Software for Your Open Hardware

A standalone Reticulum mesh node with encrypted LXMF messaging for the T-Deck Plus — end-to-end encrypted off-grid communication with touchscreen UI, web flasher, and no companion phone needed.

Modernized fork of the ADX transceiver by VK2DIY featuring single USB-C interface, KiCad design files, integrated SWR/power metering, SMT components, PlatformIO firmware, and expanded band support from 2200m to 70cm.

Flash the LILYGO T-Deck with MeshCore firmware to create a fast, professional LoRa mesh communicator with offline maps, repeater management, signal diagnostics, and a terminal CLI — all accessible via the physical QWERTY keyboard.

Connect BioAmp EXG Pill and Brain BioAmp Band to BrainBay open-source biosignal processing software for real-time EEG and EMG visualization on Windows.

Standalone FT8 QRP transceiver with built-in touchscreen GUI on STM32F746, eliminating the need for a PC. Operates on 5-7 HF bands from USB power bank at QRPp levels or up to 5W with external 12V supply.

A custom aviation safety device combining a LILYGO T-Beam running SoftRF with an ADS-B receiver and AMOLED display for real-time collision awareness for gliders and small aircraft.

Modified HeishaMon firmware optimized for cascade operation of multiple Panasonic Aquarea heat pumps, coordinating load balancing and staging across units for maximum efficiency.

Build a brain-computer interface that reads EEG beta waves to illuminate LEDs on the Arduino Uno R4 LED matrix when you concentrate, using BioAmp EXG Pill and Brain BioAmp Band.

An offensive security and red-team firmware for the LILYGO T-Embed CC1101, providing sub-GHz RF scanning, signal replay, WiFi attacks, BLE exploitation, NFC cloning, IR control, and BadUSB — with 5.1k GitHub stars.

In-depth performance review of the ThinkNode M1 covering standardized urban range testing (1.71km achieved), battery optimization (4-5 days with GPS off), firmware updates to InkUI, and antenna considerations for maximizing Meshtastic mesh network coverage.

Complete firmware suite for Evil Crow RF V2 with BLE-based mobile app control via Flutter, 33+ protocol brute-force with De Bruijn sequences, nRF24 attack capabilities, and Python spectrum analysis utilities.

Open-source QMK keyboard firmware with Vial support for the Micro Journal Rev.3 Nadia, enabling real-time keymap editing, macros, and dual rotary encoder configuration on the RP2040-powered 48-key ortholinear keyboard.

ESPHome package configuration for the LILYGO T-CAN485 that sets up the RS-485 UART interface for Modbus communication, enabling control of solar inverters, batteries, and industrial devices from Home Assistant.

Build a WiFi environmental monitoring station with BME280 sensor measuring temperature, humidity, and barometric pressure. Uses I2C on any ESP8266/ESP32 with Tasmota. Under $6 total cost.

A bike computer for the LILYGO T-RGB round display integrating BLE speed/cadence/heart rate sensors, Forumslader V5 dynamo hub charging, and Komoot turn-by-turn navigation on a circular gauge.

A SquareLine Studio–designed LVGL smart watch demo ported to the LILYGO T-Encoder Pro's AMOLED display, using a lean custom SH8601 display driver and CHSC5816 touch driver — a ready-to-extend firmware template.

Rust firmware for Makerfabs ESP32 DW3000 that creates a UWB mesh network of LED controllers with automatic discovery, decimeter-level ranging, and coordinated lighting effects.

A real-time stock market display for the LILYGO T-Dongle S3's 0.96" screen, showing S&P 500, NASDAQ 100, and 10-year T-Bill values and daily percentage changes pulled from Yahoo Finance over WiFi.

Automate roller blinds with Tasmota using a Sonoff Dual R3 or Shelly Plus 2PM. Supports AC/DC motors and stepper motors with position tracking, MQTT control, and Home Assistant cover integration.

Send sensor readings to an MQTT broker over WiFi with automatic SD card backup when the network is unavailable. Combines real-time IoT connectivity with reliable local storage for remote deployments.

Security-focused firmware for the T-Watch 2020 providing WiFi deauthentication detection, BLE device fingerprinting, and TV-B-Gone IR blaster — a penetration testing tool on your wrist.

A phone-inspired LVGL UI firmware for the LILYGO T-Deck Pro that turns the e-paper + LTE handheld into a functional phone interface with cellular modem support, GPS, touch, audio, and a web-based UI built with PlatformIO.

A wearable LoRaWAN range testing system using the LILYGO T-Watch S3, pairing the watch's SX1262 radio with GPS from a BLE-connected smartphone to map network coverage and signal quality in real time.

Plugin manager that bridges existing smart home ecosystems (Zigbee2MQTT, Shelly, Home Assistant) into Matter — pair once, all devices appear in Apple Home, Google Home, Alexa, and more.

Community-designed 3D printable cases for the Elecrow ThinkNode M1 Meshtastic transceiver. Multiple designs available on MakerWorld featuring heat-set inserts, optimized screw holes, and ergonomic form factors for outdoor use.