ESP32-S2

Pure ESP32-S2 development board with 4MB Flash, 8MB SRAM, native USB, WiFi 802.11 b/g/n, onboard LiPo charging, and multiple control buttons — a single-core Xtensa LX7 board for USB-HID and IoT applic

USB-A dongle form factor board with ESP32-S2, 1.14-inch ST7789V IPS LCD, Wi-Fi, OTG, TF card slot, and Grove connector. Predecessor to the T-Dongle S3 series, ideal for portable USB IoT devices.

ESP32-S2-based WiFi fan controller with 4 independent PWM outputs, integrated HDC1080 temperature and humidity sensor, Qwiic expansion, and native Home Assistant integration via ESPHome.

ESP32-S2-based WiFi development board for Flipper Zero enabling wireless firmware updates, Black Magic Probe debugging over USB and WiFi, and WiFi pentesting with PMKID capture and deauth capabilities

ESP32-S2 Feather-format board by Unexpected Maker with 4MB flash, 2MB PSRAM, 5×5 RGB LED matrix, LiPo charging, and STEMMA QT — designed for colorful wearable and IoT projects.

WiFi IoT automation board with ESP32-S2, built-in 1.54″ color TFT, barometric pressure, humidity, temperature sensors, DotStar LEDs, capacitive touch, and a speaker.

Feather-format ESP32-S2 board with 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, LiPoly charging, and MAX17048 battery monitor — WiFi IoT in the Feather ecosystem.

Ultra-compact ESP32-S2 development board by Unexpected Maker in the TinyPICO form factor, with 4 MB flash, 2 MB PSRAM, native USB, WiFi, and LiPo charging at just 17.8 × 41 mm.

The Adafruit ESP32-S2 Feather with w.FL is a Feather-form WiFi microcontroller board with a w.FL (MHF4) external antenna connector for extended range. It features a 240MHz ESP32-S2 single-core CPU, 4M

ESP32-S2 Feather with an onboard BME280 temperature, humidity, and barometric pressure sensor, plus 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, and LiPoly charging.

Child-oriented ESP32-S2 dev board with 4MB flash, 2MB PSRAM, 5 NeoPixels, microSD, I2S audio amplifier for speakers, USB-C, STEMMA QT, and AA battery or USB-C power support.

Bare WiFi module with Espressif ESP32-S2 single-core Xtensa LX7 @ 240MHz, 4MB Flash, 2MB PSRAM, 802.11b/g/n, native USB 1.1 OTG, and SMD pads. Intended for integration onto custom PCBs, not a standalo

Bare WiFi module with ESP32-S2 Xtensa LX7 @ 240MHz, 4MB Flash, 2MB PSRAM, 802.11b/g/n, native USB OTG, and a uFL connector for an external antenna. Drop-in variant of the WROVER for improved RF range.

Tiny Seeed XIAO-compatible ESP32-S2 dev board with 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, WiFi, 13 GPIO, and 10 ADC inputs — no Bluetooth, all in a 21.8 × 17.9 mm footprint.

Espressif official ESP32-S2-WROVER development board with dual 20-pin headers (breadboard-friendly), 8MB Flash, 2MB PSRAM, WiFi, dual Micro-USB (native USB + UART bridge), NeoPixel RGB LED, and boot/r

Espressif's multimedia-focused ESP32-S2 evaluation platform bundling four extension boards: audio player, capacitive touch panel, 3.2" LCD display, and camera module. Designed to showcase ESP32-S2 hum

QT Py-sized ESP32-S2 dev board with a uFL connector for an external 2.4 GHz antenna, 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, and 13 GPIO — for improved WiFi range.

Full-featured ESP32-S2 Feather-compatible board by Unexpected Maker with 16MB Flash, 8MB QSPI PSRAM, WiFi, native USB-C, 21 GPIO, STEMMA QT, APA102 RGB LED, ambient light sensor, and dual 700mA LDOs.

Arduino Uno-compatible WiFi dev board with ESP32-S2 single-core @ 240MHz, 4MB Flash, 2MB PSRAM, native USB-C, STEMMA QT, LiPoly charging, MAX17048 fuel gauge, barrel jack, and UNO shield compatibility

The ESP32-S2 WROOM is an Espressif WiFi module with a single-core Xtensa LX7 at 240MHz, 4MB flash, 320KB SRAM, built-in PCB antenna, native USB OTG, and rich peripheral support — a cost-effective WiFi