5V via USB-C

13 devices

Heltec Vision Master T190

Dev Board

ESP32-S3 development board with optional SX1262 LoRa module and 1.9-inch TFT color display. Supports Meshtastic, LoRaWAN, Arduino, MicroPython, and features integrated battery management with 18uA dee

Xtensa LX7 dual-core @ 240MHz, FPU, ULP co-processor512KB SRAM16MB (QSPI)WiFi 802.11 b/g/nBLE BLE 5.0

meshtastic Lora Mesh Networking Lorawan Node Iot Sensor Node

~$18View

Heltec MeshPocket

Power Bank

Qi2 magnetic wireless charging power bank with integrated Meshtastic mesh networking node, featuring nRF52840 BLE + SX1262 LoRa radio and a 2.13" e-ink display. Available in 5000mAh and 10000mAh confi

ARM Cortex-M4F @ 64MHz, FPU, DSP, HW crypto (CryptoCell-310)256KB SRAM1MBBLE Bluetooth 5.0

Lora Mesh Networking Off Grid Communication Emergency Communication Wireless Power Bank

~$59View

Heltec CubeCell AB01 Dev-Board (V2)

Dev Board

Ultra-low power LoRa/LoRaWAN development board based on the ASR6502 SiP (ARM Cortex-M0+ @ 48MHz + SX1262), with USB-C, solar panel support, and 3.5uA deep sleep current. Ideal for remote environmental

ARM Cortex-M0single-core @ 48MHz16KB SRAM128KB

Lorawan Node Lora Iot Remote Environmental Sensing Solar Powered Iot

~$14View

Heltec ESP32-C3 Arduino Development Board

Dev Board

Ultra-compact RISC-V development board with ESP32-C3FN4, WiFi, BLE 5.0, integrated battery management, and USB-C — ideal for low-power IoT sensor nodes and wireless prototyping.

RISC-V 32-bit single-core @ 160MHz, hardware crypto (AES/SHA/RSA/ECC)400KB SRAM4MB (SiP)WiFi 802.11 b/g/nBLE BLE 5.0

iot Smart Home Home Automation Environmental Monitoring

~$5View

Heltec WiFi Kit 32 (V3)

Dev Board

ESP32-S3-based IoT development board with built-in 0.96" OLED display, lithium battery management, WiFi and Bluetooth 5.0 connectivity, and USB-C interface in a compact 50mm form factor.

Xtensa LX7 dual-core @ 240MHz, FPU, hardware crypto (AES/SHA)512KB SRAM8MB (SiP)WiFi 802.11 b/g/nBLE Bluetooth 5.0, BLE, Mesh

Weather Station Weather Display Environmental Monitoring Oled Status Display

~$13View

Heltec HT-DE01 Multi Size E-Ink Drive Board

A compact universal e-ink driver board based on ESP32-S3FN8 with WiFi and Bluetooth connectivity, 24-pin FFC interface compatible with most e-ink displays, USB-C and LiPo battery support, and Arduino

Xtensa LX7 dual-core @ 240MHz, FPU, vector instructions512KB SRAM8MB (QSPI)WiFi 802.11 b/g/nBLE BLE 5.0, Bluetooth Mesh

E Ink Development Electronic Shelf Labels Digital Signage Smart Display

~$10View

Heltec Wireless Tracker V2

ESP32-S3 development board with SX1262 LoRa (28dBm), UC6580 dual-frequency GNSS, 0.96" TFT display, solar charging, and Meshtastic/MeshCore support for GPS tracking and mesh networking.

Xtensa LX7 dual-core @ 240MHz, FPU, AI vector extensions, HW crypto (AES/SHA/RSA)512KB SRAM8MB (Quad SPI)WiFi 802.11 b/g/nBLE BLE 5.0

Asset Tracking Lora Mesh Networking Meshtastic Mesh Gps Tracking

~$27View

Heltec Wireless Tracker

ESP32-S3 development board with integrated SX1262 LoRa transceiver, UC6580 dual-frequency GNSS receiver, and 0.96-inch TFT display for IoT asset tracking, Meshtastic mesh networking, and LoRaWAN appli

Xtensa LX7 dual-core @ 240MHz, FPU, hardware crypto (AES/SHA)512KB SRAM8MBWiFi 802.11 b/g/nBLE BLE 5.0

Asset Tracking Gps Tracking Meshtastic Mesh Lora Mesh Networking

~$23View

Heltec Wireless Stick V3

Compact ESP32-S3 development board with integrated SX1262 LoRa transceiver and 0.49-inch OLED display. Supports Meshtastic, LoRaWAN, WiFi, and BLE 5.0 in a breadboard-friendly form factor with battery

Xtensa LX7 dual-core @ 240MHz, FPU, HW crypto (AES/SHA/RSA)512KB SRAM8MBWiFi 802.11 b/g/nBLE BLE 5.0

Lora Mesh Networking Off Grid Communication Lorawan Sensor Node Environmental Monitoring

~$18View

Heltec Vision Master E213

ESP32-S3 development board with 2.13-inch E-Paper display and optional SX1262 LoRa radio, supporting Meshtastic, LoRaWAN, Arduino, and MicroPython. Features WiFi, BLE 5.0, ultra-low 20uA deep sleep, l

Xtensa LX7 dual-core @ 240MHz, FPU, AI vector extensions, HW crypto (AES/SHA/RSA)512KB SRAM16MBWiFi 802.11 b/g/nBLE BLE 5.0

Lora Mesh Networking Electronic Label Lorawan Node Remote Sensor Nodes

View

Heltec Vision Master E290

ESP32-S3 development board with 2.9-inch e-ink display and optional SX1262 LoRa radio, featuring Raspberry Pi GPIO header, Meshtastic support, and 18uA deep sleep for battery-powered IoT and mesh netw

Xtensa LX7 dual-core @ 240MHz, FPU, vector instructions, AESSHA hardware crypto512KB SRAM16KB RTC SRAM16MB (QSPI, W25Q128)WiFi 802.11 b/g/nBLE BLE 5.0

Lora Mesh Networking Off Grid Communication Meshtastic Mesh Electronic Shelf Labels

~$20View

Heltec Wireless Paper

ESP32-S3 + SX1262 LoRa E-Ink development board with 2.13" e-paper display, WiFi, BLE 5.0, and LoRa connectivity. Designed for electronic shelf labels, Meshtastic mesh nodes, and low-power IoT sensor d

Xtensa LX7 dual-core @ 240MHz, FPU, vector instructions512KB SRAM8MB (integrated)WiFi 802.11 b/g/nBLE BLE 5.0

Meshtastic Mesh Electronic Shelf Labels Environmental Monitoring Asset Tracking

~$16View

Heltec Mesh Node T114

Compact nRF52840 + SX1262 LoRa development board with BLE 5.0, optional 1.14" TFT display and L76K GPS module. Designed for Meshtastic mesh networking, LoRaWAN, and battery-powered IoT deployments wit

ARM Cortex-M4F @ 64MHz, FPU, DSP, HW crypto (CryptoCell-310)256KB SRAM1MB internal2MB external QSPIBLE BLE 5.0, Bluetooth Mesh

Meshtastic Mesh Lora Mesh Networking Gps Tracking Lorawan Node

~$18View

Get notified when new devices are added.

More to explore — popular traits shared by devices with Power: 5V via USB-C.

Asset Tracking Environmental Monitoring Off-Grid Communication GPS Tracking LoRa Mesh Networking Meshtastic Mesh Electronic Shelf Labels LoRaWAN Node ARM Cortex-M4F @ 64MHz (nRF52840)Development Board WiFi 4 (802.11 b/g/n)BLE 5.0 256KB SRAM 8MB Flash Xtensa LX7 dual-core @ 240MHz, FPU, vector instructions Bluetooth 5.0 512KB SRAM Xtensa LX7 dual-core @ 240MHz, FPU, hardware crypto (AES/SHA)ESP32-S3 (Xtensa LX7 Dual-Core 240MHz)