SX1262 (433/868/915MHz)

Open-source ESP32-S3 smartwatch with LoRa, 1.3" 240×240 IPS touchscreen, haptic feedback, accelerometer, speaker, microphone, IR transmitter, and 1500mAh battery. Supports Meshtastic, ESPHome, Arduino

nRF52840 + SX1262 LoRa + L76K GPS all-in-one board with 1.54-inch e-paper display, 850mAh battery, Thread, Zigbee, and BLE 5.0 — runs Meshtastic, SoftRF, and custom NRF firmware out of the box.

ESP32-S3 LoRa development board with 0.96" OLED display, multiple LoRa module options (SX1262/SX1276/SX1280/LR1121), WiFi, BLE, and 18650 battery support for Meshtastic and IoT applications.

Simplified T-Echo with nRF52840, SX1262 LoRa, and optional L76K GPS — a low-cost, low-power LoRa node and Meshtastic-compatible board for off-grid mesh networking.

LILYGO T5 E-Paper S3 Pro is an ESP32-S3 board with a 4.7-inch 16-greyscale e-paper display, SX1262 LoRa, touch input, RTC, BQ25896/BQ27220 battery management, 16MB flash, 8MB PSRAM, and optional GPS.

Compact ESP32-S3 + SX1262 LoRa development board with 0.96" OLED display, USB-C, and built-in LiPo charging. One of the primary boards for Meshtastic and LoRaWAN IoT projects.

Upgraded ESP32-S3R2 + SX1262 LoRa dev board with 2MB PSRAM, 16MB flash, 0.96" OLED, switchable FPC/IPEX 2.4G antenna, GNSS interface, and solar input. Meshtastic and LoRaWAN ready.

ESP32-S3 development board with optional SX1262 LoRa module and 1.9-inch TFT color display. Supports Meshtastic, LoRaWAN, Arduino, MicroPython, and features integrated battery management with 18uA dee

Compact ESP32-S3 + SX1262 LoRa development board with WiFi, BLE 5.0, and integrated battery management. Meshtastic and LoRaWAN compatible, with a slim stick form factor ideal for IoT sensor nodes and

Ultra-low power LoRa/LoRaWAN development board based on the ASR6502 SiP (ARM Cortex-M0+ @ 48MHz + SX1262), with USB-C, solar panel support, and 3.5uA deep sleep current. Ideal for remote environmental

Ultra-low-power LoRa/LoRaWAN development node based on the ASR6502 SoC (ARM Cortex-M0+ @ 48MHz + SX1262), with a built-in 1/2AA battery holder, 3.5uA deep sleep, and Arduino compatibility. Ideal for r

LoRa + GPS development board based on ASR6502 SiP (ARM Cortex-M0+ with SX1262), featuring integrated AIR530Z GPS/BeiDou module, 0.96" OLED display, solar charging, and ultra-low 21uA deep sleep curren

Industrial RS-485 wireless converter with ESP32, LoRa SX1262, Ethernet, and ESPHome support. Converts RS-485/Modbus serial data to LoRa, LoRaWAN, LTE, or Ethernet for long-range industrial IoT communi

Ultra-compact ESP32-C3 + SX1262 LoRa/LoRaWAN module with WiFi and BLE, designed for SMT integration into IoT devices. Features 10uA deep sleep, +21dBm TX power, and Meshtastic compatibility in a tiny

Ultra-compact 18x18mm LoRa/LoRaWAN module based on the ASR6502 SiP with integrated ARM Cortex-M0+ MCU and Semtech SX1262 transceiver. Features 3.5uA deep sleep, Arduino compatibility, and CE/FCC certi

ESP32-S3 development board with 2.13-inch E-Paper display and optional SX1262 LoRa radio, supporting Meshtastic, LoRaWAN, Arduino, and MicroPython. Features WiFi, BLE 5.0, ultra-low 20uA deep sleep, l

ESP32-S3 development board with 2.9-inch e-ink display and optional SX1262 LoRa radio, featuring Raspberry Pi GPIO header, Meshtastic support, and 18uA deep sleep for battery-powered IoT and mesh netw

Compact nRF52840 + SX1262 LoRa development board with BLE 5.0, optional 1.14" TFT display and L76K GPS module. Designed for Meshtastic mesh networking, LoRaWAN, and battery-powered IoT deployments wit

Heltec CubeCell HTCC-AB02 is an ultra-low-power LoRa/LoRaWAN development board based on the ASR6502 SoC (ARM Cortex-M0+ with integrated SX1262), featuring a 0.96" OLED display, solar panel input, and