Software for Your Open Hardware

Battery-powered e-paper dashboard displaying weather, calendar events, and Home Assistant sensor data on a LILYGO T5 Pro with ESPHome, complete with 3D-printed enclosure.

An ESPHome-based weather display for LILYGO T5 4.7" showing a 4-day forecast overview, 24-hour precipitation chart, temperature, humidity, and clock via Home Assistant.

ESPHome configuration template for the LILYGO T-Relay S3 that exposes all 6 onboard relays, LED status indicators, and real-time clock directly to Home Assistant with zero manual GPIO wiring.

ESPHome firmware for the LILYGO T-Higrow WiFi plant sensor that monitors soil moisture, fertilizer levels, light (lux), temperature, and humidity — with direct Home Assistant integration via a beautiful flower dashboard card.

A Home Assistant–integrated weather display for the LILYGO T-Display S3 using ESPHome, showing AccuWeather daily forecasts and Met.no hourly forecasts with button-toggled views.

ESPHome configuration that turns the LILYGO T-Internet-POE into a wired Ethernet Bluetooth Active Proxy for Home Assistant — powered and connected entirely via a single PoE cable with no WiFi required.

ESPHome package configuration for the LILYGO T-CAN485 that sets up the RS-485 UART interface for Modbus communication, enabling control of solar inverters, batteries, and industrial devices from Home Assistant.

A complete ESPHome configuration for the LILYGO T-Watch S3 that enables all onboard hardware — touchscreen, accelerometer, microphone, speaker, IR blaster, and voice assistant — through Home Assistant integration.

ESPHome configuration for the LILYGO T-ETH-Lite ESP32-S3 that integrates W5500 wired Ethernet with I2C sensor support — ideal for reliable, WiFi-free Home Assistant sensor nodes using standard Cat5 cable.

ESPHome configuration for the LILYGO T-Panel S3 dual-chip (ESP32-S3 + ESP32-H2) wall panel that drives the 4-inch 480×480 touchscreen, backlight control, and capacitive touch input for a custom Home Assistant dashboard.

A complete ESPHome YAML configuration for the LILYGO T-Dongle S3, enabling easy Home Assistant integration with the device's 0.96" color display, LED, and GPIO pins — no C++ coding required.

A custom ESPHome external component enabling the LILYGO T5 4.7-inch ESP32-S3 (V2.3 Plus) e-paper display to work with ESPHome YAML, enabling Home Assistant dashboards, weather, and sensor data rendering.

An ESPHome template for the LILYGO T-Display (ESP32 + 1.14" display) that shows Home Assistant sensor data on the screen, monitors battery state, and handles GPIO button inputs.

An ESPHome configuration for the LILYGO T-Camera S3 that enables MJPEG live streaming, snapshot server, PIR motion detection, and OLED status display — all integrated natively with Home Assistant.

ESPHome-based alternative firmware for the HeishaMon PCB, enabling YAML-configured Panasonic Aquarea heat pump control with native Home Assistant API integration and OTA updates.

ESPHome external component by dyptan-io for the Chirp / Catnip I2C soil moisture sensor on ESP32. Reads soil moisture, temperature, and light intensity with YAML-based configuration and Home Assistant integration.

Custom ESPHome component and configuration for the Louder ESP32 Rev-E board, enabling TAS5805M Class-D amplifier control as a Home Assistant media player with I2S audio output.

An elegant ESPHome-based dashboard for a 7.5\" Waveshare e-paper display connected to Home Assistant. Shows weather conditions, forecasts, and transit info with motion-triggered refreshes to extend display life. No soldering required.

Weather and task list boards for 7.5\" tricolor e-paper displays using ESPHome and Home Assistant. Features deep sleep with HA-controlled wake schedules, battery monitoring, and separate YAML configs for weather and tasks displays.

Hackaday.io project documenting the Louder ESP32 and ESP32 Audio Boards v2 series by Sonocotta, with hardware design logs, firmware guides, and community discussion.

A clean ESPHome weather forecast display for a 7.5\" Waveshare e-paper screen with Home Assistant integration. Shows weather conditions in an IKEA RODALM frame with HA-controlled refresh intervals and deep sleep support to prevent display degradation.

Official ESPHome YAML configuration for the Airlytix ES1 air quality sensor, featuring SEN55, SCD41, SHT40, DPS310, VEML6040 sensors and a custom sound level meter component with I2S microphone support.

Open-source 3D-printable enclosure for the Airlytix ES1 air quality sensor, available as STEP, STL, and FreeCAD source files. Compact 62.5 x 63 x 34 mm design with wall-mount clip.

Ready-to-use Home Assistant automation examples for the Airlytix ES1: CO2-based ventilation control, PM2.5 air purifier triggers, VOC kitchen extraction, nighttime noise alerts, and air quality notifications.

Step-by-step tutorial for setting up the Airlytix ES1 air quality sensor: WiFi configuration, Home Assistant ESPHome integration, entity reference, sensor calibration offsets, and quality threshold customization.