ESP32-S3R8

ESP32-S3 development board with 1.9-inch ST7789V TFT display (170×320), optional capacitive touch, 16MB flash, 8MB PSRAM, and USB-C. Popular for smart displays and IoT dashboards.

ESP32-S3 board with 1.91-inch RM67162 AMOLED display (240×536), optional touch, 16MB flash, 8MB PSRAM, and USB-C — delivering vivid OLED visuals for IoT dashboards and smart displays.

ESP32-S3 board with a circular 2.1\" or 2.8\" ST7701S RGB display (480×480) and capacitive touch — perfect for smart home controllers, round-display clocks, and interactive dashboards.

ESP32-S3 HMI development board with a 2.8-inch resistive touchscreen, GROVE connectors, 16MB flash, 8MB PSRAM, and USB-C — designed for industrial HMI panels and interactive control interfaces.

Upgraded T-Display S3 with a larger 2.33" IPS touchscreen, ESP32-S3R8, OTG charging via SY6970, QWIIC ports, ambient light/proximity sensor, and optional camera module expansion via POGOpin.

ESP32-S3 development board with a 1.64" ICNA3311 AMOLED display at 280×456 resolution, 16MB Flash, 8MB PSRAM, Wi-Fi and Bluetooth 5 LE connectivity.

Enhanced ESP32-S3 AMOLED development board with 1.91" RM67162 display, onboard RTC, PMU, SD card slot, capacitive touch, metal shielding, and external FPC antenna.

Compact ESP32-S3 board with a 0.75" round 160×160 TFT LCD (GC9D01N), 16MB flash, 8MB PSRAM, WiFi, and BLE 5 for wearable watchface and circular display applications.

ESP32-S3 development board with SIM7080G NB-IoT/LTE-M/GNSS module, 16MB flash, 8MB PSRAM, 18650 battery support, and USB-C connectivity for low-power IoT applications.

ESP32-S3 board with SI4732-A10 AM/FM/SW/LW radio receiver, 1.9" IPS display, 900mAh battery, and rotary encoder for a portable software-defined radio experience.

ESP32-S3 development board with a unique wide bar-format display, 16MB flash, 8MB PSRAM, and USB-C for information display and custom UI projects.

Compact ESP32-S3 development board featuring a 1.47" RM67162 AMOLED display with QSPI interface, 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and battery charging support.

LILYGO T-FPGA is a development board combining an ESP32-S3 microcontroller with a Gowin GW1NSR-4C FPGA chip, enabling flexible hardware logic design alongside Wi-Fi and Bluetooth connectivity.

Advanced ESP32-S3 programmable keyboard board with 4 built-in 0.85" TFT displays, 14 RGB LEDs, rotary encoder, STM32 co-processor, magnetic connectors for daisy-chaining up to 6 units.

ESP32-S3 development board with an elongated 3.4" capacitive touch TFT LCD (180×640 resolution), 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and optional enclosure variant.

ESP32-S3 camera development board with mPCIe slot for LILYGO T-PCIE SIM cellular modules, supporting OV2640 or OV5640 cameras, 16MB flash, 8MB PSRAM, TF card, and I2S microphone for connected vision a

ESP32-S3 smart rotary encoder knob with 1.2-inch round AMOLED display, capacitive touch, buzzer, vibration motor, and dual Qwiic connectors — ideal for smart home control and media interfaces.

ESP32-S3 industrial communication board with three RS485 ports and one CAN bus — enables multi-protocol data switching for automation, sensor networks, and legacy equipment integration.

ESP32-S3 camera development board with 8MB PSRAM, 16MB Flash, onboard microphone, MAX98357A I2S amplifier, speaker output, and choice of OV2640 or OV5640 camera sensor for audio-visual IoT application

ESP32-S3 three-board stack with SX1262 LoRa, CAN, RS485, RS232, Ethernet (W5500), relay, capacitive touch LCD, and DC input — a versatile industrial IoT gateway with long-range wireless.

ESP32-S3R8 development board with a 1.1-inch JD9613 AMOLED display (126×294), onboard trackball, 16MB flash, 8MB PSRAM, WiFi, and BLE 5 — a compact touchless navigation dev kit for creative UI and int

LILYGO T4 S3 is an ESP32-S3 development board with a 2.41-inch AMOLED touchscreen (450x600), 16MB flash, 8MB PSRAM, microSD slot, Wi-Fi, and Bluetooth 5 LE.

High-end ESP32-S3 Ethernet development board with W5500 SPI Ethernet, Power-over-Ethernet support, 16MB flash, 8MB PSRAM, and modular LoRa/LTE expansion shield system.

ESP32-S3 touch-sensitive bar display board with 8MB PSRAM, 16MB Flash, Wi-Fi, and Bluetooth 5, available in LED and AMOLED display variants for building custom HMI panels, smart home controls, and int

ESP32-S3 dev board with 3.49" capacitive touch IPS display, dual microphone array, 6-axis IMU, RTC, and battery support. Ideal for wearable UIs and compact IoT dashboards.

Compact ESP32-S3 dev board by Waveshare in Arduino Nano form factor. Features dual-core 240MHz LX7, 16MB flash, 8MB PSRAM, WiFi, BLE 5.0, and USB-C. Drop-in ESP32-S3 upgrade for Nano-sized projects.

ESP32-S3 AI camera module with 2MP wide-angle night vision sensor, I2S speaker and microphone, ambient light sensor, WiFi/BLE 5.0, and edge AI inference support in a 42x42mm package.

ESP32-S3 AI smart speaker development board with dual-microphone array, ES8311 audio codec, 7 surround RGB LEDs, RTC, camera and LCD expansion interfaces, and LiPo battery support for voice assistant

ESP32-S3 development board with optional SX1262 LoRa module and 1.9-inch TFT color display. Supports Meshtastic, LoRaWAN, Arduino, MicroPython, and features integrated battery management with 18uA dee

ESP32-S3 development board with integrated camera and Wi-Fi HaLow (802.11ah) module for long-range wireless video transmission up to 1-2km at speeds up to 32 Mbps. Features USB-C, SD card slot, and Li

ESP32-S3 development board with 2.13-inch E-Paper display and optional SX1262 LoRa radio, supporting Meshtastic, LoRaWAN, Arduino, and MicroPython. Features WiFi, BLE 5.0, ultra-low 20uA deep sleep, l

ESP32-S3 development board with 2.9-inch e-ink display and optional SX1262 LoRa radio, featuring Raspberry Pi GPIO header, Meshtastic support, and 18uA deep sleep for battery-powered IoT and mesh netw

5-inch 800x480 IPS WiFi touchscreen for Bambu Lab X1, P1, and A1 series 3D printers. ESP32-S3 based, 16MB flash, 8MB PSRAM, built-in battery for portable use, supports up to 4 printers simultaneously.

5-inch 800x480 IPS WiFi touchscreen controller for Klipper printers. ESP32-S3 based, 16MB flash, 8MB PSRAM, built-in battery for 30 minutes portable use, supports up to 50 Klipper printers.