WS2812B Addressable LED

Advanced ESP32-S3 programmable keyboard board with 4 built-in 0.85" TFT displays, 14 RGB LEDs, rotary encoder, STM32 co-processor, magnetic connectors for daisy-chaining up to 6 units.

ESP32 development board with LAN8720 Ethernet, 16MB flash, 8MB PSRAM, WS2812 RGB LED, SIM/TF card slots, and T-PCIE expansion support for industrial IoT, wired networking, and CAN bus applications.

Compact ESP32-PICO-V3-02 board with rotary encoder, WS2812 RGB LED ring, Wi-Fi, BLE 4.2, 8MB flash, and 2MB PSRAM. Ideal for knob-based UI controllers and volume/parameter controls.

Open-source flight controller board with RP2350B MCU, 10-DOF sensor suite (gyro, accelerometer, barometer, magnetometer), INA226 battery monitor, microSD with 4-bit SDIO, and DC-DC converter. 50.7x41.

Ultra-compact ESP32-C6 dev board by M5Stack with WiFi 6, BLE 5.0, Zigbee 3.0, and Thread/Matter support. RISC-V single-core at 160MHz, USB-C, RGB LED, and button in a tiny form factor.

Ultra-compact ESP32-S3 dev board (24x24mm) by M5Stack without display. Features WiFi, BLE 5.0, 8MB flash, Grove port, RGB LED, button, and USB-C in a tiny enclosure for IoT and embedded projects.

Open-source ESP32-S3 camera board with PoE, microSD, and Stemma QT designed for AI-powered utility meter reading using the AI-on-the-edge-device firmware with TensorFlow Lite inference.

20-key open-source mechanical macropad with duckyScript engine, ESP32-S3, 1.5\" OLED, Bluetooth 5.0, hot-swap switches, dual rotary encoders, and microSD — a powerful Stream Deck alternative.

Open-source 60% mechanical keyboard PCB with RP2040 MCU, per-key RGB NeoPixel LEDs, Kailh hot-swap sockets, onboard buzzer, and USB-C. Runs KMK and CircuitPython firmware.

Ultra-compact RP2040 microcontroller board in a tiny form factor. Features dual-core Cortex-M0+ at 133 MHz, USB-C, onboard WS2812 RGB LED, and castellated pads. Raspberry Pi Pico compatible.

12-LED addressable WS2812B RGB ring in a 50mm form factor, running on 5V with single-wire data control — perfect for status indicators, wearables, and visual effects.

ESP32-S3 based multi-mode BLE detection and security research tool with integrated piezo buzzer, MMCX antenna connector, and seven swappable firmware modes for surveillance detection, drone tracking,

ESP32 audio development board with TAS5805M I2S Class-D amplifier delivering 2x23W stereo output, designed for multi-room audio, network streaming, and smart home integration.

Compact, low-power ARM Cortex-M0+ development board with ATSAMD21G18 MCU, 16MB SPI flash, USB-C, WS2812 RGB LED, and FPC display connector, ideal for IoT and low-power applications.

Compact ESP32-E IoT microcontroller with WiFi 802.11 b/g/n, Bluetooth 4.2, 18 digital I/O, 11 analog inputs, 7 touch pins, 2 DACs, onboard WS2812 RGB LED, GDI display interface, and lithium battery ch

Ultra-compact USB-A plug-and-play development board with the Raspberry Pi RP2350A dual-architecture MCU, 4MB flash, WS2812 RGB LED, castellated module design, and 29 GPIO pins in a tiny 18 x 25.5mm fo

Ultra-compact castellated ESP32-H2 development board with BLE 5.2, Zigbee 3.0, Thread 1.3, and Matter support. USB-C powered with WS2812 RGB LED, 15 GPIO pins, and 4MB flash in a tiny 23.5 x 15.2mm fo

Industrial DIN-rail RP2350B controller with 8-channel relay outputs (10A/250VAC), 8 optocoupler-isolated digital inputs, W5500 Ethernet (optional PoE), isolated RS485, RTC, microSD, and 7-36V wide-vol

ESP32-S3 AI smart speaker development board with dual-microphone array, ES8311 audio codec, 7 surround RGB LEDs, RTC, camera and LCD expansion interfaces, and LiPo battery support for voice assistant

Industrial ESP32-S3 controller with 8-channel optocoupler-isolated digital inputs (5-36V), 8-channel Darlington outputs (500mA each), PoE Ethernet (W5500), isolated RS-485 and CAN bus, RTC, and DIN ra

Compact RP2350A development board with an 8x8 WS2812 addressable RGB LED matrix, QMI8658 6-axis IMU (accelerometer + gyroscope), 16MB flash, 25 GPIO pins, HSTX interface, and USB-C for interactive LED

Ultra-compact ESP32-H2 dev module with Thread 1.4, Zigbee 3.0, Matter, and BLE 5 — featuring a Grove port, IR transmitter, and RGB LED in a stamp-sized 23.5×12mm form factor.

Official Espressif development board for the ESP32-C6, combining WiFi 6, BLE 5, and IEEE 802.15.4 (Thread/Zigbee/Matter) on a RISC-V single-core SoC — ideal for Matter-native IoT and smart home develo

Arduino Pro Micro-compatible RP2040 keyboard controller with 8 MB flash, 20 GPIO, STEMMA QT, castellated USB pads, NeoPixel, and QMK/KMK/CircuitPython support for custom mechanical keyboards.

Tiny RP2040-based dev board in the QT Py / Seeed XIAO form factor, featuring 8MB flash, USB-C, a NeoPixel, and a STEMMA QT connector for solderless I2C sensor wiring.

Round, sewable Arduino-compatible wearable platform with ATmega32u4, native USB, NeoPixel, JST battery connector, and alligator-clip-friendly pads in a 45mm diameter form factor.

RP2040-powered 3×4 mechanical macropad with 12 NeoPixels, a 128×64 OLED display, rotary encoder, speaker, and STEMMA QT — fully programmable via CircuitPython or Arduino.