @ 1.6GHz (Marvell Armada 388)1GB DDR34GB eMMCEthernet Dual Gigabit + SFP
~$169View

Heltec HT-M02 Edge LoRa Gateway (V2)

Lorawan Gateway
Heltec HT-M02 Edge LoRa Gateway (V2)

IP66 waterproof edge computing LoRaWAN gateway with Rockchip RK3566 quad-core Cortex-A55 SoC, SX1303+SX1250 8-channel LoRa concentrator, 2GB DDR4, 32GB eMMC, pre-installed Debian Linux with Docker, an

ARM Cortex-A55 quad-core @ 1.8GHz, 64-bit ARMv8-A, NEON SIMD, VFPv4 FPU, Crypto Extensions, 0.8 TOPS NPU2GB DDR432GB eMMC 5.1WiFi 802.11 b/g/n (optional)Ethernet Gigabit
~$229View

LILYGO T-PoE Pro

ESP32
LILYGO T-PoE Pro

ESP32-WROVER-E development board with LAN8720 Ethernet, IEEE 802.3 af/at Power over Ethernet (5V@4A, 44–57V input), 16MB flash, 8MB PSRAM, WiFi, BLE 4.2, and expandable LCD interface for wired IoT gat

ESP32-WROVER-E520KB SRAM16MBWiFi 802.11 b/g/nBLE BLE 4.2Ethernet 10/100 Mbps PoE
~$33View

LILYGO T-Watch Ultra

Dev Board
LILYGO T-Watch Ultra

Premium ESP32-S3 smartwatch development platform with 2.06" AMOLED touchscreen, LoRa SX1262, GNSS, NFC, MAX98357A audio, DRV2605 haptic, AXP2101 PMIC, and 1100mAh battery.

Xtensa LX7 dual-core @ 240MHz, FPU, AI instructions512KB SRAM16MBWiFi 802.11 b/g/nBLE BLE 5.0
~$78View

CircuitMess ClockStar 2.0

Diy Kit
CircuitMess ClockStar 2.0

DIY smartwatch kit powered by ESP32 with ST7735S display, 6-axis IMU, Bluetooth connectivity, and programmable via CircuitBlocks visual coding environment.

Xtensa LX6 dual-core @ 240MHz, FPU520KB SRAM4MBWiFi 802.11 b/g/nBLE BLE 4.2
~$140View

LILYGO T-Lora C6

Dev Board
LILYGO T-Lora C6

LILYGO T-Lora C6 is a compact LoRa development board combining the ESP32-C6 module with SX1262 radio, supporting Wi-Fi 6, Bluetooth 5 LE, Zigbee, Thread, and sub-GHz LoRa communication.

ESP32-C6-MINI-14MBWiFi 802.11ax (WiFi 6)BLE BLE 5.0Zigbee Zigbee (IEEE 802.15.4)
~$17View

BigTreeTech K-Hub V1.0

Usb Hub
BigTreeTech K-Hub V1.0

4-port USB 2.0 hub for Klipper-based 3D printers with dual 24V/5V power input support. Expands a single USB host port to connect multiple peripherals like ADXL345, EBB boards, and cameras simultaneous

USB 2.0 Hub ControllerNoNo
~$18View

Khadas VIM3

Khadas VIM3

High-performance single-board computer with the Amlogic A311D hexa-core SoC, up to 4GB DDR4 RAM, 5 TOPS NPU for AI inference, Wi-Fi 5, and USB-C PD — supported by Armbian.

Amlogic A311D2GB / 4GB DDR416GB / 32GB eMMCWiFi 802.11 a/b/g/n/ac (Wi-Fi 5, dual-band)BLE BLE 5.0Ethernet Gigabit Ethernet
~$129View

BBC micro:bit v1

Dev Board
BBC micro:bit v1

Pocket-sized educational microcontroller with nRF51822, 5×5 LED matrix, accelerometer, magnetometer, Bluetooth LE, 2 buttons, and 19 I/O pins. Designed for teaching coding to children and beginners vi

Nordic nRF51822 ARM Cortex-M016 KB256 KBBLE Bluetooth 4.0 LE
~$15View

Get notified when new devices are added.

Jump into popular categories, use cases, and hardware traits across the directory.