Raspberry Pi RP2040

Dual-MCU board combining RP2040 and ESP32-C3, with a 1.14-inch ST7789V display, WiFi, BLE 5.0, and Arduino/MicroPython support — bringing Raspberry Pi Pico connectivity to wireless IoT projects.

OSHWA-certified open-source ultrasound development kit built around the Raspberry Pi Pico (RP2040). Features a 60 Msps 10-bit ADC, AD8331 time-gain amplifier, and three-level bipolar pulser for NDT an

Dual-MCU IoT development platform featuring ESP32-S3 and RP2040 processors with a 4-inch capacitive touchscreen, WiFi, BLE, optional LoRa, and multiple Grove sensor connectors for IoT prototyping.

Open-source 60% mechanical keyboard PCB with RP2040 MCU, per-key RGB NeoPixel LEDs, Kailh hot-swap sockets, onboard buzzer, and USB-C. Runs KMK and CircuitPython firmware.

Wireless microcontroller board featuring the RP2040 dual-core Cortex-M0+ processor with built-in WiFi 4 and Bluetooth 5.2 (BLE). Supports MicroPython, CircuitPython, and C/C++ development.

Ultra-compact RP2040 microcontroller board in a tiny form factor. Features dual-core Cortex-M0+ at 133 MHz, USB-C, onboard WS2812 RGB LED, and castellated pads. Raspberry Pi Pico compatible.

A 48-key ortholinear mechanical keyboard designed as a distraction-free writing companion for phones and tablets, powered by RP2040 with QMK/Vial firmware and dual rotary encoders.

RP2040-powered expansion module for Flipper Zero with DVI-D video output, 6-axis IMU motion sensor, 14-pin GPIO breakout, and USB-C. Fully open-source firmware and schematics.

Palm-sized x86 SBC with Intel N150 quad-core (up to 3.6GHz), 16GB LPDDR5, 128GB eMMC, RP2040 co-processor, Gigabit Ethernet, HDMI 2.1, and Windows 11 IoT Enterprise — in the classic LattePanda V1 form

Compact RP2040 dual-core ARM Cortex-M0+ development board with USB-C, 8 GPIO pins, and beginner-friendly immersion gold pads in a 27x20mm form factor.

A compact USB-A development board and debugging tool built around the RP2040 dual-core Cortex-M0+ MCU, featuring a 1.14-inch IPS LCD, microSD card slot, and exposed SWD, UART, and I2C connectors for p

A Raspberry Pi Zero form-factor development board based on the RP2040 dual-core Cortex-M0+ MCU with 16MB flash, Mini HDMI (DVI) output via PIO bitbanging, USB-C, PIO-USB host port, microSD card slot,

A compact RP2040-based LoRa module with SX1262 transceiver, available in 410-525MHz (LF) and 850-930MHz (HF) variants, featuring 2MB flash, 20 GPIO pins, IPEX antenna connector, and castellated edge d

A compact RP2040-based module with Bluetooth 5.1 dual-mode (BLE + Classic SPP) connectivity, 2MB flash, 14 GPIO pins, ceramic antenna, and castellated edge design for embedded Bluetooth applications.

Arduino Pro Micro-compatible RP2040 keyboard controller with 8 MB flash, 20 GPIO, STEMMA QT, castellated USB pads, NeoPixel, and QMK/KMK/CircuitPython support for custom mechanical keyboards.

Tiny RP2040-based dev board in the QT Py / Seeed XIAO form factor, featuring 8MB flash, USB-C, a NeoPixel, and a STEMMA QT connector for solderless I2C sensor wiring.

RP2040 Feather board with 8 consecutive 5V-level-shifted PIO outputs dedicated to NeoPixel LED strip control, 8MB flash, USB-C, and LiPo charging.

RP2040 Feather board with a DVI/HDMI-compatible output port for driving displays at up to 800×480, plus LiPo charging, USB-C, NeoPixel, and STEMMA QT.

RP2040-powered 3×4 mechanical macropad with 12 NeoPixels, a 128×64 OLED display, rotary encoder, speaker, and STEMMA QT — fully programmable via CircuitPython or Arduino.

RP2040 Feather with integrated RFM69HCW 868/915 MHz packet radio transceiver, 8MB flash, LiPo charging, STEMMA QT, and uFL antenna connector for long-range wireless mesh networks.

RP2040 Feather with integrated RFM95W LoRa radio at 915 MHz (SX1276), 8MB flash, up to 20 km range, LiPo charging, STEMMA QT, and uFL antenna connector.

RP2040 Feather with a dedicated USB Type-A host port powered by a 5V boost converter, enabling connection to USB devices like keyboards, mice, and MIDI controllers alongside standard USB-C programming

Arduino-Uno-compatible development board powered by the RP2040 with 16MB QSPI flash, microSD slot, STEMMA QT, onboard NeoPixel, USB-C, and an RX/TX switch for serial flexibility.

Feather-form-factor board with Raspberry Pi RP2040 dual-core Cortex-M0+ @ 133MHz, 264KB SRAM, 8MB Flash, 21 GPIO, 4 ADC, 2 PIO peripherals, USB-C with UF2 bootloader, STEMMA QT, and LiPo charging. Run

Tiny 36×18mm breadboard-friendly board with Raspberry Pi RP2040 dual-core Cortex-M0+ @ 133MHz, 264KB SRAM, 8MB Flash, 23 GPIO, 4 ADC, 2 PIO peripherals, and Micro-USB. Runs CircuitPython and MicroPyth

Nano form factor board with RP2040 dual-core Cortex-M0+ at 133MHz, 16MB flash, 264KB SRAM, WiFi 802.11 b/g/n and BLE via u-blox NINA-W102, built-in 6-axis IMU and microphone, 22 digital I/O with 20 PW

Compact 32-bit 3D printer control board powered by RP2040 @ 133MHz. Designed for Voron 0.1 and small printers. 4 TMC2209 sockets, USB-C, 12–24V input. Klipper and Marlin compatible.