Software for Your Open Hardware

Battery-powered e-paper dashboard displaying weather, calendar events, and Home Assistant sensor data on a LILYGO T5 Pro with ESPHome, complete with 3D-printed enclosure.

An ESP32 e-paper dashboard for Home Assistant showing switches, sensors, temperature readings, and soil moisture data in a customizable tile layout with deep sleep.

An e-paper console combining OpenWeatherMap forecasts with Domoticz home automation sensor data on a LILYGO T5 4.7" display, with configurable device IDX mapping.

An ESPHome-based weather display for LILYGO T5 4.7" showing a 4-day forecast overview, 24-hour precipitation chart, temperature, humidity, and clock via Home Assistant.

ESPHome configuration template for the LILYGO T-Relay S3 that exposes all 6 onboard relays, LED status indicators, and real-time clock directly to Home Assistant with zero manual GPIO wiring.

Open-source LoRa APRS internet gateway firmware for the LILYGO T-Beam that bridges local LoRa tracker packets to the global APRS-IS network with bidirectional Rx/Tx support.

ESPHome firmware for the LILYGO T-Higrow WiFi plant sensor that monitors soil moisture, fertilizer levels, light (lux), temperature, and humidity — with direct Home Assistant integration via a beautiful flower dashboard card.

Full-featured plant monitoring application for the LILYGO T-Higrow with a local web UI, 24-hour charts, CSV data logging, MQTT auto-discovery for Home Assistant, and deep sleep for battery operation.

A Home Assistant–integrated weather display for the LILYGO T-Display S3 using ESPHome, showing AccuWeather daily forecasts and Met.no hourly forecasts with button-toggled views.

ESPHome configuration that turns the LILYGO T-Internet-POE into a wired Ethernet Bluetooth Active Proxy for Home Assistant — powered and connected entirely via a single PoE cable with no WiFi required.

ESPHome package configuration for the LILYGO T-CAN485 that sets up the RS-485 UART interface for Modbus communication, enabling control of solar inverters, batteries, and industrial devices from Home Assistant.

The "hedge" GUI framework transforms the LILYGO T-Watch 2020 (V1/V2/V3) into a full-featured smartwatch with watch faces, step counting, Gadgetbridge notifications, weather, navigation, and a modular app ecosystem.

A full-featured plant monitoring application for the LILYGO T-HiGrow ESP32 with live soil moisture, conductivity, light, and temperature readings, MQTT logging, and Home Assistant integration.

A complete ESPHome configuration for the LILYGO T-Watch S3 that enables all onboard hardware — touchscreen, accelerometer, microphone, speaker, IR blaster, and voice assistant — through Home Assistant integration.

ESPHome configuration for the LILYGO T-ETH-Lite ESP32-S3 that integrates W5500 wired Ethernet with I2C sensor support — ideal for reliable, WiFi-free Home Assistant sensor nodes using standard Cat5 cable.

ESPHome configuration for the LILYGO T-Panel S3 dual-chip (ESP32-S3 + ESP32-H2) wall panel that drives the 4-inch 480×480 touchscreen, backlight control, and capacitive touch input for a custom Home Assistant dashboard.

Flash the LILYGO TO-ESP8266 OLED SH1106 with Tasmota to get a WiFi-connected smart switch with a 1.3" SH1106 OLED display showing sensor values, device state, and IP address.

A complete ESPHome YAML configuration for the LILYGO T-Dongle S3, enabling easy Home Assistant integration with the device's 0.96" color display, LED, and GPIO pins — no C++ coding required.

A custom ESPHome external component enabling the LILYGO T5 4.7-inch ESP32-S3 (V2.3 Plus) e-paper display to work with ESPHome YAML, enabling Home Assistant dashboards, weather, and sensor data rendering.

An ESPHome template for the LILYGO T-Display (ESP32 + 1.14" display) that shows Home Assistant sensor data on the screen, monitors battery state, and handles GPIO button inputs.

A comprehensive motion-capture camera firmware for ESP32-S3 boards including the LILYGO T-Camera S3, recording MJPEG video to SD card, streaming to a browser, and sending Telegram/email alerts on PIR or camera-detected motion.

An ESPHome configuration for the LILYGO T-Camera S3 that enables MJPEG live streaming, snapshot server, PIR motion detection, and OLED status display — all integrated natively with Home Assistant.

Run the viral XiaoZhi AI voice chatbot on the LILYGO T-Circle S3's tiny 0.75" round display — featuring offline wake-word detection, streaming voice interaction with Qwen/DeepSeek LLMs, and MCP protocol for smart home control.

An MQTT-driven Home Assistant touchscreen panel for the LILYGO T-HMI using openHASP — define buttons, sliders, and labels via JSON and push UI updates over-the-air without recompiling firmware.

A community fork of the LILYGO T-Knob that explores using its ESP32-C6, TMC6300 motor driver, and MT6701 magnetic encoder to build a SmartKnob-style haptic rotary controller with software-defined detents and position limits.