Open Hardware Directory

A pocket-sized ESP32-S3 development board with a 4.7-inch capacitive touchscreen e-paper display (960×540, 16 grayscale), anti-glare glass, warm-toned backlight, MagSafe wireless charging, and compreh

16-bit 4-channel analog-to-digital converter module with programmable gain amplifier (PGA, up to 16x). I2C interface, 860 SPS max. Ideal for precision analog measurements.

ESP32-S3 based data logging board with DS3231 RTC, microSD card slot, dual STEMMA/Qwiic connectors, and LiPo charging. Achieves ~21µA deep sleep current. Open source hardware with Arduino and CircuitP

LILYGO T-2CAN is an ESP32-S3 development board featuring dual CAN bus interfaces via two TWAI controllers, Wi-Fi, Bluetooth 5 LE, and wide DC input range for automotive and industrial applications.

Tiny dual-core ESP32-S3 dev board in the QT Py / Seeed XIAO footprint — 8 MB flash, WiFi, BLE 5, native USB-C, STEMMA QT, 13 GPIO, 10 ADC inputs, no PSRAM variant.

Triple RK3588 multi-display SBC with 6 HDMI outputs for video walls and digital signage, running Armbian Linux.

nRF52840 + SX1262 LoRa + L76K GPS all-in-one board with 1.54-inch e-paper display, 850mAh battery, Thread, Zigbee, and BLE 5.0 — runs Meshtastic, SoftRF, and custom NRF firmware out of the box.

ESP32-P4 high-performance board with ESP32-C6 WiFi HaLow (802.11ah), 16MB flash, 8MB PSRAM, H.264 1080P video processing, MIPI-CSI/DSI, and BLE 5 — designed for long-range sub-GHz WiFi IoT application

Libre Computer Le Potato — Amlogic S905X SBC with 2GB DDR4, 4K HDMI output, and Raspberry Pi-compatible 85.6×56.5mm form factor, supported by mainline Linux, Armbian, and Raspbian-compatible images.

Advanced ESP32-S3 programmable keyboard board with 4 built-in 0.85" TFT displays, 14 RGB LEDs, rotary encoder, STM32 co-processor, magnetic connectors for daisy-chaining up to 6 units.

Compact ATmega328P-based Arduino-compatible board at 16 MHz, 5V, with 28KB flash, 18 GPIO, Micro USB, FTDI header, and mounting holes — a miniaturized UNO with battery-friendly power management.

Arduino's flagship UNO board upgraded with Renesas RA4M1 ARM Cortex-M4F at 48MHz, ESP32-S3 WiFi/BLE 5.0, built-in 12×8 LED matrix, 12-bit DAC, CAN bus, op-amp, and Qwiic connector — all in the classic

Official Espressif development board for the ESP32-C6, combining WiFi 6, BLE 5, and IEEE 802.15.4 (Thread/Zigbee/Matter) on a RISC-V single-core SoC — ideal for Matter-native IoT and smart home develo

ESP32 + SX1276 LoRa multi-protocol bridge in an aluminum enclosure, converting between WiFi, Bluetooth, and LoRa with 8MB flash and 8MB PSRAM.

Ultra-low-power LoRa/LoRaWAN development node based on the ASR6502 SoC (ARM Cortex-M0+ @ 48MHz + SX1262), with a built-in 1/2AA battery holder, 3.5uA deep sleep, and Arduino compatibility. Ideal for r

Eddy current inductive bed leveling probe for Klipper 3D printers. Offers 0.5μm precision, rapid bed mesh scanning, temperature compensation (USB), and works as Z-endstop. Mounts on standard Voron X c

RP2040 Feather board with 8 consecutive 5V-level-shifted PIO outputs dedicated to NeoPixel LED strip control, 8MB flash, USB-C, and LiPo charging.

The Raspberry Pi 1 Model B is the original production Raspberry Pi single-board computer, featuring a Broadcom BCM2835 ARM1176JZF-S at 700MHz, 512MB RAM, 100Mbps Ethernet, 2 USB 2.0 ports, HDMI, 26-pi

Open-source Raspberry Pi audio HAT featuring TAS5825M Class-D amplifier with integrated DSP, delivering 32W per channel at 8 ohms. Includes 15-band parametric EQ, FIR filtering, DRC, IR input, and onb

20-key open-source mechanical macropad with duckyScript engine, ESP32-S3, 1.5\" OLED, Bluetooth 5.0, hot-swap switches, dual rotary encoders, and microSD — a powerful Stream Deck alternative.

Banana Pi M2 Pro is a compact SBC powered by the Amlogic S905X3 with 2GB DDR4, 16GB eMMC, WiFi 5, Bluetooth 5.0, three USB 3.0 ports, and USB-C power input.

ESP32-based triple-network MicroPython board with WiFi 802.11 b/g/n, Bluetooth LE, and LTE CAT-M1/NB1 cellular. 4MB RAM, 8MB flash, 22 GPIO, breadboard-compatible. Ideal for global LTE IoT deployments

LILYGO T-Beam 1W is an ESP32-S3 LoRa development board featuring a 1-watt LoRa power amplifier for significantly extended transmission range, with GPS support, AXP2101 PMU, and 18650 battery compatibi

Libre Computer La Frite — ultra-compact Amlogic S805X SBC with 512MB/1GB DDR4, 8GB eMMC, and 5V micro-USB power in a credit-card form factor for lightweight Linux and IoT applications.

Linux SBC based on Rockchip RV1106G2 with ARM Cortex-A7 @ 1.2GHz, 0.5 TOPS NPU, 128MB DDR3L, 256MB SPI NAND Flash, 100M Ethernet (RJ45), MIPI CSI camera, 26 GPIO pins, and RTC battery header in Pico f