Open Hardware Directory

ESP32 LoRa development board with a Temperature Compensated Crystal Oscillator (TCXO) for enhanced LoRa frequency stability, 0.96-inch SSD1306 OLED display, 4MB Flash, WiFi, BLE 4.2, TF card slot, and

Breadboard-friendly open-source ESP32-C6 dev board with WiFi 6, Thread, Zigbee, BLE 5, built-in LiPo charger, and dual USB-C — all for under €9.

Industrial-grade Linux SoM with NXP i.MX 8M Mini quad-core Cortex-A53 at 1.8GHz + STM32H747 dual-core Cortex-M7/M4, 2GB RAM, WiFi/BLE, NXP SE050 hardware security, Docker containers, and OTA updates f

Li-Ion/LiPo battery charging module based on the TP4056 IC with built-in battery protection circuit. Mini USB 5V input, 1A charging current. Essential for portable and battery-powered IoT projects.

Pico-compatible development board with RP2350A MCU, onboard CAN V2.0B bus interface (XL2515 controller + SIT65HVD230DR transceiver), 4MB flash, 26 GPIO pins, castellated module design, and USB-C conne

LILYGO T5s is an ESP32 development board with a 2.7-inch 264×176 e-paper display, onboard I2S audio (MAX98357A amplifier + ICS43434 MEMS mic), 500mA battery management, and TF card support.

Affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, integrated 18650 battery holder, WiFi, and BLE 5.0 for battery-powered IoT sensor nodes under $10.

Mini-ITX RISC-V board with quad-core SiFive P550 @ 1.8GHz (ESWIN EIC7700X), up to 32GB LPDDR5, 19.95 TOPS NPU, 8K video codec, PCIe x8 slot, SATA3.

Nordic nRF24L01+ 2.4GHz wireless transceiver module with SPI interface, 2Mbps data rate, 126 channels, and up to 100m range. Popular choice for Arduino and Raspberry Pi wireless sensor networks.

Open-source ESP32-based ventilation controller for Ducobox Silent/Focus and Orcon MVS-15xx systems with optional CO2, humidity, VOC, and NOx sensors, fully compatible with ESPHome and Home Assistant.

RK3588S SBC with 4x Cortex-A76 + 4x Cortex-A53 at 2.4GHz, up to 32GB LPDDR5, M.2 NVMe, Gigabit Ethernet, HDMI 2.1 (8K), dual MIPI-DSI/CSI, 6 TOPS NPU, and USB-C PD — FriendlyElec's compact RK3588S des

Libre Computer La Frite — ultra-compact Amlogic S805X SBC with 512MB/1GB DDR4, 8GB eMMC, and 5V micro-USB power in a credit-card form factor for lightweight Linux and IoT applications.

Texas Instruments SK-AM64B Starter Kit — dual Cortex-A53 + quad Cortex-R5F industrial evaluation board for automation, motor control, and time-sensitive networking.

Espressif audio and multimedia development board with ESP32-S3, dual-microphone array for far-field wake-word detection, camera support, LCD interface, microSD, and Wi-Fi + BLE.

ESP32-S3-BOX-3 bundle kit including the AIoT dev board with 2.4" touchscreen, dual mics, speaker, plus the DOCK stand, RGB LED module, USB-C cable, and Dupont wires.

Compact ESP32-S3 + SX1262 LoRa development board with 0.96" OLED display, USB-C, and built-in LiPo charging. One of the primary boards for Meshtastic and LoRaWAN IoT projects.

FriendlyElec NanoPi K2 — Amlogic S905 SBC with 2GB DDR3, WiFi 802.11n, Bluetooth 4.0, 4× USB 2.0, Gigabit Ethernet, and HDMI for media and IoT Linux projects.

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM69HCW sub-GHz radio at 868/915 MHz. Up to +20 dBm TX power, AES-128 encryption, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

ESP32-based dual-relay WiFi/BLE smart switch with per-channel power monitoring via ADE7953, cover/shutter control mode, and 10A per channel. Flashable with Tasmota for local roller blind and dual ligh

Compact 8-channel LoRaWAN gateway based on ESP32 and SX1303 + SX1250, with WiFi and Ethernet backhaul, 1.8-inch TFT display, and aluminum housing. Supports LoRaWAN Class A/C, TTN, and ChirpStack.

Feather-form-factor board with Raspberry Pi RP2040 dual-core Cortex-M0+ @ 133MHz, 264KB SRAM, 8MB Flash, 21 GPIO, 4 ADC, 2 PIO peripherals, USB-C with UF2 bootloader, STEMMA QT, and LiPo charging. Run

Tiny Linux SBC (28x21mm) based on Rockchip RV1103 with ARM Cortex-A7 @ 1.2GHz, RISC-V MCU, 0.5 TOPS NPU, 64MB DDR2, MIPI CSI camera, 17 GPIO pins, and castellated-hole design for direct soldering.

WiFi smart switch based on ESP8285, widely used in the open-source home automation community. Easily flashable with Tasmota or ESPHome for local-only smart home control without cloud dependency.

LILYGO T5 E-Paper S3 Pro is an ESP32-S3 board with a 4.7-inch 16-greyscale e-paper display, SX1262 LoRa, touch input, RTC, BQ25896/BQ27220 battery management, 16MB flash, 8MB PSRAM, and optional GPS.

Pocket-sized x86 single board computer with Intel Celeron N5105 quad-core, 8GB LPDDR4 RAM, 64GB eMMC, Wi-Fi 6, 2.5GbE, triple display output, and an integrated Arduino Leonardo co-processor.